Paint & Print Scrn compatibility-Vista Ultimate & Dell Latitude E6500

Similar Questions

• What Vista for Dell Latitude D 630?

  Halo!

  Is anyone know with what Windows Vista the Dell Latitude D630 out cams?

  I bought this laptop, on the top is a sticker of Windows Vista, but do not have a COA sticker

  on the underside.

  Can someone help me?

  Thanks, have a nice day!

  Szlobizoli

  Hi Phil!

  I have a problem that isn't really for this forum, but I ask you here.

  I installed a Kingston 120 GB SSD in my Dell Latitude D630, as well as the

  Laptop computer becomes faster. Now, I installed HD Sentinel and there is

  shown: performance: 80% health: 100%. It's a whole new SSD. And there is a text:

  The solid-state drive status is PERFECT. Problematic or weak sectors have not been found.
  The TRIM of the SSD feature is supported but disabled. It is recommended to upgrade the operating system, the drive controller or its driver to improve performance.
  Health is determined by the specific SSD S.M.A.R.T. attribute (s): #231 SSD life left

  I have Windows 7 Pro with all the updates that are 32-bit. I don't know what to do, can you help me?

  Ah, I have the controller in AHCI mode. (Default is ATA)

  Kind regards

  Zoli

  Hello!

  I removed driver the old Vista Matrix Storage, and now it works fine (100/100)!

  Sorry!

  Good luck!

• Backup impossible - Vista Ultimate, Dell XPS 420, WD 320 external (eSATA) drive - error 0 x 81000006 and 0 x 81000014

  Hello, I've had this problem for some time now, and it's very frustrating.  I can't save the disk correctly - there have been times that I've been able to do a full backup, but subsequent backups then failed, and other times, I can't yet do a full backup.

  I have a DELL XPS 420 PC, running Vista Ultimate.  I also have a 320 GB Western Digital external hard drive connected via eSATA.

  I had problems with backup from the beginning.  Previous suggestions have been to ensure that the drive is formatted in NTFS (it is) and to make sure that I am able to see the drive from the computer and access (I can).

  I got two different types of error messages:

  ================================
  Error message:

  The backup location cannot be found or is not valid. Check your backup settings and check your hardware configuration. (0 x 81000006)

  Backup time: 12-09-2009 01:05

  The backup location: My Book (z :))

  Error message:
  
  There is not enough space on your Windows drive to prepare for the backup of your files. At least 400 MB of free space is required to continue. (0 x 81000014)

  Backup time: 05/01/2010 18:38
  The backup location: My Book (z :))

  [Start over] [Settings] [Close]

  ==============================

  What could be the problem? What I might try?  Please let me know if I can provide any other information that might help.

  THANKS IN ADVANCE!

  Hey, Ronna,.

  Sorry I didn't saw this post earlier - I hope you were able to solve your problem.

  Here's what I figured out around miner (on mine - after hours and hours of research):

  The message 'no space' was more a message "no memory" for me - I understand that if I have a large number of open programs, that is causing the error.

  The other mistake, I was getting, it was simply that the external HD had stopped spinning - now, whenever it says backup failed because he could not find the hard drive I press the power button on the back of the drive (I have a MyBook Western Digital external hard drive 320), run it, and then it works fine.

  I hope this helps someone else.

  CJ33414

• Clean reinstallation of Windows Vista on a Latitude E6500 - what drivers?

  I am trying to wipe my Latitude E6500 & reinstall Windows Vista Home Edition. Have managed to install Vista, I am stuck at the part of the driver installation. Everything I read says I need to install the drivers for the chipset first. When I plug my Service tag on the page number drivers & downloads on the Dell Support website, there are 2 recommended drivers for the chipset - Intel AMT HECI, v.4.2.30.1040 PV, A03 & Intel AMT GROUND / A03 LMS, PV v.4.2.30.1040,. How can one to use?

  Hi dhjaffe,

  You can install both/all drivers from the chipset available for your service tag. There is no harm in it. Also here is the order in which the pilots should ideally be installed.

  Driver or application name	Category	What it does
  1 Dell System Software	System utilities	Provides critical updates and patches for the operating system.
  2 chipset driver	Chipset	Help Windows components control the map system and controllers, such as the USB ports and other internal components.
  3 PCMCIA and smart card drivers	Security	Measure of capacity of slot PCMCIA and smart card.
  4. Intel Matrix Storage Manager	Serial ATA	The Intel storage driver is only applicable to the Intel chipset computers.
  5. audio driver	Audio	Activates and enhances the audio controller.
  6 video driver	Video	Improves video performance.
  7. ethernet drivers or network interface card	Network	Improving internet access network or network controller.
  8. ControlPoint System Manager, Manager of ControlPoint and ControlPoint Connection Manager security  Note: This driver is required for some Latitude laptops, and depending on your system configuration, you do not have to install all three parts.	Control point	The Dell ControlPoint (DCP) controls the management of food for some Dell Latitude laptops. ControlPoint System Manager monitors the management of food and ambient light sensor settings, controls ControlPoint security features Security Manager and ControlPoint Connection Manager control wireless connection profiles.
  9 Dell Quickset	Application	Controls power management and ambient light sensors.
  10. wireless network drivers	Network	Activates and enhances the wireless network controller.
  11 Bluetooth drivers

  Note: If this driver is not available, then your computer does not have Bluetooth compatible. Continue to the next on the list driver.Network Controls and allows Bluetooth connectivity. 12 mouse, keyboard, touchpad and drivers for input devices Mouse, keyboard & input devices Enhances the pointing device features. 13 Intel AMT or vPro (if available) Chipset Improves the manageability of the system. 14 drivers wireless card Dell mobile broadband (if available) Network Allows wireless connectivity to broadband. 15 drivers modem (if available) Modem/Communications Allows dial-up capabilities. 16 Dell Digitech touchscreen driver (if available) Mouse, keyboard & input devices Allows you to enter key screen on some Dell laptops.

  Hope this helps

• __Upgrading for Vista Ultimate - Dell Inspiron 1420 can't restart and not sound

  I just upgraded from Vista Home to Vista Ultmate and my Dell Inspiron reboot correctly... remember to come by saying she does not restart... gives me a lot of options (safe mode,..., normally).  The only way to get it to start is to force a complete power down (holding the button power for 10 seconds) and then try to restart about 3 or 4 times.  Very weird.

  I also no longer work on board are involved.   I went one of the Dell forums and followed exactly the lwhat they said (add drivers in a specific order and restart each time) and it still doesn't work.

  Appreciate any help.

  Download and install the latest drivers:

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&CS=19&l=en&s=DHS&ServiceTag=&SystemID=INS_PNT_PM_1420&OS=WLH&OSL=en&CATID=&impid=

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• 0x00000002). code error on HP Photosmart C5280 All-in-one printer on Windows Vista Ultimate 32-bit

  There is something or someone blocks my printer to settle. Even go to configuration/Printers Control Panel I can't add the printer.

  Try adding "printer services" in windows components...

• Dell latitude e6500 windows startup problem

  Hello! I have a problem starting windows. The windows logo shows (at the start), and then the laptop displays a black screen which is 36 and 37 seconds. I continued to have this problem for 4-5 months when I was running windows 7. I have upgraded to windows 8 are contiguous 3 weeks ago and the problem disappear, but it reappeared a week ago. I will attach a file, ntbtlog and dxdiag info.

  Video: http://www.youtube.com/watch?v=jKOMcPfDgsw

  Ntbtlog: https://www.dropbox.com/s/u09ugc9jcax9ppm/ntbtlog.txt

  Dxdiag info: https://www.dropbox.com/s/lmv3jeemo4lxkjq/DxDiag.txt

  I hope you can help me, guys!

  Thank you.

  Start > cmd > enter > chkdsk/r > enter > Yes

• Cannot print on my Laser printer after SP 2 updated for VISTA Ultimate

  After updating vista Ultimate edition with Service Pack 2, I find that I can print is no longer through the network for Samsung CLX-6210-FX color laser printer. I can print directly via a USB card and through the IP - access the Samsung Sync Thru application, but windows network will not print to a printer and then

  What Samsung Support recommends to do?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  You can find additional assistance for Vista SP2 problems in microsoft.public.windows.vista.general newsgroup and in this forum: http://social.answers.microsoft.com/Forums/en-US/vistahardware/threads

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• New hard drive installed Vista Ultimate, now I can not install my printer - why?

  Computer Dell laptop hard drive replaced (warranty) with Vista Ultimate, I installed Office 2007 Professional disc 1 fine, windows update is fine, but I cannot complete the installation for my Kodak printer disc. Has been given the Internet to install via the internet address - link doesn't work either - drive flashing green bar "installation preparation" then nothing? Link Web shows 'Preparing to install' with a full bar green - then stuck there. A few minutes later, he disappears. Never installed. Do not open the drive or cross the bar - never open the Green window to install. Support Kodak decided that I was missing the .net on pre-installed OS HDD framework files. Enough of 3.45 and 4. Is this correct? Do I need previous versions, or something else is the cause. How can I check to see that all the files are correct and understand WHY I can not INSTALL MY PRINTER?

  Until the hard disk, memory & the keyboard have been replaced by the Dell tech, I had installed and printed on this Kodak printer for 9-12 months. Suggestions welcome.

  Hi LSMama,

  (1) you get an error message?

  (2) what is the model number of your printer?

  There could be several causes for this problem, try the following steps:

  Step 1: Run the troubleshooter printer available in the link below and then check

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Step 2:  Clean boot the computer and then try to install the printer

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• No sound on my Dell Inspiron 6000 when I updated to Windows Vista Ultimate

  original title: no sound on my Dell Inspiron 6000 went I've updated for Windows Vista Ultimate Edition

  I tried Microsoft solve this problem, that don't work, I want to Dell website and download the diver who don't work not "so I wonder if I con help."

  Hello

  Step 1: Try to update the drivers for sound card via windows update.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 2: Download windows XP drivers for sound card and install it in compatibility mode.
  Reference:
  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&OS=WW1&OSL=en&SystemID=INS_PNT_6000&CATID=-1&impid=-1
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-program-compatibility

  You can also try to contact Dell support for assistance on this issue team.
  http://en.community.Dell.com/
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen

• Dell Inspiron 1721 Win 7 ultimate upgrade on Vista ultimate. ATI Raid driver problems.

  I install Win 7 Ultimate on Windows Vista Ultimate Edition for my sister.  Although I am appalled by his duty to pay 200 more of the money it has paid to buy Vista Ultimate (for which she won Bitlocker and the possibility to join the areas, I have the following problem: she has a lot to gain a little and there are still problems in the installation of the OS.)  It would be good, at least, since it paid the price to have copies of the disks him were sent and more download (which I work with)

  I am trying to install the upgrade from 32-bit to Windows 7 on my laptop Dell Inspiron 1721 and I get an error that says I need to update my ATI AHCI Compatible RAID Driver. I went into the device drivers update as described in the instructions and tried to update the driver but it says I have the latest version of the driver for it. So I tried to restart my laptop and represented the upgrade installation and received the same error message.

  Can you advise me on how to solve the problem.  She has spent a lot of money and, at least, deserves to make it work!

  Hello

  You should check with the system manufacturer (Dell) and AMD/ATI possible as they write drivers.

  Dell support & drivers
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  AMD/ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Problem with Dell Latitude 2100 (with windows vista) is a driver (file: \windows\system32\drivers\msahci.sys) catch 22, it's that it doesn't have an internal cd-rom

  I have a dell latitude 2100 and when it is consumed first upward it goes to a screen of security and said that is wrong and it is said that the status of this file is 0xc000000f how I could fix this without an installation disk because it does not a cd-rom

  Hi Rick,

  Thanks for posting your query in Microsoft Community!

  The description of your problem, you are facing problems with your Dell Latitude 2100 and receiving tell them an error message which is bad and he said that the status of this file is 0xc000000f. In order to quickly provide a solution, please answer these questions:

  1. What is the exact error message with error code?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you check the drive for errors, and then check if it solves the problem.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

   

  Important: While running chkdsk on the drive, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.

  Method 2: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Note: It may prompt you to insert the Windows installation disc. However, you can use the external DVD player and check.

  Hope this information helps. Answer please if you have any additional questions about the problem you are having and we will be happy to help you further.

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Edition 64 bit vista Ultimate windows updates not available for Canon Laser Shot LBP-1120 printer driver

  I use the 64 bit vista ultimate windows edition and am not able to use my canon laser shot LBP-1120 printer because canon just provides a update driver software that supports only 32-bit version of vista. Please can someone help!

  Hello

  I'm sorry, but Canon are those who write and provision of the drivers for your printer.

  It may be time to upgrade your printer.

  See you soon.

• THE CALICO CAT WINDOWS DESKTOP BACKROUND WILL BE WORK ON A VISTA ULTIMATE 32-BIT WINDOWS AND ANY SERVICE PACKS DELL INSPIRON 531?

  I have a Dell Inspiron 531 in the House. It's Windows Vista Ultimate 32 bit without service pack. Can I download wallpaper cat Calico of Windows (r) and set it as background?

  Sincerely,.

  Numbuh3wearsabutterflycoutume

  PS I went on the site of Microsoft Windows to download, but I cancelled.

  Although the calico at http://windows.microsoft.com/en-US/windows/downloads/personalize/wallpaper-desktop-background cat is technically for Windows7, I don't see that this will not work on your system (since it is, after all, just an image).  Go ahead and try it.  I don't think that you will have problems with the issue of the service pack with just a background image.  If it does not or you cannot configure it to your liking, then maybe it does not match with the theme you are using (but which is not likely or must have its size adjusted before putting the context).  But I suspect that it will work fine.

  I hope this helps (and BTW, I LOVE the photo since I am a person cat myself).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.