DEP continues to kill the heart of Nvidia Control Panel

Similar Questions

• DEP close the nvidia Control Panel

  I have windows update and software Nvidia.  DEP stops repeatedly 3.9.731.0 Nvidia Control Panel application it is supposedly compatible with windows and requires the DEP run.  I don't have the ability to disable DEP.  Any suggestions?

  James,

  Additional information is available on the Nvidia http://forums.nvidia.com/index.php?s=85abefcc6785e0c9c139ffa408e38153&showtopic=214021&pid=1325373&st=0&#entry1325373 forum

  It seems now, Nvidia recognizes the problem and said that the only solution is to go back to an earlier version of their driver.  As has been said before - unacceptable for a certification program.  Hope that Microsoft does not distribute this version in Windows Update!

• Satellite A665-15U 3D stereoscopic missing definition in the Nvidia Control Panel

  Hello

  I currently have a computer toshiba laptop A665-15U with an nvidia GT 330 M and an acer hd5360 projector.
  After checking on the nvidia site, GT 330 M working with 3D and my projector is also compatible with 3D.
  I also have the vision 3D Kit 2.

  The issue is that stereoscopic 3D is missing on my Nvidia Panel,
  I have contacted the customer of NVIDIA, mail service, and they said that:

  + To work in 3D display must connected to the NVIDIA graphics card. +
  + I would suggest you check with the manufacturer of the laptop if there was no output or not connected to the NVIDIA graphics card. +

  But I check on my laptot, there is only a single VGA port.

  shrieked, the screenshot of my connection:
  http://www.ZimageZ.com/zImage/screenshoot22.php

  is that what someone was the question?

  More information:
  I installed the latest nvidia driver:
  Version:
  306.97 WHQL

  I ran on 120 Hz on my projector

  I tried to remove and reinstalled the last pilot

  I tried to use only stereoscpic 3D driver on toshiba support website (does not work):
  10/06/10
  Stereoscopic 3D driver
  nVidia Windows 7-64 bit

  Hello

  To use nVidia 3D Vision, you will need to set the projector at 120 Hz
  You can do this in display properties
  Control Panel-> appearance and personalization-> display.

  In addition you must set the GPU nVidia as a default value for specific programs to use 3D on 120 Hz disaply external.

  Start-> Control Panel-> nVidia Control Panel.
  Now, expand 3D category settings and select manage 3D settings.
  In the program settings tab, select a program that needs to use the nVidia GPU (required for 3D) map

  Now select the GPU for this program.

  Here you will also find the universal installation guide of ision 3dv too
  http://www.nvidia.de/content/3DVision/docs/3DVision-universal-install-guide-aug12.PDF

• T430: Cannot change the GPU using the NVIDIA Control Panel

  Hello world

  I recently bought a T430 including a NVIDIA NVS 5400 M. games graphics card (for example, Max Payne 3) used to run fast, using the NVIDIA GPU. Today, I tried to play a video game once more (after having not played for several weeks). Unfortunately, my OS (Win7, 64-bit) assigns the GPU from Intel, resulting in a much lower speed. Using the NVIDIA Control Panel, I can't change my favorite GPU (changes will not be saved). I already run a update of Lenovo and installed the latest graphics driver (296.88), which resulted in no improvement.

  When you start a game, I can choose my graphics manually, but I would like to configure some general settings using the control panel.

  Do you have any solutions?

  Thank you very much.

  
  

• Find the nvidia Control Panel after installed of new Vista Business (Spack2)

  Recently installed the new hard drive and therefore had new Vista Business installed (downloaded, with Service Pack 2).  The Nvidia Control Panel is 'gone' if I can is more set up two external monitors + for computer laptop is to say as a "clone".  PC automatically to an external monitor as soon as plugged in.  When I connect to an HDTV, it's same with a resolution of crazy.  Any advice?

  Thank you

  Hello

  ·        You have installed the drivers for the graphics card from nVidia?

  Once you install the drivers for the graphics card, it automatically installs the nVidia control panel. If you had bought the graphics card, you may have been provided separately with a DVD, check also in the DVD provided with control panel map.

  To download the latest drivers follow the link given below.

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Data execution prevention has only nvidia control panel startup (nvcplui)

  Original title: data execution prevention

  DEP stopped nvidia control panel (nvcplui) from. Cannot change the DEP setting to allow control panel start. I think that the nvidia Control Panel is the only way to install a second graphics card (not SLI). Any advice would be welcome. On top of this firefox crashes now so I switched to google chrome which seems OK

  Thank you

  Hello

  1. What is the exact error message you get associated with DEP (data execution prevention)?

  2. when exactly you get the error message?

  Follow these methods and check if that helps:

  Method 1:

   

  I would suggest you to download the latest drivers for the graphics card on the Nvidia site and install it on your computer.

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Method 2:

  I suggest you to update the latest version of the BIOS on the manufacturing site and check if it helps.

  BIOS: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Method 3:

  You can check the links below and check them if the information provided will help you solve the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-data-execution-prevention

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-Windows-closing-my-program

  http://Windows.Microsoft.com/en-us/Windows-Vista/data-execution-prevention-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

  I suggest you to post your query in the Nvidia forums and check.

  http://forums.nvidia.com/index.php?s=18dc40e9ac048162314eaef73d5b47cb&Act=IDX

• Windows updates driver Nvidia and Nvidia Control panel stops working

  I was choosing to update the video card myself with the latest driver 310.09 being installed, and everything was fine. Then I started having "failed to initialize Nvidia Control Panel, you don't have permission to access or access denied errors at startup and to the continuation of the investigation I found updated encrypted files (c:\windows\system32\nvcpl.dll being one of many) and a Nvidia driver recent 311 already in the section updates installed windows from the control panel."

  Now, I have no Nvidia Control Panel, but I managed to roll back the driver to 310.09, but still with no possibility to install driver 314, or remove any previous version using uninstallers. I'm stuck in the middle with nowhere to go!  I want my back Nvidia Control Panel, and I hate error messages!

  Intel i5 processor 3770 3.4Gig

  GT video card 620

  Windows 8 Pro / clean install

  16 gig Ram

  1 T HD

  Problem not solved! When I did the screen went black, with me ends up having to re-start, the machine came back, and before I can do anything Windows back to or downloaded 311 driver and I'm at square one. Impossible to uninstall any Nvidia or reinstall anything Nvidia.

  If Windows will update a 3rd party driver why it deletes the old software first. Now I have the supplied Windows driver 311 mixed with the old Nvidia provided 310 software update! It's no wonder that nothing works!

  Sorry to here that you still have the problem...

  Just go through these links and check if you can attach to your solution...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-hardware/system-freeze-possibly-caused-by-NVIDIA-graphics/6fae9d7a-87D1-4d40-9e35-adb0a6751f95

  http://www.pcandtablet.com/Windows-7-drivers/80/after-upgrading-my-graphic-drivers-i-cant-log-into-Windows7-PC-blue-screen-appears.html

  Just give us an update after this

• Satellite M500 - NVIDIA Control Panel does not display

  I have a portable Satellite M500 (part No. PSMKCA-009007) running under Windows 7 64-bit.

  I can't open the NVIDIA Control Panel Windows Control Panel.
  Error message is displayed: "failed to create extension NVIDIA Display Panel. Possible because - incorrect version.
  NVIDIA driver installed - 189.73 (GeForce G210M).
  There is a driver version available later anymore - 275.33.

  How can I get the NVIDIA Control Panel to open?
  Can I upgrade the driver to version 275.33 - is - this compatible with the Toshiba M500?

  Are you using the original recovery image Toshiba for Windows 7 64 bit? According to laptop specification this recovery image comes with your laptop?

  It is recommended to use tested Toshiba drivers only. Have you tried reinstalling the driver NVIDIA offered 189.73?

• Zbook 17, Quado610M GPU. NVIDIA Control Panel does not settings.

  Hello

  I have a zbook with a graphic of 610 m nvidia quadro. I can't have the gpu to save the settings or when you play. It worked until I tried to try windows 8.

  I did a fresh install of windows 8. Then I installed the drivers cd provided with the workstation hp. All that said she completed successfully and I rebooted several times.

  When I open the nvidia Control Panel, none of the settings I change stick. For example tell each program to use the 610 m. I click on apply it looks like it is cracked. However, if I open the nvidia Control Panel, even once, all changes are returned. I rebooted after hitting applied too. No matter what changes are, they all come back.

  I'm guessing that I messed up the installation of driver or something but IDK.

  Device Manager indicates that the 610 m works correctly and the driver is up do date. Any ideas on what to do?

  It turned out to be a driver problem.  I don't know if I have installed the incorrect drivers or something.

  I updated to 8.1 and reinstalled the drivers. Works fine now.

• When I opened my NVIDIA Control Panel, it will crash. What can I do to stop this?

  I want to change some of my NVIDIA settings, but I can't. When I opened my NVIDIA Control Panel it crash and say that Windows is trying to find a solution... blah blah... I tried to restart my computer and it always does. I really don't want to reinstall the drivers... It's just too a hasel. Any help is appreciated, thanks.

  You will probably have to re - install your dirvers but it should be a work about 10 minutes.  What sweems be the problem during installation?

• NVIDIA Control Panel does not open

  I just reinstalled Windows 7 on my PC and the NVIDIA Control Panel does not open when I click on the link in the windows control panel.  I installed it by using Windows Update.

  Updates Windows reports that it installed properly but the Panel itself will be open from nt.

  Should I remove it and reinstall again?

  Version is Ver: 191.07

  Hi AdelaideJohn67,
   
  I suggest to uninstall existing NVIDIA Control Panel and restart the computer. Visit the NVIDIA Web site, download and install the drivers manually.

  http://www.nvidia.com/download/find.aspx?lang=en-us
  After installing the drivers, restart the computer and just do a right click on your desktop and watch if the NVIDIA Control Panel whether or not written.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Cannot access nVidia Control Panel in Windows 8

  Hello
  I have a small problem when I try to access nVidia Control Panel. I said that I don't currently use screen attached to nVidia GPU. This is because my laptop using my Intel GPU. My question is how can I solve this problem, I need to enter the CP to change certain settings for the games, but my WIndows 8 was not preinstalled, so I can't access the BIOS for a reason to change the primary GPU.

  Hi Tarik,

  Please provide an opportunity to help Microsoft Community.

  Before you start with the troubleshooting steps, I would ask you to answer the questions below:

  1. What is the number and the model of the computer?
  2. When you open Device Manager you are able of NVidia graphics card under the graphics card?

  I checked online based on the error message that you provided and it seems that this problem is caused if you have the drivers for the graphics card from NVidia are exceeded.

  The first step in troubleshooting, I would ask uninstall you the drivers of graphics NVidia from the programs list in the control panel.

  See the link below for more information on how to uninstall the drivers from Control Panel NVidia graphics cards.

  http://www.nvidia.com/object/IO_13955.html

  Once you uninstall the drivers, visit the download link of the manufacturer provided below and download the latest drivers. Based on the model number of the graphics card, download and then install the drivers. Restart the computer after installing the drivers.

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope that the information provided is help. Let us know the results, so that we can help you further.

• PPPro cs5 and NVIDIA Control Panel driver

  In one of the threads earlier someone said that when they went to the Nvidia Control Panel they only saw PPpro CS4 listed and no CS5. I have the same problem. Is this a problem? Of course, it is a hack of a GTX 480 version. Thanks again once Roman I should however say it works!

  No, it's a limitation of the nVidia Driver has no consequences. She simply search the file "Adobe first Pro.exe" regardless if it's CS4 or CS5.

• NVIDIA CONTROL PANEL APPLICATION HAS STOPPED WORKING

  I have a big problem here with NVIDIA cards and have not at all been luck. My problem started when I had a clean install of Vista 32 on my HP XW6600 that came with Windows XP installed with the option to upgrade to Vista. When I upgraded I also improved my 9500 GT GPU, to Quadro FX1700. When I tried to open the control panel I got was an error message saying: he has stopped working. I never had this problem under XP with the 9500GT.

  Later, I sold the quadro and bought the Geforce GTX260 and had a clean install of Vista 64 on my system. But still cannot open the nvidia Control Panel. I am a professional video editor and the needs of the advantage of two monitors when running Adobe Premiere PRO CS4. I saw a few forums that says to uninstall all the drivers from nvidia, use CC cleaner or Drivesweeper, in safe mode and reload drivers Nvidia once more. but all have failed.

  My patience is running out now, and I now plan to go to ATI cards. I wanted to take full advantage of with nvidia cuda and rejoiced to buy a quadro 5600 for additional performance. I just ordered a second DABS.COM monitor which I intend to hang with my system and bypassing the Panel I'll be in trouble of control of Nvidia.

  I'm missing something here. Please tell me know if you have an idea on how to solve this problem. I've attached a screenshot of the error message I get.

  System
  HP XW6600 Vista 64
  Quad Xeon 5420 2.5 ghz
  250 GB drive C
  750 GB drive D
  1.5 TB Raid 1

  GTX 260
  4 GB OF RAM
  ADOBE CS4 Production Premium

  I wanted to take full advantage of cuda

  There is really not much of advantage again.  You go and go to ATI.

• Unable to choose Photos in the desktop and screensaver Control Panel

  I needed to do a clean install of my system and I had to manually copy the file the backup Photos in the pictures folder.

  Everything works fine on the Photos to... All the albums I created are there, etc., but within the desktop & screen saver control panel, I can not select the library, or Moments, Collections, years, etc., for the office or the screen saver.

  Does anyone have any suggestions?

  Have you fact your library the library system yet.