Windows could not search for new updates. Code 80070424 Windows update encountered an unknown error.

Similar Questions

• Windows Vista could not search for new updates (error code 1 800700)

  original title: Windows Vista could not search for new updates

  Windows Vista could not search for new updates.
  800700 1 error code.
  My Antivirus software is Bitdefender.
  What should I do?

  How long it has been since the system enabled to update?

  Which version of Windows Vista (32-bit or 64-bit) and service pack (1 or 2) level.

  When the system has been changed swept with the suite of security/antivirus installed, no matter what has been detected? If so, what, please?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• Windows could not search for new updates (error code 80004002)

  Windows could not search for new updates and gives the error code "80004002" I tried to reinstall UpdateAgent (fatal error encountered) and I tried the MSFixIt and the automatic troubleshooter. Also tried everything to this forum and nothing helps: http://www.bleepingcomputer.com/forums/t/460975/windows-update-code-80004002/

  When I try the "sfc/scannow" it gives me that he can't sweep.

  I have looked everywhere and tried everything. Help me the microsoft community, you're my only hope.

  Hello

  Thank you for your update on the issue.

  Since you have already done SFC scan, I suggest you perform a repair installation (upgrade Inplace). There seems to be some corruption of system files and the repair facility should be able to fix them.

  Note: before proceeding with the installation of repair, I suggest you make a backup of all your data.

  Backup your files: http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  To perform a repair installation, follow the steps in the following article:

  How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2255099

  I hope this helps. Please post back your results for assistance.

• Windows could not search for new updates-error code 80070422

  Windows could not search for new updates

  Error: code 80070422

  [Moved from the community centre of Participation]

  Hello

  Which Windows operating system work?

  Please refer to:

  http://Windows.Microsoft.com/en-in/Windows7/Windows-Update-error-80070422

• Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code

  Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 could not search for new updates code error C80003FA

  I just activated Windows 7. When I tried to update, I have "Windows 7 could not search for new updates C80003FA error code".

  Tried three times with the same result. Could someone, please?

  C80003FA ReadVerifyFailure - a read verification error occurred.

  1. What is the suite of security/antivirus installed?
  2 is a 3rd party firewall installed?
  3 - is an upgrade to another edition of Windows?

  Please click on the round of departure. In the search field type programs and files in wups2.dll

  Under programs right click wups2.dll and choose Properties, when the Properties window opens, click the Details tab.
  Version of the file and the product should be showing 7.4.7600.226
  Now do the same for c:\windows\system32\wuaueng.dll
  He, too, should show file version and product like 7.4.7600.226
   
  If the version is earlier than that, you will need to install the more recent Version of the Windows Update Agent.
  The easiest way to do this is therefore download and Save the Fixit found here - How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Run MicrosoftFixit50202.msi and choose its default mode.

  BUT, if the installed firewall antivirus/security suite or a 3rd party is causing the "reading check error" then the Fixit may/does not work.
  If this is the case, then Configure the system to boot after download and Save the Fixit.
  Then, run the Fixit after the reboot to clean boot state.
  Restart and Cancel the clean boot steps, restart again to normal Windows mode.
  
  NOTE: in the boot minimum state all the 3rd party firewalls will be disabled. When you run the Fixit either unplug the system from it is the network connection or make sure the native firewall of Windows 7 is now on by opening the control panel > Windows Firewall.

  Expert MowGreen Windows IT Pro - consumer safety

• Vista - Error Code: 80070426 (Windows could not search for new updates)

  I have Windows Vista Home Premium Service Pack 2 on HP Pavilion dv6700 Notebook PC 64 - bit operating system. For about a month, it stopped updating. Whenever I want to update it gives me the same message "Windows could not search for new updates. Error encountered, Code 80070426 ".

  After the possible solutions for others, which posted a similar problem, I typed "service" on start search and on the side slsvc, it gives a description. When I click Start the service, it gives me the message "error 2: the system cannot find the file specified."

  I appreciate any back feeding to help me solve the problem.

  Thank you

  Mikielle

  mikielle,

  0x80070426 - ERROR_SERVICE_NOT_ACTIVE the service has not been started

  Make sure that the automatic update services has been started.  Make sure that BITS is started.

  1. click on start and run, type services.msc, and then click ok.

  2. in the list of services, click on automatic updates, and then click Properties.

  3. in the startup type list, click Automatic, and then click on apply.

  4. If the service status is stopped, click Start, and then click ok.

  5. right click on background intelligent transfer service, and then click Properties.

  6. in the startup type list, click Manual, and then click on apply.

  or

  1 ddwnload and install the wga http://go.microsoft.com/fwlink/?linkid=56062 diagnostic tool

  2. after running the wga diagnostic tool, click the "windows" tab and then click on 'copy to clipboard '.

  3. then, visit the following Web site and create a post in the forum "problems of wga validation" and paste the results of the diagnostic data in a detailed post wga:

  http://forums.Microsoft.com/genuine/default.aspx?siteid=25

  4. a wga troubleshooting specialist will analyze the data and recommend an appropriate solution.

• error code 80080005 'Windows could not search for new updates"

  error code 80080005 'Windows could not search for new updates"

  What operating system?

  http://support.Microsoft.com/kb/910337
  This error message is similar to the error message "error 5: access is denied." To resolve this problem, follow the steps described in the section "error 5: access is denied."

  This error indicates that access for FOREST permissions have been modified. To repair these access permissions, use one of the following methods, depending on the operating system.

  Windows XP

  1. Click Start, click run, type cmd, and then click OK.
  2. Type the following command and press ENTER:
     SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  3. Click Start, click run, type services.msc and click OK.
  4. Double-click on Background Intelligent Transfer Service.
  5. On the general tab, click Start.

  TaurArian [MVP] 2005-2010 - Update Services

• Error code 80072EE2: Windows could not search for new updates.

  I am unable to get the Windows updates.  I repeatedly receive 80072EE2 error code: Windows could not search for new updates.  The help of instructions indicate I would add three updated addresses my firewall.  I am running McAfee Total Protection with a firewall, but I don't see an option to add addresses.  Do you have suggestions about this problem?

  Hello

  Did you face this problem after installation of McAfee?

  Follow these steps:

  Method 1: There is no option to add the URL of Web site in McAfee firewall.  However, you can add the URL in the filtered McAfee Web site. Click Parental control, clicking n config on the right panel, by clicking the forward button, and then click filtered Web sites on the left had Panel Add URL.

  Windows Update error 80072ee2
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

  Method 2: Run the Fixit and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

   

  Method 3: If this does not help, you can temporarily disable the antivirus and check if that helps.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• Windows could not search for new updates. Error 8024402f code. Fix available?

  Windows could not search for new updates. Found error 8024402f code. I tried everything, but the problem has not been resolved.  Vista service pack 2 build 6002. is any kind of fix available? I tried the fixit. It shows the Update component must be repaired and there is no problem, but in fact it is not the problem. Updates have been arrested?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  These errors can occur caused by one of the following problems:

  • Applications or processes that interfere with Internet communications
  • Problems on your computer
  • Strong Internet activity
  • Recoverable database errors

  If the fixit doesn't do the trick, you will need to manually go through the troubleshooting utility.

• Windows Update will not install - Windows could not search for new updates to Code 8007051 A

  original title: impossible to install iTunes error HRESULT:0x8007051A and Windows Update doesn't work Windows could not search for new updates to Code 8007051 A

  Am running Vista 32 bit OS and trying to install iTunes but still get the following error;

  ' Microsoft.VC80.CRT.version = "8.0.50727.4053".Guy = "win32".publicKeyToken

  "="1fc8b3b9a1e18e3b".processorArchitecture ="x 86" also HRESULT:0x8007051A

  Some research has indicated that it was due to a problem of update?

  Then tried checking updates (Windows update), who does not ("" Windows could not search for new updates - errors found Code 8007051 A ' ")

  The "get help" link was as useless as an ashtray on a motorbike.

  Any help would be greatly appreciated

  Hi Discopossum,

   

  How long have you encountered this problem?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

  Method 3:  Clean boot the computer and then try to install ITunes

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  Method 4:  Run the fixit available in the article below to reset the Windows Update components

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If problems with iTunes didn't exist yet, contact the Apple Support
  http://www.Apple.com/support/iTunes/

• Windows (Vista) could not search for new updates C800044E error code

  When I try to update windows Vista Home Premium I get: Windows could not search for new updates, error C800044E code.  I need help.  Herm

  Hello
   
  You can use the following methods that can help you solve your problem:
   
  Method 1: Try reseting component of Windows Update and verify that the problem, to do follow below the link which can help you to solve your problem:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058/en-us
   
  Method 2:
  Step 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.

   

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

   

  Step 2:

  I suggest that you put your computer in a clean boot, try to install the updates and check.

  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• I'm doing a windows update and I get Windows could not search for new updates... errors found... Code 80244019

  I'm doing a windows update and I get Windows could not search for new updates... errors found... Code 80244019... Can someone help me please

  How to troubleshoot problems connecting to Windows Update or Microsoft Update https://support.microsoft.com/en-us/kb/818018

• Windows Update could not search for new updates

  Update of Windows gives an error, Windows could not search for new updates
  Error (s) found:
  Code D 8007370 Windows Update encounter an unknown error. There is no articles about this error code, and the last windows update has been installed on 2 May.  Fixes for this problem?

  Hi Rob_in_COS,

  Thank you for using answers Forum.

  I found this article which deals with your question:

  System Update Readiness Tool what Windows Update installation errors can possibly answer?

  The following table lists the error messages that you may receive when you try to install a software update. These errors may be caused by a deficiency of the system the system update readiness tool may be able to resolve. However, the tool may be unable to fix all instances in which these errors occur.

  0x8007370D

  ERROR_SXS_IDENTITY_PARSE_ERROR-

  An identity string is malformed.

  Microsoft Download Center

  You can download manually rates system update readiness tool from Microsoft Download Center. The current version of these tools are released in April 2009. The following files are available for download from the Microsoft Download Center:

  For all supported versions based on the x 86 Windows Server 2008 and Windows Vista

  Download Windows Vista and Windows Server 2008 for 32-bit systems package.

  (http://www.microsoft.com/downloads/details.aspx?FamilyID=0435684b-8d12-4028-9cb0-b2903257f1fd)

  For all supported versions based on the x 64 of Windows Server 2008 and Windows Vista

  Download Windows Vista and Windows Server 2008 for x 64-based systems package.

  (http://www.microsoft.com/downloads/details.aspx?FamilyID=b950e3b1-3267-41c2-8f10-1fe9a4bfa44d)

  More information is available here:
  http://support.Microsoft.com/kb/947821

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows could not search for new updates, error: 80070005, 80072F8F

  An erroe message appears when you try to download windows updates. I tried to use Microsoft difficulty It Center and it is said that repairs need to be made, it has been fixed, but the problem won't go away. Trying to submitt a request for assistance to Microsoft, but it is not available (?).  I was not able to download the updates of windows since 08/03/2012

  80072F8F

  Make sure that the date and including Internet Zone are correct on your computer.
  You may need to restart after the synchronization of time of your computer, etc..

  Windows Update error 80072f8f
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072F8F

  Error message when you search for updates in Windows Vista: "Windows could not search for new updates (Code 80072F8F)".
  http://support.Microsoft.com/kb/929458

  Error 80070005

  http://support.Microsoft.com/kb/968003/
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates). The other alternative is virus/malware.

• Windows could not search for new updates (error 800F080D)

  original title: Windows could not search for new updates

  Errors found: Code 800F080D.  Could be anti-virus software related as it seemed to stop working when I performed an anti-virus scan.

  HI gdm21,

  Since you have questions, even the installation of system update readiness tool. There may be a corruption of the system which causes this error and updates to fail.

  Just ensure that you have run through this repair tool: http://support.microsoft.com/kb/929833

  Do you get errors when you run this?