Dell Inspiron 5160 - screen showing red, green, blue, white, black alternatley

Similar Questions

• HP Omni 120-1050xt: screen goes to red, green, blue, white, black after upgrade to Windows 10

  When the PC is idle, the screen turns red, green, blue, white, black, and every time I need to turn off the machine. He said "best driver for your device is already installed" - Intel HD Graphics. I tried to uninstall, install.

  Greetings,

  HP not support your PC when you run Win 10.

  I suggest that use the "Go Back " process win 10 ASAP.

  If this is not possible because of your graphics problems you'll have to do a restore to factory HP.

  I can help you more with this if you wish.

  If the upgrade was forced on you there are ways to stop the involuntary update.

  Let me know if you need further assistance.

  Jay

• Now 23-d044 - installed MXM video card - HP Envy screen flashes red green blue black

  Hello

  I'm a 23-d044 I wanted to do the update/install video card instead of using the integrated graphics card.  I tried two different cards, a nVidia GeForce GT 540 m 2 GB and a part of HP AMD card #707804-002.  In each case the applied heat sink was part HP #694456-001. In each case, whenever I go back to the PC and it works, the screen flashes red, green, blue, black, white to infinity. I have read these and other forums indicating that this is a fault with the GPU, but I find that is unlikely given that I tried two different cards. I thought that maybe the MXM connection on the motherboard, but on the original motherboard power connector was defective, I have since replaced the motherboard (about 2 weeks ago) with the same part number. I downloaded both the AMD and nVidia drivers the most recent for each card (while running the integrated graphics card), but not joy.  Anyone have any ideas?  Thanks in advance for the help!

  Sean

  Sean, I had the same problem too.  I finally thought to it.  Just above where the grafics card go is two connectors and one of them has a plug in there.  above the connectors, said uma_lvds, the other says MXM_LVDS.  Swap the power cord of the uma_lvds to the mxm_lvds.  This will fix the problem and you will be running.

• Toshiba Kira - screen flashes red green blue black

  Hi all

  I have a Ultrabook Kira I bought last year and it worked fine until about 3 months ago.

  But now he has a problem with the screen as follows.
  She suddenly starts cycling continuously full-color on-screen, and then sometimes it returns to normal for some time and randomly goes back again to the annoying cycling colors.

  Depending on the problem, it will loop the following exact sequence of colors: red, green, blue, black, gray.

  I don't think that it is a loose cable problem because it goes into the problem and comes back without any movement of the machine.

  I mean, the machine itself starts the dysfunction and restores normality by itself.
  These days, I can't work without an external monitor, since the problem is now practically constant.
  I've updated the bios but the problem remains.

  I searched for this problem all around the internet and could see that many people, who bought this laptop model, have the same problem. Thus, it seems to be a failure of the design.

  Thank you!

  > These days, I can't work without an external monitor, since the problem is now practically constant.

  For me, it would mean that the graphics card is OK and the problem must be linked to the internal display.
  However, it looks like hardware problem and that's why I recommend you contact the after-sales service provider authorized to set especially if the warranty is still valid.

  Your comments would be appreciated

• 2407WFP Power Save mode - only flashes red, green, blue, black, white, repeat

  Hello

  My 2407WFP won't go into fashion, economy of energy even when the computer is off. (He used to do this properly).

  When the computer sleeps, turned off, or when the cable is disconnected, the monitor will be full-screen flash red, green, blue, black, white, then go to sleep for about 5 seconds. Then, he repeats this sequence instead of going right to sleep/wake.

  Different computers, different cables, no change. Is it possible that this is somehow the self-test mode?

  Thank you.

  * Turn off the monitor
  * Press and hold the plus button and menu button at the same time, and then click the power button
  * Once back on, press the "-" and the service menu should appear
  * Press the button "-". The Service Menu should appear
  * Scroll down to Burnin Mode using the button ""
  * Press the Menu button to turn on this setting
  * Press the button "-" to turn it Off (it should be blue when selected)
  * Press the "+" to highlight the Menu exit
  * Press the Menu key

• Dell inspiron 530 will not start 4 beeps power black monitor blue button solid yellow lite inside

  I HAV a dell inspiron 530 inter processor duel completely stock w vista... when I push the button to switch the fan to come on the button lights up blue then u hear 4 beeps and inside ther is a yellow solid lite on next to the motherboard no power to monitor usb black fan and s stays lite on the back is green as it should b what is problem It can b fixd can I solve this w taking some1 working inside a computer im alittle above a recruit n do thx mike

  maheisel

  Four "beeps", could indicate a memory problem, if you are comfortable working inside the computer, try to open the case, remove and reinstall all memory modules and see if that makes a difference.

  If you not comfortable working with the removal and the reinstallation of the components, then I suggest that you take the Inspiron 530 to a repairman.

  Is the power button LED, blue constant or flashing blue?

  Every change made to the 530 recently?

  The Inspiron 530 convenience store and the diagnosis Codes are HERE the ADMIN NOTE: broken link has been removed from this post by Dell >

  Bev.

• Dell inspiron 7559 screen brightness flicker

  Hi, I recently bought a Dell Inspiron 7559 for school, my first laptop ever. It took me about 6 months to finally decide on a laptop, and I am very happy with it... it's beautiful. But I had two problems with the display. First of all, there is a slight yellow discoloration on half right, not a big problem, just my OCD, probably just a backlight bleed or something. But the big problem is that the brightness of the screen flashes constantly. I can only really noticed on the lowest brightness, but I use those so it's a problem. I've tried EVERYTHING. Tons of pilot fiddling, fiddling power supply option. I can't say if it sparkles in the bist of screen or the lcd screen of the bios, but I have disabled the NVidia intel HD graphics drivers and and no matter what I do, it still flashes. This makes me think that it is a hardware problem. If someone has an idea, I would really appreciate it. Do I have to send in for repair, or simply wait a little I read online somewhere that the lcd backlighting should "settle" so he can stop the blinking with takes a decent amount of screen time. Sorry for the long post, but this is my first pc, and I'm a bit picky about the function of my things. Thank you.

  How long have you had your xps and don't know if it's a hardware failure?

• Dell Inspiron 560MT desktop shows as laptop in devices and printers.

  Original title: My Dell Inspiron 560MT Office presents itself as the laptop & is now described as a laptop in the devices & printers after installing Microsoft updates.

  I did a back to factory reinstall on my windows 7 destop & the appropriate icon on the desktop & description appeared in the devices & Printers: he has been described as a Dell Inspiron (I think or something like).
  After searching & install microsoft updates the desktop icon ichanged to an icon of the laptop & my PC has been described as a laptop.

  I downloaded the Microsoft Mr Fixit 50527 listed on this site (see below) for this problem. My icon briefly changed back to a desktop computer - I don't know if the text changed cell phone on the desk, as the icon returned to be very quickly - new: a laptop so I couldn't verify this.

  Same question here.

  Resolved with this patch microsoft form http://support.microsoft.com/kb/2403006 it changes the realistic icon and a good device

  It happened again - the icon changed to return a laptop icon & I am looking for more information, but some things seemed quite complicated.

  In any case, I wondered what would happen if I unchecked "replace generic icons & then Microsoft has set as the fix has worked before, but only very briefly for a few seconds before changing to the wrong laptop icon.»

  So I just did--
  A click with the right button on the laptop icon
  Clicked on the device (from the list who came)
  Click "replace generic icons.
  Then I did another Microsoft fix (I mentioned previously on this post) & it seems to have WORKED.

  It now shows the correct icon (an office) & information
  Reference of the manufacturer Dell Inc.
  The Inspiron 560 model.
  Model number 0.
  Categories office computer.
  Description not available.

• My computer screen (flat screen) shows the colors Blue and green neon.

  What can I do to solve this problem.  My resolution is higher than 32 bit.  I'm on Vista.

  Hi Zululand,

  Thank you for your message.

  "BLUE COLORS ARE COMING BEHIND MY PHOTOS AND MY ICONS"

  This happens anywhere else outside the office, where are your icons?

  Here is an article on the reinstallation of the drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See the section "manually install the drivers' specifically.

  Even if the driver says it's OK for the graphics card, I would like to reinstall it.

  
  

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Dell Inspiron 1520 screen brightness adjustment does not

  When I try to adjust the brightness of the screen by pressing the Fn key and pressing the up/down arrows, nothing happens. I finally found it to work several months ago. I downloaded Dell Quickset and BIOS update today, but this does not solve the problem. Any constructive suggestion appreciated.

  Brian

  I just tried this and IT WORKED! I don't know how much luck you'll have, but try the Fn key and pressing the up and down arrows while your computer starts. It worked for me. For my Inspiron 1420, I adjusted the brightness, while he was when the screen went black and the words "Microsoft Corporation" above and the Green loading bar going across the screen. That's what I did and I hope it works for you! :)

• the Dell inspiron e1505 screen sometimes darkens.

  the screen of my laptop will sometimes Dim, can you tell me why?

  Check your power settings to see when your screen turns off.

  Control Panel, Power Options, click on choose when turn off the display.

  Click on the drop down menus and adjust to suit.

  You can also click on change plan settings for the on that moment, you are.

  Then you can view, change advanced power settings.

  Take care and read parameters carefully, note your changes.

  If a change occurs, that you do not want or like don't worry,

  Just go back, click on change plan settings then click on restore by default for this plan.

• My Dell Inspiron has developed the Red saturation.

  I tried loading with the CD and it will start correctly most of the time.  But he'll be back with the Red saturation more.

  I have run diagnostics and through the process, he will correct the color scheme. But will return once again to more red saturation.

  Can someone tell me how to fix it?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  If it works fine in safe mode, and then try to restore the computer and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  It will be useful.

• Dell inspiron n5010 screen turns white

  When I charge the laptop, the screen goes to a sparkling wine as white unless I push on a certain task on the top of the screen to the middle... can someone please tell me what is wrong and what needed to be fixed... Thank you!!

  Check if the image is OK on an external monitor.  If this is the case, replace the display board.

• Precision device 60 spitting red green blue color bars

  Hello world.

  We have two precision 60 camera running SpeakerTrack through a C40. Camera works fine but the other one spits of the colored bars - see below. Reboot the camera solves the problem for a week or two and then it returns. Someone saw something similar or have any ideas why this is happening? The system of control of the House is a Crestron DMPS300C. Is it possible that the code on what could be triggering some mode in the camera?

  Any help would be appreciated. See you soon.

  camera_bars.PNG

  

  Hi David

  Greetings of the day!

  If even after the upgrade to version TC7.3.6 of such software suggested by Magnus above, problem persists, you can perform the reset of the camera of the P60.

  Here is the procedure to perform a factory reset:

  1. Locate the button hole of PIN at the back of the camera.

  2. use a pen or similar to push that button reset for 10 seconds.

  3. the camera will be LED in red over the factory reset.

  4. when the reset is complete, restart the camera and the camera LED lights.

  You can also check out the link that explains the above procedure to perform the factory below reset the P60 camera:

  http://bcove.me/f17trop2

  If even after the factory reset issue persists, you can contact TAC and they can provide you with the replacement of the camera of the P60.

  Concerning

  Radhika Sajan

• We have installed lightroom CC 2015 and imported some photos when we change to develop we get the image displayed as a heatmap with only red/green/blue points/lines. All filters are disabled...

  

  Hello roberto,

  Please follow the steps below.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  
  

  Let us know if that helps.

  Kind regards

  ~ Mohit