Dell Inspiron 5520 - ePSA turns off

Hello and thanks for your help! I have a Dell Inspiron 5520 in which I replaced the hard drive. Now when I run the ePSA test powers off the coast towards the end of the test during the memory test. Is this thing toast? Any help would be appreciated!

The result of this test does not end up be a problem - the new hard drive now work very well in the system after a clean windows install.

Tags: Dell Laptop

Similar Questions

  • Dell inspiron 1525 laptop turned off and the sleeves to the top down and will not download anything

    Original title: inspiron 1525 will not download anything

    After being on my laptop for about 30 to 45 minutes it stops and it is very hot on the bottom.  It is not the battery.  She radiates from the bottom at the top of the computer.  I also can not download anything on this laptop.  I have checked everything and does not know what the problem is.  Any help is appreciated.  Thank you.

    Hi GayleMcClain,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    3. what happens when you try to download? You receive messages or error codes?

    You can check first with Dell support about the issue in connection with laptop closed and heat thoroughly.

    Check the link for Dell technical support:

    http://support.Dell.com/support/index.aspx?c=us&l=en&s=Gen& ~ CK = mn

    Hope this information is useful.

  • How to put the webcam brightness contrast dell inspiron 5520 win7 64 bit

    Dear Sir

    I use a software of the webcam that offers no options for the webcam (bright, contrast, pixel... etc) so I want to put the default webcam

    my knees: "win7 64 bit" dell inspiron 5520

    I tried dell central webcam, but I put its setting only but not a global setting default

    Thank you

    Good bye

    Hi AhmedOsama,

    Double-click the Central of Webcam system tray icon or run Dell Webcam Webcam in menu start.
    Click settings in the central window of the Webcam, then on image control. With the image control, you can adjust the settings for best video quality under different lighting conditions and also to restore the default settings.

    By clicking on the photo control icon will display the following screen:

  • Problems encountered during the upgradation of windows7 for windows8 in my laptop Dell Inspiron 5520.

    I'm halfway to the upgradation of windows7 for windows8 in my laptop Dell Inspiron 5520. I wonder to uninstall software for USB 3.0, Dell stage, Bluetooth, ports etc. of windows7, citing compatibility problems. How do I proceed? Similar software will be installed during the process once I have finished installing windows8? Because now, my internet connection is through the USB data card. Please advice of emergency

    What I suggest you do is download Windows 8 and create a bootable on a Flash DRIVE or DVD you can do an offline installation. Although the wizard upgrade of Windows 8 is the first download before to actually copy the files.

    You can uninstall the proposed components that affect the download installation files.

    See:

    http://techingiteasy.WordPress.com/2012/11/06/part-1-how-to-upgrade-using-the-Windows-8-Upgrade-Assistant/

    then:

    http://techingiteasy.WordPress.com/2012/11/07/part-2-How-to-upgrade-using-the-Windows-8-Upgrade-Assistant/

  • Dell Inspiron 5520 - replaced Hardrive now what?

    Hello and thank you in advance for taking the time to read and reply to this message. My hard drive recently failed on my Dell Inspiron 5520 (Windows 7), and I replaced it with the HDD of 80 GB of my old Dell Inspiron E1505 for cleaning. Question is, now what? I have a few options:

    (1) I have a laptop HP with Windows 7. I can somehow create a disk usb (or cd) to reinstall windows 7 on my Dell 5520?

    (2) if not, then download the appropriate Dell recovery media and put it on a Usb key? (or CD)

    (3) otherwise, then I should order from Dell recovery media CD? Is this my only option?

    Thank you for your help, much appreciated!

    1 n °

    2 No.

    3. Yes - you will need to call Dell to buy the support of recovering your system - it will cost about $25 in the United States.

  • Inspiron 9300 screen turns off after the Windows Logo screen

    Inspiron 9300 my wife became severely infected.  I thought I had some weird things start popping up of the problem decided to wipe the hard drive and start over.  Unfortunately, I don't have to restore disks when I bought the computer.  I install windows xp pro service pack 2 full retail version.

    Installation was not a problem until I installed the driver ATI Mobility x 300.  I followed directions for installation from the website, do the installation of xp followed of the dell system software update followed of chipset followed video driver.  After that whenever I put on, the screen turns off after the Windows Logo.  The computer is still running and if I plug an external monitor everythng is fine.

    I tried all the troubleshooting tips I've seen in this forum.  I did a full install twice. made of safety boots (all right), started in VGA mode (works fine), I ran diagnostics from fn on startup, including express, extended and video tests and they pass all the controls.  I'm sure it's a software problem, but have been unable to solve.  I've updated the ATI bios although when I run it says already installed and done one installs x 300 driver on 6 ttimes own.

    I know it must be something simple that I'm missing. My system is the Inspiron 9300 with 2 GB of ram and the mobility x 300 card.  Any help would be appreciated.


  • Computer Dell laptop XPS L421x turns off randomly

    My battery is fully charged, the laptop rather new stops just at random.  I don't receive any message until the computer turns off.  When I turn on the back, he asks if I boot safe mode or start the computer normally. (still no error message)

    I did not bring any changes on the computer, I mainly use Word, Excel, PowerPoint, Outlook and Internet Explorer.

    Any ideas?  I think it's because an update has not been successful, but if so, don't know how check/repair.

    Hello, Bernadette.

    Thanks for posting your query in Microsoft Community.

    From the description of the problem, your laptop Dell XPS L421x turns off randomly after that Windows Update has failed. I understand the inconvenience for you.

    To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

    1. you receive an error message or error code?

    2 did you do changes on the computer before the show?

    You can check the updates recently installed that caused the problem:

    See the Windows updates are installed

    http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

    I also suggest you to check the error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

     

    Open event viewer

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

     

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    In the meantime, I suggest you perform the clean boot and check if the problem persists.

    Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 3 of the article mentioned above.

    I hope this helps. Reply with more information about the issue so that we can help you better.

  • 962 Printer Spooler Dell all-in-One turned off.

    When I try to print, it comes back with the spooler is turned off.

    Then I find that it does not find the printer to print.

    However, I can scan from the printer to a file and that works very well.  The fax seems to work, too.

    I have unplugged, rebooted the whole system several times.

    I inserted the original disk and reinstalled the printer thinking that a driver is missing.

    I have Windows 7 and nothing has changed so far.

    Solution?

    I suggest that you see the advice of PudgyOne in this thread of community Dell:

    http://en.community.dell.com/support-forums/peripherals/f/3528/t/19306940.aspx .

  • Green flashing on HpPhotosmart 5520 when turned off.

    I recently installed the above printer and everything works fine. However when I turn off (on the computer) to the night is a little green light blinks constantly. is this normal or is something of not properly connected?

    As far as I can see th is stable when the printer is powered on and functional.

    Any help would be appreciated thanks

    Licorice

    I understand. This light flashes as it informs the printer that something is plugged. If you take the power cord out, not flashing. The light is just for the power cord power supply/notification works properly.

  • How to turn on the stereo mix on Dell Inspiron 5520?

    Hey,.

    I am looking for a couple of hours now, trying to find why my computer dell laptop isn't has the option of stereo mix as in any normal laptop, and really - I'm desperate!

    First of all, I tried to install the Realtek driver, which does not work. Looking all over the web, find a lot of dell without the stereo mix option, I finally found this topic.

    I think that there is no hope... but mabye, someone has already found a response. After all, how it is possible that dell WILL NOT SUPPORT stereo Mix Option?

    Please, read the section above before suggesting anything, because I tried also what appears there and could not find my solution.

    Thank you very much,

    AngelOfLight.

    Update: I just follow this picture and it worked:

  • Dell coming 8 Pro turned off and won't turn back on...

    It's a whole new Tablet (arrived 6 Mar 14) and just went through a sequence of update. At first, I thought that the Tablet has been reset as part of the update, but it's now more than an hour and I can't activate it. The Tablet is warm to the touch, I withdrew from the case that I had JUST (case Dell manufactured). What can I do?

    This is the same "bug" / question I have described here: http://en.community.dell.com/support-forums/mobile-devices/f/3824/t/19565817.aspx

    Try to maintain power button for about 10 seconds, let go, if it does not turn, try again several times, if it doesn't turn, hold it for 20 seconds. I don't know what is the cause, but I am flowing in it also.

    After getting working again, do an update of the bios A05.

  • my inspiron 1525 monitor turns off (black) when the charger was pulled from the wall outlet.

    I bought an inspiron 1525 laptop. After using it for 1 month, I noticed that every time he is in charge in a wall socket and you it out, the monitor will go black but the computer is always on and you will need to reboot again to get a picture in the new monitor.


  • Dell inspiron n5010 screen turns white

    When I charge the laptop, the screen goes to a sparkling wine as white unless I push on a certain task on the top of the screen to the middle... can someone please tell me what is wrong and what needed to be fixed... Thank you!!

    Check if the image is OK on an external monitor.  If this is the case, replace the display board.

  • Where can I download my CD/DVD-ROM drivers for my dell inspiron 5520 running Windows7?

    I have recently reinstalled Windows on my laptop. I installed (maybe all) drivers. I don't know the icons of CD/DVD in my computer.

    Can I have the link to download it please?

    Thanks in advance,

    Nikhil

    No driver is required - Windows have the driver.  Does the BIOS (F2 at startup) to see the drive?

  • Maxx Audio does not work on Inspiron 5520 Win 7 64 bit (start-up Maxx Audio has no effect)

    Hello

    I am running Windows 7 Professional 64 bit on my Dell Inspiron 5520. I have installed audio drivers available for this product (http://www.dell.com/support/drivers/us/en/04/DriverDetails/Product/inspiron-15r-5520?driverId=X8MPY&osCode=W764&fileId=3075592661) and the installation was successful. (i.e. no error displayed during installation)

    However, there seems to be no effect on the audio whenever I have switch between MaxxAudio modes or turn it off completely! (using the control panel Audio Dell). Pressing the quick set button shows the audio mode has been changed, but it has no effect on the audio.

    Really appreciate any help to understand what the problem is.

    Thank you very much.

    Hi mluvis,

    Welcome to the community.

    I suggest you to update the chipset driver and BIOS. Please click the below mentioned link which will take you to the site of pilots:

    http://Dell.to/QjjZDA

    Enter the serial number of the computer and choose the operating system installed on the computer. Please upgrade to the latest version of drivers and BIOS for your PC.

    In addition, you can click on the direct link to the drivers from your system:

    http://Dell.to/TvHqK6

    NOTE: Make sure the battery is more than 30% of load and the power adapter is connected during the BIOS update.

    Once the BIOS and chipset driver is installed, restart the system and install the audio driver.

    If the problem persists, perform the restore of the system for the date, that the audio was working properly. Please click the below mentioned link to perform a restore of the system:

    http://Dell.to/VRG2ad

    NOTE: The system restore will remove all applications installed after the restore point.

    Thank you & best regards
    Mustapha S
    #iworkfordell

Maybe you are looking for

  • Satellite A200 for XP partitions

    Hello everyone. I'm new here and with knowledge very catchy on computers. But I have a question about my Satellite A200 1AG. I use Vista in it, but now I need XP for some applications used for my work. I made a partition of my hard drive and I would

  • Vision image acquisition

    I have image acquisition via a USB camera to a 12 speed.  The problem I have is to save these images.  If I save these images while acquiring data, the program cannot keep up at this rate.  I need a way to get images to 120 and then save them once th

  • Don't let me sighn in windows

    Hi I just recently was dooted on my computer for some reason any without the knowledge and had to get and password administrator or power on password and the code I got was working fine but now its not letting me log Windows even though I know 100% t

  • How to disable never search updates

    How to disable never search for updates in windows 7 to restore the automatic Windows Update

  • Attempts to connect to the Dell V505 printer wireless set up - get error "WSD Print has not a driver" peripheral.

    I'm trying to set up a printer Dell V505 to a Dell Studio laptop running Windows 7.  I followed an indicating knowledge base article I want to uninstall my driver from dell and installed by using the Windows Vista SP2 compatibility mode, what I've do