DELL PowerEdge R210 - riflettore guasto [CF]

Similar Questions

• U1 ESXi 4.1 install on Dell PowerEdge R210

  Have no success in installation of the ESXi 4.1 U1 on the Dell PowerEdge R210? I'm unable to install ESXi and maybe someone had some advice. The Dell server comes with a RAID1 and is under the list of VMWare HCL. There a S100 for the RAID controller. Dell recommends to break the RAID1 and install ESXi on the local drive (single). This server comes with a 500 GB drive (x 2).

  What will be the best option? I think to install the 4.1.U1 ESXi on a USB key, but had no experience this and I don't know how is it sustainable. I can count on and what size of USB do I need?

  Please advice what have you done or any recommendations on how to install the server host.

  Thank you.

  Collin

  I'd certainly install on a USB key. You will need a 1 GB or more large USB key. You can have an internal USB slot and I would like to check the documentation for your location. ESXi loads directly into RAM, and he has very little written on the disc. A copy of the small configuration happens once per hour.

  I don't think that your RAID controller can be used as RAID because I think it's a software RAID that is not supported under ESX (i). You will end up with two separate drives.

• Failure installing ESXi 5.1.0 on Dell PowerEdge R210 II

  Hi all

  I tried to find my answer in the existing forums and found a similar mistake (Forum #423438), but he had put end to saying that particular server is not supported. I bought the different server, the PE210 II, and he showed up on the list of support for VMWare. If you need of advice please.

  It is a new server out of the box, bought without Windows/Linux installed. Get the installation to the point below where it was looking to select a drive... and he just stood there. When I hit F1 for more details, I got the text at the top left of the screenshot. "An unexpected error has occurred. Error code: YMxvZy5we... "Look at the logs for more details. AttributeError: 'Text' object has no attribute 'device'

  

  No idea how to go beyond this? Really, we want to start using VMware and bought equipment to devote to it. Now I can't make it work.

  Thanks in advance for any help you can provide.

  Scott

  Unfortunately "S" PERC controllers don't are not supported with ESXi, it may not even be detected during installation at all (see KB VMware: cannot install ESX/ESXi with Dell S class PERC)

  André

• PROBLEMI WINDOWS SERVER 2012 R2 SU SERVER DELL PowerEdge R210 II PUMPS

  Ho downloaded the Immagine ISO della versione di prova dal portale di microsoft di Windows Server R2 2012, accendo it server accedo went fruit F10 by prima cosa ho tried a rates come sorgente CD my it sistema mi international it following message "do not find the catalog file. Make sure that the catalog Windows (R) and Dell (TM) update packages for Windows (R) are userd' o tentanto Reed selezionando FTP my it sistema mi international it following message "updates that you are trying to apply are not up-to-date approved from Dell.

  Potete darmi directions in merito. Grazie

  Buongiorno, io ho asked su information come procedere... No ho asked UN preventivo di spesa

• Dell poweredge R210 II BMC communication failure

  Hello

  I installed a new card 6 IDRAC and during startup, I got this error message from BMC communication

  and I do not have access to the IDRAC utility.

  Thanks in advance for your help.

  Sohann,

  Looks like you installed and map iDRAC6 Enterprise without iDrac Express being installed. When upgrading a system to the Baseboard Management Controller to controller of iDRAC6 Enterprise, an iDRAC6 Express controller must also be installed for iDRAC business controller features.  This is because most of the logic for the iDrac lies in fact in the Express.

  Also, what is the part number for the company card you have installed, so I can confirm compatibility. I ask as I have only to use with the business you already have, as well as a reference number for the complete upgrade of BMC Enterprise, the numbers for the Express card. This is where the card you have is not compatible.

  iDrac6 Express only (for upgrade BMC to Express) - 330-5946

  If you card is not compatible.

  iDrac Enterprise Upgrade Kit (for upgrading BMC until the company - 330-7645

  Let me know.

• Setting up raid 1 on dell poweredge r210 ii

  Hi all

  I want to configure raid 1 with 2 x 500 GB sata HDD, I tried pressing f10 when the thumb to the Configuration Wizard of server load when I press on the raid configuration, I got error no. controllers Raid found! ..

  any help please

  Thanks in advance,

  Mandoesam,

  The first thing I would look at is if the Raid is turned on in the BIOS (F2). Access the BIOS, and then under SATA settings, replace the SATA Embedded Raid Mode. You can also turn off the server and reconnect both ends of the HDD cables. After that, then start the cycle of life of the controller (F10) and see if the Raid is now configurable.

  Let me know how it goes.

• Request preventivo motherboard for PowerEdge R210 [CF]

  Buongiorno,

  Abbiamo need di UN preventivo per sostituzione card mother relative al PC Dell PowerEdge R210 fuori co serial number 1LVCX4J.

  Restiamo in attesa di una vs cortese risposta.

  Todas

  Davide Paltretti

  Distelco s.r.l..

  Buongiorno, the sto contattando by mail.

• Cannot update firmware Poweredge R210 II

  Hello

  I get messages and errors below when you try to update the firmware on my server Poweredge R210 II. I use the BIOS of the Dell PowerEdge R210 II Version 2.8.0 server that seems to be the most recent version of this BIOS, but receive the following messages:

  * Red * please do not remove his power!

  Utility of flashing Insyde etc.

  100% of file loading

  Model name of the current BIOS:

  New model of the BIOS name: PowerEdge T110 II

  * Red * cannot use a BIOS "PowerEdge T110 II".

  * Red * in a «»

  * Red * Rom update not done

  etc.

  I saw the post following for the server in the subject line that has the same message above and points located on the server is an OEM box, but I'm able to open a support on the dell.com site page using the number of service on my machine. Any suggestions? Here is the message:

  http://en.community.Dell.com/support-forums/servers/f/956/t/19429285.aspx

  I managed to Flash the BIOS on my Dell R210 II XL OEMR back to the standard BIOS Dell Server version 2.8.0 by creating a BACK USB startup disk, copy the unpackaged Dell BIOS file, in my case, I used PER210II_020800.exe, and then running the following command: "PER210II_020800.exe - wipeclean - forcetype.

  The switch - wipeclean clears the ESCD and DMI data tables and the forces of switch - forcetype BIOS file to install on any Dell server.

  Here is a list of the other switches used during the update of the BIOS.  Be careful, however, you easily could brick your server if you use these incorrectly.

  mickitblog.blogspot.com/.../Dell-BIOS-switches.html

• Request price diretto FAN by server PowerEdge R210 II

  Buongiorno,

  Abbiamo indivuato UN guasto due ventole del Server PowerEdge R210 II (service tag: 7K556X1) da noi injected.

  Richiediamo one ' offer by the price di n.2 ventole by suddetto server there.

  5s a gentile riscontro vostro.

  Saluti

  Buongiorno, the sto contattando by mail.

• Request assistenza su Server PowerEdge R210 [MS]

  Salve,

  Ho sostituito UN guasto disco PowerEdge R210 just del mio server, Ho awarded come da aid all'array my it sistema e due giorni su fermo 'REBUILDING 0%.

  Ho need di risolvere questo problema quanto prima perch he virtuale disco pulito degradato.

  In attesa di UN gentile riscontro buona day hope vi
  .

  Buongiorno,

  get bios dal optimal controller array e del, cosi e! Ogni monitoring software di non fa altro che requested the info required al controller stesso per cui più e sempre controller bios del overall melting it.

  Speaking saluti

  Manual

• [EC | ex-MS |] Solved] RIPARAZIONE FUORI CO POWEREDGE R210

  Buongiorno,

  Abbiamo need di UN preventivo per UN POWEREDGE R210.

  The macchina e fuori co.

  I have a problemi riscontrati sono:

  -Ventole sempre accese

  -Al boot so i seguenti if mi

  System Service disabled

  BMC Communication failure

  SERVICE TAG

  Come we can procedere?

  Buongiorno,

  Visto error riportato "Bmc Communication Failure" non e possibile aggiornare bmc which even comanda Reed it system service the ventole, is replace the motherboard.

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione/operation:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Power supply by DELL PowerEdge 2900 [MS]

  Buongiorno,

  sewn da parte di STUDIO_C, a ' azienda rivenditrice di materiale informatico.

  Avrei need di una quotazione by server UN ad add una seconda PSU Dell Poweredge 2900 dqstayn:

  Grazie.

  Offerta inviata: Offerta Dell n ° client 15487734: IT2881869 - STUDIO_C DI MARIANNA FABRI

  * Offerta offers great al successivo giorno lavorativo (eccetto che in caso di problemi di reperimento parte) con retreat posticipato del guasto *.

  Speaking saluti

  Manual

• Card LaCie esata PCI card on windows 2003 server Dell poweredge T410 error code 10

  Hi guys, I am trying to install a new card Lacie esata PCI card (http://www.lacie.com/products/product.htm?pid=11217) on windows server 2003 on Dell poweredge T410. Windows detects the card and install the driver, but then, it shows an error code 10 "device Can not not started. I tried the update, uninstall, reinstall, adding Lacie driver CD through the "Hardware Wizard', chaning PCI card slot by 4 to 1. But nothing has worked. So please let me know if you think that there is a fix for this solution. Thank you

  Hi Rlap,

  The question you have posted is related to Windows Server and would be better suited to the TechNet Discussion groups. Please visit the link below to find a community that will provide the support you want.

  Windows Server Forums: http://social.technet.Microsoft.com/forums/en/winservergen/threads

• Ventole Rumorose DELL PowerEdge 850

  Buongiorno,

  avrei need di UN preventivo relativamente all'intervento di a vostro tecnico per sostituzione del corpo che sono diventate ventole molto rumorose knew a Dell powerEdge 850 service tag 93F5F2J.

  In attesa di a vostro riscontro Patu speaking saluti

  Marco

  Buongiorno, OTS will in privato a ' manage the request email.

  Grazie

  Marco

• Ordine brain DELL POWEREDGE R720 - disco rotto

  Buonasera,

  I wanted to get one offer by the di UN SAS price disco da 7.2 krpm 1 TB 2.5 "by server of he DELL POWEREDGE R720 nostro.

  Grazie.

  Saluti,

  Buongiorno,

  Può acquistare disco it a questo link

  Accessories.euro.Dell.com/.../Category.aspx

  Marco