Wireless network connection problem

Similar Questions

• Wireless network connection problems

  I have problems to stay connected to my wireless router.  There are 3 laptops and 2 workstations connected, but my laptop does not seem to disconnect every time my computer sleeps or is closed.  I have to go through this process to solve the problem in which the connection is immediately restored, but then disconnected and connected once again. I tried to remove the connection & restores and troubleshooting with the router, but nothing seems to solve the problem. Other computers never have this problem.  My laptop is fairly new, and I'm quite puzzled as to why he's in trouble.

  Hello

  To provide the proper resolution, I would need more information on your side.

  What is the number and the model of the laptop?

  Windows can be disable your network adapter to save power. You can try to disable the power saving option in the network adapter properties

  I suggest you try the steps to disable power saving option. Check if it helps.

  a. open network connections by clicking the Start button, and then clicking Control Panel.

  (b) in the Search box, type adapterand then, under network and sharing Center, click on view network connections.

  c. right-click on the connection and then click Properties. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. click the Networking taband then click on configures.

  e. click on the power management , clear the checkbox allow the computer to turn off this device to save power tab and then click on OK.

  See the article for more information.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Home wireless network connection problems

  What should I do if I normally connect to the wireless network does not appear?  It is not a network card problem, because I can connect to other wireless and school and other places.  I tried to reset the router, ping and by unplugging and seeing what I could understand on the computer at home, but nothing does.  Any ideas or suggestions would be greatly appreciated.

  Thank you.

  Hello

  Have you tried other computers to connect to your router? You use both wire and wireless
  connection?

  Unplug the modem and Router 3 + minutes. And then reconnect the modem - when it is running
  Plug in the router - when it is running - restart the computer. This is known as a hard reset.

  Check with your router manufacturer support.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

• pro place 8 wireless network connection problems

  I have problems connecting my venue 8 pro to a wireless network. anyone encountered similar to debug and fix issues/options?

  When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

• Pavilion dv4 2123 TX: TX HP Pavilion dv4 2123 wireless network connection problems

  Machine will connect to the wireless network, but not connect to internet.

  Have restarted, hard-rebooted and uninstalled/reinstalled all the drivers for network card.

  Any help is welcome!  Thanks in advance.

  Thanks for your suggestion

  I tried link below

  HP PC - troubleshooting your wireless network and Internet access (Windows 7)

  But it does not work.

  It seems to be driver files are corrupted on my machine.

  Came to know that by running the command cmd below.

  sfc/scannow

  He metnioned that some files are not repaired. Please find the journal in the CBS.log file.

  Not sure if the driver network adaptor also get corrupted.

  Please suggest.

• HP Pavilion dv4 2141nr wireless network connection problems

  Machine will connect to the wireless network, but not connect to internet.

  Have restarted, hard-rebooted and uninstalled/reinstalled all the drivers for network card.

  Any help is welcome!  Thanks in advance.

  Hello:

  See settle an updated wireless driver works for you...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card

  connection network card

  my pc will not connect to wireless internet... It is said there could be a problem with the driver for the wireless network connection card... I'm not sure how to solve the problem of the dat

  Hello

  Did you change your computer?

  I suggest you to follow the links and check out them.

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• "Wireless network connection" is not a valid IP configuration. "

  When I try to connect to the internet via a wireless connector I can but it takes anywhere from 10 to 20 minutes and many attempts that all generate the message title above.  but then it finally works.  It works great once its connected but the same connection problem happens the next time that I try to connect.  I don't know much about the technical problems for all responses must be in pretty easy to understand the jargon and thanks :)

  Hi Richard,

  Welcome to the Microsoft community.

  According to the description, resembles the internet connection is slow.

  What operating system you have installed in the computer?

  I suggest you click on the links and follow the instructions to resolve this problem:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please post back with more details so that we can help you better.

• Said connections wireless network connection are available, but the networks to connect to are no longer visible in the connection

  I got a new laptop from work and have connected a couple of times on our network.  Now, he does not connect through the wireless network connection.  He said that the connections are available, but there is no connection available more in the list.  If you have to manage wireless networks, it is in the list... but you can not log in via this page.  Any help would be grateful.

  Thank you!

  Hello

  1. what operating system you are using?

  2. how many computers is connected to the network?

  3 - is a domain network?

  4. What is the exact error code or error message you received?

  5 have have there been recent changes made on the computer before the show?

  Follow the steps mentioned below and check if that helps.

  Method 1: Troubleshooting run Network.

   

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you cannot connect to a network, it could be a problem with your network adapter. You can try to use the network adapter troubleshooting utility to automatically find and fix some common problems.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 3: Disable the security software and check.

   

  You can also temporarily disable the security software and check if the problem persists. Be sure to enable this security software on the computer after checking.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  For more information, please see the following links:

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope that helps!

• Network connection problems, forcing APIPA to be always active

  Original title: APIPA
  According to the manual of microsoft
  IPAutoconfigEnabled = 0
  is defined in each group of interface parameters in the registry
  but ipconfig/all says:
  Automatic configuration: Yes
  and tcpip sometimes gets the 169.254.x.x address
  The DHCP service stops
  Network driver has been reset, reinstalled, updated...
  Automatic configuration (APIPA) is still on
  How to solve this problem?
  (Vista x 64)

  Hello

  
  1. is this a wired or wireless?
  2. don't you make changes on the computer before the show?
  3. What is the accurate and complete error message that appears on the computer?
  
  Method 1:
  You can perform network troubleshooting steps from the link:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
  Also, try the steps from the link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  
  Method 2:
  You can also reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
  
  Method 3:
  You can try to release and renew the address IP address and check if that helps. To release and renew your IP address follow these steps:
  a. open windows command prompt
  b. click Start - run type cmd and press enter
  c. to release your ip address ipconfig/release , press Enter
  d. to renew your ipconfig/renew IP address
  
  Method 4:
  You can also consult the knowledge base article and check if it helps:
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• The 'Wireless Network Connection 3' network card is not properly configured to use the IP protocol

  I can't connect to any internet. I'm trying to connect to wireless hotspots, but it tells me that I am connected with limited access

  Hi idkmyname

   

  1. What is the exact error message displayed when you try to go online?
  2. do you have updated the network card drivers installed?
  3. What is the brand and model of the computer?

   

  Method 1:
  You can check the links below and check out them if the steps to help you resolve the issue-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  You can also check the help links below-
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks
  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Method 2:
  You can follow the steps below to check the NIC in Device Manager. I suggest you to uninstall and reinstall the NIC drivers and check:

  a. click Startand then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  Check if you have any exclamation point beside the devices listed. If you have, then there is problem with the card is installed.

  c. in the NIC, expand adapter, right click on the devices listed and then click Uninstall.
  When you are prompted to confirm that you want to remove the device, click OK.

  d. restart the computer.

  After the computer restarts, the drivers will be installed automatically. Check after this procedure if you are able to get access to the network.

   

  If you get all the drivers related errors, you can check if you have the latest drivers updated, installed for the network card. See the help link - below
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
  I hope this helps.

• Wireless network connection error

  I went recently suppliers for my internet but for the habit of my computer allows me to connect to the network now. I have troubleshooted the problem a million times and he told me always that 'problems found', is that windows is unable to connect to the hidden network, it's not because I'm out of reach, so he says the other reason could be that the settings on my computer do not match the settings of the network, and it doesn't tell me something on how to check the network settings on my computer or what What on earth it all means even! I was connect my computer with a cable ethernet because of this problem, but it's extremely embarrassing... Can someone please tell me how I'm supposed to go on "change settings of the network on my computer" to match the settings of the network. ?

  Hello

  I understand how it feels when you try to connect to a wireless network and it gives you an error. I would like to know more information on the issue, so that we can help you better.

  1. What is the exact error you get when you try to connect to the wireless network?

  2 have you installed third party software on your computer?

  Let us try the following and see if it helps.

  Method 1:

  Temporarily disable Windows Firewall and check.

  Enable or disable the Windows Firewall:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  WARNING: Disable Antivirus\Firewall temporarily, then check the issue. Sometimes they may be in conflict. Please make sure that you enable the antivirus software\firewall after the test to keep your computer protected.

  Method 2:

  Try the steps in the following Microsoft support article.

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please reply with the status of the issue, so that we can better help you.

• Network connectivity problem, it must be disconnected at random

  Original title: connectivity problem

  connectivity problem: under troubleshooting is said: problem with nearby connections... the computer disconnects Internet after 45-60 minutes - it closes down also, usually when I repair as administrator, I can connect to internet, but still a time when left almost an hour without using the internet disconnects?

  Hi Kvhan,

  1. are you using cable or wireless network?

  2 have you made changes on the computer before this problem?

  This problem can occur because of network settings, try the following methods and check if it helps.

  Method 1:

  Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. Click Start, type ncpa.cpl, and then press ENTER.

  b. right click on your wireless network connection, then click Properties.

  c. click the wireless networks tab.

  d. under preferred networks, click your wireless network, and then click Properties.

  e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Reference:

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

• Wireless network connection has an invalid IP configuration

  Computer is Toshiba C855D.  Windows 7 Home Premium 64-bit.

  Wireless adapter is Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC

  I have been using the same public wireless for months.  Now, I try to open it and I can't get full connection, only a limited connectivity.  When troubleshooting, the program tells me that the "Wireless Network Connection" has an invalid IP configuration.

  I'm the only computer in the whole of the network that has this problem.  All other users around me have no problems connecting to the internet on the network.

  Would appreciate any help.

  Hi Thomas.89,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue with the network has a wireless connection is not a valid IP configuration.

  Method 1
  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Run network troubleshooting utilities.

  Network convenience stores
  http://Windows.Microsoft.com/en-in/Windows7/open-networking-troubleshooters

  Method 2
  Try the steps to reset TCP/IP use the manual method to reset TCP/IP

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  I also suggest you to see link and check.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/is-is/Windows7/fix-network-adapter-problems

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• NO wireless network connection - message "Windows could not find a certificate to connect to the network Shaida. How to fix this problem?

  I had just restored my Thinkpad T60 the default setting. Reformatted and reinstalled Windows XP, but I am unable to connect to the wireless network connection - message "Windows could not find a certificate to connect to the network Shaida.

  Shaida is my wireless modem.

  How to fix this problem?

  Before the resumption of connection Internet worked normally.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.