Deployment of the Collections

Similar Questions

• Unable to see the Collections in remote desktop Services in Server Manager

  It doesn't seem to be a category for Windows Server for some reason, so I apologize if this is in the wrong category:

  We recently had an administrator leave our of the it group, and he was the one who had set up our fund services / remote server.  Recently, we wanted to deploy another remote application and found that we were not able to see the "Collections" option in the server in remote desktop services manager.  The only option listed is "servers".  However to reactivate the account administrator and the server like him gave us all permissions to see the option of Collections and to deploy another remote application.

  My question would be, this is a policy of setting Group / somewhere that is limiting the other users of the full access to Office services in Server Manager remotely.  I looked everywhere on the server (and google) to see if I could find where this setting is vain.  Any suggestions/help would be greatly appreciated.

  Thank you!
  Heda

  Hello

  Server forums are in an another Microsoft Community to it.

  This community is mainly for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to export the collected addresses

  I carried on a new machine (win 7). I have properly exported and imported my address book that contains only 7 entries in my opinion.
  It is now only that I realize that Thunderbird uses the addresses of his "collected addresses" for a long time to suggest the person in the address bar, and that all of these hundreds of addresses are not registered in my address book.
  How can I get access to my (what must be hundreds of) "collected addresses" and get them on my new machine?

  Thank you

  Opens the address book, then select Tools-Export. Select the collected book to export.
  http://KB.mozillazine.org/Moving_address_books_between_profiles

• Suddenly, my Thunderbird does not list the collected addresses and don't 'Always allow remote content' addresses.

  (1) under address book, used for the book of MAC OS X, as well as the collected addresses and a third list, I can't remember.
  Now it lists only MAC OS address book.

  "(2) if I click on"Always allow remote content"it won't let me click on 'OK', I think that it says in the top left corner" adds: "but gives me an empty list.

  Thank you!

  If I'm more mac savy you we're in trouble. The last Mac I used has a black and white screen and used the floppy 3 1/2 "

  See Troubleshooting in the Thunderbird Help menu, and then click the display folder of your profile (Thunderbird knows where he is, even if I'm not) the History.mab file is your collected addresses.

• How to get the date of deployment for the RT code?

  I'm using LabVIEW 8.5 and MAX 4.4.1f0 and cFP-2110. I want back the date of the deployment. Is it possible to recover the date of deployment for the RT code?

  Thank you

  Martine

  Hi John,.

  You must be able to FTP into your PSC 2110 from a Windows Explorer window and check the date of 'Change' of the startup.rtexe/or-rt/startup folder.

  Aaron P

  National Instruments

  Technical sales engineer

  http://www.NI.com/support

• Not able to access the PV which are deployed in the RT using the EPICS IO Server

  Hi, we have NIPXIe 8133 and 1 windows vista (32-bit) PC and I installed LabVIEW 2012 (32 bit) and the required modules. I also have another PC (6.3 Santiago RHEL) based on RedHat Linux and all 3 PCs are connected to the same network. I want to develop an application in which I want to deploy some variables of process in RT and want to access this PVs in Red Hat Linux PC. In order to develop this application, I do RT as a server of EPICS and Red Hat Linux PC as a Client of EPICS. I have deployed some variables of process using Server EPICS in RT now I want to access the value of the PVs in Red hat Linux PC and in this EPIC PC base is already installed but I am not able access PVs that are deployed in RT if you please help me solve this problem. Best regards, Ishan

  I have not assigned by default in one of my system and bridge that was the only problem in my system. Once I have given Defaullt bridge in all systems, I can access all of the HP that are deployed in the RT other 2 machines connected in network.

• Win2012 Server. Y at - it a shortcut to reach the Collections to the remote desktop Services without going through the Server Manager

  Win2012 Server. Y at - it a shortcut to reach the Collections to the remote desktop Services without going through the Server Manager?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I change the color of the plots (lines, points) in the collection Scattergraph plot

  For example, I go through a foreach loop and draw two points. How to distinguish this set of plots of the yet to come? How can I change the style, color and have separate lines (instead of on the line connecting everything) for each of my plots? I don't know how to set everything up, but it still does what he wants to do. TIA.

  Hello

  The problem you see occurs because of the following lines of code:

  The _data and _data2 scatterPlot3 value

  _data = scatterPlot3

  _data2 = scatterPlot3

  When you do this, you define _data as _data2 to reference an object of the simple concession - scatterPlot3.  Yes, even if you have (from the code you have posted at least) three slots in your collection, they are all pointing to the same object of point cloud.  So when you change the color for one, it changes the color for them all.  However, I think that you have fallen on the right solution in your last sentence.  If you want to have multiple locations on your ScatterGraph, each with its own color and style, they should each be separate and unique plots in the collection plot of your ScatterGraph.  Based on the code you posted, you'll see this if you comment just the two lines shown above.

  Please let me know if something is still uncertain.

  NickB

  National Instruments

• Anyone has an idea how to manually remove items that do not appear in the Collection, but take place on the device. Specifically, an audio book downloaded via Overdrive?

  Anyone has an idea how to manually remove items that do not appear in the Collection, but take place on the device.  Specifically, an audio book downloaded via Overdrive?

  Hello
  
  1. what type of files are in the audio book? Could you provide me with the file extensions?
   
  If you delete the information or files audio books could not show some information. I wouldn't recommend allows you to delete the files. If you want to remove them, you can contact overdrive support.
  
  Hope this information helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I start the Director I get "the collection of files its not valid or its corrupted. A new empty collections file has been created ".

  I've been using Director windows 2.6 on my operating system from vista for several months.   I just did the upgrade to windows 7 and now I get this message.

  "The collection file is not valid or its corrupted." A new empty collections file has been created "."

  Then, it closes the program.

  I had to rename a file called FFDshow.ax to another program called Muvee AutoProducer 6.1 works but I do not see how would the file collections of this program.

  Help, please.

  Thank you...

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Try to install Windows 7 but the grip to install in the "collection of information".

  suspended in the "collection of information".

  Try to install Windows 7, suspended in the "collection of information".  Any suggestions?

  How long you wait to determine that she is hooked on collecting the information?

  You try to upgrade or clean installation?

  You disconnect all devices non-essential connected to the computer before attempting the installation?

  If you are upgrading from a previous version of Windows:

  1 disable any security software before attempting to upgrade
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:
  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

• "Authentication failed" when you try to deploy to the device app

  Out of the blue in the middle of the day yesterady, I can't deploy all the apps on my Z30.

  The message (tried both Momentics and command line deploy blackberry) simply says "failure of the authentication of the user.

  Note that this is different from the message that you get when you specify the wrong password, which is "error: failed authentication." There was 1 of 5 attempts", so I know my password is correct.

  I am capable of correctly SSH to the machine after using the blackberry connect command, but cannot download a token to debug or deploy applications.

  Who would do it.  You must complete this before configuring the device is fully functional by the USB bus.  Manually sys.firstlaunch resets this flag.

• BAR the deployment of the package in eclipse

  Since then, I've changed my signature key in eclipse, 'run as' reports an error:
  result::failure 881 the application author does not match the author token of debugging

  Yes, in the MANIFEST. MF file in the package BAR always has the bad (old) author. But in the bar - descriptor.xml is the author of (new) correct.

  When I run nativepackager-blackberry and blackberry - deploy on the console, then it works.

  How does "run as" build a BAR package in eclipse? And how can I solve this problem?

  In the native SDK BlackBerry go window-> Preferences-> BlackBerry-> signature and remove all debug them tokens created with your old keys.  The SDK seems here for this information when deploying to a device and will use the debugging first token it finds.  Looks like it's picking up a token of debugging of your previous code signing key set.

• Ripple error deployment to the simulator fails

  Hi, I'm taking my first steps in development of BB. My company asked me to do a BB - app with IBM work lamp. I installed the SDK Webworks, waving and a BB Simulator (model 9900). I also added the necessary environment variables on Windows 7. I did a hybrid application that contains the html, css and javascript. After the creation and deployment of the local console of the work light, I can open the app with ripple. After the start of the services, I can pack and start the work of packing App., but the deployment on the simulator fails. I get the following error:

  Spawning Simulator 9900 - 7.0.0.384...

  stderr: CreateProcessW: the system cannot find the specified file.

  Exit take flight for 9900 - 7.0.0.384

  I have seen this error on the forum, but others had when packing. I get it through to the Simulator. Can someone help me with this?

  I solved my problem by choosing another Simulator, 9860-model. Ripple now starts the Simulator, which is extremely slow. The hotswap function crashes immediately, but the Simulator works with my application. However I am concerned that blackberry development tools is so buggy. But as long as I don'tn use the simulator that's good enough.

• Flash Builder does not appear to be deployed to the Simulator:

  Hey guys!

  So here's the deal. I am running Win7 with the IDE Flash Builder Burrito. I followed the guide on the BB step by step to create my first Hello World project. When I try to debug, FB seems to show that it has installed the successful application on the Simulator, but still waiting to connect to the application until it finally expires with the message "the Flash BUilder debugger cannot connect to the running application".

  Host machine, I ping IP of the Simulator, and the mode of development.

  I inserted the target IP address in the Debug menu (it's 192.168.88.128) and the debug host is the IP address of the host too (10.0.3.136). I entered the correct device as password.

  Scratching my head here now, what Miss me?

  Alright! It is very very annoying. I discovered that I was in fact trying to deploy on the previous version of the Simulator... Sorry to lose all time on it. Consider this a rookie mistake