Deploy the Wyse Image via PXE on WDS

Similar Questions

• The Portege 2000 via PXE - LAN operating system reinstallation

  Hello again,

  So as said before I'm trying to reinstall Win XP from the recovery provided CD.
  In fact, I have 4 CD: one that contains only Windows 2000 Pro and 3 CD containing Windows 2000 and Windows XP Pro. Of course, the 4 CDs were shipped with the computer.

  I tried via the floppy and CD-ROM drive that does not work (see previous section), but I also tried via PXE - LAN.
  So I installed a trial version of Windows Server 2003 in 3 months on my desktop and ran the RIS (Remote Installation Service).

  1. He accepted the CD Windows 2000 Professional as a CD of Windows Setup, but when you launch the Portege 2000, after some time, when he looks for the configuration of the computer, I get an error message that the driver for the network card is missing and it may not all go further.

  2. when I run the installation remotely with CD 1 of 3, it does not even recognize as a Windows CD of Installation!

  So, I managed to install a Win XP Family Edition that I run normally on my desktop, but I don't have any driver installed (WIFI, infrared, sound card, etc.) but also, I have only 1 license for the home edition.

  Someone at - it an idea on how to proceed with this method (I mean with the 3 CDs)?

  Thank you very much.

  Hello

  > Has anyone at - it an idea on how to proceed with this method - I mean with the 3 CD
  Do you mean the Toshiba recovery CD?

  I never tried to recover the image of Toshiba via RIS, but in my opinion that RIS does not recognize the 3 as a Windows CD of Installation CD1 because the recovery CD Toshiba image isn't really a Windows CD of Installation!

  The restore CD contains only the image files. To my knowledge these are ghost files

• HP T610 more: HPDM deployment for t610 image more crashes during the installation of the new initial start of the image

  We are working on the update of our thin clients HP T610 more.  Update us the thin clients in the last image of the OS WES7P and also update to IE11 and Citrix receiver 4.4.

  We use HPDM 4.6.4

  We have successfully several T610s and update the image of the OS and related software with no problems.  We are then able to use the 4.6.4 to successfully shoot HPDM and image of these thin clients updated in the master repository.

  We then create a task to deploy the new image to several thin clients.  We configure the task to use the imagery being cached, and then run the task.  HPDM then successfully deploys the image for thin clients.

  Customers accept the image cache and once the image is fully downloaded they restart to deploy the image.   After the restart, the image unfolds and decompresses correctly, then the thin client, start the original installation of Windows.

  But for 90% or more of these newly imaged thin clients that they get hung up during the installation of Windows (usually during the message that windows is written to the Registry).  Once the thin clients get hung at this stage they are inaccessible and unrecoverable by HPDM and must be copied via USB.

  We believe that the issue is somehow related monitors are connected to thin clients.  If isolate us completely thin clients monitors, then deploy an image the new image is OK.  HPDM reports that the image has been deployed successfully.  If we then go back to thin clients and reconnect the monitors of the thin client is updated and the screen seems to be in standard vga mode low resolution.  A restart of the thin client then recognizes and sets the appropriate screen resolution, and the thin client is good to go.

  What is normal sound monitors must be separated to deploy a new image?

  Thanks for any idea or thougts.

  From the point of view HPDM, disconnect monitor is not required when you deploy the image. Personal thought is that there is a compatibility problem between the display driver, graphics card and the system. Installing Windows intend to write a default registry value based on connected monitor (maybe display settings), for some reason, he was stuck. I'm not the driver or the operating system that you are an expert, I would say that you submit a ticket to HP for additional troubleshooting.

• rendering image via the script get me uknown messege

  Hi all 2, maybe someone knows and can help me, what means of alert message and why it showing on 2 of my 7 work computers (all PC's have after effects cs5 but why only on two display this message?), when I try to make the current image via my script. My script - rendered the current image in the png file (and at this point after effect a bug and adding numbers 00000 filename so I need to find my rendered file and fix bug of file name and import file back), so when I see this message my script does not work (AE render the file, but the incorrect file name and my script is unable to import it to AE)

  PS to make the current image I create my own preset (with hands) for the output module based on the png sequence

  

  THX

  Hi guys, I understand, the problem in my script make part, first of all I have the code to save the current image

  myProj.renderQueue.item (1) .outputModule (1) mpfprojectdir\dev10\src\csharp\projectbase.file = File (DesktopPath + "\\temp\\" + "_" + myLayerName); and it gives me error, so I fixed this alert message by

  ("myProj.renderQueue.item (1) .outputModule (1) mpfprojectdir\dev10\src\csharp\projectbase.file = File(DesktopPath+"\\1111\\"+"ltp"+"_"+myLayerName+"[###].png ");

  [#] .png - it's a key, thx to all!

• Code error-301 when you deploy the image

  Hello
  I have a problem.

  I want to deploy an image from a client light t5740e to a client t610.

  I cloned successfully of the image to a folder as a file .ibr deposit.
  I also have an older version of the image as a file on a FTP repository .img.

  I can successfully deploy the image the FTP repository to a t610 client.
  The problem is that this image is obsolete and cannot be used.

  When tryng to deploy the image to a file repository shared, I get the following error code:
  2013-04-22 11:38:47 ErrorCode:-301, error information: the device of the faimly bios is not match the image.

  I also tried to create an image using HP ThinState Capture, but recevie the following error during startup:

  Inititializing... * ERROR * system has failed the OS image.

  After that, I downloaded the standard image on the HP site and created a USB key. Then I replaced the .ibr file, but it still gives me the same error as ThinState installation.

  Is there a way to bypass the repository of shared folder and clone the image to the FTP repository under a .img file and deploy it to the client t610?

  Or is it possible to bypass the BIOS checking when deploying the repository of shared folder?

  Assuming that the version HPDM is common (4.5 with SP2), there is an option in the task editor when applying the deployment to enable Cross-platform for Imaging.

  This is however strongly discouraged because the picture you shot of the t5470e will not have the necessary drivers for the t610. The original image on the web site of HP will have drivers for both, but the part of the RunOnce scripts at first start after imaging USB is clean the unnecessary drivers by the platform to maximize space on the device.

  However, you should be able to pull the image of 7th WES using the FTP browser component in menu HPDM model. This will generate a model that can be deployed to clients light t5740e both t610.

  One last thing to remember is to make sure that the agent is updated on the device target before deployment and then again after the deployment.

• Transfer an image via the serial port of PC to PC

  Hello world

  can someone help me to transfer an image file to another PC with Labview via serial port?

  I tried to use the IMAQ functions to decode the image to a string. but there is a problem at the receiving end to retrieve the image.

  is there an easy way to just sent and receive an image via the serial port file?

  Thanking you in advance.

  Morgane

  Hello

  I love people who love to learn. Thanks for listening.

  I updated read and write Subvi is because I believe keeping simple and straight threads more readable program and less bugs remain.

  Even better, my eyes straight lines i do not get tired too soon.

  good luck with your program.

• Deploy the OEM of XP to several PC image

  Hi people,

  I have a Dell PC with XP PRO OEM installed on it. I have another 9 PCs (same model), all of which have their own XP PRO OEM stickers on the side.

  It's ok for me to:
  The first PC from Dell using a freeware tool, imaging image to deploy the image on all other Dell PC, then use the tool from Microsoft to change the product key OEM to that respective on the side of the case, and then reactivate it?

  I must point out that the first Dell does not have a Dell factory install XP, but one that I made myself (using the button on the side of the case and my own XP Pro OEM CD)

  Thank you

  Hi Jonnytabpni,

  Using the sysprep in XP utility, you can deploy the image on several PC. You should have no problem using an OEM installed OS on other OEM computers and enter the product key manually on install. However if you sysprep a key retail and attempt to push than to machines OEM and OEM keys, you will encounter issues.

  I hope this helps. Let us know if you have any additional questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Dell Optiplex 3040 MT - in the BIOS there is no option to select "ATA" for SATA Operation! (Impossible to deploy the Image system Windows 2008 Server in AHCI Mode)

  Dear Experts,

  I am unable to find the "ATA" option in dell optiplex 3040mt. where might not deploy top Windows Server 2008 image.
  In dell 3020 I deploy the image using ATA mode.
   
  Please tell us how to activate the "ATA" option in Optiplex 3040 and install windows server 2008.

  Thank you!

  Jesse There is no option in 3040 because the ATA mode is no longer supported.  F6 drivers are REQUIRED for windows 7, 8 or 10.   XP/VISTA is not supported at all and will not be installed.

  AHCI is the only option available in the modern Bios and chipsets.

  The INTEL RST F6 drivers are REQUIRED for all advanced sector format 4 k drives. Most of all the readers

  https://Downloadcenter.Intel.com/download/25165/

  

• Is there a shortcut key for "Flatten Image"?  I just upgraded to CC and again it is not a shortcut for IT... Ugh.  Someone knows something to flatten the Image via the keyboard?

  Is there a shortcut key for "Flatten Image"?  I just upgraded to CC and again it is not a shortcut for IT... Ugh.  Someone knows something to flatten the Image via the keyboard?

  I've been using Ctrl + Alt + Shift + F for years, don't know if it's a default shortcut, or if I assigned.

  You can create your own sets of shortcuts - Edition > keyboard shortcuts.

• Is it possible to create the icon PDF format display with the cover of the document image, when sending via "Mail" on a mac?

  Is it possible to create the icon PDF format display with the cover of the document image, when sending via "Mail" on a mac?

  InDesign has no control on how Apple Mail displays a PDF it creates.

  My experience is that Mail displays a preview of a single PDF page, but not a multiple page PDF. In addition, for a single page PDF, the user may tip if the PDF shows a preview by right-clicking the icon/preview.

• in lightroom 5, I was importing images via a card reader. Now you can see the images on the computer but when I try to import it says that it cannot read the card of ideas how to fix?

  I was importing images via reader of card without problems. Now, all of a sudden, I can see the images on the screen, but when I try to import the computer says it cannot read and quote the numbers of images. No idea how to fix?

  Please give us the exact error message.

  Please indicate your operating system.

  Please indicate the exact version of Lightroom you use.

  Please give us any other relevant details.

  -What this means: "now, all of a sudden, I can see the images on the screen? You are looking in Lightroom or your operating system or the screen of the device? Where?

• How to deploy the CARS with Image gold

  Hi experts,
  
  Now, we want to deploy CARS using image gold CARS.
  First of all, 2 images have been created since a 10.2 RAC on AIX (1 image clusterware and 1 DB image).
  Then we try to deploy CARS using the procedure "Oracle Clusterware/RAC provisioning for UNIX.
  In the procedure that we select it step "Select Sources", "select Library of software."
  But we cannot find the images we created before in the page "Select the component for Clusterware" or "select the component for CARS.
  So who can tell me how we can create and get these images as sources to continue the deployment procedure.
  
  Thank you very much.

  I found the images that I created can only be seen in the Image tab page. But they can be found in the components tab page.

  Images under Provisioning tab is only used for the Images of the OS (RedHat, OEL etc.).

• Faint images thumbnails next to the photo enlarged via slideshow widget, light box.

  When look at enlarged single for the images in slide show > widget Light Box, a faint image of thumbnails can be seen in the background on each side of the enlarged image when the image is narrow (portrait orientation). They should be hidden by the container of enlarged image, whose filling is black, 100% opacity. The thumbnails are invisible behind the enlarged image itself. This only happens when the cluster of thumbnails is wider than the enlarged image.

  A viewer is a sort of background transparent by default, which covers the rest of the components and highlights the image etc, that opens in the Viewer. This is the default functionality of lightbox.

  The background of the lightbox is the rectangle that contains the image of heroes in Design view. In the browser, this rectangle is expanded to fill the browser window. Open the filler panel, and by default you will see that the fill is black and opaque to 90%. (Note the opacity is about filling.) The opacity of the object is 100 %.) You can change the fill color, opacity, etc. to anything you want.

  Thank you

  Sanjit

• Impossible to mount the persistent drive - trying to deploy the first pool of offices and do not. -View composer agent initialization failed

  Hi all

  Complete errors:

  Discover the State of the agent (22) composer initialization error: cannot mount the persistent drive. Please check the VM parent if an existing drive uses the same drive letter. (expected 0 seconds)

  State matching: matching...

  By:xxx.xxx.xxx.local set up

  Attempted theft by:

  Error commissioning took place for Machine xxx: View Composer agent initialization failed

  I am currently deployment of VMWare view for the first time in a test environment and have hit a problem I have not been able to get around despite several searches on google and trial and error.

  Hoping that someone here could suggest something.

  View the VMWare versions are all 6.0.1.

  vCenter is on a device.

  VMWare view connection manager is on a 2012 R2 VM server.

  VMWare view dial is on a separate server 2012 R2 VM.

  I have a 2012 SQL on a separate server 2012 R2 VM Server installation.

  SQL databases have been set up for the composer to be able to reach it, it uses ODBC 64-bit via SQL Server Native Client 11.0.

  I tried troubleshooting by exchanging 32-bit, but this is not connected, it seems so 64 bit is correct.

  I have a windows 7 64-bit Enterprise Edition VM under my Golden image. There are VMWare tools on it and the VMWare agent on it.

  The virtual ipconfig/release performed top machine, he was then stop and a snapshot taken as my source.

  The problem is that when I go to deploy a pool of offices, I get the above error.

  If I connect to the VM created via vCenter readers persistent and temporary show very well.

  Based on the error, I tried different settings such as change the path for the reader of DVD VMs of D: to Z:, spread unique persistence and the temporary disks on multiple data-stores or data stores and even remove the drive of DVD of VMs completely. I have also looked at newspapers under composer view but find nothing to explain the behavior.

  SQL Server seems to work for configuration through the error logs and virtual machines are created and added to AD as expected.

  I must point out that the virtual machines are as linked clones.

  Can anyone offer a clue as to the cause or something, I can check it please, did everything I can think and Googling the error does not come to the top with something useful so far.

  Thank you

  IF you use an Agent 6.0.2 Please downgrade 6.0.1 agent and let me know the results

• When I open the thumbnail images in another tab they are pixelated, what's the problem?

  When I go to a website with pictures they are pixelated. Placing the cursor over each image the gives me the ability to press 'alt' and 'r' to refresh the image or 'alt' and 'a' and refersh the entire page. When I open an image of thumbnailed in a new tab, if yes or no I refreshed the page or the image beforehand, the image is pixelated and I can not 120 Hz it. What is going on?

  This has happened

  Each time Firefox opened

  Looks like you are using a dial-up with a 'Accelerator' connection If this is the case, it's a feature of this ISP web accelerator. They accelerate the loading by initially providing lower quality images and giving you the option of loading the original image, full resolution in their cache with shortcuts for the page. Other ISPS with a web Accelerator feature using elements of context menu, which are added to Firefox via an extension installed in Firefox.

  Insofar as not having is not able to load the image quality when you open it in a new tab, I don't know why that option does not appear. You must contact your ISP support for questions on this issue.