Username disappear when connecting with check user credentials

Similar Questions

• PREVENT CONNECTION WITH THE SAME CREDENTIALS

  I developed an application. I gave 5 business users access, but more users are using it in connection with the same user name and password. I use custom authetication based on apex.
  
  Is it possible to prevent two simultaneous connection with the same credentials.
  
  Thank you
  
  Umesh

  A suggestion, it is NOT perfect...

  You must use custom authentication... In this configuration, you add a column to the table with user names, call it online and use a car1. When the user connects and you check their authentication, if it passes, you update the table with a 'Y' in the line with their ID card.

  When they log out, you're going to run a process to update at the same table, replacing the 'Y' by "n" or null...

  So when a user connects, you will also verify their line use an if the column is set to 'Y', then your custom authentication MUST return the error that this connection is already recorded...

  Thank you

  Tony Miller
  Webster, TX

  Follow your passion; the rest will take care of itself.

  JMS

  If you answer this question, please mark the thread as closed and give points where won...

• Failed to connect with the user name "Administrator".

  Hello

  I want to configure vCD in VCO, but I am faced with error. I'm by train through the configuration of the vCO.

  I get the error message https://10.99.133.212:443 , Failed to connect with the user name "Administrator". And the description of the error is: "the API version information could not be obtained for the host https://10.99.133.212:443 () (administrator@System)!'."

  Here are the entries I provide:

  Host: 10.99.133.212

  Organization: System

  Authentication: basic

  Session: shared

  and name of user and password.

  What could be the error here? My vCO has IP 10.99.129.33. And I imported the vCD also SSL certificate.

  Kind regards

  Bethy

  You must first remove the new plug-in...

  VMware KB: Uninstall a plug-in for VMware vCenter Orchestrator

  Remember that you use step 6.3 in this article to delete the contents of the package as well. To verify that the workflow and actions have been removed, check that the following workflow category (and all children of it) no longer exist:

  / Library/vCloud Director

  And all related Action modules should have disappeared as well:

  com.vmware.library.vCloud. *.

  Once you have completed all steps of the KB, install version 5.1 of the plugin, configure and restart the vCenter Orchestrator Server service, once again to complete the installation.

• I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials.

  I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials (example below):

  Your MC ID: xxxxxxx

  Your temporary access code: 18995EBE-BDAF-4883-8F95-64D18D261848

  I created a new account with the e-mail MC ID has been sent and it was not recognized.  I would like to merge (link) the news and be able to get a fresh copy of my cert.  Thank you.

  Hello

  I suggest you contact Microsoft Learning support team to improve assistance:

  http://www.Microsoft.com/learning/en/us/help/assisted-support.aspx

• error when connecting with SmartConnection inCopy

  Hello world

  I had to install Adobe inCopy for Clients in my workplace. After installing it, I use a SmartConnection and an installer of fix to this issue. She successfully for almost all customers except one, I still get the error when connecting with the SmartConnection. When I open the event logs, he said that it is related to public.dll plugin.

  I was installing it again and again and it's always the same error that pop up.

  The customer is a 64-bit Windows 7.

  

  Some help would be welcome.

  Best regards

  Problem solved

• Hide the username / password when connecting to the database

  I need to find a way to hide the user name / password when connecting to the database (via a script), or by encryption or any other method that hides this information when I connect to the database.

  I use Oracle 11 g.

  I tried with the portfolio method, but could not connect to the database of the error below, even the user name and password:

  ERROR:

  ORA-01017: invalid username / password; connection refused

  I plugged this way (after the cover configuration):

  sqlplus /@DB

  Please help me.

  Concerning

  Luiza

  Hi Luiza,

  Try to find out why the portfolio method does not work, check the implementation using ref 340559.1 Note

  Check also for example client and server versions / compatibility, evolves sec_case_sensitive_logon relevant parameter (as a test, because it must be true) etc.

  Greetings,

  Damage ten Monkshood

• Limitation of connection with the same credentials of AD to EHT

  Hi all

  I want that if a client has a successful login - started session in the company with access to its network domain account, it cannot connect to the network with the same domain to another account at the same time.

  I have to try to prevent the connection several successful sessions simultaneously with the same credentials of domain of different devices.

  Thank you

  Hello

  I have already spoken here, and also with local Cisco SE and for the moment, the ISE does not have a mechanism to limit the number of sessions per user name, this feature is only available for guest users.

  In addition, we have a work around for this on Cisco WLC (wireless) since the WLC has a feature to limit the number of sessions per user name, and also you can limit the number of sessions on the SAA for VPN access.

  There is no work around to access switches, so you need to make a policy on the AD domain / itself, if necessary.

  Thank you.

  Ahmad.

• Outlook express crashes when connecting with the mail server

  Outlook express 6 crashes when the connection with the mail server, please advise, thank you!

  Try to remove your e-mail account and then close and reopen OE and then add it back again.  Make sure that antivirus sofware interfering not - see www.oehelp.com/OETips.aspx#3

  Steve

• Error message when connecting with wireless USB modem

  Dear Sir/Madam,

  I use the HP laptop with Windows vista operating system. I'm also using the USB wireless modem. But now, I had problem connecting with usb modem. I get ((erreur (6): could not get the string) message connecting with.) Kindly help me to solve the problem.

  Thank you
  Kind regards
  D.Yokesh

  Hi D.Yokesh,

  1. did you of recent changes on the system?

  If it is a recent issue, then you can try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Pictures of blackBerry Z10 BB Z10 disappeared when connected to the PC via USB Phone model z10 STL 100-1

  Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

  ampawase wrote:
  Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?

  "A wireless connection with the mixture, use the file manager, hold Media Card - Photos - 'Shift' or ' Ctrl ' key - select thumbnails - right-click - Save slot - selecting a folder on the pc and save them.

• When connecting with DB name Error Getting

  Conn scott/tiger@Db1;
  I got error like:
  ERROR:
  ORA-12541: TNS:no listener.
  But if I write like
  
  Enter user_name: scott
  Enterr password: *.
  Connect with success.
  
  Why it happened what is the reason.
  Please give the reason
  Thank you

  Using the first case, you can access the remote database using the connect identifier specified n your tnsname.orafile

  Also the user through which you connect should be available in the remote database.

  Suppose I want to connect to a remote user scott database while the user must be present in the remote database, so only he can connect

• Error when connect with RMAN

  When I connect to RMAN, gatting this error
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00554: initialization of the package manager internal collection failed
  RMAN-04005: target database error:
  ORA-01031: insufficient privileges
  
  provide a solution to solve.

  You need to connect with SYSDBA privileges: http://download.oracle.com/docs/cd/E11882_01/backup.112/e10642/rcmquick.htm#BRADV89348

• Error in creating a Net connection with the user "sys" DBA

  I can log in as user "sys" on site, but can not
  connect as user sys as a network connection.
  
  situation #1: connect locally... no problem...
  
  [oracle@localhost ~] $ sqlplus
  
  SQL * more: Production of release 11.2.0.1.0 sam may 12 23:31:39 2012
  
  Copyright (c) 1982, 2009, Oracle. All rights reserved.
  
  Enter the user name: sys as sysdba
  Enter the password:
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  
  situation #2: network connection... "sys" error message - no sufficient privileges...
  
  SQL > connect sys@orcl as sysdba
  Enter the password:
  ERROR:
  ORA-01031: insufficient privileges
  
  situation #3: connect network as user 'system'... no problem...
  
  SQL > connect system@orcl
  Enter the password:
  Connected.

  GabyPR wrote:
  I can log in as user "sys" on site, but can not
  connect as user sys as a network connection.

  situation #1: connect locally... no problem...

  [oracle@localhost ~] $ sqlplus

  SQL * more: Production of release 11.2.0.1.0 sam may 12 23:31:39 2012

  Copyright (c) 1982, 2009, Oracle. All rights reserved.

  Enter the user name: sys as sysdba
  Enter the password:

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production

  situation #2: network connection... "sys" error message - no sufficient privileges...

  SQL > connect sys@orcl as sysdba
  Enter the password:
  ERROR:
  ORA-01031: insufficient privileges

  be GRATEFUL in this case; otherwise anyone can connect to DB from anywhere 'as sysdba'

• Error when connecting with the new announcement of account in windows 8 client as "User must change password at the next logon"

  Windows Server 2003 R2 Standard Server
  Client-side: Windows 8

  The problem:

  I create a new user and let the "user must change password at the next logon' checked. When I try to log in with the newly created user I get an error saying "User must change password at the next logon" after ptoviding the new password.

  At this point if I uncheck the "user must change password at the next logon', then the user can connect properly.

  Can someone help me. Please let me know any problem OS compatibility between the server and the OS cleint.

  Jaril

  Hi Jaril,

  Thanks for posting your query in Microsoft Community.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  Hope this information is useful.

• Difficulty accessing 1 remote desktop when connected with VPN

  Hello world

  I have an ASA 5505 and have a problem where when I connect via VPN, I can RDP into a server using its internal address but I can't RDP to another server using its internal address.

  One that I can connect to a an IP of 192.168.2.10 and I can't connect to a a 192.168.2.11 on 3390 port IP address.

  The two rules are configured exactly the same except for the IP addresses and I can't see why I can't connect to this server.

  I am also able to connect to my camera system with an IP on port 37777 192.168.2.25 and able to ping any other device on the network internal.

  I also tried ping he and Telnet to port 3390 without success.

  Here is the config.

  ASA 4,0000 Version 1

  !

  !

  interface Ethernet0/0

  switchport access vlan 3

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  switchport access vlan 2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan2

  nameif inside

  security-level 100

  IP 192.168.2.2 255.255.255.0

  !

  interface Vlan3

  nameif outside

  security-level 0

  10.1.1.1 IP address 255.255.255.0

  !

  passive FTP mode

  clock timezone IS - 5

  clock to summer time EDT recurring

  network obj_any object

  subnet 0.0.0.0 0.0.0.0

  network of the OWTS-LAN-OUT object

  10.1.1.10 range 10.1.1.49

  network of the OWTS-LAN-IN object

  Subnet 192.168.2.0 255.255.255.0

  service of the RDP3389 object

  service destination tcp 3389 eq

  Description of DC

  the object SERVER-IN network

  host 192.168.2.10

  network of the SERVER-OUT object

  Home 10.1.1.50

  network of the CAMERA-IN-TCP object

  Home 192.168.2.25

  network of the CAMERA-OUT object

  Home 10.1.1.51

  service object CAMERA-TCP

  Service tcp destination eq 37777

  the object SERVER-Virt-IN network

  Home 192.168.2.11

  network of the SERVER-Virt-OUT object

  Home 10.1.1.52

  service of the RDP3390 object

  Service tcp destination eq 3390

  Description of VS for Master

  network of the CAMERA-IN-UDP object

  Home 192.168.2.25

  service object CAMERA-UDP

  Service udp destination eq 37778

  the object OWTS LAN OUT VPN network

  subnet 10.1.1.128 255.255.255.128

  the object SERVER-Virt-IN-VPN network

  Home 192.168.2.11

  the object SERVER-IN-VPN network

  host 192.168.2.10

  the object CAMERA-IN-VPN network

  Home 192.168.2.25

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  AnyConnect_Client_Local_Print deny ip extended access list a whole

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd

  Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631

  print the access-list AnyConnect_Client_Local_Print Note Windows port

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100

  access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353

  AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol

  AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355

  Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print

  AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137

  AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns

  implicit rule of access-list inside1_access_in Note: allow all traffic to less secure networks

  inside1_access_in of access allowed any ip an extended list

  outside_access_in list extended access allowed object RDP3389 any host 192.168.2.10

  outside_access_in list extended access allowed object RDP3390 any host 192.168.2.11

  outside_access_in list extended access allowed object CAMERA TCP any host 192.168.2.25

  outside_access_in list extended access allowed object CAMERA UDP any host 192.168.2.25

  pager lines 24

  Enable logging

  exploitation forest-size of the buffer 10240

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  local pool RAVPN 10.1.1.129 - 10.1.1.254 255.255.255.128 IP mask

  no failover

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT static destination SERVER-IN-VPN SERVER-IN-VPN (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN

  NAT static destination of CAMERA-IN-VPN VPN-IN-CAMERA (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN

  NAT static destination of SERVER Virt-IN-VPN-SERVER-Virt-IN-VPN (indoor, outdoor) static source OWTS LAN OUT VPN OWTS-LAN-OUT-VPN

  !

  network of the OWTS-LAN-IN object

  NAT dynamic interface (indoor, outdoor)

  the object SERVER-IN network

  NAT (inside, outside) Shared SERVER-OUT service tcp 3389 3389

  network of the CAMERA-IN-TCP object

  NAT (inside, outside) static CAMERA-OFF 37777 37777 tcp service

  the object SERVER-Virt-IN network

  NAT (inside, outside) Shared SERVER-Virt-OUT 3390 3390 tcp service

  inside1_access_in access to the interface inside group

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 10.1.1.2 1

  Timeout xlate 03:00

  Pat-xlate timeout 0:00:30

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  identity of the user by default-domain LOCAL

  Enable http server

  http 192.168.2.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP

  DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  Terminal registration

  name of the object CN = SACTSGRO

  Configure CRL

  Crypto ikev1 allow outside

  IKEv1 crypto policy 10

  authentication crack

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 20

  authentication rsa - sig

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 40

  authentication crack

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 50

  authentication rsa - sig

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 60

  preshared authentication

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 70

  authentication crack

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 80

  authentication rsa - sig

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 100

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 110

  authentication rsa - sig

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 120

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 130

  authentication crack

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 140

  authentication rsa - sig

  the Encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 150

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  Telnet 192.168.2.0 255.255.255.0 inside

  Telnet timeout 15

  SSH 192.168.2.0 255.255.255.0 inside

  SSH timeout 5

  SSH version 2

  SSH group dh-Group1-sha1 key exchange

  Console timeout 15

  dhcpd auto_config inside

  !

  a basic threat threat detection

  statistical threat detection port

  Statistical threat detection Protocol

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  username admin privilege 15 xxxxx encrypted password

  attributes of user admin name

  VPN-group-policy DfltGrpPolicy

  type tunnel-group CTSGRA remote access

  attributes global-tunnel-group CTSGRA

  address RAVPN pool

  IPSec-attributes tunnel-group CTSGRA

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:0140431e7642742a856e91246356e6a2

  : end

  Thanks for your help

  Ok

  So, basically, you set up the router so that you can directly connect to the ASA using the Cisco VPN Client. And also, the goal was ultimately only allow traffic to the LAN through the VPN Client ONLY connection.

  It seems to me to realize that you have only the following configurations of NAT

  VPN Client NAT0 / free of NAT / identity NAT

  the object of the LAN network

  Subnet 192.168.2.0 255.255.255.0

  network of the VPN-POOL object

  subnet 10.1.1.128 255.255.255.128

  NAT static destination LAN LAN (indoor, outdoor) static source VPN-VPN-POOL

  The NAT configuration above is simply to tell the ASA who don't do any type of NAT when there is traffic between the network 192.168.2.0/24 LAN and VPN 10.1.1.128/25 pool. That way if you have additional hosts on the local network that needs to be connected to, you won't have to do any form of changes to the NAT configurations for customer VPN users. You simply to allow connections in the ACL list (explained further below)

  Failure to PAT

  object-group network by DEFAULT-PAT-SOURCE

  object-network 192.168.2.0 255.255.255.0

  NAT automatic interface after (indoor, outdoor) dynamic source by DEFAULT-PAT-SOURCE

  This configuration is intended just to replace the previous rule of PAT dynamic on the SAA. I guess that your router will do the translation of the ASA "outside" IP address of the interface to the public IP address of routers and this configuration should allow normal use of the Internet from the local network.

  I suggest you remove all other NAT configurations, before adding these.

  Control of the VPN clients access to internal resources

  Also, I assume that your current VPN client is configured as full Tunnel. In other words, it will tunnel all traffic to the VPN connection, so that its assets?

  To control traffic from the VPN Client users, I would suggest that you do the following

  • Set up "no sysopt permit vpn connection"
    • This will change the ASA operation so that connections through a VPN connection NOT allowed by default in order to bypass the ACL 'outside' interface. So, after this change, you can allow connections you need in the 'outer' interface ACL.
  • Configure rules you need for connections from VPN clients to the "external" ACL interface. Although I guess they already exist as you connect there without the VPN also

  I can't say this with 100% certainty, but it seems to me that the things above, you should get to the point where you can access internal resources ONLY after when you have connected to the ASA via the connection of the VPN client. Naturally take precautions like backups of configuration if you want to major configuration changes. If you manage remotely the ASA then you also also have the ability to configure a timer on the SAA, whereupon it recharges automatically. This could help in situations where a missconfiguration breaks you management connection and you don't have another way to connect remotely. Then the ASA would simply restart after that timer missed and also restart with the original configuration (as long as you did not record anything between the two)

  Why you use a different port for the other devices RDP connection? I can understand it if its use through the Internet, but if the RDP connection would be used by the VPN Client only so I don't think that it is not necessary to manipulate the default port 3389 on the server or on the SAA.

  Also of course if there is something on the side of real server preventing these connections then these configuration changes may not help at all.

  Let me know if I understood something wrong

  -Jouni