Wireless mouse works intermittently

Similar Questions

• My wireless mouse works fine everywhere except in Mail. It is simply not to scroll or work at all.

  My wireless mouse works fine in all applications except Mail, where it does not at all. It is altogether we els and absent when I try to use it either as a pointer to a specific e-mail or use it to scroll. It simply is not there. What gives?

  Please could you tell us what operating system you are using.   It isn't iOS with an iMac.

• my wireless mouse works system restore not tried, but he did not correctly run because of an unspecifed error

  my wireless mouse works system restore not tried, but he did not correctly run because of an unspecifed error

  [Moved from comments]

  Hello

  1 Windows operating system is installed on the computer?

  2. What is the brand and model of the mouse?

  3. What is the exact problem that you are facing with the wireless mouse?

  Method 1:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-za/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Update mouse drivers and check:

  Reference:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  If you use a Microsoft mouse, then follow the steps in the article:

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122#top

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Microsoft Wireless Keyboard 800 & 1000 mouse, work intermittently when connected to my new PC, but work very well on my laptop also under win7

  I recently got a new PC and my wireless keyboard and mouse combo made by Microsoft have not worked properly on my new computer. Sometimes, they work fine then other times it's like the keyboard and mouse cuts in and out, make miss me not type letters or the mouse past on the screen. They work fine on my old laptop that runs windows 7 as well. I reinstalled the drivers with those newer. I disconnected all my other stuff without wire and the problem persists. I plugged into different USB ports. I'm only a 1 m from the PC. I have no idea wat the problem would be, but I can assure you that keyboard and mouse work perfectly on my laptop.

  Thanks for any help

  Hi Sean89dunn,

  Method 1
  I suggest you try the steps from the following links:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  Method 2
  If the steps above fail, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• My wireless mouse works perfectly on the login screen, but after booting will work only in 6 inches of the receiver, ideas why?

  I have a Logitech Cordless mouse click on more, I used it for 3 years and more without problem, but the last two days, it will not work properly once my pc has initialization completed, while I see quite a number of things may stop working all together the thing extremely limited scope baffled me. I have not made any hardware changes recently and uninstalled the last 2 bits of software I installed [Lego Indiana Jones and update Adobe Reader] but no difference, another wireless mouse [Technika 2.4 ghz tknm110, cheap and nasty, but does the job] works very well. Any ideas what could cause this and how to fix] would be appreciated.

  Hello

  1. What is the mouse model number?

  2 have you checked Logitech mouse in another computer with the receiver?

   
  3. using Bluetooth or USB or a wireless mouse?
   
  Method 1: Run the troubleshooter of material and see if it helps

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  Method 2: Clean boot
  Put the computer to boot and search for the issue.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, follow step 7 article to put your computer to normal startup.
   
  
  Method 3: uninstall and reinstall the latest drivers for your mouse logitech
  It seems that your logitech mouse driver is corrupt. Before you install the latest drivers for your logitech mouse, I suggest to uninstall the existing drivers completely, including any software of logitech.
  
  Note: You can use the functions of your keyboard to re - install the drivers for your mouse once you completely uninstall the current drivers.
  a. click Start; in the start search, type devmgmt.msc and press ENTER.
  
  b. develop component driver mouse.
  
  c. right-click on the component of the mouse, and click Uninstall.
  Download the drivers on the Logitech website:
  http://www.Logitech.com/en-us/mice-pointers
  I hope this helps.

• The mouse works intermittently

  Original title:

  Why my mouse clings?

  Sometimes the mouse pointer jumps and sticks

  As pointed out in other replies, which is the brand, type of mouse?

  What is a wireless mouse? If so, check the batteries.

  Also try the troubleshooting link. Install the appropriate drivers.

• Satellite Pro 300 L. Wireless only works intermittently

  I have updated all drivers wireless on the laptop. It is running Vista and all updates have been applied.

  Wireless continues to stop intermittently. He doent loses the connection with the access point but ping fails, where another computer attached to the same access point works very well. I ran pc live version of linux on the laptop operating system and it remains connected without problem. There SEEMS to be something windows / vista related but I'm not sure of that. I did not check the bios to see if there's a updtae, do not know if this can help, but we saw it.

  Sometimes its worse than others and a fact of unpacking of 'possible' thing is worse when there is a higher load of traffic through the adapter as a download. The same tested in installing linux and he continued to work without problems.

  Advice appreciated ideas.

  Thank you

  Hello

  It is not easy to say what the problem is here but let's start with Toshiba FAQs - http://aps2.toshiba-tro.de/kb0/FAQ7A01ZX0008R01.htm

  For more help please post again.

• Wireless connection works intermittently

  My connection with my BT home hub wireless keeps defaults to "local access only".   When I contacted BT, they do not have to fix it by using remote access to my computer (I have an ethernet connection that disturbs that works).  They say it must be the fault of VISTA and that it is a common problem with VISTA users.  I have an old Windows XP Home Edition which I use is no longer on the desktop, with which it was supplied.  Should I uninstall my Windows Vista and install the old edition of XP?  Or is there another solution?

  Hello

  I have a lot of computers running Vista and they have no problem connecting with wire (I'm not a lucky guy, there are millions more just lucky that I am).

  That said, this does not mean that you are not specific to a problem involves the configuration of your computer. But this isn't a general problem as «Vista cannot do well with wireless»

  Check the IP address of the wireless card and you will probably find that it is 169.xx.xxx.xx, or another no functional IP.

  Your wireless card is probably not really connected to the BT wireless unit and therefore without Internet.  Thus, the people of BT can nothing remotely and shift the burden elsewhere.

  I'm not familiar with BT devices. In my neck "in the Woods" all roads wireless also have the ability to connect with a wire.

  Then I begin to establish a connection with a wire (it is much simpler than wireless. When everything works as it should you have a frame of reference that help to take care of the radio.

  Jack, MVP-Networking. EZLAN.NET

• Wireless mouse doesn't work sometimes on windows 8

  Wireless mouse works on the new Sony Vaio windows 8 during a few days and then is not a day without apparent reason, except perhaps due to frequent updates of Windowes.  Then, it is very difficult to operate again to add device because existing mouse icon fail to remove.  How to stop this nightmare?

  What is the brand and model of your mouse.

• Wireless mouse stops screensaver to run on Windows XP Professional

  I have a Dell Optiplex 745 with Windows XP Professional SP3 and Pentium D 820, 3 GB DDR2.  When I have a wired mouse to the system, the screen saver works very well.  However, when I use a wireless Microsoft Mouse (instead of the wired mouse) the screen saver does not (the work of the SS preview).  It fails to load up after the required period of time - that this either 1, 3, 5, 10, 15 minutes - no matter how long I put it for)

  How can I get the screensaver to work when the wireless mouse is connected?  (The same weight of wireless mouse works fine on Windows 7 and Windows Vista).

  I found the problem.  I just need to update the driver.  I have although it updated automatically, but I went to control panel - system - hardware - devices - human interface devices Manager - clicked on each of the three eevices who presented themselves separately - then clicked pilot then put to update driver.  I don't know who has been to the mouse but two could not be updated, and you could.  I guess it was that of the mouse, because it works now.

• Microsoft 2000 not recognized wireless mouse - code 43

  wireless mouse worked for 4 days - so not recognized and recommended to change the device - problem with the code 43 - it is brand new - 2000 microsoft wireless mouse.

  It's the same thing with my previous microsoft mouse.

  I am so frustrated with this - strangely, I bought a wired mouse to my local supermarket (Asda) for £6 and it works perfectly.

  Hello

  Run the troubleshooter from the link below and check if it will help: hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us

  You can also try the steps listed in the link below: troubleshooting failures in the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

• My 2000 wireless optical mouse scroll wheel works intermittently-"mouse sigal is low."

  Original title: my 2000 optical wireless mouse scroll wheel works intermittently

  I recently bought a set of wireless with an optical mouse wireless 2000, office 100 wireless keyboard and a wireless desktop kit 3.1 receiver. After you have installed the drivers and the Intellitype/point than roulette software of the mouse does not work all the time, for example after clicking on my way in a 80 page PDF manual and long Web page that the wheel seems to not work in one direction, then the other way won't work. I tried new batteries, latest driver bouquet of microsoft site (intellipoint 8.01) moving to the receiver or away to "signal low mouse." Today, however, the mouse is 2-3 feet away from the receiver and it keeps popping up saying ' the mouse sigal is low you want to start the troubleshooter? Yes, I tried this and tried to move the USB without success. Can someone HELP please... Tired of drag and drop

  Same problem here, but I found a way to make this work (in fact there are two ways LOL)

  -Remove one of the batteries.  Believe it or not, the scroll wheel works perfectly when I remove one of the battery (any).  However, I do not know how long it will last since there isn't that one battery in operation.

  OR

  -Remove the lid of dough and remove the batteries.  Use a screwdriver to loosen the screw about 2 rounds (for some reason, I think that it is screwed in too tight).  Replace the batteries and you are or that you set.

  I can't guarantee that my methods will still work, but the fact is that it works for me since then.

• Pro L10: After using a wireless mouse, the touch pad has stopped working

  Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

  I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

  Can you help me?

  Hello

  It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
  I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
  I guess that you are having regular problems with a USB mouse.

• Logitech M705 wireless mouse no longer scrolls in the firefox of office currently using FF 40.0.2 it works in mail electronics thunderbird.

  Hi, I use a Logitech M705 wireless mouse. I'm more capable scrolling on my desktop version of Firefox. Version 40.0.2 ff. However, the scroll feature continues to work in the latest version of Thunderbird. He works also on windows games ie. Solitaire, maj jong.

  Thank you

  Hi sc2137,
  This happens for all sites?
  Please first try to start Firefox in Mode safe. Questions to troubleshoot Firefox in Safe Mode

• HP laptop: wireless mouse does not work

  After mobile update on oct 6th wireless mouse is not working.when I am looking for in the receiver 2.4 g device is here.

  I did a hard reset but it does not. The mouse is iball freego 2.4 g wireless optical mouse

  and even when I went to download a software to reinforce the msg me: "We have couldn't retrieve the list of drivers for your product." Help out me

  dhruvil28

  Hello;
  
  Let me welcome you on the HP forums!

  Sorry, but if your talk to get the mouse drivers from HP, what's not at work, such as HP does not include drivers for the hardware not HP.

  Have you tried to download the drivers from the manufacturer of the mouse?

  You must go to the settings, update & Security-> Windows Update.

  Then, choose Advanced-> history to see when the updates have been applied last. If you see one that include device drivers, who might be the problem. So, if you can, you should see if you can restore the drivers that are causing the problem. Do so you by going into Device Manager, see if the device is still listed and so, trying to restore the last driver update.

  And if this resolves the problem, then disable future driver updates by using the information in the link: http://www.tenforums.com/tutorials/48277-driver-updates-windows-update-enable-disable-windows-10-a.html

  If the appropriate device adapter is no longer present in the Device Manager, what MIGHT work is something known as a repair installation. It is less destructive of all Windows recovery features and rewrites the Windows system files, leaving your apps, settings and data intact.
  
  To do this, you will need to use the link to the installation media to download Win10 and burn a DVD or create a USB key: http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install?ocid=ms_wol_win10
  
  Once you have, follow the instructions in the link: http://www.tenforums.com/tutorials/16397-repair-install-windows-10-place-upgrade.html

  Good luck