Dell XPS 13 2015 and update of Samsung 950 PRO m2

Similar Questions

• Alienware X 51 R3 upgrade HDD Samsung 950 Pro - 512GB

  I got cloned and installed the Samsung 950 PRO. I can boot windows 10 on the Samsung drive when the HARD drive is not connected. When I try to re - install the drive HARD original system returns to this drive during startup and boots into windows 10. The boot priority is set to the default values, something like this:

  Network

  CD ROM

  USB KEY

  Hard drive HDD1

  I'm guessing that their must be original tosh 1 TB HDD1 and new Samsung car and I just need to point to the right pair where the HDD1 drive is on the priority list? Any help would be greatly appreciated.

  HolyCow99

  Are you in UEFI or Legacy mode to start?

  If you have an external USB enclosure, best thing to do is to clear the disc rotation while it is booted from the SSD.

• HP ENVY 15-j142na: HP ENVY 15-j142na Samsung 950 PRO NVMe m2 update?

  Support HP ENVY 15-j142na Samsung 950 PRO NVMe m2 dose?

  Negative results. There a WSSD but it is the older form factor, not m2 and even the old player of WSSD type may not be bootable is a cache acceleration only.

• Cannot install Windows 10 on T460s with Samsung 950 PRO NVMe M.2 SSD

  I can't install Windows 10 on my T460s brand new. It was delivered with Windows 7.

  1. The original Windows 7 starts fine
  2. I started the installer of Windows 10 bootable USB
  3. I deleted all the partitions on the system and then tried to create a new
  4. The error message is displayed:

  Windows cannot be installed on this drive (show details)

  Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the drive controller is enabled in the BIOS menu.

  SSD: Samsung 950 Pro NVMe M.2 SSD, MZ-VKV512

  BIOS Lenovo: 1.11

  Windows ISO 10: en_windows_10_n_multiple_editions_version_1511_updated_apr_2016_x64_dvd_8710592.iso

  Check in the BIOS, UEFI boot is selected for the startup to STARTUP tab.

  You must also reset the configuration of the disk on the 950.

  1. start the Windows 10 ISO

  2. launch the command prompt (Admin)

  3. type Diskpart

  4 locate the SSD in the volumes

  5. type Diskpart/select volume # (SSD)

  6. type Diskpart / clean

  Output

  Start the Windows 10 ISO

  Installing Windows 10 should now work.

• M.2 SSD in X 51 R3 - Samsung 950 Pro? -Need help

  RE: X 51 R3 - Samsung 950 Pro

  Alienware 51 R3 x I and when I was installing my SSD, I saw the port of m2. I ordered a Samsung 950 Pro, installed, but nothing.

  The computer does not start. I get the white screen with the blinking cursor.

  Repair CD / USB do not work.

  When I remove the m2, the computer boots fine with my SSD hooked using Sata ports.

  I heard that there is an SSD of M.2 PM951 m2 stock.

  Does this mean that the Samsung 950 Pro does not work?

  Nope - SATA III is still slower than 2xPCIe 3.0 lanes.

  The Samsung 850 m2 will probably reach around 520-550 MB/s Seq reading due to the limitations of the record Protocol and SATA port. You can see that I'm reading Seq 1500 + Mbps even with only two active channels. The 950 NVMe Pro is able to 2500 MB/s speed with 4-way active reading.

  The only place where having 4 lanes from 2 lanes for NVMe Pro 950 issues is in sequential read speed. The write speeds and Random access doesn't seem to be limited given that the max drive speed doesn't seem to go beyond the bandwidth of 2-way.

• Alienware 17 R3 with Samsung 950 Pro

  After receiving my new Alienware, I decided to install a Samsung 950 Pro. After a lot of sweat, blood and tears and TONS of frustration, I was able to get 10 Windows installed as well as most of my games. I felt he was finally sure to re - install the HARD disk supplied with the notebook 1 TB.

  Boy I was wrong, he refuses to detect the PRO 950 and refused to start at all. I have the 1 TB back out, just so that I could start again under the windows installed on the Pro 950. And before you say anything yes I disable the startup of windows for the 1 TB option in the Bios.

  Hello

  Engineering investigated the compatibility of this SSD is apparently not compatible with this model, so will cause this type of erorres, among others.

  Here is the list of SSD M2 readers compatible with 15R2, 17R3 and Aurora R5:

  SSD 1 TB Hynix PC300 PCIe NVMe 2280

  M.2 SSD 2280 X SANDISK 400 512 G

  SSD 256G Samsung PM951 PCIe NVMe 2280

  LITEON CV3 128G M2 2280 SSD

  SSD 512G Samsung PM951 PCIe NVMe 2280

  HYNIX 256G M2 2280 SSD SC308

  M.2 SSD 2280 X SANDISK 400 128 G

  SSD 256G Toshiba XG3n PCIe NVMe 2280

  SSD 256 Hynix PC305 PCIe NVMe 2280 G

  HYNIX 128G M2 2280 SSD SC308

  M.2 SSD 2280 X SANDISK 400 256 G

  SSD 512G LiteOn CX2 PCIe NVMe 2280

  HYNIX SC308 512G SSD 2280 M2

  SSD 512 Hynix PC300 PCIe NVMe 2280 G

  SSD 1 TB LiteOn CX2 PCIe NVMe 2280

  SSD 1 TB Samsung PM951 PCIe NVMe 2280

  LITEON CV3 512G SSD 2280 M2

  SSD 512G Toshiba XG3n PCIe NVMe 2280

  SSD 1 TB Toshiba XG3n PCIe NVMe 2280

  256G LiteOn CX2 NVMe 2280 PCIe SSD

  LITEON CV3 256G M2 2280 SSD

• Dell XPS 18 overheats and stops

  Hi guys. I have a Dell xps 18 who has recently developed a problem. With or without overloading the processor temperature starts randomly on the rise and the machine stops at about 57 to 62 degrees. Sometimes it's very good and sometimes it keeps it doing back to back. My computer has the replacement motherboard i3. The original has stopped charging the battery (plugged in, not not supported message) so I bought a motherboard replaced about 8 months ago. It has good cpu paste and everything worked fine until recently. Even he stops when it is in the BIOS. I was wondering, is it than 60 degrees is a dangerous temperature that is forcing the closure of the motherboard? The idle temp is about 30 to 40 degrees, then it suddenly starts to go up until 60, then dies. He does especially when is overload (no game, some software open), but still it goes up sometimes when he's just sitting there with nothing running in the background. I have to go on eBay new fan buy my second replacement card mother now lol? Any suggestion? I like my XPS 18 and it has served me well but have these serious problem began to really put me off it. Thank you very much.

  just an update on my problem with heat. the card mother ew (i3 US$ 50) arrived and installed a few weeks, I have been using and test the DEll XPS 18 heavily for the past few weeks without any problem so far. the operating temperature is 49 c (use slow and light) to 60 ° c (very busy) but now the motherboard stop no more. I also decided to use an additional quantity of thermal paste and I think the fan is working a lot quieter and less now. My problem was a faulty motherboard and then at the end second MB less than a year. I wonder when I will return here and announce that I am ready for a third replacement card mother lol

• Resolution issues of image (redirect) on my new DELL XPS 13 (2015)

  I just bought my new DELL XPS 13 inch 2015 model Corei7, touch screen version.  As soon as I came to explore, I noticed that the fonts are super sharp and high resolution, which is great, however, images/logos of websites such as facebook, cnet, and many others is a bit blurry and pixelated. Why is this the case? I have a pro apple mac book and all the images load perfectly here.

  What could be the problem and is it possible that I can find a solution or this?

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• XPS 8900 and Samsung 950 PRO Boot sequence problem

  I have a 8900 XPS with Windows 10. I have a Samsung NVMe 950 PRO SSD installed using a x 4 PCIe3.0 NIC - to-M.2 installed in PCIe SLOT on the XPS 8900 motherboard 3. I used Samsung cloning software to clone the OEM 1 TB HDD (immediately after you set up Windows 10 on it) for Samsung NVMe 950 PRO SSDS. Then I used the Samsung Software Wizard to install all the latest drivers.

  The only way I am able to boot from the SSD PRO 950 is to detach the HARD drive (which invites a Code of error Dell # 2000-0141 or something like that... no disc HARD detected). Seeing the Dell error at startup screen, I click on 'Continue' and Windows 10 boots perfectly fine (and very, very quickly). I just used my PC this way for a few weeks now. However, I really want to take advantage of the disk of 1 TB of extra storage space.

  When I plug the HARD drive and reboot, Windows 10 is loaded from disk (not the SSD) and I don't get the Dell 2000-0141 error screen. I pressed F2 or F12 at the Dell splash screen to go into BIOS to change the boot sequence, but I don't see that the SSD listed as a 'disc' or the source file for the start of Windows 10 controls... Shut down the PC, unplug the HARD drive and starting up, I get the Dell screen #2000-0141 again error (without HDD detected), click on 'Continue' and Windows 10, even once, start up normally on the SSD.

  Is it possible that I can use the drive HARD without the PC automatically boot from the HARD drive?

  Thank you!

  -Tyler

  First you need to download the latest driver of Samsung 950 NVMe (this is not included and is required) to you

  OEM HARD drive, then clone the drive.

  its about half way down the page.

  

  

  Then see if you can find it in the BIOS, I pulled out my HARD drive and its in the pile of gift, all SSD for my system. I'm sure that you can remove the secure boot and startup of the PCIe SSD.

  Please report your findings

• DELL XPS 8700 compatible with the monitor Samsung Syncmaster 2232 office

  HI - can anyone confirm that the DELL XPS 8700 desktop computer is compatible with the monitor Samsung Syncmaster 2232.

  Already, I have the monitor, but need a new processor unit.

  Thank you...

  Hi yydelilah,

  The monitor has VGA and DVI ports.

  By default, XPS 8700 comes with HDMI and display port.  If the system is configured with a discrete card, and this card has DVI/VGA port, you will be able to connect to this monitor.

• My laptop Dell XPS 17 (L702x) does not recognize an SSD pro Samsung 840

  Hello

  I buy all my first SSD for my laptop Dell XPS 17 (L702x) (8T7CQS1). I managed to install the Samsung 840 pro (MZ-7PD256BW) at the HARD School of XPS drive, but the BIOS does not detect as a second HARD drive.

  My BIOS version is the most recent: A19 (26/10/2012), I tried to load the BIOS default settings, but no change.

  The SATA in the BIOS mode is AHCI.

  What could I do with them?

  Thanks, if you can help me,

  Kris

  Hi Kris,

  Traction test drive 1 and put the SSD in this slot. Then boot in the BIOS to see if the drive is detected.

• Dell XPS 13 2015

  What happened to the Dell XPS 13, 2013 Core i5-5200U, 128 GB SSD, 8 GB of Ram, not 1920 x 1080 Full HD touchscreen? Why he was pulled off the shelves?

  Hi sinner_93,

  Periodic changes of Dell and pc upgrade. This is what is available at this time.

  http://pilot.search.Dell.com/XPS%2013

• I have a dell xps with vista and get the error "unable to start windows.

  I can then choose the launch startup repair or start windows normally.  as soon as I clicked launch startup repair, he says that it is not able to PC repair.  I tried to enter safe mode, it restarts, flashes a blue screen and takes me to start the reboot system again.  I tried to run a recovery from a previous version of my sw windows (via the options in advance in the Startup Repair menu), but this does not solve the problem of boot loop.  I can get to a c prompt, but that's all.  I prefer not to use the dell factory image restore and losing all my files.

  today

  Run dell diagnostics

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_A9E3A15597A04AFBB02EE16785D39C5C&isLegacy=true

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

• Dell XPS 8100 PSU and GPU updates

  So heads up, I've never updated a computer in this way before. I opened the box a few times to clean the old GPU and replace the old with the new GTX 260 240 when I got it, but beyond that nothing. I know that I need to upgrade my GPU, fortunately, my best friend gave me a GTX 750 Ti 2048 MB PCIe graphic card and I wonder if I could install in my XPS 8100 and already use it. I was told that in the Dell 350W POWER supply is sufficient to run it, but I'm not sure and would like to double check.

  However, should I I need a new power supply, I was told that SeaSonic S12II 520 Bronze 520W ATX12V V2.3 / EPS 12V V2.91 80 PLUS BRONZE certified Active PFC power supply PSU will fit the Dell case but here a double confirmation directly from Dell forums - especially after a call with Dell technical support told me that there is no way to upgrade the PSU. There is also the modular version M12II, but it seems that the dimensions on this would mean that he did not fit into the XPS 8100?

  Ruinus

  The GTX 750 Ti 2048 MB PCIe graphics card should work fine with the default power of XPS 8100.

  Bev.

• Dell xps 13 2015, flat and dull audio quality of the headphone

  Hello!

  Everyone knows that the quality of the sound with headphones is very flat and bad? I have no response in the bass at all. The programe of MAXX 3 does nothing that improves the real audio output. Support told me that everything goes well with my system, only that it is like that. Electronic music is unbearable. There is nothing wrong hardware wise with my headphone jack is just the missing frequencies that drive me crazy.

  Hi Martin.

  Just brought portable 9343 and facing same issue on the new installed Windows 10 Insider Preview. His helmet is low compared to my other devices (laptop HP, Tablet Google Nexus 7). Bass is VERY thin... Looks like a cheap helmet.

  Can't say about the sound in Windows 8.1 (out of the box), because I wasn't listening sound on preinstalled system.

  I spent about 5 hours to solve this problem and found a possible workaround. Try it, maybe it will work for you also.

  1. official audio driver download: URL

  2. extract this file to a folder. Install the drivers, reboot the system. After installation delete extracted folder.

  3. find the "Intel (r) Smart Sound Technology (Intel (r) OSH)" Device Manager system devices.

  

  4. click on 'Update Driver' on the driver tab.

  

  5. click on "Browse my computer for driver software".

  6. in the next screen, click on "Let Me pick from a list of devices on my computer.

  7. click the 'Have disk' button and navigate to the folder extracted in step 2.

  9343_Audio_Driver_X22K2_WN32_7422.118.0_A01\RealtekAudio\RealtekI2SAudio\Fre\Isst

  8 select the file 'IntcADSPDELL.ini '. Click on open, OK.

  9. uncheck the "Show compatible hardware", select 2nd device and install it (click 'YES' on the caveat).

  

  10. after the installation, open the Manager Realtek HD tray and TURN OFF MaxxAudio3.

  

  That's all.

  After this step, I have same sound as on my other devices. Without * MaxxAudio improvements.

  Good luck!