Deploy to build WebCenter project

Similar Questions

• Is it possible to build a project with Labview 2010 on a Windows XP system, which is useful for a system with windows 7 on it?

  Hello

  I intend to use Labview 2010 in no time.

  But before I go to use it I have a few questions.

  1. I know that it is possible to run Labview 2010 in an XP environment. But is it also possible, when running Labview 2010 on an XP system, to build a project for a version that is useful in a Windows 7 environment?
  2. Or should I run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?

  Please give me some information.

  I hope to hear from you soon.

  Kind regards

  Kenny

  the file (.exe) is also compatible with xp and seven, no need to change anything...

  Concerning

• Can not deploy the build Q10

  Hello. I have difficulties deploying my build for a physical device. It seems to work fine on the Simulator. It is a port from files apk android to a bar file.

  None of these debugging info below seems familiar? No idea why it does not work?

  Thank you

  Kenneth

  Env:

  10.9.2 MacOSX

  Customer 1.1.0.20 | Mix 1.1.0.67

  Command line tools: 2.0.6.201409181326

  feature:

  Q30

  version s/w 10.3.2.2474

  OS: 10.3.2.2639

  Build ID: 857461

  What I tried:

  1 using the BlackBerry deployment tool, I get the error message:

  Error: Failed authentication user
  com.qnx.bbt.deploy.Deploy$ DeployException: error: failed authentication user

  2. via command line tools

  $. / blackberry-deploy - v - installApp-password 1111 - device 169.254.0.1 - package androidapp.bar
  Info: Initialized http client
  Info: Attempt to leave with cookie
  Info: Logging in...
  Info: Response analysis...
  Info: Status of reading...
  Info: Status: success
  Info: Application-Development-Mode is set to false, off sync
  Info: By running the command INSTALL
  Info: Send request: INSTALL
  News: Expired session reset

  A debugging token is not required for the loading of a signed version.  Restart the Q10 help?  You can try deployment WiFi instead of USB?  If it works, try to install the latest version of BlackBerry Link, that will update the USB drivers.

• I have Production Premium with Encore CS6.  I created my first HD project, tested and received no error but when I went to 'Building' my project still on a BluRay disc, I got the error message "ERROR CORE 03".  How do I get this project on a B

  I have Production Premium with Encore CS6.  I created my first HD project, tested and received no error but when I went to 'Building' my project still on a BluRay disc, I got the error message "ERROR CORE 03".  What should I do to get this project on a BluRay disc?

  In response to both Richard & Stan.  I received the error message ""device error", Code '3' notes Create Sequence of STC: cannot write file M25.»  Or something very similar to this, but I think it was exactly that.  It was my first HD project but used several times to make projects sustainable development without problems that were not of my own creation.  So it was a shock and cost me money and the failure to meet a deadline.  What I did: on-screen 'Build '.

  Format: Blu - ray,

  Output: Blu - ray Image,

  Source: Currrent project,

  Destination: I Browse... d a location appropriate.  He managed a Blu - ray image.

  Using reminder once again, step 2 - on-screen 'Build '.

  Format: Blu - ray,

  Released: Blu - ray Disc,

  Source: Disk Image,

  Destination: my disc drive that holds a blank Blu - ray disc.  He managed a Blu - ray disc.

  Then I found a job step 2 autour for the problem.  My question is this: I pay $70.00 / month ca to the people Adobe cloud to keep their software up to date and work as advertised.  I do not think I should spend a few hours and lose money looking for a problem created Adobe not yet keeping cs6, updated and works as promised.  I submit my first bug report.  My suspicion is that adobe considers that Blu - ray is out of style, and they do not care to correct this bug in still cs6.

  I'd love to know the thoughts of others on this.

• How to build the project with library error in adf adf

  Hello

  IM using jdev 11.1.2.3

  in my project I module 2 so we need to build the project with adf dependency libraries...

  Two copies of the way to build the project with trial and error in adf adf

  Timo

• Why I can't see 'Build' and 'Deploy' enabled for my projects?

  This happens if I use the "Simple SOAP App" model or do not use any model at all. My user ID is a user of developer and a Service Developer administrator. I am also unable to see the other models "No. Template" and "Simple SOAP App".

  There has been some periodic problems with commissioning. As of yesterday, it was working. You're still having problems and what is your domain name?

• The deployment of Data Mining Project

  Hello

  I am new to the DataMining. I have finished a tutorial on the right customers when they buy new offers or not a video tutorial but it is very similar to this

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/12C/R1/DM/ODM12c-PQ.html?CID=8307 & SSID = 122587621791540

  Prediction (classification). I understood it completely. After connecting the models of classification to view output or a table I want results. and I got the table named Prediction_view in my diagram

  I want to ask some questions.

  1. How can I register these predictions on visitors just be inserted?
  2. Whenever I need predictions, should I work on the project again and do view applied fees or a table?
  3. After deployment using (right click on the table or the data output view), I had all of the .sql files in my directory. Are only as files used for the fresh prediction algorithms?
  4. is it possible to refresh this view before making predictions?

  In fact, I have same scenario in my application. customer quote management and sales. After sending the quote of sale to the customer, I want to apply the weather customer Classification will respond to that quote or not?

  Thank you.

  Please see this white paper on the deployment of workflow using generated sql scripts

  http://www.Oracle.com/technetwork/database/options/advanced-analytics/odmrcodegenwhitepaper-2042206.PDF

  http://www.Oracle.com/technetwork/database/options/advanced-analytics/companion-2042207.zip

  I will use the workflow in the white paper for example to answer your questions.

  1. How can I apply these predictions on visitors just be inserted?

  In the workflow of demo, the INSUR_CUST_LTV_SAMPLE will APPLY node contains new data to be applied (Apply node) to the (node class Build) model for predictions.  In your case, you have a Data Source node that contains customer data has to be inserted.

  2. whenever I need predictions, should I work on the project again and do view applied fees or a table?

  In the workflow of demo, the node SCORED_CUSTOMERS captures the predictions.  Note that the node creates the output as a VIEW (SCORED_CUSTOMERS_V), this point of view always reflect predictions for new data.  There is no need to run any of these nodes again for new data, the SCORED_CUSTOMERS_V view always grabs the latest data based estimates.  Had created the output as a TABLE instead of that node, you must run the node to persist the new predictions.

  3. once deployment using (right click on the table or the data output view), I had all of the .sql files in my directory. Are only as files used for the fresh prediction algorithms?

  Please see the white paper for the use of script files.

  4. is it possible to refresh this view before making predictions?

  See above responses.

  Thank you

  Denny

• "Value is invalid or out of range" when you build the project in CVI 2009

  I converted a project to the wire of the CVI 9.0.1 to CVI 2009, and whenever I try to compile the distribution I get immediately the error message "Value is invalid or out of range" and stop the construction.  This error message is not too terribly useful to determine what the problem is, and I don't see anything obviously wrong with the signs of 'change the Installer '.  Any idea what's going on?  Thank you.

  Well, I'm a little confused by what I see. The newspaper confirms my suspicions earlier that one of the values of timer progress cached version is cause of an error. However, the values in the file "TriboScan OFFLINE.cds" you posted appear very well and do not cause an error when I copy in .cds another simple distribution (since I do not have the files to test your actual building distribution). Are you sure that you build the 'TriboScan OFFLINE.cds' distribution? In any case, I recommend a little offending the .cds hand editing. Save first (just in case), open it in a text editor and delete everything between and (that should be all down). This should solve your problem.

  Let me know what you find.

  A. Mert

  National Instruments

• Build the project fails on QNX momentics IDE

  Software: Native SDK 2.0 beta3 QNX momentics IDE

  Problem: after press build project, no file bar.

  Have tried these methods:
  a.Restart pc and playbook on failure
  b on blackberry desktop software fail
  invalid c.Check os version
  d.REINSTALL blackberry sdk native-beta3 fail

  Does anyone know how to solve the problem?

  Thank you for your attention.

  Generation of a project does not generate a BAR file.

  Launch (run or debug) an application generates a BAR file development mode.

  Export Release Build Wizard generates an output mode BAR file.

  HTH,

  Christian

• Impossible to build the project on a Linux (task CAP)

  Hello

  I want to run my script compilation (with tag Cap ant script) on a linux machine. I have included the file tools.jar - ant - bb in the classpath, but there are also the JDE installation directory.

  Help me please if someone knows how to solve this problem. I cannot use the machine windows for my building project, is it possible to copy JDE dir from windows machine to linux for running the script?

  Kind regards

  Pulkit

  Finally solved the problem...

  Cap running under linux is pretty easy. We need rapc.jar and net_rim_api.jar in the bin and lib folders respectively alongwith correct path for Java, ANT & WTK (FNIHB predetermination).

• Weird thing when I build the project

  Hey guys, I got straight... everthing well served, in the output, the first piece, the end, links.

  When I build my movie and open the ISO file of with a Blu - Ray player (so I'm not wasting a disc, and I check everything first) my main movie starts.

  There are no menus, no intro, no buttons, nothing. Just the full movie.

  Also, when I preview the project again, I see that everything is perfect. The first piece, transitions, the menu and the buttons.

  What this may be?

  The most likely problem is that the reading software does not play the bluray correctly. Which player do you use?

  Also use a BD - RE for testing.

• Automatically building scripted projects

  Hello

  I am a fairly new user to Robohelp 9.0.2. I am generation html from the related Word documents help. A number actually. I would like to somehow automate the build process, where I am writing a script to open a Robohelp project, updated to reflect the latest version on the server and generate the WebHelp output.

  I'm having a hard time finding ways to do it. Does anyone have recommendations, examples of scripts or suggestions of places to learn more about scripting in general?

  Thank you

  Steve

  Hello

  There is a sample script that does this for the FrameMaker files. You should be able to easily modify the script to make it work with Word. See the second to the last script on http://www.grainge.org/pages/authoring/scripts/scripts.htm.

  If you want more information about getting started with scripts, see http://www.adobe.com/devnet/robohelp/articles/robohelp-extendscript.html.

  Take a bow

  Willam

• Cannot build the project to burn. Error message

  Hi guys

  New to CS4. Used the first several years ago, went through to Final Cut Pro and just moved backe to Adobe CS4.

  The problem I have is that I did the project in again and all the links are fine, but when I click on the build, after 5 seconds of her building, I get the error message "the SOFTWARE INTERNAL ERROR:.\Vobulator\TitlePlanner\CVOBUPlanner.cpp,line 332.

  Does anyone know how to fix this?

  I appreciate any suggestions.

  If you search the forum by using the keyword "vobulator", you will get some

  ideas on how to solve this problem.  I hope that one of them will work for you.

  -Jeff

• FLEX Builder AS project issues

  Hello

  I've been using Flex Builder for my projects flash for a while now and I love it, but Flex Builder stops finally do his at some point in the project of error checking.  This happens for 90% of my projects, so I don't end up given the error, until Flash compiles the SWF file. Does anyone have an idea how to solve this, perhaps a file somewhere that I have to delete when this happens?

  Thanks for any help.

  Have you tried project > clean...?

• Flex Builder 2 - project CF problem

  Hi all
  
  I cannot create a project in Flex using ColdFusion Flash Remoting Service as server technology...
  
  I just installed both ColdFusion and Flex Builder...
  
  I create a new project from scratch and select the ColdFusion Flash Remoting Service as server technology. Then, I get the following error:
  "Invalid server root. The server root must contain a WEB-INF/flex folder.
  and can not continue... I have a wwwroot/WEB-INF structure with no flex record...
  
  any suggestions as to why? or what / where I have gone wrong?
  
  Kind regards
  Jon.
  
  

  Looks like you don't have the 7.0.2 update applied to ColdFusion. You can check this in your ColdFusion administrator under the "System information" link at the top. You want a version under "Server Details" that looks like 7,0,2...

  If you need to get the update, you can find it here