Dell Latitude D610 Audio does not

Similar Questions

• my Dell studio 17 audio does not play on tv with hdmi connected but the video is very good

  I have an old Dell Studio 17 tour with dual processors core T6400 4gig and every time that I plug the HDMI on an external device, the sound disappears on the pc and the tv for 2 years, but the video is great. It never worked, but was not important until lately. Even though I attribute the correct connection including video and audio, no luck.

  Check with Dell support. It may still be under warranty.
  http://www.Dell.com/support

  Thank you

  Marilyn

• By mistake I disabled all user accounts and cannot connect to my dell latitude d610 laptop computer. Tried going into the bios and turning off everything, what does not work!

  By mistake I disabled all my user accounts and cannot connect to my laptop, the Dell Latitude d610. I tried to restart in all modes as well as rotating directors passwords and disable in the bios. Nothing works!

  Hi kathleenvickers,

  1. How you have disabled all the user accounts on the computer?
  2. What do you find in the login screen when you restart the computer?

  See the articles below and check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE?

  MY DELL LATITUDE D610 HOW CAN I UPGRADE TO THE NEW VERSION OF WINDOWS? NOW IT IS WINDOWS 7, WHAT VERSION IS SUPPORT FOR USE WELL ON MY DEVICE? PLEASE HELP ME

  Read this: upgrade Windows 10 Dell Latitude D610

  Take a look at my answer, complete instructions.

  Basically speaking, Dell officially supports Windows 2000 and Windows XP on Dell Latitude D610 (and other models of Dx10).

  However it can really run Windows Vista and 7 at least, as long as you max out the RAM (2 GB, 2 x 1 GB, can be purchased at a great price in eBay) and install the drivers, in particular graphics drivers, look in Device Manager and see what drivers are needed manually.

  If you're lucky to have a D610 with ATi graphics card then you can even run Windows 8 and 10 with all drivers available, and I can tell you that it won't be slow dog not unlike a lot of people say, I don't have something similar (a HP Compaq nx8220) in common use. Keep as lean as possible (not bloatwares, anti-virus etc.) system, and it will serve you well.

• Embeded audio does not open

  After you download Firefox 13, when I open the page index.html embeded audio does not appear on the page. However, if I go to the menu bar and click on help, Firefox Help, audio image appears and the audio works.

  Solved. The problem turns out to be conflicting plug-ins. The description can be found at [_ http://kb.mozillazine.org/Mozilla_Suite: _Issues_:_Sound] the oldest of its plug-in for Windows XP is in conflict with the new windows for Firefox plugin.

• Beats Audio DOES not work after update windows 10.

  Beats Audio does not appear in WIndows after upgrading Windows 10. The icon is missing from the system tray, control panel and in the search bar. Cannot find the drivers in the HP store.

  Guys, please help. The audio is not good without configuration Audio Beat.

  Thank you

  Jain darshan.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, press and hold the Windows key and press R

  In the run window, type devmgmt.msc and press to enter.

  In Device Manager, expand sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, reboot the laptop and let windows load completely for a few minutes before checking.

  Kind regards

  DP - K

• Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  Audio does not work with bootcamp drivers on windows 10 6 (tried on macbook pro 13 mid-2012). Is there a solution?

  You have all Audio devices in Device Manager? How Windows 10 has been installed on the Mac? The BC Assistant has been used?

• XJ437PA #ACJ: Pavilion DV6 - Audio does not

  Hello

  The audio has stopped working in my laptop since these days. It started with the audio does not not intermittently, but he has completely stopped working. I shared my PC specs below:

  Product name: HP Pavilion dv6 Notebook PC
  Product number: XJ437PA #ACJ

  Processor name: Intel (r) Core i3 CPU M 370 @ 2.40 GHz (2 400 MHz)

  I went through this forum and tried a few things:

  (1) to reinstall the codec IDT high definition

  (2) using the file available in the Recovery Manager

  (3) using the MicrosoftFixit

  But the problem is not yet solved.

  Can you please provide some suggestions?

  Thank you

  David

  Hi David,

  I would suggest you try a slight variation on the first two methods.
  
  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp47001-47500/sp47393.exe
  
  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.

  Right-click on the Audio display Intel entry and select uninstall - this time check the confirmation box to remove the driver and continue the uninstall.

  Then, right-click on the IDT device and select uninstall - for this entry, also check the box confirmation to remove the driver and uninstalling.

  Once completed, restart the laptop.

  When windows has reloaded, open your download folder, right click on IDT Installer and select "Run as Administrator" to launch the installation. Once done, restart the laptop.

  Any improvement?

  Best regards

  DP - K

• Beats Audio does not envy Touchsmart d039 23 after updates

  Nice day. I had problems with my wifi and bluetooth after than the 8.1 Windows update, but no problems with Beats Audio. After all the updates to automatically download for HP, it seems to have solved many problems, but now my new number is the Beats Audio does not work. After extensive research of the forums that I could find my Beats Audio Control Panel, however it does not engage and the its totally sucks now on my computer.

  Please help, is there a driver, the trick or the series of steps I can do to get this working?

  Thanks in advance

  M

  Hello

  Open Control Panel, Manager of devices.

  Expand sound, video and game controllers.

  Right click on IDT HD Audio

  Select uninstall. You may receive a prompt to remove drivers from your PC. Check this option.

  Restart your PC.

  Windows download and install bat if you have an Internet connection always on. Otherwise, open Windows updates and check the updated optional codec IDT.

  Download and install IDT.

  Jaco

  I'm not an employee of ch *.

  "" "" Please give a "Bravo, Thumbs Up" If the notice is relevant or "accept as Solution" to help other users of the forum having a similar problem.

• HP Pavilion dv4 1133tx, audio does not

  Hello friends, my name is nihang I just got a computer notebook hp Pavilion dv4 1133tx http://h10010.www1.hp.com/wwpc/in/en/ho/WF06b/321957-321957-3329744-64354-64354-3747826-3814427.html... I downgraded to xp service pak 3 I installed all the drivers, but audio does not work iv done much RND has TRIED to INSTALL MS UAA THEN IDT PILOT BUT IT KEEPS ON GIVING ERROR when I install the idt pilot he says '-output error» ': error-device object does not exist.

  There is 3 ms UAA on the net, I installed all then them tried to INSTALL IDT also it gives the error, and then I serched the forum, I got a response

  "XP 32 bit is difficult for drivers who work on these laptops_64bit is almost impossible."

  You do not Realtek Audio... and there is no driver XP for IDT Audio.Some have used the Vista driver successfully.

  Ms. UAA(required with a reboot before IDT):

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = PSG_I2...

  IDT High-Definition Audio:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = ob-624...

  I tried this too, and then also the same friends mistake plsss help what I do...

  I CANT SEE ANY AUDIO DEVICE IN MY DEVICE EAT MORE THERE ARE 6 EXLAMTION MARK YELLOW ONE BUT IT SAYS DOECENT WICH MATERIAL IS: s REALLY FED UP LOLLLLLLL

  MY USB, CHIPSET, TV TUNER, BLUETOOTH, WIRLESSLAN, LAN etc ALL ON MY DEVICE MANAGER, I CAN SEE his works well... .pls help thank you very much for reading

  by the grace of God, I got my answer my audio and modem works fine pls refer to this thread > > > http://h30434.www3.hp.com/psg/board/message?board.id=OS & thread.id = 230 thank you how tried to help me God bless u.this forum is awesome

• Beats Audio does not (HP Pavilion dv6-6c53er)

  Hello. earlier on my laptop (HP Pavilion dv6-6c53er) has been installed Windows 7 Home. But now I decided to upgrade my laptop. And changed the old Windows 7 Home for the new Pro Windows 8.1. All right. But after IDT HD Audio driver installation (with Beats Audio for my laptop model) - Beats audio does not work! I tried several ways to solve this problem. Similar sets different drivers on my device.

  Nothing helps. guys, I am desperate, please help me! Please, I beg you!

  Hello:

  Have you tried this driver?

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124012-1&cc=us&DLC=en&LC=en&OS=4158&product=6521374&sw_lang=

• my audio does not work please help

  my audio does not work please help. Thank you!

  Hi no thanks,

  1. What is the brand and model of your system and sound card?

  2. when the problem started?

  3. did you of recent changes to the computer?

  You can try to run the sound troubleshooter and see if it helps.

  No sound in Windows

  For more information, you can also consult the following article:

  Tips for solving common audio problems

  Hope this information is useful.

• HP envy sleekbook 4-1115dx: Audio does not

  PC audio does not work after update to 8.1 windows.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp60001-60500/sp60188.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63640.exe

  Once the relocation of Chipset is complete, stop the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight and then click the set as default (if the button is dimmed so it's set by default alreay) - check if you now audio.

  Kind regards

  DP - K

• My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.

  My dell optiplex 740 will not start.  The screen is black, once it displays the Dell logo.  It does not say that the computer is in mode 'sleep'.

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You receive an error message?

  Method 1

  See the articles below and check if it helps.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

  Method 2

  I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  How to start your computer by using last good known Windows XP Configuration

  http://support.Microsoft.com/kb/307852

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Method 3

  If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Why aac audio does not work in PowerProducer Windows Vista 32-bit?

  My friend has a Blu - Ray burner that is packed with PowerProducer 5. They have installed on their PC 32-bit of Windows Vista. Its HD files AAC audio camera mp4 video. The audio does not work in the environment creation of PP, or burned discs. I downloaded all the codecs. The audio works fine in WMP and QT, as well as in Windows Movie Maker. Installed the same software on my Windows 7 computer and audio works very well.

  I have contacted Cyberlink, makers of PowerProducer, and they said that the limited packaged version of the software does not support the AAC. They suggested that upgrade to the full version for $50. Obviously, I'm not quite confident in this response.
  Someone has an idea of what might be past or have suggestions of what to try to fix the error?

  Hi ClintWatson,

  Because the problem is specific to this particular application, I suggest you to contact CyberLink support for better support.
  http://Forum.CyberLink.com/Forum/forums/show/3.page