Receive the message error "wireless network connection is not a valid ip configuration.

Similar Questions

• "Wireless network connection is not a valid ip configuration" Windows 7

  I recently uninstalled McAfee antivirus on my aspire one NET accountant running Windows 7. Since then, I can't connect to the internet, I get a "wireless network connection has a valid ip configuration" of all other pc to connect to my router wireless without any problem.

  Any advice or help?

  Firstly, to check that the files are not corrupted, run the following analysis.

  Start > type CMD

  Right click on CMD and select run as administrator

  Type sfc/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  The scan will take a few moments

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833

  Once the process is complete, you may receive one of the following messages:

  • Windows resource protection did not find any breach of integrity.

    This means that you have not all missing or damaged system files.

  • Windows resource protection could not perform the requested operation.

    To resolve this issue, perform the analysis in safe mode System File Checker

    (http://windows.microsoft.com/en-in/windows/start-computer-safe-mode)

    and make sure that the files PendingDeletes and PendingRenames exist under %WinDir% \WinSxS\Temp.

  • Windows resource protection finds files corrupted and managed to fix it. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

    To display detailed information on the analysis of system files and restore, go to the display of the details of the System File Checker process.

  • Windows resource protection found corrupt files but was unable to fix some of them. Details are provided in convertible bonds. Newspaper %WinDir% \Logs\CBS\CBS.log.

    To repair the corrupted files manually, see the details of the System File Checker process to find the damaged file, and then manually replace the corrupted file with a good copy of the file.

  Second, have you tried to download the drivers and save them to your desktop?

  Close all window and/or applications

  Right-click on the file and select run as administrator

  Or, restart and start typing the F8 key

  Select Mode safe mode with networking

  Again, right-click on the drivers that you saved on the desktop and select run as administrator

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows/tips-fixing-common-driver-problems#tips-fixing-common-driver-problems=Windows-Vista

  Troubleshooter

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

• Wireless network connection is not a valid IP configuration / wifi problems

  I recently bought a laptop Asus G74 from Best Buy. It is currently running Windows 7 x 64 home premium. I am away from home on a job to work on a project for my company and during the two weeks have stayed at the same hotel with the same wireless, leaving home for thanksgiving between stays. The first week I spent the unsecured WiFi, download programs and games and play. I left the House, returned and used the wifi day, realized there is an ethernet cable in my computer bag laptop and connected to the hard line for the next day. I went to a colleague of room (a room down), went to look for the WiFi, and the trouble started.

  Diagnostics Windows network tells me that the wireless network connection is a valid IP configuration. I thought it would be something to do with the drivers, so I opened by Device Manager, went through each of my NICs 5 or more and look for the updates of drivers. A couple said they have successfully installed, but nothing has changed my ability to connect. Then I thought about rolling back the drivers, but since I've had the laptop for such a short time (less than 30 days) the option is grayed out. It wouldn't make sense since I could connect the previous week on the same wireless.

  From there, I decided to try a system restore to a point when I was getting into at first hotel. Restarting the laptop and the restore was successful. I tried to log in again and the same problem arises. I downloaded a couple of my favorite, Malwarebytes, and SUPERantispyware tools. Both have nothing.

  So I did some research and digging and scholar on ipconfig (flushdns / release / renew) with an elevated command prompt. I tried these and they told me my media is "disconnected" and cannot be released or renewed. I found this strange since I can see the wifi network. I tried to use the Fn + F2 to toggle the wifi and WIMAX (no idea which is incidentally) with simple ipconfig and media disconnected status does not change. I also read that disabling ipv6 might help, so I did this and still no dice. I restored system again for the 2nd point earlier and it still does not connect.

  Drop-down wifi icon in the bottom right of the screen, after trying to connect to the network unsecured wifi here (BWCamarilloInn), it reads 'Unidentified network' and under it "no internet access. I had different flavors of this message, including "limited access".

  I thought I'd try a cross-check to see if it was not on the end of the hotel. I pulled out my laptop backup enterprise and was able to immediately connect to the wifi, and my colleague from work related to his phone and his netbook. I saw another thread somewhere on a Windows forum that suggests a clean boot. Tried, has not changed anything either.

  Currently I have about 5 different adapters according to the Windows Network Diagnostics: the 1/2 LAN connection and Wireless Network Connection 1/2/3.
  I also have 5 in the drop-down list of the network adapters in the Device Manager.

  Intel Centrino WiMAX 6150
  Intel Centrino Wireless-N 6150
  Microsoft Virtual WiFi Miniport adapt
  Microsoft Virtual WiFi Miniport adapt #2
  Realtek PCIe GBE Family Controller

  and a separate drop-down list called adapters Intel Centrino WiMAX, with a menu drop down called function Intel® Centrino WiMAX 6150 driver.
  They are all updated when right click and check for driver updates.

  I also looked through the different adapters and checked to see if the ipv4 settings have been defined to automatically detect the IP of/etc.

  The laptop is great and I wouldn't really have to take it back to Best Buy. Other problems seem to be of culture that may be useful to know. Patch of League of Legends sometimes throws me an error "kernel patch pvp.net has stopped working", or just sits on the main projection before it hits the pitcher. Sometimes, it goes past the pitcher and he's here without connect to or start the main game. I heard that this has to do with the network stuff. I am computer literate, but I'm not terrible with networking or internet configuration stuff. If anyone can give me a hand, that would be much appreciated. I'll help you as much as I can. I've also attached the current ipconfig info (I'm connected to the internet via an ethernet to the wall cable, League of legends should therefore be able to launch).

  Thanks in advance.

  -Chris

  ipconfig Info

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>ipconfig

  Windows IP configuration

  Ethernet connection to the network space 2 card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Wireless Network Connection 3 Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : nomadix.com
  Link-local IPv6 Address...: fe80::d572:64 c 9: d97c:1f0a % 11
  IPv4 address...: 10.0.0.45
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 10.0.0.4.

  Tunnel adapter ISATAP.Nomadix.com:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. : nomadix.com

  Tunnel adapter isatap. {0B9C8743-1CDE-4BFF-9FDD-153D2D44F596}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Tunnel adapter isatap. {FD7B8B70-2937-4816-B45C-B73104366373}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  IPv6 address: 2001:0:4137:9e76:423:3796:f5ff:ffd2
  Link-local IPv6 Address...: fe80::423:3796:f5ff:ffd2 17%
  ... Default gateway. : ::

  Tunnel adapter isatap. {33A5C370-7EBC-4E95-A9AD-C7F3BF5D373E}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Tunnel adapter isatap. {501554B1-09E9-49B0-9078-04D0ADBD48A1}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  C:\Windows\System32 >

  Edit
  minor changes to the grammar/punctuation

  Hey, sorry for the slow response. Just got home a few days, and since then, I've been able to connect both the wifi just next door (I'm on the end furthest from the beach with her, but I can still connect) and on my netgear n wireless router. I can also access the router dashboard. Fail to starbucks so just wifi next door was the next best thing. ASUS finally answered after 11 days, saying I should reinstall the wireless driver, which I told them was one of the first things I did. Well. It seems that the hotel wifi and I have no idea why this is the case. I was able to connect to the wifi at the hotel the first week and not the second while they might have changed something. I have no idea. I'm just glad that it connects to other networks, both guaranteed and no guaranteed. I'm just a bit worried that it might happen again in the future but I always wear a hard line in the event of an emergency and a business laptop backup.

  With this new information, should I worry still try to fix anything with the hotel wifi, or do I just leave it as is? Thanks for the support continuous, 100 times better than ASUS right now: P

  -Chris

• "Wireless network connection" is not a valid IP configuration. "

  When I try to connect to the internet via a wireless connector I can but it takes anywhere from 10 to 20 minutes and many attempts that all generate the message title above.  but then it finally works.  It works great once its connected but the same connection problem happens the next time that I try to connect.  I don't know much about the technical problems for all responses must be in pretty easy to understand the jargon and thanks :)

  Hi Richard,

  Welcome to the Microsoft community.

  According to the description, resembles the internet connection is slow.

  What operating system you have installed in the computer?

  I suggest you click on the links and follow the instructions to resolve this problem:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please post back with more details so that we can help you better.

• Problem adding network printers; received this message error «Windows cannot connect to the printer or the name of the printer...» »

  Hello

  I have a Windows XP pro (Lenovo) that I recently ran the recovery and returned to certain configurations of 1.5 years. Now I can't add a network printer and get always the message error «Windows cannot connect to the printer or the name of the printer...» ». I ping the printer and all on my network can add these printers, it's just that a machine that fails to add network printers.

  I disabled the firewall, but were still unable to add the printer. Then I found some difficulties to register for a similar problem, but they were not useful... It really becomes a big headache, especially Windows restore does not work...

  I strongly suspect that 1.5 years, someone has renamed the printer.  Use Windows Explorer to navigate to the print server through My Network Places and see what it's callednow .  Otherwise, you could ask your network/system administrator.  You should know... Please vote if this has been helpful!  Please, click on Brand or propose as answer if that answered your question!

• Basic OS Wndows Vista on DVD - R 16 X, received the 0x4ff02 error code. Therefore, can not save OS.

  Original title: * e-mail address is removed from the privacy *.

  To try to save, basic OS Wndows Vista on DVD - R 16 X, received the 0x4ff02 error code. Therefore, can not save OS.

  Hi Brad blair,.

  ·         What is the full error message?

  ·         You did changes to the computer before the show?

  Please check the error code that you provided as it seems to be incorrect.

  Follow the suggestions below for a possible solution:

  Method 1: You can try to perform the backup on a different DVD and check if it works.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  You can also see the following article for more information on the backup:

  Back up and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Let us know the results.

• Trying to create a bootable USB I get message error "ISO image selected is NOT a valid ISO file.

  Questions of ISO image

  I'll try to find a way to install Win 7 64 bit Pro - on multiple (without a DVD player) netbooks and thought I had found the solution using DigitalRiver to upload a picture ISO of the OS - then (using the MS Windows 7 DVD/USB tool) - create a BOOTABLE usb key?

  However, yesterday I downloaded the image ISO (http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65805/X15-65805.iso)

  (which, according to the website of souce was supposed to be 3 GB in size - but was 2 GB in size (WHY?)

  And on the use of the tool USB - a got a message error "ISO image selected is NOT a valid ISO file"

  -What this means and what I can do to work around this problem?

  And, I think - that this procedure works with a "corporate license"?

  Tried - same result - the file is obviously corrupt
  I ended up using a previous download that works!

• Wireless network connection does not

  I can't access a wireless connection with my computer wireless network connection. The icon in the bottom right of the screen shows a red X and says 'not connected wireless network connection. The wireless on my keyboard button does not illuminate

  I tried to change the channel on the new ADSL2 wireless router and refreshed looking for wireless connections, but still not found connections. I have not used a wireless router before and never used a wireless connection with this computer so I don't know if the wireless card works or not, if the properties of the wireless adapter indicate that it works. Is there a way to check if the computer's wireless card is running or connected and if not, how can it be connected? Thank you

  I finally understood by trial and error, why I was unable to connect wireless to a modem, that you sent me. In my control panel, I found that the properties of HP Wireless Assistant had "Hide status icon" checked, so I checked it and the icon came in the bottom right of my screen. I left then clicked that icon and it showed the wireless and bluetooth was OFF so I went in and it now works.

  Why HP support could not help me in what I don't know, I just got the race!

  Hope this helps others with similar problems.

• the network bridge is not a valid ip configuration

  the network bridge is not a valid ip address configuration, how can I solve this problem? Help, please! Thank you

  Hi Chris,

  1. how many computers is connected to the network?

  2. how the computers are connected (wired or wireless)?

  3. do you get this error message on all of the computers on the network?

  4. have you tried to reinstall or update the network drivers?

  You can try and run the network troubleshooter utility,

  Open utility troubleshooting of networks:

  http://Windows.Microsoft.com/en-in/Windows7/open-networking-troubleshooters

  Reference:

  Create a network bridge:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-network-bridge

• Area of connection is not a valid IP configuration

  Original title: 'Investigate the problems of router or broadband modem' diagnostic response but there's nothing wrong with the modem or the router.

  I get a diagnostic response "Investigate router or broadband modem problems", but there is nothing wrong with the modem or the router.  I know because it has been tried on three different networks, different routers and it does on the LAN and Wifi network connections.  After going through it if I get a new error: "connection to the local network is not a valid IP Configuration".  What is going on?

  C:\Users\Himrichs>ipconfig/all
  Windows IP configuration
  Name of the host...: Himrichs-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: officemax.com
  Wireless network connection Wireless LAN adapter:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Intel Centrino Advanced-N 6205
  Physical address.... : 08-11-96-B1-38-F0
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Ethernet connection to the Local network card:
  The connection-specific DNS suffix. : officemax.com
  ... Description: Broadcom NetLink (TM) gigabit Ethernet
  Physical address.... : B8-70-F4-FF-85-E0
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::6dce:774:ef85:e7a9% 11 (Preferred)
  IPv4 address: 192.168.1.17 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Thursday, January 19, 2012 17:15:18
  End of the lease...: Friday, January 20, 2012 17:15:18
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 236745992
  DHCPv6 DUID customer...: 00-01-00-01-16-41-EC-97-B8-70-F4-FF-85-E0
  DNS servers...: 208.67.222.222
  208.67.220.220
  2.2.2.1
  NetBIOS over TCP/IP...: enabled
  Card tunnel Teredo Tunneling Pseudo-Interface:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Tunnel adapter ISATAP.OfficeMax.com:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : officemax.com
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  I discovered that the problem had something to do with a forgotten remnant of NetBEUI still flying over in windows 7 that prevented the DNS to resolve an IP address and connect to the DHCP server (or something like that).  The problem was not repairable (or at least not easily fixable) and told me to reinstall windows or recover the computer to factory conditions that I did it and now it works again.  What the tech told me that he saw this time before and could not get a straight answer to a working solution and then either.

• Can't install downloaded software, receive the message error "Windows cannot access the specified device, file, or the path"

  Cannot install any software downloaded - says "Windows cannot access the specified device, path or file.  You can not have the appropriate permissions to access the item.  This happened after I went on a bad site and downloaded something accidentally and I was not able to do anything after that.  I have avast and avast kept popping up saying I've made to a site with malware and that it would interrupt - well these pop - ups have ceased and I was scanning my computer using windows defender (which did not find anything) - but I still have problems on my computer. Should what steps I take?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Toshiba Stor.E TV + Wireless Network Connection does not work

  I can't transfer files from my desktop PC to the Stor.E via the wireless network. I use a USB WiFi dongle with a Toshiba label thereon, such as provided by Amazon when I bought the Stor.E and I had a lot of trouble so he could connect despite the strength of the signal being 7 of 10 bars.

  I now get linked and read directories right on the PC but when I try to transfer a file transfer 1% (he said) of the file and then hangs until, presumably, it expires a few minutes later and told me then the USB WiFi dongle has failed. However, according to the network set up it is still connected.

  I tried to access the interface of Samba using 192.168.1.9 port number, which is that of the Stor.E, and by using a browser on the PC and all I get is a page that shows a simple example of HTML + CGI - that is the Samba interface?

  Anyone has any suggestions or do I return to the transfer of files via a USB.

  Hello

  Think that a thread describes a problem which could be similar:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65340

  Lasko has posted a link for the update of the firmware maybe you need to update the firmware and should test again

  There is also an update of the firmware on the European driver Toshiba page
  [Stor.E TV + firmware udapte | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 4 & selFamily = 271 & selSeries = 254 & selProduct = 6350 salt ShortMod = null & language = 13 & selOS = all & selType = all & ye arupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 80742 & DISO =-1 & driverLanguage = 42]

• Receiving the message 'Firefox close unexpectedly', but can not reopen.

  Get the message "Firefox completely unexpected". I click on "reopening", but it does not reopen. Get the same message every time. Tried to delete and redownloading, but the same thing. I have a Mac. I used Firefox when he leaves suddenly. Now it just does not open again. Any help much appreciated.

  BP-5cad3873-6F16-464b-BE83-222072141115

  Signature librooksbas.dylib

  What we call; do you use report
  http://forums.techguy.org/Apple-Mac/1108797-Safari-problem.html

  I looked around, and many are having this problem.
  http://www.bing.com/search?q=librooksbas.dylib

  If you have one, turn it off.

• Recently started to receive the message "this copy of Windows is not genuine".

  Original title: problem computer.

  Recently, my computer began displaying the message "Windows7 Build 7601, this copy of Windows is not genuine" at the bottom right of the screen.  I know that it is valid, then what is the problem and how to fix it?

  Repair and recovery Forum left Windows 7.

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------
  Have you installed a new hardware or software since you started facing this problem?

  Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.

  What Antivirus utility you installed?

  What's your date and time correct?

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• A Wi - Fi connection is not a valid IP configuration

  I have an old 700T1C of 6 months of Samsung tablet running windows 8.  Until a week ago I had WiFi connectivity problems at work (I was never able to get it to connect to my WiFi working) but never at home.

  When you are connected to a public WiFi, windows performed an update.  I lost the public connection immediately and wasn't able to recover.  Since then, I have not be able to get connectivity at home either.  I took the computer to the store I bought if go and because they could get connectivity with their WiFi they said they couldn't help.

  At home here, we have a number of devices (Apple and Windows 7) who have no problem connecting through our Belkin N Wireless Router.  If there is a compatibility issue why it just happened?  If it's too many devices, even once why it just happened?

  I tried netsh winsock reset catalog and netsh int ip reset reset.log hit

  Here is my ipconfig/all information.  I appreciate your help.

  Microsoft Windows [Version 6.2.9200]

  (c) Microsoft Corporation, 2012. All rights reserved.

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: sues_tablet

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  Local Area Connection wireless LAN adapter * 13:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Hosted network virtual card

  Physical address.... : CA-F7-33-52-5E-FF

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 12:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Wi - Fi Direct virtual card

  Physical address.... : C8-F7-33-52-5E-FF

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Device Bluetooth (personal area network)

  Physical address.... : C8-F7-33-52-5F-02

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wi - Fi wireless LAN adapter:

  The connection-specific DNS suffix. :

  ... Description: Intel Centrino Advanced-N 6235

  Physical address.... : C8-F7-33-52-5E-FE

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::99c5:9633:13d1:5369% 12 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.83.105 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 264537352

  DHCPv6 DUID customer...: 00-01-00-01-18-A0-DB-AB-00-50-B6-52-11-A1

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Teredo Tunneling Pseudo-Interface

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {9BB9871F-EEF6-4C27-BEFF-968EBD3E2C33}:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Adapter Microsoft ISATAP #4

  Physical address.... : 00-00-00-00-00-00-00-E0

  DHCP active...: No.

  Autoconfiguration enabled...: Yes

  C:\Windows\System32 >

  Hello

  Thanks for posting your question in the Microsoft Community.

  The problem may be caused, if there is a miss match the IP address configuration.

  Follow the steps:

   

  Method 1:

  Release and renew the IP address of your computer:

  a. start the desktop view.

  b. open the command prompt, right-click in the left corner when the window appears, and select prompt (admin).

  c. type ipconfig/flushdns and press on Enter.

  d. type ipconfig enough and press on Enter.

  e. then type ipconfig / renew and press on Enter.

  f. type Exit and press on Enter.

  Method 2:

  Follow the steps to manually assign the IP address:

  a. open network connections by pressing Windows + Q on the keyboard keys and type Control Panel, and then click Control Panel. In the search box, type adapterand then, under center network and sharing, click view network connections.

  b. right click on the connection you want to modify and then click Properties.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click the Networking tab. Under this connection uses the following items, click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties.

  d. to specify IPv4 IP address settings, do one of the following:

  ·         To specify an IP address, click use the following IP addressand to IP address, subnet mask, and default gateway boxes, type the IP address settings.

  e. to specify IPv6 IP address settings, do one of the following:

  ·         To specify an IP address, click use the following IPv6 address, and in IPv6 address, subnet prefix length, and default gateway boxes, type the IP address settings.

  f. to specify DNS server address settings, do one of the following:

  ·         To specify a DNS server address, click use the following DNS server address, and then, in the boxes DNS server preferred and auxiliary DNS server , type the addresses of the primary and secondary DNS servers.

  g. to change advanced DNS, WINS, and IP settings, click Advanced.

  Method 3:

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save you time and effort.

  Run the troubleshooter from network from the link:

  Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.