My laptop Dell XPS 17 (L702x) does not recognize an SSD pro Samsung 840

Similar Questions

• Dell XPS 13 (L322X) does not recognize Dell U2713HM

  Trying to connect my new laptop / monitor - but my toys will not play with me. Have connected each via supplied usb cables (most mini dp - DVI adapter + dvi cable). Received the error on usb install re failure / unknown device? When running Dell display manager error I get following:
  «This program requires a Dell monitor and driver support compatible display.»  If you think that your system meets these requirements, try power cycling the monitor and/or update the display driver. »
  I downloaded the drivers from the dell site, but when run Setup it does not recognize the monitor and thus used to install drivers
  -little a catch 22?  do I need or there at - there a way to force the installation of the driver? Assumed that these devices are compatible and if yes, can I someone help me?

  Thank you very much!

  -Craig.O

  

  It seems that the problem is with your "mini dp - DVI adapter + dvi cable. Try a direct connection, without maps, and you should be all set.

  (Install the drivers manually is possible, but won't help here.)

• My new Dell win 8 PC does not recognize my CS5 install disc.

  My new Dell win 8 PC does not recognize my CS5 install disc.

  I'm ready to upload to the web, but I can't find the right site.

  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• MacBook does not recognize the SSD.

  Hello

  I would like to replace my HDD on my MacBookPro (13 "/ Mid 2010/ElCapitan") with an SSD. I bought a SanDisk card Ultra II 480 GB SSD and SATA to USB cable (this:http://www.ebay.co.uk/itm/251800670431?_trksid=p2057872.m2749.l2649&ssPageName=S % 3AMEBIDX % 3AIT TRK).

  I wanted to connect the SSD drive, format, make a copy of my HDD with SuperDuper! and change the part. But seems that my MBP does not recognize the SSD! I can't see it in disk utility, or in the office.

  What I am doing wrong?

  Thanks in advance.

  How have you plugged the SSD drive?  It is installed internally or externally via USB?

  Ciao.

• Dell XPS One 2710 does not start - should I all reasonable options?

  A few weeks ago, my 18 - month, Dell XPS One 2710 has started to act up.  Still not start correctly.

  Ran the Dell diagnostics on their Web site.  Everything was fine - no detected hardware problem.

  Yesterday, the computer completely stopped working.  It would be start, after a sweep of drive long, finally on the desktop, but can hang after 10 minutes.  I'm on Windows 8 (not 8.1).

  Today, I thought I would do a system restore to a point a month ago.   But today I can not get a startup complete, impossible to get on the desktop.  Therefore, can't do a system restore.  Instead, I see this screen.

  I have the options to continue?   I don't have a recovery disk.

  

  You can install 8.1 on top of what you have by a 16 GB or more usb flash drive as a bootable recovery media.

  If it does not recognize the key to your Bios, you can use a generic key for install but not activate.

  All the pre installed 8.x are 64-bit so make sure you download the correct version.

  XHQ8N-C3MCJ-RQXB6-WCHYG-C9WKB (Windows 8.1 Pro)

  Windows 8.1 334NH-RXG76-64THK-C7CKG-D3VPT (home)

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• Address book has exploded. Now iCloud does not recognize my Mac Pro, when you try to download the database fixed.

  For the second time in a year, my 'Contacts' times of 500 entires to 20,000. One card has become 5 to 15 each. How? Why?

  24 hours later, I have an address book * *.abbu backup file cleaned up and ready for download. My Mac Pro (Mac OS 10.7.5) uses address book version 6.1.3 (1091), "Enable this account" is checked in the preferences for access iCloud. When the box is unchecked, all contacts disappear.

  iCloud does not see my Mac Pro as a device, but the Mac Pro did see the iCloud, and I looked on all my devices I deleted all contacts and groups and finally all address books were empty, and no duplicate is possible. Then, I loaded the back up on top of the mac Pro, iCloud on. The Mac Pro is good looks. But the (OS 9.3.2) iTouch and iPhone 5 (OS 9.3.3) does not download the fixed file 'Contacts' downloaded from the Mac Pro. The 'Contacts' database fixed or not download to the iCloud of Mac Pro, or is not readable on other devices. And the Mac Pro is not recognized as a device when connected to iCloud.com and looking devices, but the iTouch and iPhone.

  I spent 24 hours in a row trying to solve this problem. I have run out of time and patience. And I can't find an answer to this anywhere!

  Help, please.

  Please, I beg you.

  You can add your computer from the link below?

  Apple ID - manage

• G7-1368dx Pavilion: Pavilion G7-1368dx does not recognize my ssd.

  I have problems to an ssd added to my computer.

  I tried two more different: 530) 1 Intel series-256 GB and 2) Crucial Mx100 - 512 GB.

  The Crucial drive is the one recommended by the tool of their compatibility.

  I tried calling HP support but everything what they told me was that my computer does not support an ssd and I think they're wrong, as I read messages like this http://h30434.www3.hp.com/t5/Notebook-Hardware/Does-HP-G7-1368DX-support-SATA-III/td-p/2798639http: /...  where Sergiy already has one installed and works.

  I tried several different softwares, tried tried cloning backup all seem to succeed but the when the drive is installed and I try to start I do not found disk errors.

  I also tried to use HP restore disks that I created with the HP recovery tool, they are unable to find the drive either. Even an iso of Win7 directly downloaded Microsoft can't find it.

  Thanks in advance.

  This is to help nothing else out there if they have a similar problem with ssd is not seen on the hdd0 port, but that a regular hdd works fine.

  Get a motherboard replacement for SATA cable. For some reason, one that came with my computer would see a normal hard drive, but not just any what SDS (I tried 4 different brands, so it wasn't a thing of brand).

  

• After reinstallings windows xp on dell XPS 420, he will not recognize modem and modem support moved disk

  I have a Dell XPS 420 I got help from this forum - reloaded Windows XP - reformatted successfully in car and now have Windows XP on the drive.  When I try to connect to the internet and set up this internet connection - will not recognize the modem.  When I put the disc inside modem will automatically the configuration menu of the computer.  I don't know what else to do.  I have AT & T internet service that worked perfectly before the reformat Windows XP works fine.

  Hello

  Refer to this link and check:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/XP-SP3-wont-recognize-internal-software-modem/06471daa-c761-4CE3-a8a6-ee01f5629852

  It will be useful.

• y510p does not recognize the SSD to the first boot.

  I have a new y510p that I received this week. First thing I did was to replace the HD 1 TB with my own OCZ Vertex 4 256 GB SSD Drive.

  When I turn on the laptop for the first time, it does not find a bootable device (through network devices, then says no bootable device). If I use ctrl + alt + delete to restart the laptop, it detects the drive on its own and begins booting in Windows.

  I would like to understand why this does not work the first time? I went into the BIOS and I saw that it says that there is no hard drive detected.

  This worries me a bit, like maybe one day, he decided to no longer recognize the drive after the ctrl-alt-del?

  Everybody that experience and have a work around?

  Thank you!

  Hey Z,.

  I appreciate your response! That's actually what I thought as well. What is strange, this is even after the firmware update, it seems, the question was always present, but I just had my laptop for a while and it booted up and it starts right in Windows.

  I was thinking about it. On the first boot after the update of the firmware probably had some time to "finalize" the update of the firmware, firmware update require a power cycle.

  Maybe the firmware update solve the problem after all, and it only took an another start after the initial report so that it can work properly

  I guess my advice to anyone having the same problem with a disc OCZ Vertex 4 is to spend at least 1.5 firmware (which is what I am now, and it's working properly). Beware that OCZ 1.3-> 1.4 and 1.4-> 1.5 will destroy the data on the disk, so if that's your primary drive, back up everything.

  I'm glad it works now!

• Dell Studio 1535 - Vista does not recognize 1397 wireless adapter

  Hello

  I had to reinstall Vista on my Dell Studio 1535 and the re-install, I wasn't able to connect to the wi - fi because apparently Vista doesn't recognize the card wireless site. In Device Manager, it lists the generic 'network controller' and has a question mark next to it.

  I installed system software Dell, Dell Notebook System software, Quickset, chipset drivers and the R206848 file that contains drivers of 1397, yet its still not recognized. What Miss me?

  Martin

  Thank you Rick. Still could not make it work this way, so ultimately I clicked on the generic and clicked Update Driver network controller and then said that he resembles c:\dell\drivers, and he finds the right driver and installed properly. Wireless now works!

• I moved CS4 Standard again win laptop 8.1. It does not recognize the serial number.

  I disabled and uninstalled CS4 Standard of an old laptop. I tried to install it on a new computer laptop win 8.1, using an installation folder (the new laptop doesn't have a dvd player), but it doesn't recognize the serial number. It installed ok as a trial, but is not a permanent solution.

  What can I do to activate it properly with my serial number?

  This information is incorrect.  your serial number, if it worked on windows xp, will work in 8 victory.  You may need to use compatibility mode, but even that is unlikely.

• try to reinstall dell AIO printer wizard does not recognize the installation disc w / my compatibility

  Have the disc supplied w/DELL AIO printer 944 photo. You need to reinstall.  Windows cannot check the logo test. What can I do?

  Hello

  1. What is the full error message?

  2. it worked very well?

  3 did you changes to the computer before the show?

   
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
   
   
   
   
  I suggest you to contact Dell technical support to check the new version of the software available.
   
  http://support.Dell.com/
   
   
  I hope this helps.
   

• Envy 17 J100: envy 17 job does not recognize my ssd

  My system has 1 2 TB HDs.  I'm trying to remove the two HD & install a new ssd from Crucial mx200 500 GB as my main drive.  They use Acronis cloning software to clone the old drive.  I tried to install the SSD on disc 2, but Acronis don't see cloning.

  Your right.  The problem was with the Acronis software.  I created a cover of Acronis True Image bootable dvd.  I booted from the dvd and load of the application of clone of Acronis.  It allowed me to select readers clone and the target.  Since he was able to create the partitions and files on the ssd.  Everything starts now to the ssd.

• Dell Inspiron 17R 5720 does not work with the charger. Charger is not recognized. No problem with charger.

  My Dell Inspiron 17R 5720 does not recognize charger. And unfortunately my warranty expired 2 months ago.
  It was plugged and work in the morning, but then in the afternoon I noticed he was running on battery only. It does not start without battery (charger just plugged).

  1 this is what I did to debug. Me and my brother, we bought the same computers Dell laptops at the same time a year and a bit ago. That's why a debugging purposes, it was good.
  I took my charger and plugged into his computer. And it works. Certainly not the charger problem I guess. And when I plug the charger my computer, green light is still on the charger. And I have the original charger provided with the laptop.

  2. now, laptop is running on battery only, so that means that this motherboard works. I think so.

  3. the next thing I did was charger disconnected and removed the battery from the laptop. Then I pushed and hold the "Power" button for 45 seconds to pay a royalty to the flea market. Charger plugged in but laptop will not start.

  4. then I booted the laptop on battery, went to the BIOS and check if the charger is recognized in the BIOS. No, it does not recognize charger. So, if this isn't a charger so what else can we?

  5 laptop has no strange smells so I don't know if something happened with the motherboard, but I guess that motherboard is ok because it works battery.

  6. I was thinking of updating the BIOS, but I can't do it, because it will be not be updated then the laptop runs on the battery, it needs to be plugged.

  Now I'm stuck. I don't know what I can do. I'm willing to spend a little more money on it to try to fix.

  If someone had such a problem in the past please let me know what you have done and if it fixed it.
  Or if anyone has any other ideas, I will be happy and appreciated the help.

  Hello and sorry for this late post. Just had this problem... If there is nothing wrong with the AC adapter, it's a software problem.

  Close the laptop... Unplug the AC adapter / CC... Remove the battery... Plug the power adapter... Start the laptop... Go to the control panel... Find and select the Device Manager... Batteries, left click... Uninstall Microsoft AC Adapter, uninstall Microsoft ACPI compatible with battery control method... In fact, uninstall all you can under the batteries, but that should be all there is. It will be re - install when starting... Stop cell phone... Remove the AC adapter / CC... Replace the battery... Plug the power adapter... Start the laptop... Now, everything should be good.

• WAP54g does not recognize the IP address of my laptop with active Mac filtering

  I have reset my factory default WAP54g v3.05 to allow access to the older computer to my network.

  Now, I reinstalled for better security using my new laptop: no SSID broadcast and WPA2-Personal encryption. However, when I activate the Mac filtering and allow my laptop more recent, the WAP54g does not recognize.

  Disable Mac filtering and my laptop is back on the network.

  Any suggestions to solve this problem would be appreciated.

  Make sure that the MAC address of the wireless network adapter in the MAC address filtering tab. To get the MAC address of the wireless network card. Click on start-> Go to run-> type-> CMD-> Hit Enter type ipconfig/all

  This will give a show you the MAC address for adapter ethernet and a wireless adapter. You must select one for the wireless network adapter.