Dell network Assistant

Similar Questions

• In the Windows Installer box - insert Dell network Assistance

  original title: Windows Installer box.

  Windows Installer box - message says:

  "The feature you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert the disc "Dell network Assistance.

  I don't know which disk i.e. - any ideas.

  Occurs when I try to open MS Word or something in the office.

  WORKED FINE YESTERDAY

  Help

  Hello

  ·         This only happens when you use Office applications?

  Try to reinstall network of Dell since the Dell software came with the computer and check if this is useful.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Equivalents of syntax. Dell Networking OS 6 PowerConnect

  I have a few new switches Dell Networking N3xxx and try to configure via the command line.  I'm too good with the old OS powerconnect switch, so I'm looking for a few equivalents of syntax.  In particular:

  1. on a powerconnect switch, when you wanted to create a high, user account should look like this:

  level of fred username pass mypassword 15

  The OS 6, it will not allow '15 level' which is the equivalent in OS 6?

  2. on a powerconnect switch, when you wanted to create a VLAN, it looked like:

  database of VLAN

  VLAN [#]

  The OS 6, he doesn't like something like that.  What would be the equivalent in OS 6?

  Are there resources that could help?

  There was a few syntax changes in the newer operating system. I find the easiest way to find the difference is to look for the cli for similar commands guide.

  For the user, you would use:

  Console (config) # username bob xxxyyymmm privilege 15 password

  For use in creation of VLANs:

  Console (config) #vlan 22,23,56

  Here is a link to the CLI user guides can help during the transition period.

  http://bit.LY/1sH2ov6

  http://bit.LY/1w3o3P0

  I would like to know if there are other commands you need assistance.

  See you soon

• Cisco Network Assistant

  Hello

  Anyone know how really peripheral can be added in the community and manage through CNS version 6? I read on the website of cisco that Cisco Network Assistant can support up to 40 aircraft in the community, I don't know if it was for the previous ANC 5.0 version as shown in the link http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/network-assistant/product_data_sheet0900aecd8068820a.html for switches 40 or less while watching in the version 6.1 of the ANC data sheet , he also mentions the community limiting to 40 devices while the following link http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/network-assistant/datasheet-c78-730210.html shows that for switches 40 or less. Will be looking forward to seeing the answers.

  Thank you

  Waydee

  Hi Waydee

  Please refer to the for Cisco Network Assistant Release Notes 6.0 and later versions , where you can find all of the changes. In summary the community limits are same (max 40) compared to the old version (5) of the CNA.

• Cannot connect Cisco Network Assistant to 2911 router

  I'm trying to connect my Cisco 2911 router to my community at the NAC.  I can see the routers in terms of topology, but when I try to add to the community I get an error message indicating that the router is inaccessible (cannot connect).  I can ping client device of soul. I can view the properties of the device to the card (device type: CISCO2911/K9). Telenet attempt connection, but we have only use SSH for connectivity (the same as all my switches that are connected to the community).  2911 is listed as a taken router supported on the Cisco site.

  Any quesses what I am doing wrong?

  Thanks in advance.

  J

  Hello
  You must enable http for can work.

  http://kirkpbm.WordPress.com/2008/07/13/Cisco-network-assistant-enabling...
  Pls link for other instructions above check.

  Rgds/DP
  Sent by Cisco Support technique iPad App

• Cisco Network Assistant 5.5

  I downloaded Cisco Network Assistant 5.5, every time when I try to run I get the error message "can't creat Java virtual Machine"any idea how to solve this problem? ".

  I  downloaded Cisco Network Assistant 5.5, everytime when I try to run I get error message "Could not creat Java virtual Machine' any idea how to solve this?

  To work around this problem, open the file C:\Program Cisco Systems\CiscoSMB\Cisco network Assistant\startup\startup.properties (the default installation path) and modify this entry:

  JVM_MAXIMUM_HEAP = 1024 m

  Replace 1 024 m with a bass that does not exceed the available RAM. There is no way to predict what value will work. Try 512m and drops even if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to set your own dial peers.

  Go to the link for more information below

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_network_assistant/version5_0/release/notes/OL12210a.html

  Hope to help!

  Ganesh.H

  Don't forget to note the useful message

• ISE 1.4 and Apple 'captive Network Assistant"causing problems

  I'm testing ISE 1.4 with 10.10.2/Safari 8.0.3 MAC and the boring revised downward Safari AKA "Captive Network Assistant" gets in the way.  I wonder what other people did to work around.

  According to the compatibility of network component Cisco ISE v1.4 Safari I must be compatible, in captivity Network Assistant says that this isn't, but I suspect its because the computer MAC laptop try to validate with ~ 200 areas (so I hear for this).  My ISE/WLC have a DACL that allows certain IP addresses before finishing the AuthC/Z, and obviously I can't put in the DACL for all 200 of these areas.  My ISE is configured with trustsec model where I have two SSID, a first on the front-end to detect if Anyconnect 4.x is installed and if it is not then redirect to a portal.  Fails it MAC peripheral security check cause... or should I say will not display it. cause Apple Network Assistant captive.

  I know I can disable the captive Network Wizard by renaming the file, but it will probably not an acceptable solution in my environment for political reasons.  I wonder what others have done to bypass this annoying problem.  Maybe something with a DNS record or something...

  Thank you

  e-

  Common recommendation is to deceive the apple devices to think he has access to the internet by running this command on the command-line of your WLC:

  config network web-auth captive-bypass enable

• Dell IT Assistant reference - what is the latest version?

  Hello

  We organize currently Dell IT Assistant 8.0.1, is there a newer version available for download? If yes where can I find this...

  Trying to find it on the site Web of Dells is like a needle in a haystack.

  See you soon,.

  
  

• How to scan a document multi-page with preview in macOS Sierra with Scanner and printer Dell network?

  Hello, I know that macOS Sierra had a big problem with PDF / scanning due to an update to the pdf engine. Here we have Dell printers / scanners Dell C3765dnf Color MFP. We usually scan with Preview app (import of the device). But with macOS Sierra, the scanner scans all pages but the first page is available after the scanning process. Maybe can someone help?

  Have you tried scanning with Capture of Image?

• Network Assistant will not connect pc to the LAN, but connect to the internet properly

  My main PC had been connected to a local network of four PC but abruptly dropped from the network.  I can connect to the internet OK, but the wizard does not reconnect me to the local home network.  I read other articles on test and checks and everything seems to be okay, but when I check my network places other computers are running and are not displayed.

  Try the following and see if it helps:

  "You can not access the shared files and folders or browse computers in the workgroup with Windows XP"
    <>http://support.Microsoft.com/kb/318030 >

  HTH,
  JW

• LaserJet 2100 direct connect network assistance

  Hello techies.  I need help please.

  I have a HP Laserjet 2100 printer with a Jetdirect 600n (J3110A) card I am using with my plug for laptop Compaq V2615US as a direct connection.  It is without a server between the computer and the printer.

  Has been fighting for more than a week. Time for me to reach and ask for help.

  It is not recognized.

  Print a page of Cofiguration Jetdirect info I get the following information:

  LAN HW address: 001083F3A247

  External Loopback 03 error is NOT READY i/o card

  TCP/IP STATUS: 55 CURRENT BOOTP/DHCP

  HOST NAME: NPIF3A247

  IP address: 0.0.0.0

  IPX/SPX STAUUS: impossible to 29 net number of senses

  NAME OF THE NŒUD: NPIF3A247

  I was able to CLEAR the error of closure by doing a loopback plug.

  Using the network printer wizard I tried individually enter either the host name, IP address, LAN HW or name of the node above the address in the appropriate box.  NONE of them worked.

  Somewhere, I saw a reference to a supposed "default" IP address of the 192.0.0.192.  Tried it as an IP address, nothing helps. Received a message on the screen indicating that it was a 'default' address and suggesting that it was not fair.

  My computer's network card is a Realtek 8139/810 x Family card that is declared as working correctly by my computer and has already been used in the past in this way with a different printer.

  Key questions are:

  1 what I'm missing or doing wrong?

  2 - is a dead Jetdirect card?

  I can access a Jetdirect 620n card, but the application list I've seen doesn't have the list of the 2100 as a printer there.

  It would be worth to try myself to a substitution of the 620n for my 600n card?

  Thanks in advance for your help.

  John

  "LittleJohn1969" wrote in message News: * e-mail address is removed from the privacy * .com...

  Hello techies.  I need help please.

  I have a HP Laserjet 2100 printer with a Jetdirect 600n (J3110A) card I am using with my plug for laptop Compaq V2615US as a direct connection.  It is without a server between the computer and the printer.

  Has been fighting for more than a week. Time for me to reach and ask for help.

  It is not recognized.

  Print a page of Cofiguration Jetdirect info I get the following information:

  LAN HW address: 001083F3A247

  External Loopback 03 error is NOT READY i/o card

  TCP/IP STATUS: 55 CURRENT BOOTP/DHCP

  HOST NAME: NPIF3A247

  IP address: 0.0.0.0

  IPX/SPX STAUUS: impossible to 29 net number of senses

  NAME OF THE NŒUD: NPIF3A247

  I was able to CLEAR the error of closure by doing a loopback plug.

  Using the network printer wizard I tried individually enter either the host name, IP address, LAN HW or name of the node above the address in the appropriate box.  NONE of them worked.

  Somewhere, I saw a reference to a supposed "default" IP address of the 192.0.0.192.  Tried it as an IP address, nothing helps. Received a message on the screen indicating that it was a 'default' address and suggesting that it was not fair.

  My computer's network card is a Realtek 8139/810 x Family card that is declared as working correctly by my computer and has already been used in the past in this way with a different printer.

  Key questions are:

  1 what I'm missing or doing wrong?

  2 - is a dead Jetdirect card?

  I can access a Jetdirect 620n card, but the application list I've seen doesn't have the list of the 2100 as a printer there.

  It would be worth to try myself to a substitution of the 620n for my 600n card?

  Thanks in advance for your help.

  John

  Without any kind of switch between the printer and the computer, you absolutely have a cable modem Simulator for your connection "ethernet".  You will NOT be able to use a standard ethernet cable.
   
  Once you find this crossover cable and that you ran a test on the printer print to the default IP address (read the printer or jet direct instructions on the card to print or otherwise find the Jetdirect card settings) then you can create a new "printer port" using the IP address of the card direct jet to join the two.    192.0.0.192 isn't usually an IP address by any device (I've never seen anywhere.)  It would more likely be something like 192.168.1.xxx.
   
  Also, you should be able to buy a switch 4 ports and do the same thing with standard ethernet cables.  Plug the computer and jet direct card printer on the switch.

• Network Assistant unable to finish the configuration of network domestic

  I'm trying to set up a network using the wizard, whenever I try to use the created dsc (Firewall window files are corrupt and cannot reset) I use Win XP on all computers. Firewall off

  There is no need to use the created disc.  Run the Configuration Wizard from the network on each computer by clicking on its icon in Start > all programs > Accessories > Communications . Boulder computer Maven
  Most Microsoft Valuable Professional

• Deliver the Xbox 360 to laptop Dell networking that works with Vista

  I am trying to network my xbox 360 with my laptop, so I can share multimedia files, and I made all the necessary changes (change the privacy setting of the network in 'private' and ran several diagnostics of connection problems, blah blah blah).  but nothing has worked.  could someone tell me what the heck I'm supposed to do? and when the devil they start charging for chat with technical support technicians?

  Hello

  I will need some additional information to help you best.

  Ø what happens when you try to connect your Xbox with your laptop?

  Ensure that the network discovery, file sharing and media are turned on.

  Follow the instructions to check if network discovery is enabled.

  1. click on start and Control Panel.

  2. then network and sharing Center

  3. Discovery Network: WE

  Follow the instructions in the link below that may help you resolve the issue.

  Solve problems with a Windows Media Center Extender device

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-a-Windows-Media-Center-Extender-device

  You can see the link below for more information on connecting your Xbox with your laptop.

  Demonstration: Creating an Xbox 360 in an Extender for Windows Media Center unit

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-setting-up-an-Xbox-360-as-an-Extender-for-Windows-Media-Center

  Set up a Windows Media Center Extender device

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  Use a Windows Media Center Extender device

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-a-Windows-Media-Center-Extender-device

  See the link below for more information on the options, services and support prices.

  https://support.Microsoft.com/OAS/default.aspx?Gprid=11732&St=1

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Dell network adapter is not recognize on os guess

  I have a dell server 2950 vmhost esxi nic work very well on the host, but it seems disconnected and ethernet control warrning

  there a version for windows 2008 std on vm esxi how it works

  Do you have the VMware tools installed in the comments?

  -Matt

• Reference Dell Image Assist restore and capture the location of newspapers

  Does anyone know where the newspapers capture and restore?

  ImageAssist newspapers are in c:\windows\panther\dtri\logs.

  Of in the PE ImageAssist ignition key, they will be in memory - but can be captured. Read the following article.

  • Capture troubleshooting logs