Deployment of the ISE (L

Similar Questions

• Deployment of the ISE

  Hi guys.

  Im trying to install two ise of cisco devices. Primary and Seconadary. All right. Import the cert self signed since the secodary in elementary school, and life is good.

  But... I though that if I do the secondary node PRIMARY only MONITORING it would be better for the cpu and all that. When I have it and go to the dashboard I get an error indicating that the secondary node unreliable cuz has a self signed CERT. It doesn't let me see the dashboard. Someone had this problem?

  I don't have a CA Cert maybe if I use certificates verisign or godaddy it would work. We have spare parts and they are cheap, and these certificates would be useful for guests not to see her continue even when things and so on

  Sent by Cisco Support technique iPhone App

  Hello

  No need to worry this is because reports that are displayed are from the node secondary so the browser rejects the content. As a newspaper of circumvention in the secondary node using the full domain name or CN for the name of cert and their trust self signed cert. Once you log in the primary, you will see the content that is displayed again.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• The ISE Cisco switch configuration

  Hi experts,

  I got the following network:

  Devices-> switch access-->--> access switch central office switch-> ISE Server

  All switches are capable IOS for the 802. 1 X and configurations of AAA for ISE to manage network devices. However, I read in the guide on the configuration of the switches in preparation for the deployment of the ISE of CIsco, but I wonder what should I configure switches for access and basic switches or only configure the switches for access to EHT?

  Thanks for your time to read!

  If all clients are non-DHCP clients, then no configuration is based or distribution at all.

  But you may need to search different options of profiling, if the customers are not active DHCP. Access switch supports the function of detection IOS? Would be very useful to have such a that it would send important profiling information at ISE. You may need to use the right options for ISE of profiling to determine the details of the endpoint.

  Concerning

  Vivek

• Check the ISE for the VPN Cisco posture

  Hello community,

  first of all thank you for taking the time to read my post. I have a deployment in which requires the characteristic posture of controls for machines of VPN Cisco ISE. I know that logically once a machine on the LAN, Cisco ISE can detect and apply controls posture on clients with the Anyconnect agent but what about VPN machines? The VPN will end via a VPN concentrator, which then connects to an ASA5555X that is deployed as an IPS only. Are there clues to this?

  Thank you!

  The Cisco ASA Version 9.2.1 supports the change in RADIUS authorization (CoA) (RFC 5176). This allows for the gesticulations of users against the ISE Cisco VPN without the need of an IPN. Once a VPN user connects, the ASA redirects web traffic to the LSE, where the user is configured with a Network Admission Control (NAC) or Web Agent. The agent performs specific controls on the user's computer to determine its conformity against one together configured posture rules, such as the rules of operating system (OS) patches, AntiVirus, registry, Application, or Service.

  The posture validation results are then sent to the ISE. If the machine is considered the complaint, then the ISE can send a RADIUS CoA to the ASA with the new set of authorization policies. After validation of the successful posture and CoA, the user is allowed to access internal resources.

  http://www.Cisco.com/c/en/us/support/docs/security/Adaptive-Security-Appliance-ASA-software/117693-configure-ASA-00.html

• Best practices for the restart of the nodes of the ISE?

  Hello community,

  I administer an ISE installation with two nodes (I'm not a specialist of the ISE, my job is simply to manage the user/mac-addresses... but now I have to move my ISE a VMWare Cluster nodes to another VMWare Cluster.

  (Both VMWare environments are connected to our network of the company, but are different environments. vMotion is not possible)

  I want to stop ISE02, move it to our new VMWare environment and start it again.

  That I could do this with our ISE01 node...

  Are there best practices to achieve this? (Stop request first, stopl replikation etc.) ?

  Can I really just reboot a node ISE - or I have consider something before I do this? After I did this?

  All tasks after reboot?

  Thanks for any answer!

  ISE01
  Administration, monitoring, Service policy
  PRI (A), DRY (M)

  ISE02
  Administration, monitoring, Service policy
  SEC (A), PRI (M)

  There is a lot to consider here.  If changing environments involves a change of IP address and IP extended, then your policies, profiles and DACL would also change among other things.  If this is the case, create a new VM ISE in the new environment in evaluation license using the and recreate the old environment deployment by using the address of the new environment scheme.  Then a new secondary node set rotation and enter it on the primary.  Once this is done, you can re - host license from your old environment on your new environment.  You can use this tool to re - host:

  https://Tools.Cisco.com/swift/LicensingUI/loadDemoLicensee?formid=3999

  If IP addressing is to stay the same, it becomes simpler.

  First and always, perform an operational backup and configuration.

  If the downtime is not a problem, or if you have a window of maintenance of an hour or so: just to close the two nodes.  Transfer to the new environment and light them, head node first, of course.

  If the downtime is a problem, stop the secondary node and transfer it to the new environment.  Start the secondary node and when he comes back, stop the main node.  Once that stopped services on the head node, promote the secondary node to the primary node.

  Transfer of the FORMER primary node to the new environment and turn it on.  She should play the role of secondary node.  If it is not the case, assign this role through the GUI.

  Remember, the proper way to shut down a node of ISE is:

  request stop ise

  Halt

  By using these commands, the risk of database corruption decreases by 90% (remember to always backup).

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• How to get the date of deployment for the RT code?

  I'm using LabVIEW 8.5 and MAX 4.4.1f0 and cFP-2110. I want back the date of the deployment. Is it possible to recover the date of deployment for the RT code?

  Thank you

  Martine

  Hi John,.

  You must be able to FTP into your PSC 2110 from a Windows Explorer window and check the date of 'Change' of the startup.rtexe/or-rt/startup folder.

  Aaron P

  National Instruments

  Technical sales engineer

  http://www.NI.com/support

• Not able to access the PV which are deployed in the RT using the EPICS IO Server

  Hi, we have NIPXIe 8133 and 1 windows vista (32-bit) PC and I installed LabVIEW 2012 (32 bit) and the required modules. I also have another PC (6.3 Santiago RHEL) based on RedHat Linux and all 3 PCs are connected to the same network. I want to develop an application in which I want to deploy some variables of process in RT and want to access this PVs in Red Hat Linux PC. In order to develop this application, I do RT as a server of EPICS and Red Hat Linux PC as a Client of EPICS. I have deployed some variables of process using Server EPICS in RT now I want to access the value of the PVs in Red hat Linux PC and in this EPIC PC base is already installed but I am not able access PVs that are deployed in RT if you please help me solve this problem. Best regards, Ishan

  I have not assigned by default in one of my system and bridge that was the only problem in my system. Once I have given Defaullt bridge in all systems, I can access all of the HP that are deployed in the RT other 2 machines connected in network.

• "Authentication failed" when you try to deploy to the device app

  Out of the blue in the middle of the day yesterady, I can't deploy all the apps on my Z30.

  The message (tried both Momentics and command line deploy blackberry) simply says "failure of the authentication of the user.

  Note that this is different from the message that you get when you specify the wrong password, which is "error: failed authentication." There was 1 of 5 attempts", so I know my password is correct.

  I am capable of correctly SSH to the machine after using the blackberry connect command, but cannot download a token to debug or deploy applications.

  Who would do it.  You must complete this before configuring the device is fully functional by the USB bus.  Manually sys.firstlaunch resets this flag.

• BAR the deployment of the package in eclipse

  Since then, I've changed my signature key in eclipse, 'run as' reports an error:
  result::failure 881 the application author does not match the author token of debugging

  Yes, in the MANIFEST. MF file in the package BAR always has the bad (old) author. But in the bar - descriptor.xml is the author of (new) correct.

  When I run nativepackager-blackberry and blackberry - deploy on the console, then it works.

  How does "run as" build a BAR package in eclipse? And how can I solve this problem?

  In the native SDK BlackBerry go window-> Preferences-> BlackBerry-> signature and remove all debug them tokens created with your old keys.  The SDK seems here for this information when deploying to a device and will use the debugging first token it finds.  Looks like it's picking up a token of debugging of your previous code signing key set.

• Problem of Communication of the ISE - AD

  Dear Experts,

  I get the error in ISE while I'm trying to authenticate below.

  "ISE has the problem of communication with active directory with its machine authentication." In the identity of external Sources, the ISE is connected to the group. What to do... ?

  And also please tell me between ISE and AD, using what port number or protocol that he communicates... ?

  Thanks in advance...

  KVS

  Hi Ludovic,.

  That is right. It only supports LDAP on port 389 (clear text), this feature is expected to be supported, but no work has yet been done. This is an improvement for your reference request:

  CSCsx72116 : WLC: Add support for LDAP secure

  Symptom:

  WLC does not support the Protocol LDAPS (secure LDAP).

  Conditions:

  Usually connect to a LDAP secure port 636.

  Workaround solution:

  Plain of using LDAP.

  From now on, either you can continue to use plain LDAP (389) or put the ACS/ISE between to secure communications between them.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Ripple error deployment to the simulator fails

  Hi, I'm taking my first steps in development of BB. My company asked me to do a BB - app with IBM work lamp. I installed the SDK Webworks, waving and a BB Simulator (model 9900). I also added the necessary environment variables on Windows 7. I did a hybrid application that contains the html, css and javascript. After the creation and deployment of the local console of the work light, I can open the app with ripple. After the start of the services, I can pack and start the work of packing App., but the deployment on the simulator fails. I get the following error:

  Spawning Simulator 9900 - 7.0.0.384...

  stderr: CreateProcessW: the system cannot find the specified file.

  Exit take flight for 9900 - 7.0.0.384

  I have seen this error on the forum, but others had when packing. I get it through to the Simulator. Can someone help me with this?

  I solved my problem by choosing another Simulator, 9860-model. Ripple now starts the Simulator, which is extremely slow. The hotswap function crashes immediately, but the Simulator works with my application. However I am concerned that blackberry development tools is so buggy. But as long as I don'tn use the simulator that's good enough.

• Cannot access the ISE-3395-K9 CISCO Web GUI

  Hello

  I can't access the ISE-3395-K9 web gui interface concert 0 with ip address is 192.168.1.10.  I put the ip address of my labtop to 192.168.1.20 and could ping back but am still not able to access them through a direct connection between my labtop to concert interface 0 using one of the supported web browsers.  Any help would be greatly appreciated.

  It is possible that the GUI was configured to restrict access to only certain IPs / subnets. If 192.168.1.x isn't one of them, then you will have access.

  Are you able to connect to the shell via SSH? If so, you should check and confirm that all associated ISE services run by running the following command:

  show the application status ise

  Thank you for evaluating useful messages!

• How can I activate the "Host key" for my sftp to the ISE Server?

  Hello

  I can't copy my files to upgrade 1.2 ISE to my repositories the.

  Here is a cut and paste of my CLI on one of my knots ISE after attemtping to copy from my workstation (running a SFTP server) to one of my nodes of ISE.

  XXX-ise-01 / admin # s copyftp: / //ise-upgradebundle-1.1.x-a-disque 1.2.0.899.i386.tar.gz.:.

  User name: Admin

  Password:

  % ERROR: backup failed due to one of the following reasons

  1 host option key is not configured

  2. the host key is removed due to the new image

  3 host key is removed from any other depositary having same ip/hostname

  % Please reconfigure the host key option

  % Error: transfer not possible

  I don't have whatever it is configured with the option "host key.

  I googled and searched, but cannot find references limited to the "Host key" command within Cisco. I tried various forms of it on the ISE node with no luck.

  I tried an FTP transfer, but it does not work.

  Any ideas?

  You can try to add a repository to your local configuration as an sftp server that should start the process host key.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• The ISE 1.3 SMS configuration

  When I try to set up an SMS to EHT gateway configuration, I received this message when I set up Data (coded Url portion):

  An exception occurred when creating a profile of sms. Request not processed - Possible XSS entry

  Please advise

  Hi Mohamed,

  Part of the coded URL does not support UTF-8 or UTF-64 coding patterns. I only take plain text. An enhancement request for the care of the encoding formats dropped on version 1.3 of the ISE.

  Thank you

  NGO

• Flash Builder does not appear to be deployed to the Simulator:

  Hey guys!

  So here's the deal. I am running Win7 with the IDE Flash Builder Burrito. I followed the guide on the BB step by step to create my first Hello World project. When I try to debug, FB seems to show that it has installed the successful application on the Simulator, but still waiting to connect to the application until it finally expires with the message "the Flash BUilder debugger cannot connect to the running application".

  Host machine, I ping IP of the Simulator, and the mode of development.

  I inserted the target IP address in the Debug menu (it's 192.168.88.128) and the debug host is the IP address of the host too (10.0.3.136). I entered the correct device as password.

  Scratching my head here now, what Miss me?

  Alright! It is very very annoying. I discovered that I was in fact trying to deploy on the previous version of the Simulator... Sorry to lose all time on it. Consider this a rookie mistake