Dependencies missing cRIO due to legacy

Similar Questions

• cRIO compiling code another start-up

  Hi, I compiled (build start-up) a standalone application on cRIO and it works well.

  Now when I plug the Ethernet cable into the cRIO to connect to cRIO to remove the previous application and build another, I can not connect to the cRIO due to the following error.

  I was wondering how to solve.

  

  First steps - confirmed that the networking for the cRIO is still correct? When you plug the ethernet cable, you can test the cRIO (command line)? You see the cRIO able and Automation Explorer? If you can't access it at all, then there is a network problem. Check your IP address and the firewall settings.

  The cRIO has a set of DIP switches, which disables any startup application. If you set this switch, and then reboot the cRIO, you can then connect? If so, there might be a problem with your startup application - perhaps you have a loop with no wait which prevents background networking tasks to run (like allowing connections in the development environment).

• SQLJMSAdmin module to load missing error

  Hi all

  We modernize our applications to atg11.1 and when the servers running, we get the following exception at startup.

  We have included the SQLJMSAdmin module in our ear. We have also tried to run the CRS11.1 and also its giving the same exception with only OOB modules.

  JBAS014775: New dependencies missing/dissatisfied :
  service jboss.deployment.subunit. «"" "APPEAR.ear". "ejbModule.jar".deploymentCompleteService (lack of) dependants: [service jboss.deployment.unit.»»» APPEAR.ear ".
  deploymentCompleteService]
  jboss.naming.context.java.comp.APPEAR.ejbModule.DMSAdmin (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.DMSAdmin.V
  alidatorFactory, jboss.naming.context.java.comp.APPEAR.ejbModule.DMSAdmin.Validator of service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.DMSClient (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.DMSClient
  . Validator, jboss.naming.context.java.comp.APPEAR.ejbModule.DMSClient.ValidatorFactory service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.DMSMessage (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.DMSMessa
  GE. ValidatorFactory, jboss.naming.context.java.comp.APPEAR.ejbModule.DMSMessage.Validator service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.DMSMessageProperty (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.
  DMSMessageProperty.Validator, jboss.naming.context.java.comp.APPEAR.ejbModule.DMSMessageProperty.ValidatorFactory of service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.DMSQueue (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.DMSQueue.V
  alidatorFactory, jboss.naming.context.java.comp.APPEAR.ejbModule.DMSQueue.Validator of service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.DMSQueueEntry (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.DMSQu
  eueEntry.Validator, jboss.naming.context.java.comp.APPEAR.ejbModule.DMSQueueEntry.ValidatorFactory of service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.DMSTopic (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.DMSTopic.V
  alidator, jboss.naming.context.java.comp.APPEAR.ejbModule.DMSTopic.ValidatorFactory of service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.DMSTopicEntry (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.DMSTo
  picEntry.ValidatorFactory, jboss.naming.context.java.comp.APPEAR.ejbModule.DMSTopicEntry.Validator of service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.DMSTopicSubscription (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModul
  e.DMSTopicSubscription.Validator, jboss.naming.context.java.comp.APPEAR.ejbModule.DMSTopicSubscription.ValidatorFactory of service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy2 (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy2.Valid
  atorFactory, jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy2.Validator of service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy3 (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy3.Valid
  atorFactory, jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy3.Validator of service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy4 (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy4.Valid
  Ator, jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy4.ValidatorFactory service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy5 (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy5.Valid
  atorFactory, jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy5.Validator of service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy6 (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy6.Valid
  Ator, jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy6.ValidatorFactory service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy7 (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy7.Valid
  Ator, jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy7.ValidatorFactory service]
  jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy8 (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy8.Valid
  Ator, jboss.naming.context.java.comp.APPEAR.ejbModule.Dummy8.ValidatorFactory service]
  JBoss.naming.context.Java.JBoss.resources.JDBC.DataSource (absent) to service load: [service jboss.naming.context.java.comp.APPEAR.idgenEjb.IdGenerato
  r.env.JDBC.DataSource]

  14:39:31, 931 INFO [org.jboss.as] (start Thread controller) JBAS015961: management interface Http listen on http://127.0.0.1:9990 / management
  14:39:31, 931 INFO [org.jboss.as] (start Thread controller) JBAS015951: console administration listening on http://127.0.0.1:9990
  14:39:31, 931 ERROR [org.jboss.as] (start Thread controller) JBAS015875: JBoss EAP 6.1.0.GA (such AS 7.2.0.Final - redhat-8) started (with errors) in 77919ms - started 2

  Just to update everyone. There is some compatibility issue with JBOSS6.1 with ATG11.1 SQLJMSAdmin module, the module being SQLJMSAdmin should therefore be updated.

  Our problem solved by adding the search following in the ejb - jar ejbmodule.ear and idgenejb.ear file name. You will need to update the name of the search everything that your base schema name.

  Datasource/JDBC

  javax.sql.DataSource

  Container

  Shareable

  name of the search > java: / ATGProductionDS >

  Thank you

• HP Elitebook 850 G1 - Upgrate to Win Pro 8

  Hello

  is anyone of you know how to access and activate the pre-installed Win 8 Pro on the HP Elitebook 850 G1.

  I just got my new machine today. It should come with both win 8 Pro & Win 7 Pro pre-installed on the internal 500 GB HD.

  When you first start the Win 7 Pro was not the only OS available. Inside of WIn 7, I only see a 0 466 GB and 4 partitions:

  1. 1 GB system

  2. (C) GB 450,17 (healthy: boot, page file, crash dump, primary Partition)

  3 HD_recovery (D) 12.58 GB

  4 HP_tools (E) 2 GB

  Thus, at least 30 GB are missing, hidden somewhere.

  Even on DVD media with 8 Win which accompanies the machine is indicated that the SW is already installed...

  In addition, it seems that startup BIOS only offers the ability to mount the internal HD and network operating system. It dows do not allow for the start of an external DVD (the machine is supplied without internal optical drives)...

  BIOS version is L71 worm 01.04, dated 09/10/2013.

  Any help?

  Thank you!

  The Microsoft Windows 8 Pro license allows only an OS installed both... Windows 8 Pro or Windows 7 Pro, but not both. The DVD included with your computer, this is how you install Windows 8 Pro on your computer. Please make sure you create your Windows 7 Pro HP Recovery Media staff before installing Windows 8 Pro. The DVD of Windows 8 says "The SW is already installed" because it would be normally installed if the computer did not have the lower upgrade Windows 7 Pro installed.

  There is no 30 GB hidden or missing hard disk of 500 GB. The approximately 30 GB you think are missing is due to differences in the way that hard drive manufacturers and Microsoft calculate the hard space. Manufacturers use decimal (base 10) and Microsoft uses binary (base 2). 1000 x 1000 x 1000 = 1, 000, 000, 000 in 1024 x 1024 x 1024 = 1, 073, 741, 824... 1000000000/1073741824 = 0.931... 500 * 0.931 = 465,65... 465.6 - 1-450, 17-12, 58-2 = ZERO

  Please see on UEFI and the Boot Menu for more information as to why the BIOS/Start Menu list only a limited number of devices to boot. It is a usually the result of "Secure Boot" or "Legacy Support". You will perhaps ENABLE "Secure Boot" and maybe "Legacy Support" boot from a USB Flash drive or DVD USB drive.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• I can't remove the listing from my windows 7 64 bit uninstaller list foxytunes - when I try Firefox doesn't close 100% until I have use the resource monitor.

  FoxyTunes is long gone, but the list is not going to disappear. I used Safe Mode to remove the offending registry keys possible. I tried using the Microsoft tool for this, but do not '28 character code' for Foxy Tunes. I would like this list missing, especially due to the fact that to try to remove Firefox "misbehave." If it is too obsessive INYHO, please tell. Also you could provide the code for 28 character for Foxytunes, I could try the Microsoft tool.

  Problem solved! At a Microsoft forum, a competent contributor recommended theRevo Uninstaller program. It worked perfectly. One caveat - it allows the user to remove registry keys. It must be checked in a box, so there will be no inadverdent mistake, but those who have not worked in the registry keys must be very careful

• Problem writing data analog and entry of informed

  Hi, I created a labview program that acquires 3 analog inputs (2 current and 1 tension), encoder out of whack angle and 4 temporary sensors. The Analogue inputs record against lunatics of an engine angle, once the engine has reached the point dead high simulateously in a single file. In another temperature record since signals file they are a lower sampling rate. Both files at the same time record by using the structure of flat sequence to the duration of the pulse encoder TDC events. The program works well with simultaneous recording.

  However, I believe that in the file of analog inputs, the current readings are by crank angle but channel voltage readings are not. There a lot of zeroes inbetween pressure readings as if DAQ is not intervene for the tension. I can't understand why my program does that because the analog all the readings are in the same time of the sample and analog read the task.

  I tried a program separate labview using only express DAQ and have the same 3 channels and saves the data in a file of lvm - it works even at the same pace. I do not wish to use Express functions in my program since fast flow and writing, he will miss values due to the explicit functions opening and closing of files (explicit writable) and creating the same physical channel (in daq express).

  Please can someone help?

  I have attached my program and a sample file entry.

  Thank you very much

  Notay

  I think your problem is that you are indexing column 2 for voltage instead of rank 2. That's why you have only three elements in this table in the cluster.

• Operation of moving off to another folder. Files disappeared.

  Greetings,

  I am desperately looking for help with the missing files due to the command prompt in windows XP.

  I tried to copy the "My documents" folder to a new folder on an external hard drive. I tried to drag and drop the file, but it only stuck a shortcut. Then I tried to copy and paste, but there was no option to paste.

  The size of the file I was trying to move was about 7 GB of data.
  After not being not able to do either drag and drop and copy and paste, I then tried to use the "Move" operation When I clicked on 'move', he opened a dialog box advising me that files of origin at the original location would go to the new location.
  Is more willing to make these methods, I clicked Cancel.

  I was going to try and copy and paste again.

  When I visited the original folder to view its contents, it contains 3 records than usual that is bundled with windows, 'My music', 'My Photos' and 'my videos '. My own folders and files have disappeared.
  I went back to the records and performed the "Undo" action but nothing came. I visited the bin, but the only files that are there, are those that I deleted before trying to move the original folder. Inside the trash can, I clicked to see if he would give me the possibility of "Undo Move" (I also did this in the original folder and the new folder that I did), but he had no other choice.

  As usual, these files are important to seriously and I need them back.

  Thanks in advance to anyone who can help you.

  Hello

  Have you checked the external hard drive?  Sometimes, it takes a while for the file to display.

  Try the system restore to the date and time before you moved the file.

  http://Windows.Microsoft.com/en-us/Windows/what-is-system-restore#1TC=Windows-7

  Or, follow the steps in karena R

• Blurry text in the device as well as some other applications Manager.

  My system is an Alienware 15 R2 with graphics of 970 m.

  Initially, I was using the "display driver uninstaller" tool for cleaning re instillation of nvidea drivers because I had some display problems with older games. (Now I know that the program was not necessary)

  Then the display of all my programs are vague and very difficult to read. I tried another reinstall by using the display driver uninstall, but it crashed when rebooting in safe mode.

  Windows 10 required a soft & after instillation who did I had the same problems of blurred text.

  Technical support advised me to change the DPI scale

  www.tenforums.com/.../5990-DPI-scaling-level-displays-change-Windows-10-a.html

  & to change the plain text display

  www.tenforums.com/.../5990-DPI-scaling-level-displays-change-Windows-10-a.html

  It didn't work, but the strange thing is that a windows update fixed the problems for some programs, but not all. Steam & Google display correctly but Revit, Auto Cad & for some strange reason, my device manager are blurred.

  Here are a few screenshots to help diagnose the problem

  

  Tech support recommended 10 to win an ANOTHER re instillation, but I don't see how this could help.

  All of the Suggestions.

  Tesla1856

  Iczel

  Hi - I recently got my XPS13 version QHD (9350). The first thing I noticed that was blurry Device Manager as OP. Some windows are also very small. I need almost a magnifying glass to read. Y at - it any resolution to this?

  Of course, the appropriate display drivers must be installed correctly.

  In the Control Panel, set the display resolution to the (full) native resolution of the display panel. Who takes care of the "fuzzy". Always leave it like that.

  To provide superior, do you it in a different place. You can adjust the scale to the top of 100%.

  Oh, go ahead. Read the messages the wire, this is not a driver problem, making the scale or resolution. The blur is due to legacy applications not scaling properly, that's why the Device Manager seems to blur, but not the modern control panel interfaces (metro).

• Calendar sync blackBerry Smartphones Troulble after update 9650 6.0 Bundle Verizon 3084

  Hello. I sought a solution on the forums without success. This problem is in progress for about a month... I tried many things (specify below) and I'm back to the original problem. I'm not particularly talented computer, just an educated consumer.

  About a month ago, I was invited to upgrade the software and I said yes. I backup and synchronize at least once a week. When I tried to sync after the upgrade (I do the calendar entries on my BB and the laptop), there was this an appointment, which previously had been an element of a recurring appointment and this occurrence (5/22) has been removed from the BB and laptop. Initializes the synchronization, goes through the process, and then it stops and says that there is a conflict with this nomination (5/22) and it should be deleted, and then Resync. The appointment went from two devices. I even deleted the series the same theing arrives, and this prevents the synchronization.

  After this first happened, I got the forums looking for a solution. I spent almost a whole weekend in doing so. I found myself almost my entire calendar of wiping. These are the things I've done: print the last 2 years on paper, battery pull, uninstall and reinstall the desktop software, cleaning restart (IE clean the phone), upgrade to the previous version of the software (after that you can't do anything, so I had to update again), deleted the CICAL service book.

  Along the process, that appeared a new calendar, one I call the Green calendar (the default is blue). Green was the name of my yahoo email address, although I've never used the calendar yahoo.com and none of my entries appear. So, I had a calendar of green and blue. With my old BB it happened once and I went to the Verizon store and the guy has just selected the calendar and deleted. This time I tried and it was not an option. I went to the Verizon store and they tried, too and says that with the new upgrade, it is impossible to separate the Green calendar.

  Then, I deleted for the Green calendar CICAL service book. When I tried to synchronize this appointment ghost today (5/22) is back and preventing me from synchronization.

  I have the impression that the new update is the problem. I'm stuck and paranoid about missing appointments due to the problem of synchronization. I am a surgeon and work in different practices in different days, and I hate having to keep the call ("' it's Mr. Smith, my Blackberry is messed up again... could you please tell me what time I start tomorrow? '"). In addition, I rely on my calendar to follow where I work for purposes of tax/mileage. In addition, almost all before 2010 was erased. I'm not too worried about that now because I think I can recover an older backup and then synchronize when I can sync again.

  Help, please. It is very difficult to be faithful to the RIM when they are so frickin stupid. This question has plagued my whole summer. Thanks in advance for your help.

  My guess is that there is a corruption of the data on the BlackBerry, I hope that in this instance.

  What you will synchronize with Outlook? If so, I copy the PST file to another folder for backup before troubleshooting. But whatever you do, save the calendar if you can.

  Also back up the BlackBerry.

  Now, to solve the problems. I would like to use the Desktop Manager to remove the database calendar on the BlackBerry and then re-sync Outlook (or other) for the BlackBerry. See if it works.

  Also, FYI, you will have a calendar on the BlackBerry for email address. The default value is determined by the default services settings in the device options.

• Windows 7 Pro repairs hard disk errors

  My hard drive had errors and corrupt sectors.  I ran the tool to fix my hard drive and now need to repair the operating system.  I am running windows 7 pro legal copy of course as always.  What is the best way to repair windows 7 without having to redo my computer everything and start again.  I know that there are some missing files due to hard disk errors because strange things are happening now and some things do not work properly.

  E-mail address is removed from the privacy *.

  Trevor Walsh

  Try to repair the Installation of Windows 7

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. click on the link to repair list system in the System Recovery Options recovery tools.

  More information and a how to guide:
  http://pcsupport.about.com/od/toolsofthetrade/SS/Windows-7-startup-repair.htm

  If this does not solve it:

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
   
  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD

  Note: there is a space before the /.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• BB Bold 9700 Smartphones BlackBerry alarm Please HELP :(

  I set the alarm and switched off the phone.

  The phone turns on the alarm time but I have emails coming through and they always stop the alarm ringing.  I see that the alarm lights up as he said to reject or Snooze, but there is never any sound.

  If I have any e-mails that traverse the alarm sounds as I tested it during the day.

  Please can you help me get the alarm goes off even when I have emails coming through the phone?

  The audible alarm should substitute the emails.

  This is my first BB and not had it long before I left on vacation... I almost missed flights due to the alarm does not sound not... it NEVER happened to me with Nokia...

  PS I'm not a BB teccy so answers in step by step please

  Thank you

  Hey,.

  Yes, you need to hit Menu > bedside enter Mode each time that you configure the alarm and sleep. Just one condition to get a good nites sleep

  with regard to the parameters:

  Disable the LED = disables the annoying flashing when you get a notifcation = YES

  Disable the Radio = rounds out of your connection to the world your choice = I put it or not

  = Reduced the brightness of your display screen dims = YES

  His profile = all alerts Off no = no sounds

  Hope that helps!

• forms of Oracle 12 c report queue does not

  Dear Sir.

  I installed oracle 12 c m forms using the oracle base.  everything works fine when I open the report queued it throws error as "REP-52266: the current report server rep_wls_reports_roadmap is not start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0.

  Please do the need ful

  Try this below and check this thread 12 c Oracle generator not opening

  REP-51019: System user authentication is missing. is due to the configuration in the following files.

  Just follow the steps below.

  (1) add lines below in the file rwservlet.properties

  my_server1                   <-------------------- your="" server="">

  None

  Yes

  L2

  Remove 2) or a comment to the below lines in your rwserver.conf

  and

  remove the safety label of

  TO

  (3) allow access to the files in rwserver.conf

  C:\Users\Desktop; C:\Oracle\Middleware\Oracle_Home\reports

  C:\Users\Desktop; C:\Oracle\Middleware\Oracle_Home\reports

• find my drive

  I can see my thumb nails, but when I try to use their ambient light tells me that it cannot find the file now records are kept on disk F and there is not a green light by the F drive

  in the bright room, but if I search my computer, the drive is it helps.

  This is caused by disconnecting an external drive and then reconnect the drive with another attached USB mass storage device (telephone USB Thumb Drive, etc.). I suggest to assign the letter M: or higher on the external drive to prevent this from happening in the future. Please see the next post to solve this problem:

  Lightroom: Missing Images due to the drive name change on PC | Community customer Photoshop family

• Oracle DBA jobs

  Hi all
  
  Please don't mind my question if I violated the purpose of the forum and if yes, then I am truly sorry.
  
  I work since nearly 3.4 years in Oracle Database Administration. I mainly worked on Dev-Test platforms where we keep no interruption of service. I don't have the hands on the CARS or a lot of knowledge. I worked on 10g, 11g.
  I know that the concepts and methods of implementation of data keep (Eve), I worked on RMAN (duplication and incremental backup, complete/incomplete recovery), expdp/impdp and exp/imp, small amount of (SQL/Shell), database server management scripts (for the most part have exp on Linux), Installation of RDBMS/ASM, Databases(manually/DBCA), Security(privs,roles,auditing), Tablespace and other management staff of logical structure , HOT backup, cold backup (and restore from it), database upgradation, patch (PSU, a one-off, attach/detach from stocks), tracing, SQL Loader, ensure monitoring and creation, database monitoring and maintenance, segment management and defragmentation, maintenance of database object, Configuration of OEM etc., manipulation of the different types of Oracle, including critical errors errors like 600,7445 etc... Read and extract the AWR/ASH...
  
  Can I get a job outside of my current company? As I don't see a lot of growth there. Not even happen to have exposure to other platforms... Most businesses want personal CARS.
  
  Please suggest and help me (if possible)... I am really in tension on what will be there in my future because here I will never get to work on the CARS and the architecture of high availability...
  This is the reason why now I think spend my business for better technological growth...
  Should what I know in this phase of my career. pls suggest... I am from INDIA
  
  -Looks
  DBA struggling

  If you get another job is a completely local issue. Ask a local recruiter how the job market is for the DBA. In my region (the United States), it seems that there are a decent amount of demand for the DBAs, but you could work in a local economy that is stagnant.

  Chances are, in 2013, that any new DBA job will involve some element of redundancy of data.

  In a few years, I suspect that most of the places will be CARS or Exadata systems for their critical databases. It will probably be a major breakdown before most companies will spend the money for clustered systems, but eventually, they will be included like that. Same Oracle Database Machine is a RAC configuration if you think about it - and that's what they're trying to plant smaller customers.

  I remember about 10 years ago CARS was rare (I remember installing RAC 9.2.0.1 for a customer - boy, which was DIFFICULT). 'All' that you must do to be a DBA then, was to understand things from single instance.

  Five years later, most DBA needs to know about RAC/ASM/data Gurd if they wanted to be Production DBA - they had to understand specific, cluster, ASM and Data Guard stuff.

  I can see that in a few years, DBAs must be competent in Exadata or similar - so they will need to understand specific, cluster, ASM, Data Guard AND Exadata stuff (networking, storage cells, etc.).

  My point is that the DBA role changing faster than any tech specialty. Fortunately, Oracle makes things easier to administer the technologies we have to master to become more complex: I can testify how difficult 9.2.0.1 was put in place for CARS - management of a system of 11.2 is so MUCH more enjoyable!

  Unless you work in a place that have no plan to upgrade their databases (due to legacy systems) and to grow as a business, then chances are that you will be finally exposed to what you are looking for. Of course, if you work in a place like this, then we could suggest you better find somewhere else to work. Stand still must be turned towards the back, etc...

  Good luck. It is good to be ambitious, but don't forget that a DBA role is a this experience absolutely request - if you have 3 years to be a Production DBA and having to call this in the middle of the night, you probably better experience than someone who spent 6 years as a development DBA (IMO).

  Mark

• Help with Ora-19046: Out-of-table row cannot be shared by two top-level tab

  Hello!
  My tutor asked me to store and query xml "natively" files in xml db. First, I tried to save the patterns that rely on these xml files. There are about 30 patterns thus between them, and I have to use 'FORCE' them to save, like this:
  
  BEGIN
  () DBMS_XMLSCHEMA.registerSchema
  "http://www.isotc211.org/gmd/metadataEntity.xsd,"
  BFILENAME ('ISOGMD', 'metadataEntity.xsd'),
  TRUE,
  TRUE,
  FAKE,
  TRUE,
  (TRUE);
  END;
  
  So no tables are created automatically. And when I wanted to create a XML based on patterns of thses manually, he proped error: ORA-19046: Out-of-table row cannot be shared by two top-level tab. He mistook me for a week. Does anyone know what is the problem with registration? Forward online! Thank you!

  Maybe you're missing type due to the DeffaultTable = ""-xdb:annotation "
  Try to understand it with the trace file that will be created if you set

  ALTER SESSION SET EVENTS = '31098 TRACE NAME CONTEXT FOREVER'