Dell PowerEdge C2100 FS12-TY unknown Expander, PERC 6i/r - error (?) dDm

Similar Questions

• RAID 1 support on Dell PowerEdge R730 with SSD and Perc H730 discs

  Hello. I am looking for some info on RAID usage with SSDS on our server:

  Dell PowerEdge R730
  1 GB for the PERC RAID controller cache internal H730
  200 GB Solid State Drive SAS mixed use MLC 12 Gbit/s, 2.5-inch
  OS Windows 2008 R2 (for now)

  We would like to know if it is supported to use two SSD drives in a RAID 1 configuration.

  What are the risks?
  Suggestions for others / the best solutions?
  How the controller or the handle of the Garbage collection, Trim and other techniques SSD SSD?
  Are there solutions in place for Wear leveling and how do they work?
  What are the methods of protection for the I/O failures for these SSD drives and / or PERC controllers?

  I hope you can answer (some of) the issue or point me in the right direction for some Dell documents on this subject.

  THX

  Arjan

  Hello Arjan

  Yes, you can use SSDS in RAID 1.

  The controller supports the TRIM and cancel orders mapping. SSD MLC are grade consumer SSD which will not have the life expectancy of SLC.

  http://i.Dell.com/sites/DocContent/shared-content/data-sheets/en/documents/Dell-PowerEdge-RAID-controller-H730.PDF

  http://www.Dell.com/learn/us/en/04/campaigns/Dell-RAID-controllers

  Thank you

• DELL PowerEdge R710 and PERC H700 RAID driver for WIn 2008 Std

  Hi all

  I have a DELL PowerEdge R710 with a controller RAID PERC H700.

  I try to install Windows 2008 Std 64 bit, but I can't find the driver. Even for the site web at support.dell.com. Can someone help me.

  THX in advance

  Even if you use a driver of 2008, it should at least recognize it, then you must be using the wrong driver or something wrong :)

  If you are installing 2008 R2, make sure that you use this file:

  If you install 2008 x 64, make sure that you use this file:

  With one, you must first unlock the .exe (right click on the .exe, properties, unlock), unzip / extract the files (run it and make a note of the default location), and then copy the 4 files on a CD, USB, etc., then when Windows tells you that he is not all hard disks, click on the link drivers load below to load the drivers from the media you have chosen.

• DELL PowerEdge 2950 PERC 5 / i

  Dear members,

  I have server Dell PowerEdge 2950, I need to install Windows 2003 Standard Edition and save it as a file server for my network.

  So I bought 2 TB SATA WD HDD, I would like to create RAID 1.

  As a trial, I connected two 145 GB SAS and a 2 TB SATA Bay and switch ON create RAID1.

  Please guide me how to create RAID 1 using PERC 5 / i utility of configuration?

  My version 5 PERC / i integrated 5.0.2.0003.

  Thank you

  Tony

  You cannot mix SAS and SATA drives in a RAID array.

• Dell PowerEdge T320 PERC H710P Upgrade

  Dear support, I have a Dell PowerEdge T320 server that was purchased with a software RAID controller in S100.  I just bought a PERC H710P controller and hoped to help on the installation.  Do I need anything else to install the card as a set of cables?  I have a 8 x 3.5 "hot swappable backplane already installed with a pair of cables SAS that connect to the motherboard.  What else do I need to do this work?  I'm also not sure where the PERC H710P controller must be installed?  I can't find pictures or drawings on the Internet.

  Thank you

  Joe

  Jpmigliozzi,

  You should also order the cable (part # DJXF7) as well. This is the cable that connects the 710 in the bottom of the basket 8 x 3.5. Look at the picture below and let me know if those are the cables you already have.

  

  Let me know.

• Windows 7 on the server Dell PowerEdge T620

  Can I install Windows 7 on a Dell PowerEdge T620 server with these specs?

  Card mother TPM

  Intel Xeon 2.00 GHz E5-2620, cover 15 M, 7.2GT / s QPI, Turbo, 6 c 95W

  Chassis with up to 8, 3.5 "hard drives of type Tower

  1333 MHz RDIMMs 1

  8GB RDIMMS, 1333 MHz, low-voltage, Dual Rank x 4

  Intel Xeon 2.00 GHz E5-2620, cover 15 M, 7.2GT / s QPI, Turbo, 6 c 95W

  600 GB 3.5 inch 15K rpm, 6 GB/s SAS Hot Plug hard drive

  PERC RAID controller integrated H710, Cache 512 MB of NV, full height

  16 x SATA DVD + /-RW Drive (with RAM) for Ms 2008 R2

  Worst case, you can resell, install a server on it, operating system etc and put it in your living room to show off :)  The case of CaseLabs looks cool, but you'll have to do the same kind of work at home get compatible (and inter compatible) parts for it.

  As I said, there is a good chance that everything will be installed and working fine... just to prepare for the unknown, when venturing off the beaten path.  If you have someone knowledgeable who can at least get you headed down a direction where there is a visibility for success, it would be useful... good luck!

• Dell PowerEdge T300 ntoskrnl.exe missing or corrupt [MS]

  Dell PowerEdge T300
  To: Win server 2003 32-bit st
  pOWEReDGE Expandable RAID Controller BIOS
  LSI 2007
  PERC 6 / i adapter
  6.0.3 - 0002 Pack FW

  It operating system starta no segnalando immediatamente di installare una copia del file ntoskrnl.exe

  Diagnostica no notes problemi hw

  It is properly Marin raid:

  1Protection drive found on the host adapter
  1 virtual drive managed by the BIOS

  Per ripristinare it Sop ho tried a con un disco di install di w2003 startare my non vede he raid e non ho a disposizione I driver (f6).

  Buongiorno,

  pilot of the it by it e perc6i controller he following:

  http://downloads.Dell.com/FOLDER97889M/10/DELL_MULTI-DEVICE_A07_R211422.exe

  Speaking saluti

  Manual

• Change a failing drive - RAID Dell Poweredge H310 - RAID 1

  Hi guys,.

  Thank you for everything that support you in these forums. I'm new here.

  We have a Dell PowerEdge T320 server on my new place of work. It is Dell Poweredge H310 RAID controller on it. It is configured in RAID-1, with 2 discs.

  Now my question is: in the event that one of the drives breaks down:

  1 - I should insert the new drive into the slot where the failed disk has been inserted, or in the following location?

  2 - will be the new drive automatically "copied" with the healthy disk data or it will need some work?

  I read the manual and chapter 'Replacement year Online physical disk', says the following, but I don't know the answer to these questions:

  1. in the management of virtual disks window, select Virtual Disk # and press the arrow key down until the physical disks is highlighted.

  2. press arrow right key to expand the list of physical disks that are members of the virtual disk.

  3. press the down arrow and select the desired physical disk that you want to replace. Press to view the list of operations permitted on the disc.

  4. Select Replace and then start.

  5. tap on the down arrow to select a replacement disk and then press the SPACEBAR to select the disk.

  6. click OK to start the replacement.

  Any advice would be appreciated.

  Kind regards.

  Videoclocknet,

  You must remove the failed disk and replace it with another similar drive on the same niche. When you choose the following location, be sure to follow the steps in the virtual disk management screen (VD) as you have indicated.

  The failed drive will be replaced and the replacement drive will be one on the following location. Either way is perfectly fine. You can then monitor status of the VD and the reconstruction process using OpenManage Server Administrator (OMSA).

  2 disks configured in RAID 1 act as a reflection of the other. Failure of 1 drive ensures that the same data are available on the other. When you replace the failed disk, the rebuilding process begins, and the same data gets automatically copied.

  Please let me know if you have any other questions.

• ESXi and Dell Poweredge T410 install issues...

  Hello, we just bought a spanking new beand Dell Poweredge T410 with S300 raid Card... useless day, Esxi 4.0 or 4.1 will not install on it... We get an error message during the installation:

  "Could not find a data device to decompress the image for.

  This server was prchased Feb 2011... can someone tell me how I can get installed on esxi?

  The S300 controller isn't a device supported for ESXi. You must add a supported RAID controller. There are many other RAID controllers available for this server. The Perc 5 and 6 controllers are also good choices and are available on sites like e - bay, etc.

• Install.VGZ fails in ESXi 4.1 install on a Dell Poweredge R710

  I have a cluster of ESXi 4.1 six-host running on Dell Poweredge R710.  They start from a USB key connected to an internal USB port.  I did at least 12-20 installs on the same hardware without problem.

  When I try to re - install on the single ISO ESXi 4.1 host via the iDRAC, the installation fails when loading install.vgz with the error message: "Booting: MBI = 0x000100c0, enter = 0x0040024a.

  I studied the two codes and the only suggestion that I get, it's that my hardware is not supported (specifically that my 32-bit processor is not supported).  I do not have a 32-bit processor, so I know that I can surrender.  I downloaded the CPU VMware ISO (file:///C:/Users/pguarco/Downloads/VMware-CPU-Compatibility-e.x.p-160658.zip) compatibility, and my CPU meets all requirements.  Previous installation of ESXi host crashed for unknown reasons, where the re - install.  It is possible, that there is a hardware problem.  Any ideas on how to limit this problem?

  you are doing the right thing. only thing I could thing is bad ISO, (Please make sure that the checksum is correct). and the worst case material PE firmware update.

• Adding additional disk to ESXi 4.1 Datastore on Dell PowerEdge R710

  Greetings,

  We currently have a Dell PowerEdge R710 with 6 SAS das drives configured in a RAID-1/RAID-5 configuration. A drive is configured as a global hot spare. I would add this spare drive in the RAID-5 table, where some virtual machines live, to recover additional space. Has someone managed to do this? Is the only way via the PERC BIOS management utility?

  Thank you!

  I'm not part "raid-1/raid-5.  But assuming that the table is raid-5, then yes it is possible and yes the BIOS utility is necessary.  The hot spare is currently set should be removed from this role, then added to the existing Bay raid-5, but without the ability to select increase.  This will create free space on the raid-5 array on which then a new logical volume can be created, which will be then seen by ESX as a new drive and therefore another data store can be added to this (or it can be added to the first as a measure).  HTH

  http://blog.peacon.co.UK

  Please give points for any helpful answer.

  Unofficial list of transfer USB devices work

• Dell PowerEdge 2900 RAID and drive down

  I have a Dell PowerEdge 2900 server. The primary transmission table has three drives and RAID 5. The system came this way, and it has been humming for quite a long time. Recently, one of the disks has deteriorated and the light on the drive flashes green and light amber. The light amber, I figured, it means that there is a problem with the drive and must be replaced. Then, I found a replacement on Amazon.com drive and installed (the drive is hot, but my cold started to be sure). I installed the drive, but keeps flashing green and amber light.

  I didn't know that I shouldn't have to replace the drive in this way, so I will now try to figure out what to do next. I hoped to reallocate the foreign disk so that I can use it, but my server always shows the reader, not having even if the new replacement drive is in the slot, now.

  I'm running PERC 5 / I integrated utility of Configuration Bios 1.04 - 019 a

  I started the server and you press CTRL-R. I've highlighted the controller and press the F2 key, what is operations. When the operations window opens, there are three menu items:

  Create new VD
  Zero Config reset
  Foreign config

  The only thing that I am allowed to do in this menu is to reset the configuration. I can't move my cursor upwards or downwards for one of the other choice of two menu.

  Scroll when the virtual disk and he discovers, it still shows the first two discs and a lack.

  When I press CTRL + N to display the next screen, I see a player listed as failed.

  How can I rebuild my RAID with this new drive? If I can't do it, what is the best way to remove the RAID and start over? If I delete the RAID and do it again (and if my replacement drive is indeed well), how can I make sure that my server not to see it, not having so that I can start using it?

  Alternating flashing green/orange means that the disc is in a status of predictive failure. What OS is running system? If you hotswap drive next failure they may possibly other issues table because the drive was online and participating in the table with errors on the disk. The adequate alternative method is to use our software Openmanage Server Administrator to run a consistency check on the table and then the drive offline. Once this has been done you can then swap the drive. It seems that in your case, that the new drive had bad data copied on it and it made a predictive failure as well. We want to do is run our hard drive diagnostics and test drives in the system.

  http://downloads.Dell.com/FOLDER01456532M/1/Dell-onlinediags-Win32-2.30.0.70.exe

  Install and run the GUI version in the start menu. In the left pane select the PERC 5 and then in the lower right pane select quick test and then to run tests.

• Card LaCie esata PCI card on windows 2003 server Dell poweredge T410 error code 10

  Hi guys, I am trying to install a new card Lacie esata PCI card (http://www.lacie.com/products/product.htm?pid=11217) on windows server 2003 on Dell poweredge T410. Windows detects the card and install the driver, but then, it shows an error code 10 "device Can not not started. I tried the update, uninstall, reinstall, adding Lacie driver CD through the "Hardware Wizard', chaning PCI card slot by 4 to 1. But nothing has worked. So please let me know if you think that there is a fix for this solution. Thank you

  Hi Rlap,

  The question you have posted is related to Windows Server and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  Windows Server Forums: http://social.technet.Microsoft.com/forums/en/winservergen/threads

• Ventole Rumorose DELL PowerEdge 850

  Buongiorno,

  avrei need di UN preventivo relativamente all'intervento di a vostro tecnico per sostituzione del corpo che sono diventate ventole molto rumorose knew a Dell powerEdge 850 service tag 93F5F2J.

  In attesa di a vostro riscontro Patu speaking saluti

  Marco

  Buongiorno, OTS will in privato a ' manage the request email.

  Grazie

  Marco

• Ordine brain DELL POWEREDGE R720 - disco rotto

  Buonasera,

  I wanted to get one offer by the di UN SAS price disco da 7.2 krpm 1 TB 2.5 "by server of he DELL POWEREDGE R720 nostro.

  Grazie.

  Saluti,

  Buongiorno,

  Può acquistare disco it a questo link

  Accessories.euro.Dell.com/.../Category.aspx

  Marco