Dell XPS 8700 Ram

Similar Questions

• Upgrade Dell XPS 8700 RAM or more?

  Hi all

  I'm a newbie here.

  Just try to understand the difference and value btwn completely replace my RAM by opting for a GOLD faster MHz while adding more RAM with the same (slower CHARACTERISTICS)

  Here is my PC:

  Operating system
  Windows 7 Professional 64-bit SP1
  CENTRAL PROCESSING UNIT
  Intel Core i7 4770 3.40 GHz 58 ° C
  HASWELL 22nm technology
  RAM
  8.00 GB Dual-Channel DDR3 @ 798 MHz (11-11-11-28)
  Motherboard
  Dell Inc. 0KWVT8 (CPU 1) 28 ° C
  Graphics
  FHX2300 (1920x1080@60Hz)
  Reference DELL 2009W (1680x1050@60Hz)
  1024MB ATI AMD Radeon HD 7570 (Dell) 55 ° C
  Storage
  223GB INTEL SSDSC2BW240A4 SCSI Disk Device (SSD) 31 ° C
  931GB Seagate ST1000DM ST1000DM003-1CH1 SCSI Disk Device (SATA) 31 ° C
  931GB Seagate ST1000DM ST1000DM003-1CH1 SCSI Disk Device (SATA) 31 ° C

  Here is my RAM:

  RAM
  Memory locations
  Total of 4 memory slots
  Used memory locations 2
  Free memory locations 2
  Memory
  Type DDR3
  Size 8192 MB
  Channels # double
  Frequency 798,1 MHz DRAM
  CASE # latency (CL) 11 clocks
  RAS # for CASE # Delay (tRCD) 11 clocks
  RAS # Precharge (tRP) 11 clocks
  Clocks of cycle Time (tRAS) 28
  Control rate (CR) 1 t
  Physical memory
  62% memory usage
  GB total physical 7.95
  GB available physical 2.99
  Total virtual 32 GB
  25 GB virtual available
  SPD
  Number of Modules SPD 2
  Slot #1
  Type DDR3
  Size 4096 MB
  Hyundai Electronics manufacturer
  Band bandwidth Max PC3-12800 (800 MHz)
  Part number HMT351U6CFR8C-PB
  Serial number 274980024
  Week/year 29 / 12
  Timing chart
  Frequency CASE # latency, RAS # for CASE # RAS # preload tRAS tRC tension
  JEDEC #1 MHz 457,1 6.0 6 6 16 22 1,500 V
  JEDEC #2 MHz 533.3 7.0 7 7 19 26 1,500 V
  JEDEC #3 MHz 609.5 8.0 8 8 22 30 1,500 V
  JEDEC #4 MHz 685,7 9.0 9 9 24 33 1500 V
  JEDEC #5 MHz 761,9 10.0 10 10 27 37 1,500 V
  JEDEC #6 MHz 800,0 11.0 11 11 28 39 1,500 V
  Slot #2

  Now, my understanding is that when the replacement of the most important identifier is the part number HMT351U6CFR8C-PB. Just do a search on this part number and you should be able to find the exact match of RAM, right?

  But what is not clear to me, is how do you find a REPLACEMENT RAM? Can I run DDR4? If I can run 1600 MHz or faster in this motherboard? What is the schedule?  Clock? This is where I get confused.

  In addition, I will not notice even a speed increase?

  

• Including 32 upgrade of RAM for Dell XPS 8700 8700-3312BLK X

  Could someone give me some specific links, perferalby on amazon, I need to upgrade my current computer Dell XPS 8700 8700-3312BLK Desktp X, which has 16 in 4 locations (of course) to 32 ewes?

  I want to do it as cheap as possible.

  Thank you!

  Nancy

  nancygail

  Could someone give me some specific links, perferalby on amazon, I need to upgrade my current computer Dell XPS 8700 8700-3312BLK Desktp X, which has 16 in 4 locations (of course) to 32 ewes?

  I want to do it as cheap as possible.

  Thank you!

  Nancy

  nancygail

  http://promotions.Newegg.com/NEPRO/14-2242/index.html?name=memory-Finder#oufDS360hVJAAAD

  http://www.Newegg.com/product/product.aspx?item=9SIA2F845P4509&cm_mmc=CNETFindMEMUS-_-9SIA2F845P4509-_-na-_-na

  https://www.amazon.com/s/?ie=UTF8&keywords=ct2k102464bd160b&tag=googhydr-20&index=aps&hvadid=91429747109&hvpos=1t2&hvnetw=g&hvrand=9577659747743147828&hvpone=&hvptwo=&hvqmt=b&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9027686&hvtargid=kwd-192362093332&ref=pd_sl_18culcequ2_b

  Bev.

• Dell XPS 8700 - A11 Bios - boot

  I have a Dell XPS 8700. I upgraded from Windows 8.1 to 10. As recommended, I've also updated the bios to A11 (the latest version of the bios). I have a processor i7, 24 GB of RAM and an SSD as boot drive - so it should be a very fast machine.

  The startup time for just the bios (i.e. excluding the windows 10) is 14 seconds - crazy for a long time. It takes more time for the bios to start it makes for the time it takes for 10 Windows to start. Note that the bios startup time is confirmed by opening the Task Manager and looking at the Startup tab.

  My previous bios version was A03, who was still slow to start (8 seconds for the bios to start), but better than the A11. I see that some of the other bios versions after A03 were also slow to launch and I've deliberately downgraded these versions to A03 to improve startup performance.

  How can this bios startup time to accelerate because it does not seem normal to take so long?

  Note: I have external USB hard drives and I tried to disconnect these and it does impact not bios boot time.

  When you say the startup time of 6-7 seconds, you're talking at that time:

  1. Press the button market at the moment, the BIOS is ready to load Windows, but excluding the loading of Windows. or
  2. to completely load Windows, but excluding the BIOS load game; or
  3. Press the button of power both on Windows is fully loaded (i.e. 1 + 2)?

  For 1, I get about 13 seconds, I think, for 2, I get about 40 seconds, to be 53 seconds in total. On paper my PC should be very fast, so I guess that--and kind of hoping if my system is massively under fulfillment - your done 6-7 seconds simply reference to 1.

  Thank you.

• CPU COOLER DELL XPS 8700

  What are the coolers possible cpu that you can install on the card mother dell xps 8700 motherboard without any editing fancy ghetto. As if it were a normal MOM?

  The XPS 8500, the forerunner of the XPS 8700, has standard spacing Socket 1155. Taken 1150 share spacing of the 1155, and so according to me that a spare cooler should run.

  Cooler Master Vortex was perfect on my XPS 8500 motherboard, and I assume that the same would hold true for a XPS 8700. You will use the type of optical drive screws to fix the cooler for the Board of directors rather than fragile plastic bugs.

  Looking at a motherboard XPS 8700 on eBay, I can see a standard header for the fan on the CPU at four pins, as well as the XPS 8500.

• Failures of start-up and recovery Dell XPS 8700

  The system is 2 years old.  No recovery image was never created.

  Here are the original symptoms.

  1. cannot start Windows 8.1 on Dell XPS 8700.
  2 OS refresh fails.
  3. OS restore points fail.
  4. OS auto repair fails.
  5 restart the failure of Options (Safe Mode, start Debug mode).
  6. command prompt fails (cannot find all administrator accounts).

  Done so far:

  Created a bootable flash drive. After changing the BIOS setting to boot using the USB key, first of all, the PC started successfully. Then, I was able to access the command prompt and save the user data files.

  Then, I went back into the BIOS and changed the boot order to the internal HARD drive. I rebooted and finally started a reset from the PC (factory restore). After the reset process has reached 4%, I got a reset failure message. A subsequent reboot then gave me an error message file BCD 0xc000000d "the BCD file is missing information". The next restart gave, I can best recall, 'no partition not found on the internal hard drives And I could see no longer the menu of UEFI, just the BIOS (A06) firmware. After change the order of boot and boot to the flash drive, I could see that a lot of files apparently had been marked for deletion on the C: drive as user profiles did not appear. At one point, the flash player had become the C: drive and HARD drive is X:. But which cleared up later. After getting the quick C: folder to the HARD drive, I published the following commands Bootrec /fixmbr and /fixboot, Bootrec scanos Bootrec rebuildbcd Bootrec. After trying to start once more on the internal HARD disk, I had another variant of the BCD file error, 0xc00000098 "the BCD file contains no valid information for the operating system".

  Any chance of recovery in this situation?  Otherwise, I guess we will have to get a replacement drive (that is, SSD) and a copy of Windows 10.   Thank you.

  Hi 2Tallinva,

  Yes, that sounds like a hard disk failure. You can try this site to download a disc Windows 8.1. Of course, a free update to win 10 is better than paying for an OS you already entitled to.

• 3 installation of monitors on Dell XPS 8700

  Hello

  I realize that he had already given a few questions and answers on this topic, but I'm still a little confused, because this kind of thing is not my strong point.  I would be very happy to help here.

  I just got a new Dell XPS 8700 with a videocard of NVIDIA® GeForce® GTX 745 4 GB DDR3.  I'm going to need to have a 3 monitor configuration in the near future and I was wondering the best way to make this work.  The video card has 1 VGA - HDMI, DVI-D-1 and 1.  Separated from the video card, there is an another HDMI and a Displayport.

  I have not completely made my decision between 3-23 "or 2-23" with 1-27 "immediately.  (Will not be the fanciest monitors in the world). Exodus 3 - Dell S2340M or 2 of those and pick-up and Ultrasharp for fun.

  I'm not a gamer.  I'm a trader.  I can't manage any lag when updating. I'm not too concerned about the image is as clear as possible.

  Thank you much for the help.

  You can use as well the equipped with an Intel HD4600 video card and a video card discreet if Intel Multi display is enabled in the Bios. With the Intel option enabled multi-display, HDMI on Board will be the primary display and ports on the discrete card screen will become secondary display. Read this article before you proceed.

• Clarity on a Dell XPS 8700 with 2 TB SATA + Intel® SRT 32 GB SSD Cache harddrive

  Hello

  I am buying a Dell XPS 8700 with a SATA hard drive with a 32 GB SSD cache. I want to know if the SSD is a separate physical disk SATA hard disk, it will be the M.SATA chip on the motherboard.

  Please it is confirmed; I can by adding a larger 256 GB internal SSD, with the o/s re installed on the SSD with HDD as storage of 2 TB.

  Best regards & Thanks Sean

  Hi Sean,.

  Yes, it's an mSATA SSD and scalable. You have the option to install the OS on a bigger mSATA SSD if you choose to do.

• Dell XPS 8700 no power

  Have a Dell XPS 8700 I bought in October 2013.  The other day while my daughter was doing her homework the Tower just closed.  Will not supply this time.  The green light on the back of the power supply does not light.  The led "Power to the" yellow inside the East.

  When I press the button reset, next to green light, at the back of the power supply, the light turns on fans in the case operate one puts the optical drive.  So, it is the power supply or the card mother kaput?  Or is there some waay to put things?  Tried the thing "press and hold the power button / stop for 25 sec ' without success, and also left it unplugged overnight.

  Remove the battery on the motherboard CMOS. Leave, try it for a few seconds then put back in. Try to start the computer after. The green light on the power supply goes off while the computer is not turned on. As the light does not illuminate and things go when you press the test button, your diet should be fine. It could be your motherboard, before we know try resetting the CMOS battery, as I mentioned above. I hope this helps!

  -Brandon

• Dell XPS 8700 - Recommended 500W PSU +? (for GTX 970)

  Hi I have a dell xps 8700 currently equipped with a GTX 745, I want to upgrade to a GTX 970.

  I know that this has been a big problem in the past, but I just want to check a few things: is - it works even in the first place? Replace the power supply and update the BIOS to a10? I'm hoping to get a definitive right or close enough answer to the question of whether it works or not, especially since he was a few months after the last major discussion forums.

  And the main question, which is a recommended PSU is going well replace my current 460W one?

  CORSAIR CS750M works in every Dell I have ever installed in it.

  No power problem.  You may need to remove the optical drive so that you can get the old and the new, because it's a very tight fit.

  Once in the optical drive can back up.

  550W is too small.  Generic 550W power supply is ACE is NOT GOOD as the Dell 305 w PSU.

  The EPS12V 2.92 specification guarantees 170w combined on the 5V / 3.3V rails and 20W on the 5VSB and 45 amps on a single 12V rail.

  Note on the label for the Dell they provide 20W on the 5VSB.

  That's why I recommend an EPS12v Corsair CS750M

  

  You need a certified Power Supply EPS12V 2.92

  Supply Dell 20-25W + 5VSB and most of the cheapo units have 10W or less.   Dell Supply guaranteed 130 to 180W on 3.3v / 5v rail and other are not.

  Minimum recommended unit is CORSAIR CS750M.

  http://www.microcenter.com/product/425477/CS_Series_CS750M_750_Watt_ATX_Modular_Power_Supply

  http://www.Amazon.com/Corsair-series-modular-efficient-CS750M/DP/B00GH9NA0A

  http://www.Corsair.com/en-us/CS-series-modular-cs750m-

• Dell XPS 8700 how turn on?

  I have a desktop computer tower Dell XPS-8700 newish PC. He died during the other days of power outage, and now I can't turn it back on. It doesn't seem to be any power button visible on the front of the unit. On the back, just below the power connector is a small push button. If I push the fans and things seem to start that going on, but as soon as I release the button it turns off again. How can I activate this PC?

  I can't believe I have to ask this question after 30 years of use of PCs.

  Thanks – Rowan

  Number 6on the top.

  

• Windows 8.1 does not appear in the store Windows Dell XPS 8700

  My desktop computer Dell XPS 8700 arrived yesterday, but I can't upgrade Windows 8 to 8.1 of Windows. I went to several Microsoft Web sites where they say on a Windows update and I have to have before the upgrade is displayed in the Microsoft store. I checked I did all Windows updates available including
  you need to upgrade to 8.1. I tried "wsreset.exe" running to clear the cache of Windows store. This is not a business system. It's a regular OEM Dell version of Windows 8 that came with the machine. No matter what I do the update does not appear in the Windows store. I thought maybe since I was using the same Microsoft account for my laptop I already upgraded 8 to 8.1 that maybe he thought I was already updated. So I created a new account of Microsoft, created a new user, delete the old user and tried to get the upgrade as a Microsoft account fresh and a user. Still no luck. I saw another person posting a message on a forum somewhere that had a similar problem on this exact model as the only answer that I was to go to the Microsoft page that tells you to do what I've done. Any suggestions or websites where I could crosspost this problem would be much appreciated.

  I copied and pasted the steps below from another thread. The procedure worked for me both my 8700 s after that I had tried just about every other proposed solutions. I hope that the procedure will work for you too (assuming that you have not already tried).

  (1) uninstall KB2871389 and restart.

  (2) download the update of Microsoft KB2871389--> http://www.microsoft.com/en-us/download/details.aspx?id=40098

  (3) manually install the KB2871389 update and reboot.

  (4) you must now (I hope) see the 8.1 update in the Windows store.

• DELL XPS 8700 compatible with the monitor Samsung Syncmaster 2232 office

  HI - can anyone confirm that the DELL XPS 8700 desktop computer is compatible with the monitor Samsung Syncmaster 2232.

  Already, I have the monitor, but need a new processor unit.

  Thank you...

  Hi yydelilah,

  The monitor has VGA and DVI ports.

  By default, XPS 8700 comes with HDMI and display port.  If the system is configured with a discrete card, and this card has DVI/VGA port, you will be able to connect to this monitor.

• HP Photosmart Premium C309g not install on Dell XPS 8700

  It was to find work as a printer ethernet with my Dell Optiplex 790 on Windows 7 Pro, and Windows 8 Pro.

  Have a new PC now... the Dell XPS 8700.

  At first, I had problems adding network printers that I've never had before. Had to do with my installation of drivers GotomyPC and kernel, I suppose. Found a GP to disable doctor who was not allowing the kernel drivers must be loaded and sets.

  Then I tried to install the printer C309g. The printer has detected and tried to install it and was stuck at 42% for about 1 to 2 hours. I restarted and then uninstalled... Uninstall becomes far and then stops now. Followed the instructions with my ESET security.

  Then I tried again... it installed the driver but could not find the printer (which was the and connected)... tried to add a device a few times with no luck.

  Uninstalled (abandoned again separated by the uninstall). Any suggestions on how I can get this printer working again?

  SOLVED

  Don't know what thing took care of him, but I ran the HP uninstall for all-in-one and I uninstalled ESET and be on the safe side, even uninstalled gotomypc (which shouldn't matter). Then tried to install it again and it worked very well. I'm leaning towards a combination of ESET (Version 7) and the uninstall utility that probably did the trick. Since reinstalled ESET and gotomyPC and everything seems OK now. It can even help to unplug and plug in the printer (wall plug) since these printers sometimes have problems of power even when you have plugged into the wall outlet and the printer seems to be OK, but this isn't somehow.

• Dell XPS 8700 Windows 10 questions with SD card reader

  Hi, I bought a new Dell XPS 8700 three months ago.  It comes with Windows 8, even if I asked for preinstalled Win10.  The Win10 upgrade process was fairly straightforward.  However so far three times the SD card reader stopped working.  I fix it by reinstalling the drivers.  Its not working again and my USB stopped working also.  Is there a background process that interferes with USB / SD card drivers?  Anyone else noticed this behavior.

  Rgds Frank

  You can try this:

  Go into Device Manager, and then double-click the entry for your SD card reader. Assuming that he has one, click on the power management tab, and uncheck the box 'allow the PC turns off... ». Now, do the same thing in Manager of devices for all your USB root hubs.

  Then go to the options screen to win 10 powers, click on advanced settings and turn off hybrid sleep. Reboot and see if that helps.