adapter 802.11 multiband network broadband

Similar Questions

• How to re - install something I deleted what is called the ralink wi - if adapter 802.11bgn rt5390r?

  Hello, I have a windows computer 8 and I deleted the so-called the ralink wi - if adapter 802.11bgn rt5390r. Now it doesn't let me connect to internet at all. It also won't let me restore my system because it says that there is something missing. I can't send back from my computer, what should I do.

  Separated from:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/reinstall-something-i-uninstalled/5d237279-6ccd-4946-B748-c9fc4ecf1d47#LastReply

  Hello

  What is the brand and model of the computer?

  I suggest you to download and install the drivers for the rt5390r of ralink 802.11bgn wi - if adapter from the manufacturers website and see if that helps.

  Download and install the drivers
  http://Windows.Microsoft.com/en-CA/Windows-8/all-drivers

  See also the link: wireless and wired network problems:
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Why should I get driver USB adapter 802.11 wireless b/g if I do not use wireless controls?

  Why should I get driver USB adapter 802.11 wireless b/g if I do not use wireless controls? Looks like it would be easier for someone else to spy on your computer.

  Then don't use it. Leave it or uninstall it...

• Network adapter 802.11n keeps stalling in Message' no. get error Windows 7 drivers are installed for this device. »

  Original title: 802.11n network adapter keeps dropping out

  My network card, Ralink 802.11n for Windows 7 Professional 64-bit, continues to stall as I have no connection to any network.  When I check the network card, he said, "no drivers are installed for this device."  If I try to update the driver, it indicates that the drivers are up to date.  The only way to get the device working properly is to shut down the laptop and restart.  When I do this the device manager says that the network card is working properly.  I looked at other solutions, but none of them seem quite fit.  I use a HP probook 4320 s laptop and I recently installed a I have to drive with the Windows 7 software pre-installed on the drive.

  Hello

  According to the description, I understand in your computer continues network to drop out of school and gives the error that "no drivers are installed for this device. I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem.

  This problem may occur because of corruption in the network driver or the network driver is not properly installed in your computer.

  Please follow the troubleshooting mentioned method below to check if his help.

  Method 1: run the network troubleshooter utility.

  The problem report contains one or more event logs. Administrators Network and technical support staff can use the information in the event logs to analyze connectivity problems or help interpret the findings. You can find this information by clicking on display of detailed information on the last page of the troubleshooting tool, or by following these steps:

  1. Open troubleshooting by clicking the Start button, on Panel configuration, and then, under system and security, clicking on find and fix problems.
  2. In the left pane, click View history.
  3. Right click on the troubleshooting report, and then click details.

  If the problem persists, follow the next method.

  Method 2: uninstall and reinstall the network driver.

  Please follow the steps below.

  1. Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In Device Manager, look for the network adapter.
  3. Right-click on the adapter and select uninstall.
  4. After uninstalling the network driver restart the driver.

  After the computer restarts, Windows will automatically try to install the driver real network. If not, I recommend you download the latest driver available from the manufacturer's Web site and check if its help.

  Please follow the below link to download the driver from the manufacturer websites (HP) network.

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4145372&swLangOid=8&swEnvOid=4059

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• HP 802.11 wireless network adapter b/g

  Hi all

  I have a m7580n and I currently installed windows 8.1 pro... I had xp, 7, ubuntu and linux mint recently on this machine before I was removed from my hard drive and installed windows 8... Use this adapter instantly don't read by all these bones at the point where starts the machine and I had no problem, but for some reason any windows 8 no luck, I installed all the windows, each one updates, I've tried everything I can think of with no luck.  Will someone please help me get this to work?... also argues that the device cannot start if that helps

  Ok.

  It is no more a problem.

  Download and save the file, but do not run it.

  Download and install the free utility 7-zip file from the link below.

  http://7-zip.org/

  After installing 7 - zip, right-click on the HP driver file and select 7 - zip option from the list and have 7 - zip to extract the contents of the Elf in a folder.

  I usually select the option to unzip it in the file name of the file that is in this case sp34931.

  Then just browse whenever this file is on your PC and follow step 2 (and 3 If you have to).

• Feature wide network Broadband Mobile T440

  Hello I just got a new Thinkpad T440 (running under Windows 7 64-bit) and I noticed, he got the SIM tray on its left side.

  I now try to activate the functionality of broadband services, but even the installation of the driver for Broadband Mobile Ericsson N5321gw material seems to be missing.

  How can I activate the wireless WAN card?

  Thank you in advance!
  Concerning

  Valerio

  valerio_canc,

  Unfortunately, it is not wwan adapter in your laptop. Laptop specs short descriptions on the Lenovo site includes the words "WWAN option. This means laptop is "wwan ready" has only - player of sim cards and wwan antenna installed, no wwan modem itself.

  Device Manager confirms that.

• HELP linksys wireless USB adapter: (model # WUSB54GC) "acquiring network address" not actually connect to the internet! ?? Windows xp pro

  Hello. Ive been at this for 4 days now, I can't find a solution. I'll try to remember as much as possible regarding what ive tried.

  here goes...

  long story short, due to unfortunate system errors, I have reinstalled my OS XP home to xp pro. PC works great now! problem is... now my wireless adapter wont connect to the internet.

  When I had xp home edition installed, I could just plug in the adapter, and a few seconds, it would connect to the favorite network. (with all settings on Auto) no problem.

  now that ive put in OS, it's just cycling "absorbing the network address" infinitely...

  his watch the access point, the preferred network, showing the signal strength and do not show errors in Device Manager. right-click and choosing fix do not work. It gets stuck @ renewing IP address scene. its not send or receive packets under status.

  He EXPECTED to be functional? It uses a 10-digit WEP key.

  Ive tried both the linksys wireless monitor and the windows zero configuration utilites.i since removed the lynksys software screen because it never worked anyway. WZC is that used to work on xp family.

  I used " ipconfig/all" to determine the values of the network on the host pc. I tried manually punching in those values (IP address, subnet mask, gateway and DNS settings, according to the suggestion of a networking of friends) on the adapter wireless itself; using tci/ip options. still does not connect.

  Ive tried different USB ports, all that seems to do is to change the number of the wireless connection.

  It just does not connect to the internet.

  I have the driver I need for this after contacting linksys. I also disabled windows firewall and the firewall/antivirus of 3rd party associated with the network.

  He knows questions w / windows xp professional and this particular wireless adapter? (WUSB54GC) that's the only reason why I can think of that is not connected.

  what I forget? internet hard wiring of an ethernet port is not an option because there is no ethernet card installed in the pc.

  any help is greatly appreciated in advance.

  Thank you.

  Sorry it took so long for me to return.

  It was a setting under working group which had to be adjusted from reinstalling windows. (something that has been disabled I forgot, don't remember what it was since its been like 3 weeks)

  that he got the running dhcp... That is to say. allowed 4 dependence to work progrmas, boom, problem solved.

  the adapter now works with the automatic settings, using WEP encryption. as it should, and it was.

  Thank you very much for the replies, I appreciated the help.

• I have a windows vista desktop computer. My usb adapter see all fi networks wi and the lapttops work with it, but it says that it cannot connect when I try to connect. What is my settings on my pc?

  My computer settings re-put recently. It's not the adapter I bought a new and the wi - fi works very well. Help, please! I already did the thing where you go on manage wi fi represents and has deleted information and tried again, but they don't seem to work.

  Hello

  
  

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  
  

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

• HP C7280 printer all-in-one - it's will work with 802.11n wireless networks?

  currently a hp c7280 printer all-in-one that supports 802.11 networks G, but will it work if I install a new router configured for a 802.11n network? I need to download any new drivers or software if I upgrade the routers? Thank you, Glenn

  No it will not work if you configure your new router in the 802.11n ONLY.  However, the router will have a configuration that includes 802.11 g.  It will look something like the 802.11 g/n in the router configuration.

  If you make this change, you need to load new software.  However, you will need to re - connect the printer to the new network, just as you want with your computers.

• NETGEAR wireless adapter connects to a network other than mine.

  I started using a NETGEAR wireless adapter and it worked very well, always connect to my NETGEAR network. Then a few days later he began connecting to the default profile for the Native WIFI instead of NETGEAR. This part of the Windows 7 operating system, or someone is hack my wireless connection? How can I get rid of him? I reconnect to my network, but it reconnects to the Native WIFI default profile. Any help or info is greatly appreciated.

  original title: Native WIFI by default profile

  Radron,

  "Native WIFI" usually refers to a Windows SDK API and it is more likely that it is a programming error that someone hack into your system.

  I begin by visiting the site Web of Netgear, enter the model number of your wireless adapter and install the latest drivers for Windows 7:
  http://KB.NETGEAR.com/app/

  I'm fairly certain that updating the drivers will solve this problem. If not, switch to update the firmware on your router.

  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Integrating a wired 802.1 X network with a wireless 802.1 X network

  Hi all

  We currently have a network of 802. 1 x wired using Cisco 3500 and switches of the 2900 series.

  We add a wireless using LWAPP network and a WLC 2106. The question I have is can I restrict users logging in to different SSID.

  Thus on the wired network user connects and is placed on VLAN A and user B goes on VLAN B. On the wireless side I assign each SSID to a VLAN, but I find that the WLC2106 isn't news VLAN (this is logical because it uses no VTP trunks). So I configured a NonIP NAR on the ACS server, but I found that if I apply this single VLAN A UserA is allowed to access the SSID, but it breaks the Wired 802. 1 X (wired does not send DNIS attribute, or if this is the case I don't know what it is). If I add a second condition with all the * leave then if a condition is met I again open WLan to all users authenticating to.

  Right now, the only way I can see this working is if I have two separate Radius servers (one for the wireless) and one for the magazine Wired or Cisco makes a controller that allows the circuits and is smart enough to read the parameters of VIRTUAL LAN on the Wired side.

  Does anyone have any suggestions?

  Thank you

  Is this what you need?

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml>

  Don't know what you're trying to do, except need assignment of VLANS on your 2106, which deserves to be supported.

  Hope this helps,

• How to enable the wireless adapter to Ad-Hoc networks.

  I am running windows 7 ultimate. And I have an adapter Wireless N I have my Htc touch pro that sends a special signal.  I'm trying my darnest to get my wireless card to see. but I can't do. How would I do this on windows 7? How can I activate my wireless card to see my adhoc network.

  Also, I use a home office computer.

  See what...

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• Trying mobile home: adapter USB remote NDIS network device knows of driver or hardware-related problems?

  Hi all! don't know not if this is the place to post this, because the phone is new and without further problems, consider a Windows problem.

  I recently signed up for three is a plan with tethering on a Galaxy Note 1, but Windows 8 is having a little keep track of it such as GT-7000 in the folders under computer as it appears then disappears at random, but it is OK for most of the problems, I enabled USB attached to the ticket tethering Android-setting-Tethering and mobile hotspot-USB but no love It just won't save the connection in network and center of shear in Windows :(
  The following help pages watched with no luck:
  https://support.Google.com/Android/answer/182134?hl=en-GB 
  https://support.Google.com/Android/answer/168932

  There only by unplugging my wired ethernet is I managed to find the following error message, through correction problem.

  Problem found

  The samsung mobile knows remote NDIS device USB network adapter driver or problems related to the equipment, do not set
  My build, if any:
  Silverstone SST-FT02B-W / Asus Maximus V Gene / Intel core i5 - 3570 k, Samsung 8 GB, Dark Green rock pro 2 / EVGA GTX 780, current high Antec pro 750w / Samsung SSD 830 256 GB, Win 8 pro.

  Hello

  Thanks for the reply.

  If you install new drivers, and you have a problem, restore drivers gives you an easy way to revert to the previous version of the driver in question.

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

  I had the same problem today: (Sony Vaio Flip 15 w / Win 8.1, Samsung Galaxy S4).

  However, I created my problem trying to use 'VAIO Control Center', which allows the user to screening of certain factors, such as the default printer, based on the network connection.  This software is not "USB" as a source of network and by default to the local network.  On exitting, the software corrupted the registry.

  Roll back the driver as described above restored Internet access through the strap of the USB.  Windows Update has provided the new driver.

  The copy is also placed on the Sony support site.

• Satellite P300 PSPCCE: Atheros AR9281 wireless network adapter are not all networks

  I have a Satellite P300 PSPCCE with Atheros AR9281 wireless network.

  After a clean install of Windows 7, I can't see wireless networks, unless I connect an Ethernet cable to my wired network card.

  As soon as I take the cable on wireless networks disappear. This computer had Vista and it worked fine there. I tried latest drivers available from Toshiba, but that makes no difference.

  I have tried disabling the wireless and turn market as well with the FN and F8 key and switch on the front. I also tried to uninstall. But it's always the same.

  If someone has had this problem and is there a solution to this?

  Bjarni cordially

  Hi mate

  To be honest I never did experience even with a WiFi card and I have no idea why the LAN cable affects WLan card functionality, it makes no sense to me!

  First, I recommend that you check the settings of the router and reset if necessary
  In addition, you should go to the s for laptop BIOS settings and set its default value.
  Check the version of the BIOS if newest is available, then an update would be worth a try

  You use the Atheros Wlan configuration tool?
  If this is not the case, try this out!
  It s a configuration tool that could be used instead of owning windows wlan settings

• LIte on USB WiFi adapter 802.11 b/g

  The foregoing not lodged in my HP Pavilion s5320, but I'm unable to establish a stable wireless with a new Superhub provided by Virgin Media. This hub is N Wireless and it was suggested by VM that this adapter is not suitable with Microsoft virtual Mini Port adapter mounted in the office. I am a 64-bit Windows 7 system operating. Any help gratefully received.

  Let us know about how this work out for you BUD. Good luck.