Similar Questions

• Deny access to Internet with PIX 500 series

  I need deny all access to the Internet for some guests at various locations. We use the PIX 501 and 506 firewalls to create a full mesh of VPN between offices. How to configure access lists to deny access to the Internet to only a certain number of hosts?

  Configure an access inside the interface list and begin by denying the host that you want to block after that add the hosts and protocols that should be able to connect to the Internet.

  example:

  Internet access list deny ip 192.168.1.10 host everything

  Internet access list deny tcp host 192.168.1.10 any eq 80

  allow Internet access list ip 192.168.1.20 host a

  ...

  Give me a more detailed example.

  You can also work with groups of objects to be more specific and group several UDP or TCP port.

  example:

  object-group service tcp Web

  EQ object of port 80

  EQ object of port 443

  object-port eq 21

  internet access list deny tcp 10.2.1.0 255.255.255.0 any object-group Web

  Internet access-list permit tcp host 10.2.1.10 a host Web object-group

  allow a whole list of internet access

  sincerely

  Patrick

• Deny access to the Internet

  I am very new to Cisco firewalls (got a little thrown in there) and I had a request to come down the pipe to deny access to the internet for a single internal IP address. My firewall is a PIX 515e. I'm guessing this has to do with the access list, but I don't know if I need to create a group and add only a single IP address to it or how really, even go about it. Any help would be appreciated.

  Andrew

  What you posted, it is difficult to find how different access lists are applied (how they are used). But it seems that you need another list of access. What you might look like this:

  inside_access_out access-list deny ip host everything

  inside_access_out ip access list allow a whole

  inside_access_out access to the interface inside group

  HTH

  Rick

• Cannot access the internet with bridged network - Windows 7 64 bit host, XPSP3 comments

  I use VMPlayer v3.0.1 build-227600 on a PC under Windows 7 64-bit. My guest operating system is Windows XP Professional w/SP3.

  I read all the messages on the use of NAT for the guest operating system can access the internet. But when I do that my guest is unable to access my Oracle server on my network. If I use Bridged my guest can access my Oracle server, but it cannot access the internet! How can I fix it? Shouldn't VMPlayer allow the guest OS to access the network and the internet? I need these two features.

  Any help would be appreciated.

  the simplest solution would be to add a second NIC to your comments, so that you can have bridged and NAT at the same time

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Access to the internet via 'comments' or another user account

  When I try to access the internet via the "guest" account, I get the message... "Internet explorer has stopped working"... and I can't accest internet from any other account on this computer, except the administrative account or 'guest'.  What gives?

  You mean any other admin account or standard account?
  This isn't a good idea to use the guest user account check this: http://technet.microsoft.com/en-us/library/bb418978.aspx
  Create a new standard user account to check.

• Comments (Ubuntu) can not access the internet through host (XP)

  I used Google to find a solution as to why guest (Ubuntu) cannot access the internet. Host system is Windows XP. None of the solution has not worked for me. Solutions that worked for others: 1 activation NAT 2. Allowing the shared internet connection

  I think the problem is that my host and guest use different subnet masks default (respectively 255.255.0.0 255.255.255.0 vs) assigned by DHCP. The host's configuration manually to use the same subnet mask doesn't help either. I guess that I have it configured incorrectly.

  Welcome to the community,

  I think the problem is that my host and guest use different subnet masks default...

  Your configuration looks like, it has been changed manually! Default vmnet8 (NAT) on the host computer has an IP address like 192.168.x.1/24, comparable to vmnet1 (Host-Only). I suggest that restore you the configuration to its default settings that should work as expected.

  André

• HP 15 laptop: laptop computer is connected to the wi - fi connection, but cannot access the internet

  Hello

  My problem is my WiFi says its connected but I can't browse or access the internet.it just tells me "unable to connect to internet computer is not connected to the internet", but my wifi says 'connected'.i tried to go to the cmd prompt and typed in "netsh int ip reset resetlog.txt c:\" goal it shows me "reset failed.access is denied .he don't s no user specified settings to be reset to zero." please "» What can I do?

  Thanks in advance.

  Hello @jerome256,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I understand that you are having a problem with your WiFi and wanted to help you!

  You are trying to access WiFi through router?  If you are connected to your wireless network, but cannot access the internet, then the problem may be with the router.  Check that the router is connected to the internet.  If you have more than one router, then you can ensure that you are connected to the correct router.  You can also try unplugging the router for about 30 seconds, and then reconnecting it.  Please consult the following document, as it can help solve the problem for you:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Have a great day!

• Reinstalled XP, but now I can't access the internet

  Hello

  I recently reinstalled Win XP on the same computer on which this copy has been installed.  The computer will have access to our home WiFi network, although he does not always see other computers on the network.  Worse, is that when I run IE6 Service Pak 2 (the version that is installed on the original disc), I can pull up the MSM homepage which will remain for about 15 seconds, then I get an error that IE has to close.  I think it boils down to "I can't access the Internet."  Tried everything that I can think and followed a number of suggestions on this forum.  I've seen comments that I need the update to Windows Service Pak 3 here, but, of course, I can't that without access to the internet.

  Any ideas?  Thank you, Susan

  A few thoughts...
  -from another computer...
  -Make sure you get all the drivers for your computer from the manufacturers Web site
  -Download a form any anti-virus (MSE for example)
  -Download SP3 from here: http://www.microsoft.com/en-us/download/details.aspx?id=24

  Once you have done this, I hope you can get on the Internet. Once there, get all your updates.

  I hope this helps.

• Cannot access the internet with WRT54G hung Hughsnet Satellite HN9000 modem

  I tried to configure my router to work with my Hughesnet HN9000 satellite modem WRT54G and my desktop tray.  I have a Gateway PC and am using Windows XP. I had worked in the past but came out the router for a few months when my portable wireless is dead. Now, I can not the desktop computer to access the internet with the router in place so I can set it up. The cables are all plugged in right. Cable from the modem to the internet port on the router and the Router 1 port Ethernet cable or 4 for desktop.  I cycled all over and outside. I can access the internet fine if I have the modem connected directly to my computer so I know that I have an internet connection. Hughsnet says it's the router. Because it is out of warranty, I can't get any help from Lynksis. I ran the set up disk Lynksis. I suspect that error messages I receive it has something to do with the IP address. But if I can't access the internet how can I do anything with the IP address of the router?  I'm not very experienced when it comes to the routers and network settings. Anyone has any comments that could help. I should be able to figure it all out if I can get just the router connected to the internet. . Thank you...

  Thanks, I found the problem. The Ehernet cable plug was defective. It would work on the Satellite modem, but not the router because of the localities of diffétent and different stress on the card. Changed the cable and everything works fine now.  Thank you.

• Windows Mail keeps denying access to e-mail attachments that are .jpg picture files.

  Messaging Windows keeps denying access to e-mail attachments that are .jpg picture files.  How can he blocked so I can see the .jpg pictures?

  original title: Windows Mail has blocked access.

  Have you installed IE9? What Steve says.

  Internet Explorer 9 breaks the Windows Mail feature
  http://www.oehelp.com/OETips.aspx#15

• Offline Installer CC Adobe (photoshop, lightroom, bridge)? One of my mac cannot access the internet.

  Hi, I need Installer back CC Adobe (photoshop, lightroom, bridge).  One of my mac cannot access the internet.

  Is there a link for an installer for them offline?

  I found that this is a link to the forum discussions " http://trials3.adobe.com/AdobeProducts/PHSP/16/osx10/Photoshop_16_LS20.dmg?PID=2159997 " ' but it does'nt works for me. "

  It is said

  Access denied

  You do not have permission to access to " " http://trials3.Adobe.com/AdobeProducts/PHSP/16/OSX10/Photoshop_16_LS20.dmg ? "on this server.

  Reference #18.cd72afc3.1450863956.3ab05b71

  N ° 1)

  Click on the link below and 6 CS download page opens, DO NOT download anything from there, just keep it open

  https://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  If we do not keep CS 6 page open, you will get the access denied error.

  Step 2)

  Click on the link below:

  http://trials3.Adobe.com/AdobeProducts/PHSP/16/OSX10/Photoshop_16_LS20.dmg

• My Firefox browser cannot access the Internet, so I use my iPad.

  I forgot that I have to use my iPad email. My office is not talking about the Internet this week. Troubled shooters are no solution. The closest I can come the problem is a message from the homepage on chrome. It says 'DNS probe finished. "
  no internet"not much to go for me in any case. Appreciate any help that anyone can provide. I suspect a proxy problem, but it's way above my head. I am former over the years and the new in computer talk, so be simple in steps to resolve. Thank you. George sends.

  _{Edit: removed personal information for your protection. (philipp)}

  Type of topic: preferences #advanced< enter > in the address bar.

  Under Advanced, select network.
  Search for configure how Firefox connects and then press the settings button.
  If you use a proxy server, make sure that these settings are correct. If there is no
  proxy, first use No. Proxy. If there is a problem, then try Proxy system.

  Some problems occurs when your Internet security program has been implemented.
  trust the previous version of Firefox, but not more acknowledges your
  update as being approved. Now how do I solve the problem: to allow
  Firefox to connect to the Internet

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
  • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}

• cannot access the internet after upgrading to firefox 30.0 on windows 7

  After the upgrade to firefox 30.0 on windows 7, cannot access the internet. FF 30.0 works OK under Vista

  Sometimes it's because of your security software thinking that the upgrade may not be legitimate. You can consult this article: problems connecting to websites after Firefox update.

• I can't access the internet with IE 11 on my PC so I would like to download Firefox on my laptop and install it on my PC. I have been using Firefox on my laptop.

  I use Mozilla Firefox on my laptop and I would like to install it on my PC because Internet Explorer 11 stopped working. I can't access the internet so I downloaded the installer of Firefox on my laptop and saved on my PC. It initializes, but unable to connect to the internet to retrieve the program. How can I work around this problem and install your browser?

  Unfortunately, it did not work. I tried downloading earlier and it cannot connect to the internet. I need the program to install. I reset IE 10 as their recommended technical support and I even tried to reinstall, but that no longer works. I'd rather have Firefox

• I changed my password three times but am still denied access

  After having the same password for several years, I am told that my password is now false. I tried to change the password, but am still denied access to my email. Is the problem with my username I've had for many years? What should I do to access my email account?

  Thanks christ1. Your suggestion to try my other webmail password worked and I can now get into my e-mail from Mozilla Thunderbird. Thanks again... gl1500telusnet