Satellite A505 - change standard user instead of administrator

Similar Questions

• change a user settings an administrator setup for windows vista windows

  in windows Vista, how to change a user settings an administrator setup for windows vista windows. In the CMD window, I tried running the disturbance of disk of my user ID, he comes back and says it must be run by an administrator. When I log on as an administrator id, it works well. There must be a way to reset my UserID on the admin id. When I try to go into the type of user account modification from standard user to user adminstative. It won't let me., it always defaults to the standard user even when I change ID admin ann.
  Also, when you use the Defragmenter GUI disc on any id and change the time or date, it will show the new race date, but when you click OK and return to annex it always says the next execution date is 'never '.
  Thank you

  Hello

  I suggest you to follow the steps from the links and check out.

  Change the type of user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type

  Why use a standard account instead of an administrator account?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-use-a-standard-user-account-instead-of-an-administrator-account

• How can I change Standard user to administrator?

  user title: original Standard to the administrator

  I've recently updated my laptop Compaq 32-bit of Windows Vista to Windows 7 Ultimate.  During this conversion process, both user configured as an administrator reset to standard user accounts.  Now, I don't have anyway to keep my computer.  The system won't let me change.  How can I reset the administrator user accounts?  Or, how you're going to help me change the setting?

  Let's look more closely your accounts. Please try this:
  1. click on start, then type the three letters cmd into the search box and press ENTER.
  2. type the following command:
  net localgroup administrators > '% UserProfile%\desktop\Admins.txt' {Enter}
  3. Paste the contents of the Office "Admins.txt" file in your reply.

• How can my computer change a standard user to an administrator in itself?

  I have three sons. Yesterday, I noticed that the user account for them had been changed from Standard user to administrator. This son don't know how to make such a change, even if he had Admin rights. It happened several times in the past, and after correcting, it happens again.

  Today, I discovered that the accounts of two of my sons have been modified by the Standard user to administrator. Why is this happening? How the computer can change the type of account alone?

  I checked the status of user account control, and the cursor is on "notify me only when programs try to make changes to my computer.

  Windows 7 gives me fits in too many areas.

  I login or Administrator status seems to be granted just like my wife.

  -> Have you ever checked if this happens when you start mode safe?

  Frederik, I've responded to your suggestions several times.

  -> September 5, I posted a second script and very detailed instructions. I can't see your response to it. I suspect that you have completely missed.

  When I double-clicked on the program, nothing happened.

  -> If you use the script I posted for you and follow the detailed instructions so the program will not work.

• How to change standard user to user adminstator

  How can we change from standard user to adminstator user?

  Hi maggiezonnman,

  Thanks for posting in the Microsoft community!

  I understand that you want to change from standard user to administrator user. I will try to help you with this question.

  (1) you have any administrator account on your computer?

  I have provided the link that will help you change the account type.

  Change the type of user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type

  Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• If I install a program on the standard user account affect administrative user?

  Thank you!

  He could; depends entirely on the program. And not properly written (for Vista) progam should be installed by a standard user.

• Is to let a standard user to change an administrator without concent.

  I have some difficulty trying to block access to some programs because they won't let me see them to block applications. When I'm trying to manage accounts and click on the what programs are someone else can access it will not control panel. Must have this problem fixed soon.

  Hello
   
  Let a standard user can change to an administrator account. This is possible only if the standard user knows the administrator password or if the administrator does not have a password on the user account.
   
  To block access to programs, it is required to connect to the computer as an administrator or at least know the admin password, if you try to block the program as a standard user.
   
  For more information, see the following links.
  What is a user account?
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-use-a-standard-user-account-instead-of-an-administrator-account
   
  Set up Parental controls:
  http://Windows.Microsoft.com/en-us/Windows7/set-up-parental-controls
   
  I hope this helps.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• I got my windows vista ultimate administrator standard user account.

  I got my windows vista ultimate administrator standard user account. Now whenever I try to update or install "User Account Control" is constantly asking me to (type an administrator password, and then click OK). The problem is that I can't do this because OK is disabled (grayed out) and no place to type the admin password or the other. How to restore this administrator account or even to enable the local administrator account by default here?

  Hello

  If you have another administrator user account on your computer then log in and change the account to standard user for the administrator account.   If not, then follow the steps from the link and check if that helps: how to use system restore to log on Windows 7 or Windows Vista when you lose access to an account http://support.microsoft.com/kb/940765/en-us

• Impossible to change the user account for the administrator account

  I have followed closely the instructions in this forum to change a user to an administrator account account. However, when the dialog box that allows the selection of a standard account or administrator account opens and I select the administrator account, the "change account Type" gray button and I can't make the selection. Any help would be appreciated.

  When the dialog box that allows the selection of a standard account or administrator account opens and I select the administrator account, the "change account Type" gray button and I can't make the selection. Any help would be appreciated.

  Your account is already at the level of the admin (see marked area below). You may not promote any more away.

  

• Why can´t I change a standard account to an administrator account

  I´ll try to run an application name Voipdiscount, but can't run it under a standard account? When I try to run he said only 3.0 error critical and 'engine kernel performance impossible' but I also works very well under my admin account... my account was that I created when intalled windows 7 ultimated version. I have it give administrator rights, but still does not work. And if I open the user account in the control panel I can´t change of Director. Why?

  And if I open the user account in the control panel I can´t change of Director. Why?

  You can only change a Standard user to an administrator account administrator. That's why...

• I can't change my user account type

  1. I can't change it back my administrator account type, I accidentally change standard user.
  2. How can I change it to administrator?
  3. I use window7

  You yourself effectively painted into a corner. Here's how you can jump out of it and avoid a recurrence (requires a tiny amount of foresight...):

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before downgrade you your account.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Demote a standard user account when the account was promoted to admin using a program named pclogin now

  My son used pc connect now on upgade its standard user account to administrator now when I try to downgrade, it does nothing. I can't remove it or even when I try to put this in command prompt net user 'account' / del it says not found user account. How can I remove or demote

  I was in an administrator account. When I did the brute force we were always there when I restarted the computer.

  "Brute force" involves a little more by using an administrator account. Assuming that you want to delete the folder "C:\Users\Harry, you can do the following:

  1. Reboot the computer.
  2. Logging in as an administrator account.
  3. Click the start planet.
  4. Type cmd.exe in the search box.
  5. Press Ctrl + Shift + Enter
  6. Click on "Run as Administrator".
  7. Type the following commands and press ENTER after each:
     takeown /f "c:\Users\Harry" / r
     Cacls /g /T "C:\Users\Harry."
     ("are answer Yes when asked you sure?")
     RD /s /q "C:\Users\Harry."

  Orders are not reversible.

• Can't change from standard user to administrator.

  Hello, am frustrated! Have an ebook sent to library-cannot open it because I don't have Adobe E-reader software. Tried to download it, but asked for an administrator password. This laptop was my teenagers... request him to enter his word of happening has not worked or she not sure of himself. So, I search for how to change me being a standard user to administrator. Try to do it, but after pressing change - nothing happens. I'm still a standard user! argggggh. I just want to read the E-book. Helllllp! (It's awkward, but I don't know what version of Windows, it is..) Sorry, stupid person).

  If your teen doesn't remember the password she used, here are your options: reset Windows password forgotten

• How can I change administrator to Standard users?

  How can I change administrator to Standard users?

  [Moved from the community centre of Participation]

  What administrator questions have met?

  Start here: http://windows.microsoft.com/en-us/windows/user-accounts-faq

  Additional references may include:

  • http://Windows.Microsoft.com/en-us/Windows/Security-Privacy-accounts-help
  • http://Windows.Microsoft.com/en-us/Windows/create-user-account

  You will find appropriate community support by starting your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/security

• Accidentally changed both to 'standard user' user accounts, so now there is no user "administrator."

  I changed the two accounts to standard user accounts, and now of course I can't make changes, or download anything. Whenever I try to change anything, a UAC popup window appears, but that still leaves me not chang anything. Help.

  I think that window version my computer is XP (home).

  Thanking you in advance,

  Ms. lee

  It must be a built-in Administrator account that does not remove-able.  When you get to the login screen, hit Ctrl-Alt-Del twice.  Then you should be able to enter "Admin" as user and leave the password empty (unless you have changed in the past).  Then, you should be able to create other users with administrator privileges or other functions of the administrator.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"
    <>http://support.Microsoft.com/kb/321305 >

  HTH,
  JW