Dell Latitude E5500 screen dark

Similar Questions

• Dell Latitude E5500-problems with the IDT audio driver

  Hi all!

  I use Windows Vista 32bits on E5500 and everything works fine with the big exception of the audio driver. I used the latest version for this laptop which is A15, no other versions are available on the downloads page. The pilot is very unstable and crashes all the time. Pressing the sound keys does not change the audio levels instantly as expected. There is a noticeable delay in the volume control after I pressed the button. A few 4-5 or more seconds after I press Volume upwards or downwards until the press is registered. A very weird situation and nothing helped so I deleted the audio driver of Dell. I use the default Windows driver now and so far everything is ok.

  Everyone has experienced a weird behavior like this on the same computer laptop? Do you know where I can find an old audio driver for E5500 so I can test again?

  As the system software Dell-is important on the audio system or not so. I installed it after a recommendation in the audio FAQ here on the forum. Thanks for all the tips!

  Pandorum

  old audio driver for E5500

  Very good selection here

  http://downloads.Dell.com/published/pages/latitude-E5500.html

  All most recent drivers dated IDT must be removed from the hard disk or at least the drivers folder before installing an old date one.

  Pandorum

  As the system software Dell-is important on the audio system or not so.

  With the Intel chipset driver, was important for XP, not important for 7, but not sure about Vista.

• Dell Latitude: Scan with Windows 10

  I have a HP Deskjet 3520.  in a moment of pure, pure madness, I've upgraded to Windows 10.  Now my printer won't scan to my computer in pdf format.

  If I try to scan to PDF it is right there with a message "connecting to a computer" which remains for about 5 minutes, then he told me "the computer does not respond.  Check that the USB cable is attached or wireless works correctly and try again."  Yep, check it out and try to print of tp.  Yes, so the computer is obvioisly talk to the printer, try scanning in format PDF - not just the same message.

  Previously, he fortunately scanned word copy paper in pdf documents but not now.  My computer is a Dell Latitude E5500, already served by Windows 7.  Now I don't know even how to find out what is my basic computer.  I don't know that Windows (Microsoft I guess) kept sending messages that my upgrade was ready and that if I install all my data and stuff would be ok.  Well, it's not ok.  I don't want to do something harmful - I just want to be able to scan documents to PDF, so I can send by e-mail.

  Hello

  Thank you for using the forum.

  You have installed the FULL features software for your printer?

  If you haven't, here is the link for the download.

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3520-e-all-in-one-printer-series/5162504/model/5162505#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the printer, you should be able to use the software of the printer to scan.

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• Problem connecting to the screen of ipconfig/all in Windows XP on a laptop of Dell Latitude D620 - physical address of the laptop need

  On Windows XP, I am trying to find the physical address for my Dell Latitude D620, then I can use it to connect to the wireless router.  When I go to start > run > ipconfig/all, a small screen flashes for a second or two, then disappears.  You'd be able to get my physical address from the laptop to the ipconfig/all command screen?  What is the problem and how can I fix?  If not, is there another way to discover the physical address of my computer?

  Hi Wendy12,

  You can do the same thing from the command prompt.

  a. Click Start click all programs.

  b. click on accessories, then Command Prompt.

  c. type the command, and then press ENTER.

  Check to see if this article helps you.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

• Dell Latitude E6400 LCD / LED video screen has partial display of vertical lines

  Hello

  I have a Dell Latitude E6400 on which display LED screen / video shows the stable vertical lines in the right half of the screen (partial view on the left side is good, see photo). I have already tested the external VGA port - it is displayed correctly on an external LCD display. The vertical lines are constant and the same brightness, regardless of the position of the lid of the laptop. This could be a problem with the inverter or the water of the LED screen? Or something else? Thanks in advance for any comments.

  P. S. Please note that glow Golden on the top left of the screen is just a reflection of ambient light.

  

  It is not the inverter (assuming that the display has a);  who simply controls the backlight.  It may or may not be the cable - it's not likely.  It resembles a billboard damaged.

• I hope to find a solution to the problem of the video screen FOR the dell latitude 10 Tablet

  Hello

  I have the dell latitude 10 Tablet

  I have a problem in the video display device and especially if the video is HD with precision
  Video is very slow and "forced" terribly... I'm surprised this problem.
  Formate worked for the device is not not to solve the problem... Experience the same video on the w510 Acer Tablet and it works fine
  Fact the imbalance of the is the problem of my camera... or what specific problem... Help, please

  Hi ALI IBRAHEM,.

  If I understand you correctly, HD video playback problem has been resolved by installing the driver Pack for the user installing Intel.

  To control the imaging (Webcam) of Windows 8 machine does not need to install the camera application. Windows 8 operating system has 'Camera' app. You can access the application 'Camera' of the start screen. In case you are not able to see the application of the 'Camera' on the start screen, you can download it "Windows Store Apps".

  • In the start screen, click the tile 'Camera' to open the application
  • If the app invite you to use your camera and microphone, choose "allow".
  • Adjust the settings, if desired
  • To take a picture, click anywhere on the screen
  • The camera app saves all your loving photos and videos in a folder called "Camera Roll" in your photo library.

  Answer please if you have any other questions. I'd be happy to help you.

• Screen turns black during the installation of Windows 8 on Dell Latitude E6400

  Hello

  I have a Dell Latitude E6400

  The specifications are:

  Intel Centrino 2

  4 GB OF DDR2 RAM

  HARD DRIVE 160 GB

  Core 2 Duo 2.53 GHz

  NVIDIA Quadro NVS 160M 256 MB DDR2

  I'm doing a clean install of Windows 8 pro 64 bit. The problem is that when I get to the stage where the installation application to connect to a wifi, all of a sudden, the screen goes black and then nothing happens. Sometimes I am able to move on to the next step where the installation process asks if I would like to use express settings or customize it. The same thing happens on this stage too. I could not go any further than this step.

  I tried dozens of times, even tried 2 different iso files and event tried a 32-bit Windows 8.

  Same thing happens evrytime, black screen and then nothing. I wasn't able to find that everything related to the internet.

  One last thing, if it's a problem of display driver, I can't set either because I already formatted my HARD drive.

  Can someone help me please:(c'est vraiment frustrant.)

  Thank you

  Hi shayanjalil,

  Dell Latitude E6400 has not been tested by Dell for Windows 8. You won't find drivers of Windows 8 for this system.

• Latitude E5500 Intel GMA pixels problem after upgrade of RAM > 4 GB

  Hello, I use latitude e5500 with the following specifications:

  • Processor: intel core 2 duo
  • graphic: Intel GMA 4500 MHD
  • OS: Windows 7 SP1 64-bit
  • RAM: 6 GB (2 + 4) 800 MHz

  Recently I have upgraded RAM of 4 GB (2 + 2) 6 GB (2 + 4). They are of the same manufacturer, the two 800 MHz I checked the new memory with the Dell diagnostics - it's ok. After upgrade, I have a serious graphics - parts of my get pixelated screen problems. It is irregularly, with different applications ran - see the screenshot.

  I tried to uninstall the graphics driver - it's ok, but I'm not ;) mode 640 x 480 I have tried different drivers - no improvement. Also, I removed a 2 GB - it works very well with my new 4GBs

  

  Hello

  Yes, I solved the problem. I had to buy an another 4 GB from the same manufacturer with the same properties. With 4 GB + 4 GB, it works perfectly.

  Concerning

  Aleksander

• Primary hard drive 0 not found Dell Latitude

  Hello

  I just bought 2 notebooks of Dell Latitude D800 with no operating system. The first laptop is fine, but the second, when I turn it on it shows the Dell screen with the loading bar. The loading bar is to halfway to the end when it freezes. The system freezes on this screen for about a minute, then it beeps twice and a black screen that says:

  "First hard drive 0 not found '.

  No bootable devices - don't strike F1 to retry boot, F2 for Setup utility.

  So I go into the BIOS and see under "internal hard drive" and he says: 'no '. I checked and make sure the hard disk has been activated, and it is.

  I took the hard drive and reinstalled it. Nothing. The drive is a Toshiba 40 GB. In addition, mention, the reader makes a weird noise (not the click of death) and the hard drive on the laptop stays on all the time.

  Other D800 I mentioned boots very quickly and displays a no. OS screen, which is very good.

  So is my dead HDD?

  Thank you

  It is quite clear that the BIOS does not recognize the hard drive.  I suspect that the IDE controller on the motherboard has failed.

  Given that you have two cell phones similar to fool around with, probably the fastest way to isolate the problem is to swap hard drives.  Call the laptop that does not have one and one that works B

  If the laptop has now boots and cell B now is not, you know that the player who has been to A is bad.

  If A laptop computer still does not start and portable B boots again, then you know that the two disks are OK and the problem is the motherboard or the connector of the drive in the laptop.

• Desktop on a Dell Latitude D510 problems

  Hi people out there. I'm on a Dell Latitude D510. Since 2 days back, I can hardly read what is on my screen and have resorted to connect a desktop monitor. I can make very very weakly, what is on my Dell screen, but the resolution is so bad I'm stuck. I followed all the stuff on the screen / control panel nothing happens. Help, please

  Hello

  • What were the changes made before the problem occurred?
  You can view these methods:
  Method 1:
  I suggest to try to change the resolution of the screen and check.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true
  Method 2:
  If above does not work, I suggest trying to update the graphics card and check.
  http://support.Microsoft.com/kb/283658
  Method 3:
  If above does not help, I suggest you try uninstall and then reinstall the Graphic card and check.
  http://support.Microsoft.com/kb/310126

• By mistake I disabled all user accounts and cannot connect to my dell latitude d610 laptop computer. Tried going into the bios and turning off everything, what does not work!

  By mistake I disabled all my user accounts and cannot connect to my laptop, the Dell Latitude d610. I tried to restart in all modes as well as rotating directors passwords and disable in the bios. Nothing works!

  Hi kathleenvickers,

  1. How you have disabled all the user accounts on the computer?
  2. What do you find in the login screen when you restart the computer?

  See the articles below and check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126

• Boot Dell Latitude problem

  Turns on when I start my laptop (a Dell Latitude D610) he displays that page load with the Dell icon, but it just goes to a page is black with the _ blinking in the top left corner and not keys working that they just beep noises and F8 will not start in safe mode (I sat to watch as the screen black for more than an hour and happened past)...
  Someone knows what to do thanks in advance.

  Hi Taylorg,
   
  If your computer beeps short one or two before starting, this is normal and your computer tells you the BIOS startup succeeded. If your computer beeps and does not start, a more serious hardware problem probably occurs.
  A beep code means generally that a basic function was not able to start. A basic function could be reading memory, video display or be able to send information on a hard drive.

  The most common problems that cause the beep codes are memory and heat-related failures caused by an accumulation of dust in the critical areas of cooling.

  Check these conditions on your laptop and see if that helps fix the problem.

• Laptop Dell Latitude D600 icons/fonts too small

  I tried to change the resolution of the screen but when I make it smaller I get a black boarder round the screen, and everything else small and if I make more great, while still small, but I have to scroll the screen to see certain parts.

  I'm on a Dell Latitude D600 laptop and my video driver ATI Mobility Radeon 9000 version 6.14.0010.6587 is.  I am running Windows XP Proffesional.

  Please let me know what I can do.

  Thank you

  Johnny

  * original title - everything on my screen is small! I don't know how to fix it please help.*

  Hi Johnny,.

  Looks like you may have to try to adjust the DPI settings on your computer. Here are the instructions on how to do it:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_use_large_or_small_fonts.mspx?mfr=true
  I hope this helps.

• Paint & Print Scrn compatibility-Vista Ultimate & Dell Latitude E6500

  Greetings,

  New laptop and new operating system so wholly unknown to the waters here.
  On my recently deceased but beloved Toshiba Satellite, I used to click on 'Print screen', right click and paste in Paint. The print screen (Alt + Print Scrn on this computer Dell Latitude E6500) not to paste the image into Paint.
  Any ideas as to how this can be resolved? Is it a matter of 'Dell '?

  Thank you

  Non-techie, check if you need to press the fn (function) on your laptop before you press PRTSCN, you can tell if they are both the same color blue.

  When you press ALT + PRTSCN, you capture only the window, when you click Print screen capture you the entire screen. Then, you press CTRL + V on your keyboard to paste. Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with Dell Latitude 2100 (with windows vista) is a driver (file: \windows\system32\drivers\msahci.sys) catch 22, it's that it doesn't have an internal cd-rom

  I have a dell latitude 2100 and when it is consumed first upward it goes to a screen of security and said that is wrong and it is said that the status of this file is 0xc000000f how I could fix this without an installation disk because it does not a cd-rom

  Hi Rick,

  Thanks for posting your query in Microsoft Community!

  The description of your problem, you are facing problems with your Dell Latitude 2100 and receiving tell them an error message which is bad and he said that the status of this file is 0xc000000f. In order to quickly provide a solution, please answer these questions:

  1. What is the exact error message with error code?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you check the drive for errors, and then check if it solves the problem.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

   

  Important: While running chkdsk on the drive, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Note: It may prompt you to insert the Windows installation disc. However, you can use the external DVD player and check.

  Hope this information helps. Answer please if you have any additional questions about the problem you are having and we will be happy to help you further.