Dell latitude e6500 windows startup problem
Hello! I have a problem starting windows. The windows logo shows (at the start), and then the laptop displays a black screen which is 36 and 37 seconds. I continued to have this problem for 4-5 months when I was running windows 7. I have upgraded to windows 8 are contiguous 3 weeks ago and the problem disappear, but it reappeared a week ago. I will attach a file, ntbtlog and dxdiag info.
Video: http://www.youtube.com/watch?v=jKOMcPfDgsw
Ntbtlog: https://www.dropbox.com/s/u09ugc9jcax9ppm/ntbtlog.txt
Dxdiag info: https://www.dropbox.com/s/lmv3jeemo4lxkjq/DxDiag.txt
I hope you can help me, guys!
Thank you.
Start > cmd > enter > chkdsk/r > enter > Yes
Tags: Dell Laptop
Similar Questions
-
Paint & Print Scrn compatibility-Vista Ultimate & Dell Latitude E6500
Greetings,
New laptop and new operating system so wholly unknown to the waters here.
On my recently deceased but beloved Toshiba Satellite, I used to click on 'Print screen', right click and paste in Paint. The print screen (Alt + Print Scrn on this computer Dell Latitude E6500) not to paste the image into Paint.
Any ideas as to how this can be resolved? Is it a matter of 'Dell '?Thank you
Non-techie, check if you need to press the fn (function) on your laptop before you press PRTSCN, you can tell if they are both the same color blue.
When you press ALT + PRTSCN, you capture only the window, when you click Print screen capture you the entire screen. Then, you press CTRL + V on your keyboard to paste. Rami
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Dell Latitude C600 - Windows 2000 Professional (W2K) - ATI mobility video driver 3
Hello Gang,
I'm the stage a clean installation of W2K after buying a new HD for the Latitude C600. I was unable to find the right video driver for the laptop. Can someone point to the driver of the following.
OS: Windows 2000 Professional
Dell Latitude C600
video? : ATI Mobility 3
Message edited by marshallgrads on 07/20/2008 17:12
-
Dell Latitude D610 dvd burner problems
Help! I have a computer dell laptop latitude d610. It came with dvd - rom. I bought a dvd on ebay writer who was supposed to be plug-and-play. It plays CDs and DVDs, but when I burn a cd or dvd, it burns fine and they will play in other PC, but will not play in the drive that makes them. There is no sense to me at all. I noticed that after the cd is written he opens the drawer and says to close but then it didn't anythingafter that. It is just a flag in the sequence of burning software saying unable to act. Ive tried different burning programs too. same result. I have the latest drivers. Any help would be appreciated.
Hello
· What is the brand and model of the external DVD drive?
· Burning software how do you use?
· Did you try to connect the device on another computer and check if you are facing a similar question?
I suggest you to uninstall all software burner and install a burner software and check if it works.
Follow the form of measures troubleshooting article and check if that helps.
How to troubleshoot problems that occur when you play a DVD in Windows XP
-
Software Audio Dell Inspiron 3542, Windows 10 problem,
Hey there! I had recently the problem to the software audio Dell stop - this is to show the levels of the bass and tone and other things like that, and I also noticed that the sound quality became worse too.
You can see the empty space that the levels were in it once
I will be very happy if someonr will help me solve this problem! Thank you
The latest Realtek audio driver for the Inspiron with Windows 10 3542 is this one. Follow the instructions under "Installation Instructions". Let me know if installing it does not solve the issue.
You can see all the drivers for Dell just introduced for your model in the page html Inspiron 3542. In the column 'Operating system', which are WT is for Windows 10. Those marked with a WB are for Windows 8.1. Those for XP, Vista and Win7 is clearly identified as such.
There is also the page Inspiron 3542 product supports, which has links to all the same drivers, but if you don't know how to navigate the support pages it can be difficult to find what you are looking for.
-
(Dell Latitude E6400) Windows 7 64 bit Dell control point
I installed Windows 7 64 bit on my Latitude E6400. I can't find any way to install the Dell Control Point. I got the Pack of drivers to install. I found a single download of the Security Manager who has worked, but I would like to than the power one Manager.
I looked on this forum a few times and all the links I click redirect just me at the page downloads and drivers. I get an error saying that my service pack is not supported... I'm on Windows 7 Service Pack 1. I have also some 32-bit errors, but it's my fault to have downloaded the 32 bit version.
Someone has a link to the full package of checkpoint Dell (Power Manager, Manager of connections, Security Manager) that works on Windows 7 64 bit?
Thank you
-Ryan
parrotrpg1
Here is a good article on reimage the Latitude E6400
Win 7 Control Point System Manager files are a little hard to find, but they can be downloaded from the following link.
www.dell.com/.../DriverFileFormats
This will help you if you have installed the drivers in the correct order.
TB
-
I can't access control panel because I get the message that this file is missing from local disk c. Windows\system32\rundll32.exe
I've looked everywhere. Help! I'm going nuts!
I can't access control panel because I get the message that this file is missing from local disk c. Windows\system32\rundll32.exe
I've looked everywhere. Help! I'm going nuts!
Have a complete analysis of the virus...
Then do this...
- Put the CD ROM Windows XP disc in the CD ROM drive
- Click Startand then click run.
- Type expand X : \i386\rundll32.ex_ c:\windows\system32\rundll32.exe in the Open box, where X is the letter of your CD drive.
- Restart the computer.
Already answered here...
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Windows-cannot-find-cwindowssystem32rundll32exe/664c5b59-515C-472e-A872-a41f3e0562c1
-
Dell Latitude Windows 7 - specific wifi has not detected
My Dell Latitude with Windows 7 installed detects all wifi network except my wifi at home (say 'mwifi')
All my other laptop, desktop, handheld can detect and connect to "mwifi".
Help, please.
Hello
Method 1:
Network convenience stores
http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
Method 2:
I would say you can check with the service WLAN is started and set to automatic, if the WLAN service is stopped, I suggest you to start the service and put it on automatic.
Please follow the steps to start the WLAN service.
(a) click Start, type services.msc in the Start Search box and press enter.
(b) select autoconfiguration WLAN Service in the list, right-click on Properties
(c) change the Startup type Automatic
(d) click the Start button
(e) click on apply, Ok.
(f) restart the computer and check if the wireless adapter is detected in Device Manager.
Check if it helps.
-
Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2
I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.
Thank you
Hello
Please join Microsoft Community where you can find the necessary information on Microsoft products!
You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.
The problem may occur if some of the components of the update are corrupt.
What is the full error message that you receive?
I suggest you follow the steps mentioned below to check if the problem is with the update components:
Method 1: Reset the update components
See the site:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Method 2: Run the system update readiness tool
See the site:
System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008
http://support.Microsoft.com/kb/947821
Method 3: Turn off the antivirus software
See the site:
Disable the anti-virus software
http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
I hope this helps. If the problem persists, let know us and we would be happy to help you.
-
Forgotten user name and password to connect to my OS XP Service pack 3 laptop of Dell Latitude 610
I have a Dell Latitude 610 Windows XP Service Pack 3, which I have not used in a few months due to some problems she was having. I try to boot mode safe, but not can't log into beca use I don't remember my user name or password. Once, I can solve the problems she was having and use correctly again. Any ideas on how to recover, reset, or be able to connect to my laptop computer system?
Hello
Maybe you can try to log on as a user 'administrator'in'Safe Mode', this user has no password (default).
LC
-
Can I put? Latitude D620 / Windows XP
Can I upgrade my Dell Latitude D620 Windows XP of Windows 8?
Also, is there a trial version so I can test it myself?
It will make my computer slower?
Thank you!
That's what I say. He will perform better as it is now with XP on it. An operating system is only as good as the hardware driver support...
-
On Windows XP, I am trying to find the physical address for my Dell Latitude D620, then I can use it to connect to the wireless router. When I go to start > run > ipconfig/all, a small screen flashes for a second or two, then disappears. You'd be able to get my physical address from the laptop to the ipconfig/all command screen? What is the problem and how can I fix? If not, is there another way to discover the physical address of my computer?
Hi Wendy12,
You can do the same thing from the command prompt.
a. Click Start click all programs.
b. click on accessories, then Command Prompt.
c. type the command, and then press ENTER.
Check to see if this article helps you.
How to troubleshoot wireless network connections in Windows XP Service Pack 2
-
Dell latitude D-610 windows pack 3 service floor mat problems. Pointer freezes.
My touchpad of Dell latitude D-610 does not often. The pointer will freeze for at least a few moments. I can sometimes resolve this problem for some time by putting the computer in standby mode and then resume the windows session. What can I do to fix this?
Hello
Download and update your http://supportapj.dell.com/support/downloads/driverslist.aspx?c=au&cs=audhs1&l=en&s=dhs&ServiceTag=&SystemID=LAT_PNT_PM_D610&os=WW1&osl=en&catid=&impidtouchpad drivers =
Check if the problem persists, try to diagnosis of dell running from the dell cd and see if it's a hardware problem.
I hope this helps.
-
I have a dell latitude 2100 and when it is consumed first upward it goes to a screen of security and said that is wrong and it is said that the status of this file is 0xc000000f how I could fix this without an installation disk because it does not a cd-rom
Hi Rick,
Thanks for posting your query in Microsoft Community!
The description of your problem, you are facing problems with your Dell Latitude 2100 and receiving tell them an error message which is bad and he said that the status of this file is 0xc000000f. In order to quickly provide a solution, please answer these questions:
1. What is the exact error message with error code?
2 did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest you check the drive for errors, and then check if it solves the problem.
Check your hard drive for errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
Important: While running chkdsk on the drive, if bad sectors are found on the hard drive when chkdsk attempts to repair this sector, the data available in this area may be lost, and it is not recoverable.
Method 2: Try the SFC (System File Checker) scan on the computer.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Note: It may prompt you to insert the Windows installation disc. However, you can use the external DVD player and check.
Hope this information helps. Answer please if you have any additional questions about the problem you are having and we will be happy to help you further.
-
Dear Sir, almost a year I bought the Tablet st 2 Dell Latitude with oem windows 8. After a few months, I go to 8.1 and it worked very well. But since August the year last, I am facing problem and my device hung on several occasions. I restored the device, I tried to restored on the plant but no help. Is it possible if I replace win 8 for windows 7 because I feel very uncomfortable.
Thanks & best regards,
Hassan jamal Shah
Please run a check of system files (SFC) & DISM if you're on win 8 or higherAll instructions are in our Wiki article below...
If you have any questions please ask us for .
Maybe you are looking for
-
I have a network camera and provides its own timestamp using the IMAQdxTimestampHigh and IMAQdxTimestampLow properties. I'm observing something that I don't expect - the timestamp seems to be extinguished by a single image. I have a simple VI which i
-
Win32/Qhost.ci or something like that
Hello I have something like that but you didn't exactly know please help!
-
How can I get the Basic for Windows Media Player codec pack?
original title: green screen recently started in windows media player for Vista 64-bit. It works very well for some videos (like those recorded uncompressed, or some codecs) but a single codec that I save it as coming out of Sony Vegas (Windows Media
-
adapter 802.11 multiband network broadband
Get a code 10 saying the device cannot start.
-
Recently added that in environment VMware ESXi hosts do not appear
I'm running worm vFoglight 6.7. recently, I added 2 new 5.1 ESXi host and 2 data stores into my vsphere cluster. These new fabrics do not appear in vfoglight under dash VMware environment. I tried to update the server vCenter added by re activating t