Dell Dimension E521 starts and stops on its own at random times... a lot of attempts to repair/restore without success! What's next!

Similar Questions

• I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service is not...

  Original title: Journal of spooler

  I have a Dell Dimension 3000 CPU and I try to re - install a Dell 720 printer. I get the message. "Failed to start spooler log on the local computer. Error 1075: The dependency service does not exist or has been marked for deletion. I tried this diagnosticTo start print spooler service and also long-term arer services set it to automatic, follow these steps.     a. Click Start, right click on my computer and select manage.  b. in the console that opens, expand the menu Services and applications.  c. click Services.  d. click the button twice to spool print.  e. in the 'Général' tab, go to Startup Type.  f. the Automatic value.  g. click on the Start button.  h. click on apply and Ok.     Click the Dependencies tab, and not all the dependency services and repeat the steps above to set automatic and start the service.      Restart the computer after you start the services above. After restarting the computer check if you can install the printer. And a few others. Someone at - it suggestions? This printer has been operational on this computer at any given time. Windows XP Home / Firefox. .:

  Hello

  1. don't you make changes on the computer before this problem?
  2. when exactly you get this error message?

  Step 1: Run the fix it tool using the article below and check out them.

  Problems printing and printing errors
  http://support.Microsoft.com/mats/printing_problems/

  Step 2: Try the steps from the article below and check out them.

  Error message when you try to start the spooler service for printing on a Windows XP-based computer: "error 1075.
  http://support.Microsoft.com/kb/915168/en-GB

• DELL DIMENSION E521 + Windows 7

  Hello everyone - this is my first post!

  I have a Dell Dimension e521 that came with Windows XP Professional pre-installed (real key and everything).

  I bought this machine of opportunity without hard drives or disks of the driver/operating system. At first I tried using a couple of genuine oem Windows XP Home Edition activation keys that are working flawlessly on other physical machines or virtual, I had. I also had a untouched XP Professional oem drive, which, despite my genuine key did not work.

  When I tried to install XP Home OEM on a disk sata hard freshly arrived, I bought off of eBay (I wiped with activekilldisk/dbandiskwipe first) I couldn't go past the window product key during the installation of XP even if the same drive and the same key had been used without fault on my Dell Inspiron 6000 laptop among other scenarios (cleaned). I also used the same disk XP Home oem combined with the touch of the inspiron and it worked.

  I finally gave up, called Dell Sweden, said that I was not the first owner of the machine, I bought this what and second-hand and they agreed to send me the original disk DELL Windows XP operating system for a small fee. When I used this Dell disc combined with the product key on the computer case, everything worked!

  THUS, the question at issue. I want to buy a genuine OEM Windows 7 Home Premium x 64 edition, paste the label of the product key on the top of the Dell case and install this instead of Windows XP Professional. I'll be able to do this, or Windows 7 like XP before him, will stop at the product key/activation step?

  On a sidenote: as a prior warning should the original Dell XP disc to get scratched or damaged I recently created an image file with IMGBurn cloned and wrote the backup disk image. Accept my cloned copy or can the machine that's not the original?

  Thank you!

  Oh, I also wanted to talk... you said you were trying to install XP Home disks (at least some of them), but you said your license for XP Professional... Pro requires a key Pro and Home requires a key to the House, because they are not interchangeable, nor is a key "greater" good for a lower version (key Pro will not work on the House).

  "I really don't understand why the Dell key does not work with an iso-disk of Windows XP Professional without brand." The Dell machine is locked by the key original and original media? Say, original disc destroyed before performing a copy/image. »

  XP was VERY picky with his keys.  Everything had to match - channel (VL, OEM, Retail), and each has been given to accept certain keys.  Dell Media wouldn't work on other brands (not 100%, but in general), media HP wouldn't work on other brands (which is true).  The key OEM always and only belongs to the system with which it was SOLD, and it had to be only in the media use it right.  Brand of OEM disks would be auto / auto activate using a generic OEM SLP key integrated into the installation CD.  Generic OEM doesn't have this feature without the system integrator using the generator/Deployment Toolkit to implement.

  (a) Yes, you can use a copy of the installation disc - made repeatedly (fortunately I worry is no longer for XP)

  (b) Yes, you can do a clean Windows 7 install, regardless of the type of media you get; Microsoft designed to use the detail in your situation, not OEM - that's all what I was saying it.

  "Another thing with the commercial version - I only need 7 for a specific machine, not 3"

  Not sure that I am the...

• Processor Intel Core 2 Extreme QX6700 Quad - Core for dell dimension e521?

  I just ordered an Intel Core 2 Extreme QX6700 Quad-Core processor to replace my old amd athlon 64 3200 + for my dell dimension e521 BIOS (version 1.1.4).

  I just want to know if the new processor will work with dell dimension e521 system.

  my PC:

  AMD athlon 64 3200 + 2.00ghz

  6 GB of ram DDR 2

  1 to hidden

  AMD radeon HD 6450

  ...

  Thank you

  Nope.  Intel chips use different chipsets and different the SB of AMD processor sockets.  If your computer is equipped with an AMD processor you must upgrade with an AMD processor.

• Dell Dimension E521 Setup - locked out of installation, do not know how to reset the password

  Hello. I have a problem with my Dell Dimension E521.

  On the Setup screen when I press F2, I added an administrator password in the security field.

  I thought I knew the password, as I had written somewhere, but I can't.

  I don't know how to reset the password - it told me to remove the admin password by entering a blank password in the new and confirm

  password, but it won't let me move down.

  Can someone give me directions as to how can I reset my password without having to re - install my OS again? Thank you.

  My computer specs:
  Model: Dell Dimension E521

  RAM: 2 GB

  Model and the speed of the processor: AMD Athlon Dual Core 2 GHz

  OS: Microsoft Windows Vista - Home premium (32 Bit edition), service pack 1

  Locate the password jumper 2 pins (PSWD) on the system board and remove the jumper to clear the password.

  It is located next to the PCIe location.

• iOS 10 times to start and stop the music messed up

  I'm running a SE 64 GB iPhone with iOS 10. Many songs from my iTunes library has some moments of power, but after update, they are all mixed. Songs don't start or stop when they're supposed to, or they're going to start and stop at a random time, which is annoying. The same problem was in the beta, causing me to backup on iOS 9. I assumed that this bug would be fixed in the final version. All the solutions in addition to remove and re - download my library?

  Hello Carnage1215,

  Thank you for reaching out to the Community Support from Apple. I understand your music has had some problems and I want to help him. By the sounds of things that your songs start may be delayed or in the middle of the piece, is that correct?

  Before you make too much trouble shooting, it's a good idea to make a backup of your iPhone If you don't have it already. If you do not know how to save your phone from this article will guide you in the process: the backup of your iPhone, iPad and iPod touch

  Once you have made a backup, I would recommend to reset all the settings on your iPhone. This will ensure that all old data of a version of iOS parameter are removed and reset default. This removes all data and applications, photos or contacts, but it removes all of your preferences for the Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, contact ID, brightness & paper painted and privacy, then you may need to define these things upwards after this reset.

  Do this please go to settings > general > reset > reset all settings.

  If you always use the same behavior after you restart your phone, please inform the community. We are all here to help.
  Best regards.

• My Mac Mini is extremely slow and any video will start but soon stops and intermittently starts and stop immediately. What is the reason?

  My Mac Mini (end 2012) 2.5 ghz memory 8 GB Yosemite 10.10.5 is extremely slow. I read a few articles on communities, but unable to solve the problem. I plan to upgrade memory soon. In addition, a video game doesn't quite work. It starts and stops in 5 seconds and restarts it for a few seconds and stops completely. An advisor to fix the problem will be appreciated.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Satellite A200 - gel of start and stop display driver

  Hello, I have some problems with my laptop A200 which has little almost 3.5 years.
  The most serious problem is that the computor, lately takes up to 3 attempts for it to operate. or stops on its own even when it is plugged in, it does not regularly, but often enough to be a big pain in the prevurbial, especially when in the middle of an assignment (yes I frequently back up), the fan seems to work ok. I don't know if there is a driver problem which is not showining when I run Device Manager, a diagnosis by toshiba pc diagnostic or an update of direct driver (which has never been required) or microsoft diagnosis. my main line of thought, it's that there is a problem with the extension of file or memory.
  Error extending file Q1 can cause this problem? How to fix file extension problems without spending any money – if possible?

  When I plug in an external display quite often the driver display often stop reesulting in a full freeze that requires the use of the Task Manager or reset by turning off the computor and the bad news of restart - really.
  Q2 How can I fix?
  I've updated the bios and I all current updates.
  The pointers, help etc would be greatly apecieated.

  Hey,.

  To be honest I n don't know why you think about extensions of file if your laptop turns off by itself, it could be an overheating problem. The laptop would be closed to protect the equipment.
  Never clean your laptop before? If you already have for 3 years and a half there a lot of dust in the cooling fans use so jet of compressed air to blow out the dust.

  Regarding your second question: have you installed most recent display of page download driver Toshiba driver? This is important because Toshiba display drivers are pre-tested and designed for this model. So they work correctly and no problem to don t.

  I hope I could help you a little bit ;)

• Satellite A200-1FL: cooler starts and stops every minute only with battery

  Hello.

  I just bought an A200-1FL and I test these days. I noticed that the cooler starts and stops every minute about when I use it only with the battery.

  Disconnected from the power, even if I do not have too much, just browse the Internet. Is this normal?

  If I work with trendy food, the cooler makes no noise.

  Thank you.

  David

  Hello David

  Do you also have it tested with different profiles in power options (balanced, power saver, high performance)?

• Complete noob - would like to measure the voltage to manual start and stop

  Hello

  As the topic says I'm a complete noob when it comes to programming OR.

  I'm looking for someone to point me in the right direction

  Installation program:

  Windows8 office

  Visual Studio 2013

  NI 6255 PCI data acquisition card

  Block connection OR SCB-68

  What I want to do:

  I want to write a console application to measure the voltage on the signal ai16

  -I want to be able to start and stop the application manually

  -I want to be able to pressure measured in a CSV output.

  Where I am:

  I compiled and ran the example "NOR-DAQ\Examples\DAQmx ANSI C\Analog In\Measure voltage.

  It is said that I have "collected" samples but I don't know what that means, as I do not see an output file...

  What I don't understand:

  Samples - I do not understand cela or know even where to start

  How can output file - I get the file to save the collected data.

  Thanks in advance

  Chad

  Hi Arron

  Thanks for the link, unfortunately, it has not helped because the instructions were for Visual Basic and C++ not. It was my fault for not putting the language of prog that I need help in my original post.

  However, I started to find help on this link: http://www.ni.com/tutorial/5409/en/

  -With the help of NOR-DAQmx in text based programming environments

• I want cRIO to start and stop the acquisition by push physical button on the cRIO, is this possible?

  When you use my cRIO 9024 on the ground, I prefer to be able to start and stop the acquisition with pressing a physical button on cRIO.

  I want to say I don't want it to be "as a start-up," I don't want cRIO to start the acquisition as soon as the power supply is ensured.

  Is this possible?

  Hi Cashany,

  you will surely find this switch status. But there are easier ways (but more expensive) for a button. Fiddling with a pen or a small screwdriver to switch USER1 is not what I call "user friendly"...

  -You have at least 2 voltage inputs on your module available. Use a switch voltage on the power inputs. Use a 'real' button!

  -You have an available serial port. You can set some pins on GND or voltage and check their status inside the cRIO/RT target...

• Start and stop a loop automatically subtracted at each iteration

  Hello

  I know that there are some topics about this, but I couldn't find any solution, especially because I'm using version 7.1 and cannot open files from new version.

  My problem is the following:

  I need to load a tank of 6 to 10 in the morning, every day for 3 days. The process should start and stop automatically, which means, no funds to start or stop. Start and stop conditions come from time.

  I start with a big loop of 72 iterations, which is 72 hours.

  The tank must start at level 6, whenever he starts.

  After the departure, 1 unit must be subtracted to each iteration. That means, that the tank is level 10, at 06:00 07:00 level 9 and so on. At the end of the day, at 10:00 the fill level is equal to 2.

  The next day, the process must start again and the tank must start at level 6.

  Any suggestions? Thanks in advance.

  Hi Florian.

  Thank you for your message. That solved this problem, but in fact my VI did not work as I wanted.

  I created a new one, with and an external file from 1 to 24, repeat 3 times. Now I got it. Maybe there is a better way to do it, but it works now. Thanks for all the help. I appreciate a lot.

• use of an input signal to start and stop screws

  IO have a Vi that must be started and stopped by a signal from a sensor on an automated production line. the problem is that the Vi I created to capture and compare images from a webcam placed on a robotic arm that is used to fasten the screw in part needs to be started and stopped a man using the screw that is "run" buttons located at the top left of the façade of the screws. How can I use an input of probe signal (+ 5 V for 10 ms) to statrt and stop the Vi? The Vi cannot be allowed to run when there is no room for the robotic arm work, it would consume electricity that costs money.

  No program in any language can be started by an external signal.  Some software must be running in order to detect the signal.  If this software is an integrated program running on a microcontroller or a multiprocessor supercomputer it still works the same way.  The power required by the computer is probably low compared to the power consumed by robots and other manufacturing processes.

  As you have described your system, you will need a computer that runs all the time while waiting for something to happen on the Web site, which indicates that a paypal transaction has occurred.  What is different from having a computer running LV with a VI in an idle state?

  If your process needs to be thrifty, you expect better have enough orders that you turn the whole sytem market very often.  The cost of automation of all would be excluded by the income of sproradic.

  It is certainly feasible to have a master computer that controls the power of certain parts of the system that are not needed at all times.  PLCs are used to control the State strong relays or contactors put different subsystems.  Make sure that time is allowed for systems comes on and initialization before you begin production.

  I would focus first on getting the automation of a condition but inactive of working before trying to go to the complete power down and control.  I think you will find that the power process will require sitting in a State of inactivity for some parts of the system while the other parts are being initialized, you will need to do in a State of rest.

  Lynn

• Why my computer does not delay when I try to watch the video again? It's a constant start and stop and buffering?

  I get a lot of golf maaterials and lesson over the internet.  It became a real pain and a problem for me to keep up with instructions.  When I received instruction to internet and start to play the video it winds and winds and play them for a few seconds then start and stop throughout the presentation.  What can I do to fix this problem?

  If several computers are using the internet at the same time, it might slow down the video stream on a computer (laptop or desktop).

  Or your internet connection is simply not enough fast to stream the videos you want to watch. There are several different speeds for DSL, so the speed increase may help.

• How to start and stop a task with c#?

  Guys,

  I need a help. I'm trying to reproduce a task created using Meansument & Automation Explorer. The task is very simple create a channel of digital output and send the values 0 or 1 to enable and disable a relay in my board DAQmx.

  Kind regards

  Alexander has.

  I found the solution, add a new item in solution using Add new item choose component or and together the configurations such as a task type that you need. The issue will create a class for your task, this class has all the events to start and stop a task, and you can add your new methods if necessary.

  Thank you all.

  Alexandre Albuquerque