Dell latitude E6440 processor update

Similar Questions

• Dell Latitude D620 processor update...

  Hi all, great forum you have here...

  I have an old Dell Latitude D620 and I want to upgrade the processor.  The specifications are the following:

  • Intel Core 2 Duo T5500 (1.66 GHz) CPU
  • 2 GB RAM DDR2-800
  • 60GB OCZ Vertex 2 SSD
  • Windows 7 Professional

  Am I correct in thinking that I can go to any processor 667 Mhz FSB?  SO what would be the fastest processor I can get (I think Core 2 Duo 7400 and 7600)?

  Looking at the Intel 845 chipset GM compatible products (http://ark.intel.com/products/chipsets/22816) that they do, but I thought I'd better check here first before buying.  Change from 2 MB to 4 MB L2 cache would affect something?

  Thank you very much!

  Gareth

  Either people will work - just do not pay too much on the one hand, because the speed boost will be progressive - not dramatic.

• Upgrade Dell Latitude E5510 processors

  I have a Latitude E5510 with an Intel Core i3-330M Processor (3M Cache, 2.13 GHz), socket rPGA988B. I would like to know if I can upgrade the processor to Intel Core i7-720QM Processor (6M Cache, 1.60 GHz)?(I have processor i7-720QM from a dead laptop).It is possible to do this processor upgrade?
  

  Thank you,
  

  Best regards
  

  Hi ruipais,

  Dell Latitude E5510 comes with an Intel Chipset HM55 Express. Please click the below link to find a list of compatible processors Intel HM55 Express Chipset:

  http://Intel.LY/W8rrSr

  Click on "Compatible products" for a list of compatible processors.

  Please update the BIOS before upgrade the processor. Click on the below link which will take you to the site of pilots:

  http://Dell.to/QjjZDA

  Enter the serial number of the computer and choose the operating system installed on the computer. Please upgrade to the latest version of the BIOS available.

  NOTE: Make sure that the adapter is plugged in and the battery is charged more than 30%.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• How to connect 2 Dell U2415 monitor on the docking station in combination with a Dell Latitude E7450 processor and controller

  Hi guys

  hope you can help me out here. I plan to buy some E7450 processor and controller of Dell's Latitude for our company with a docking station and some Dell Ultra Sharp 24 monitor - U2415. Aims to use the E7450 processor and controller with the dockinstation and connect 2 monitors U2415 of Dell. the issue here is. What type of cable do I need? should I buy 2 normal display port cables? It resolution things to work with this combination?

  Here the link of the monitor

  http://Accessories.AP.Dell.com/SNA/ProductDetail.aspx?c=HK&CS=hkdhs1&l=en&s=DHS&SKU=391-BBUW&redirect=1

  here some specifications of the dell Notebook printer

  Fix. You can also ask users on the laptop Video board on the platforms they use.

• Upgrade Dell Latitude E5520 processors

  I have a Latitude E5520 with an i3 2310M 2.10 GHz processor, socket rPGA988B. I want to upgrade the processor to an i7 which has 4 cores. I wanted to know of all the compatible processors that I could update.

  Thank you very much for the information.

• Latitude E7450 processor and controller I can resize using the touchpad

  Hi all new here so I hope that I write this in the right section.

  I am the proud owner of a Dell Latitude E7450 processor and controller. It's pretty awesome compared to my old Toshiba.

  One thing I was wondering, is it possible to resize using the touchpad as I used with my old laptop? I can use the touchscreen, but prefer not to if possible.

  When I opened the "Dell touchpad" pointing devices, it has settings for a mouse, which I suppose is the touchpad. In the tab "pointer of the" there are pointers for horizontal, vertical and diagonal resizing, so thought it was possible. But if I still worked not how.

  Thank you

  C

  Hello

  SOLVED! I've updated the BIOS and a chipset driver and all of a sudden I can use gestures on the touchpad. Also noticed a keyboard option and the touchpad appeared in "Dell Toucpad" program.

  Don't know what update has been charged, but happy!

• Latitude E6440 display blink when connect you to an external monitor via hdmi to VGA Converter

  Hi Dell Community,

  Please help me diagnose what's wrong with my new laptop.

  My laptop is Dell Latitude E6440, but whenever I connect external monitor to my laptop HDMI via HDMI port to the converter VGA, the external monitor still flashes randomly every two seconds. This VGA HDMI converter / works fine when I used it on the other laptop.

  Currently I still have the chance to try my laptop HDMI port to connect directly to a HDMI monitor because I don't.

  Is it that someone has the same problem with me? Thanks for your help.

  Dell currently manufactures replacements of main card to resolve this problem. They will be available at the end of July. Please make sure you have a current subscription and contact support to be eligible for replacement.

• Windows Update runs continuously after the installation/purchase program for Dell Latitude E6530 with Windows 7 Pro 64-bit

  Hello

  I bought a Dell Latitude E6530 'renovated', that was the end of the lease. (It was not defective). I started up and installed Dell help. I have had no trouble to do a few minor update of drivers. However, when I try to update Windows it just runs and.

  I checked the Windows Update with the troubleshooting Diagnostic Utility. I made sure that there is no infection or rootkits on your computer. I followed several suggestions I found the title of Microsoft Support positions and renamed the folder of Distribution system, as well as a few things of the reset. I have register/authenticate online with Microsoft Windows software.

  When I run the troubleshooter, it says registration for the Service is missing or damaged, and he said it suits him, but he can't solve "problems installation of recent updates. However, when I run it again, it is said that he correct once again.

  Any suggestions?

  Melissa

  Check this thread - it helped a lot of us:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

  Kimmo

• Latitude E7450 processor and controller, E - 2, unstable configuration port of the U2715H - two monitors-

  I have two monitors U2715H connected via a CDM-> DP cable each to a docking station E-Port Plus (in fact an Advanced Port Replicator EURO2) in which sits a laptop Latitude E7450 processor and controller. All items are brand new. E7450 processor and controller is equipped with 16 GB of RAM and two graphics cards: Intel HD 5500 Graphics and NVIDIA GeForce 840 M; selection is automatic, which usually means that the 5500 is running. It runs Windows 7 Enterprise SP1 (64-bit). The docking station has apparently DP 1.2 a capacity (for chaining) but DP 1.2 is disabled in both monitors.

  I have correctly configured the system to have Windows desktop space both monitors at 2560 x 1440 resolution, even with screen internal latitude as a third request for an extension to its full resolution (1920 x 1080). The main screen can be set to one of the two (or three) and I can successfully move the sequence of monitors around (left, middle, right).

  There is therefore no doubt about the ability of the system to support the planned configuration. However, when I dock the Latitude (most with the lid closed) and start, most of the time he is unable to restore the configuration of the two external monitors. Some of the symptoms are: one or two monitors go black, indicating the cable connected but no signal from the docking station. If there is a picture on one of the monitors at startup, it may or may not contain the login screen. (I can still log in because I know which keystrokes to send.) If the login screen is visible, it is usually in low resolution. If I have several active screens, but one is black, I can move the mouse pointer (or an entire window) on the screen black (in the middle or on the side), but it is not visible here.

  Both monitors come right out of the box and the only change I made is to move from the DP to the mDP as input channel. I reinstalled the cables and exchanged the cables between the two DPs on the docking station. I turned the market monitors. I ran the self-test the requirements on both monitors. The connection of the laptop on the docking station is a little wobbly, but I use the spacer provided for the E7450 processor and controller and making sure the connection is correct and stable. I've updated all the drivers and BIOS of processors E7450 and controller. I recently saw a reference to a BIOS for the docking station; I didn't know it existed, but I'm not.

  The installation instructions provided with the monitors were a note on consulting the CD provided for the use of the screen to maximum resolution. E7450 processor and controller is not an optical drive, but I read all of the documentation for the monitor to Support technical without finding what whatsoever to shed light on the situation (in addition to ensure that the graphics card and drivers are up to the task).

  Once I connected, I can manage to make it all in order by randomly (?) lower the resolution of the screen, change the position of the main screen (left-center-right), deselection reselection CDM as entry way and forcing other changes. Once the two or all three screens in operation, I can put them all to maximum resolution and beginning of work. However, it is rather annoying and I would like to have a stable configuration.

  The configuration seems to survive power cycling of the laptop / station but not if I also disconnect the laptop. I should mention that when I detach the E7450 processor and controller, I can use it in other configurations, with or without other external monitors through other ports, before turning it off and later re - anchor as described. However, for the first month I had two old non-moniteurs Dell of any resolution (on DVI and VGA ports) connected to the docking station and the configuration is stable, and for years I used for my older Latitude with a docking station that is older, remembering his device between different hardware configurations.

  Please, someone - and Dell support staff in particular?

  (Editing/updating after transfer of the Forum/devices/Forum/computer laptop and video monitors)

  A brief update of the Denmark...

  We have experienced the issue for several months since the purchase of laptops E7450 processor and controller and docks of Port E II.
  (HDMI screens / black screens with flashing DisplayPort).

  But the new Dock firmware A07 21 v3.10.1. April seems to have solved all our problems.

  Here is the link VMM3320 STD HUB Firmware for E5250/E5450/E5550/E7250/processors E7450 and controller:

  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?driverId=FV9KP&FILEID=3535351776&osCode=WT64A&ProductCode=latitude-E7450-Ultrabook&LanguageCode=en&CategoryID=VI

  Best regards
  Martin

• "Installing devices" break latitude E6440 OSD

  I'll have a few quirks with our TS and some of Dell's Latitude E6440s news we have received recently. I use the latest driver for Windows 7 (A06) pack in our SCCM 2007 environment. I have all the drivers that have been imported from this cabin, and it is applied during the TS specifically for this model using a driver Package. But I also tried just TSing an E6440 with auto-apply, but I see the same thing.

  Basically, it gets to "Setup installs devices" and from 65%, it will increase the percentage point ever 10 minutes or more. It eventually reaches 100%, blue screen and continue on the TS. The TS will end very well, but when you start the laptop, it will say that he is recovered from an unexpected shutdown. And the Wireless does not connect. removal of Device Manager and let Windows reinstall the driver allows him to return to work. No other oddities in the Device Manager.
  I tried to remove all the drivers and re-import. In the past when I ran into something like that, updated all drivers updated to the latest version usually solved this kind of problem. Unfortunately, the A06 pack already has the latest drivers. A singularity is that all new computers come with BIOS A08, though A07 is all that is available from Dell.
  Has anyone else seen elsewhere? (the pause and the incrementing every 10 minutes) I'm another TSing right now to check the logs in more depth, but can someone point me in the right direction?

  Thank you

  The Blue error screen, I got is the following: "DRIVER_POWER_STATE_FAILURE" although I don't have the specific error in front of me.

  And Yes, I deploy on several Dell models with zero problems. I use WMI filtering and CAB packages for each of them. The only problem I've had is with this specific model and CAB.

  Thanks to another mail list, they showed me the ATI video driver in the current version of the car. Although the models of E6440 which deploy us only have Intel graphics cards, I took their suggestions and the ATI video driver removed from the packaging. Which corrects the problem. No more crashes, blue screens is more in the TS and the wireless card is operational after the TS.

• Dell Latitude 10 + 8.1 Windows = display problems?

  Hi all

  I have a Dell Latitude 10 ST2 with processor Atom Z2760, official update 8.1 public today and is Intel Display driver no longer has recovered the kind of questions of standby with Intel drivers 9.14.3.1160 who came through via Windows update and are dated from the 16/06/2013!

  Intel and Dell have no other update even though we are all updated 8.1 today and I tried to use stock Microsoft ones ( replace character removed according to the TOU >) and can't get anything to work right - help?

  Hi again, there is some good news, it seems. My tablet today received a new update of the graphics driver through Windows Update. This is the version 1176 (8 November) and it seems that the issue of awakening has disappeared. It remains to be seen if it is stable in all directions. See you soon!

  Acer Iconia W510

• Dell Latitude Tablet: Error Code: 0xc0000034 in Windows 8 - data file for Boot Configuration missing required information

  Hello

  I compressed latitude 10 Dell with Windows 8 and the Intel Atom processor.

  After hibernation, when I tried to start the Tablet, I received this error message only after no previous problems for the last 15 months.

  It is said to use the Windows installation disc or a USB stick, which are not provided with the tablet. I don't even have the windows product key, because, as directed by Dell, the key is injected into the Tablet, and if necessary to check, it's done automatically.

  The system had all the recent updates and was fully charged when this happened.

  Please advice any option to solve this problem. Help, please.

  Ross

  Hey Ross,

  This error may be fixed by the repair or reconstruction of the Data of Configuration startup (BCD) store. However, this can be done with the help of installation of Windows 8 media.

  Here we have an OEM of Windows 8 pre-installed on your Dell Latitude 10 Tablet version. So, we have not the installation of Windows 8 media or product key. The best approach to work on this issue is therefore, contact Dell Technical Support for assistance.

  You can get in touch with Technical Support from Dell from the link below:

  Dell Contact information

  Hope it will be useful.

• Desktop on a Dell Latitude D510 problems

  Hi people out there. I'm on a Dell Latitude D510. Since 2 days back, I can hardly read what is on my screen and have resorted to connect a desktop monitor. I can make very very weakly, what is on my Dell screen, but the resolution is so bad I'm stuck. I followed all the stuff on the screen / control panel nothing happens. Help, please

  Hello

  • What were the changes made before the problem occurred?
  You can view these methods:
  Method 1:
  I suggest to try to change the resolution of the screen and check.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true
  Method 2:
  If above does not work, I suggest trying to update the graphics card and check.
  http://support.Microsoft.com/kb/283658
  Method 3:
  If above does not help, I suggest you try uninstall and then reinstall the Graphic card and check.
  http://support.Microsoft.com/kb/310126

• Windows media my dell latitude d610 player has no dvd decoder installed can get for free and install without disk

  My dell latitude 610 d a no dvd decoder is there a way to install without disk

  If you could play before commercial video DVD...
  do a system restore to a time before this started
  may be your solution.

  Or you could buy a DVD decoder at the following link:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

  Or you can download and use one of the following freeware
  media players:

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Or... you can try to download and install one of the
  Following codec packs.

  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates).

  * Proceed at your own risk *.

  (1) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  (Windows 2000 / XP / 2003 / Vista / Windows7 / XP64 / Vista64 / Windows7 64)

  (2) information on CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (XP SP1 or more, Vista, Windows 7 - 32 bit - 64 bit)

  (3) Windows 7 Codec Pack
  http://download.CNET.com/Windows-7-Codec-Pack/3000-13632_4-10965840.html
  (2000/XP/2003/Vista/Server 2008 / 7)

  (4) Media Player Codec Pack
  http://www.mediaplayercodecpack.com/
  (Windows XP - Vista - 7)

  Good luck...

• Dell latitude D-610 windows pack 3 service floor mat problems. Pointer freezes.

  My touchpad of Dell latitude D-610 does not often. The pointer will freeze for at least a few moments. I can sometimes resolve this problem for some time by putting the computer in standby mode and then resume the windows session. What can I do to fix this?

  Hello

  Download and update your http://supportapj.dell.com/support/downloads/driverslist.aspx?c=au&cs=audhs1&l=en&s=dhs&ServiceTag=&SystemID=LAT_PNT_PM_D610&os=WW1&osl=en&catid=&impidtouchpad drivers =

  Check if the problem persists, try to diagnosis of dell running from the dell cd and see if it's a hardware problem.

  I hope this helps.