The ISE 1.3 SMS configuration

Similar Questions

• The ISE Cisco switch configuration

  Hi experts,

  I got the following network:

  Devices-> switch access-->--> access switch central office switch-> ISE Server

  All switches are capable IOS for the 802. 1 X and configurations of AAA for ISE to manage network devices. However, I read in the guide on the configuration of the switches in preparation for the deployment of the ISE of CIsco, but I wonder what should I configure switches for access and basic switches or only configure the switches for access to EHT?

  Thanks for your time to read!

  If all clients are non-DHCP clients, then no configuration is based or distribution at all.

  But you may need to search different options of profiling, if the customers are not active DHCP. Access switch supports the function of detection IOS? Would be very useful to have such a that it would send important profiling information at ISE. You may need to use the right options for ISE of profiling to determine the details of the endpoint.

  Concerning

  Vivek

• Check the ISE for the VPN Cisco posture

  Hello community,

  first of all thank you for taking the time to read my post. I have a deployment in which requires the characteristic posture of controls for machines of VPN Cisco ISE. I know that logically once a machine on the LAN, Cisco ISE can detect and apply controls posture on clients with the Anyconnect agent but what about VPN machines? The VPN will end via a VPN concentrator, which then connects to an ASA5555X that is deployed as an IPS only. Are there clues to this?

  Thank you!

  The Cisco ASA Version 9.2.1 supports the change in RADIUS authorization (CoA) (RFC 5176). This allows for the gesticulations of users against the ISE Cisco VPN without the need of an IPN. Once a VPN user connects, the ASA redirects web traffic to the LSE, where the user is configured with a Network Admission Control (NAC) or Web Agent. The agent performs specific controls on the user's computer to determine its conformity against one together configured posture rules, such as the rules of operating system (OS) patches, AntiVirus, registry, Application, or Service.

  The posture validation results are then sent to the ISE. If the machine is considered the complaint, then the ISE can send a RADIUS CoA to the ASA with the new set of authorization policies. After validation of the successful posture and CoA, the user is allowed to access internal resources.

  http://www.Cisco.com/c/en/us/support/docs/security/Adaptive-Security-Appliance-ASA-software/117693-configure-ASA-00.html

• Cannot access the ISE-3395-K9 CISCO Web GUI

  Hello

  I can't access the ISE-3395-K9 web gui interface concert 0 with ip address is 192.168.1.10.  I put the ip address of my labtop to 192.168.1.20 and could ping back but am still not able to access them through a direct connection between my labtop to concert interface 0 using one of the supported web browsers.  Any help would be greatly appreciated.

  It is possible that the GUI was configured to restrict access to only certain IPs / subnets. If 192.168.1.x isn't one of them, then you will have access.

  Are you able to connect to the shell via SSH? If so, you should check and confirm that all associated ISE services run by running the following command:

  show the application status ise

  Thank you for evaluating useful messages!

• How can I activate the "Host key" for my sftp to the ISE Server?

  Hello

  I can't copy my files to upgrade 1.2 ISE to my repositories the.

  Here is a cut and paste of my CLI on one of my knots ISE after attemtping to copy from my workstation (running a SFTP server) to one of my nodes of ISE.

  XXX-ise-01 / admin # s copyftp: / //ise-upgradebundle-1.1.x-a-disque 1.2.0.899.i386.tar.gz.:.

  User name: Admin

  Password:

  % ERROR: backup failed due to one of the following reasons

  1 host option key is not configured

  2. the host key is removed due to the new image

  3 host key is removed from any other depositary having same ip/hostname

  % Please reconfigure the host key option

  % Error: transfer not possible

  I don't have whatever it is configured with the option "host key.

  I googled and searched, but cannot find references limited to the "Host key" command within Cisco. I tried various forms of it on the ISE node with no luck.

  I tried an FTP transfer, but it does not work.

  Any ideas?

  You can try to add a repository to your local configuration as an sftp server that should start the process host key.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• 1.3 the ISE and multiple licensing requirements

  I am building a box of ISE 1.3 and I want to know if the following is feasible

  I have an AD forrest who has several groups of configured users

  1. Corporate
  2. BYOD
  3. demo

  What I want to do, use these groups to assign users wireless to the VLAN correct based on the membership of these groups AND the type of device they are connecting from.

  for example User1 connects to the network wireless from a Mac.  And they belong to the Group of corporate users.  I would like to be put on the vlan corporate.

  However, are they connect from their IPhone device and also belong to the Group BYOD, they get put on VLAN BYOD which has restricted access.

  I guess I should add User1 to the company and the BYOD AD groups, then the terms of use to determine what type of device they use and then create a profile for authorization to manage this VLAN they deleted in.  Then use airespace acl to determine what resources, they have access to.

  Unfortunately, the interface has changed a bit from 1.2 to 1.3, and I don't know if this is feasible.

  I advise to use the BYOD within the ISE feature that uses the device registration. All devices are on (default) RegisteredDevices group identity within the ISE, so that your authorization policy can look if EndPointIdentityGroup = ADGroup RegisteredDevices AND = BYOD then = BYOD VLAN + ACL.

  Put your saved rule BYOD above all others in the list for your rule of Group of companies don't replace the BYOD.

• Best practices for the restart of the nodes of the ISE?

  Hello community,

  I administer an ISE installation with two nodes (I'm not a specialist of the ISE, my job is simply to manage the user/mac-addresses... but now I have to move my ISE a VMWare Cluster nodes to another VMWare Cluster.

  (Both VMWare environments are connected to our network of the company, but are different environments. vMotion is not possible)

  I want to stop ISE02, move it to our new VMWare environment and start it again.

  That I could do this with our ISE01 node...

  Are there best practices to achieve this? (Stop request first, stopl replikation etc.) ?

  Can I really just reboot a node ISE - or I have consider something before I do this? After I did this?

  All tasks after reboot?

  Thanks for any answer!

  ISE01
  Administration, monitoring, Service policy
  PRI (A), DRY (M)

  ISE02
  Administration, monitoring, Service policy
  SEC (A), PRI (M)

  There is a lot to consider here.  If changing environments involves a change of IP address and IP extended, then your policies, profiles and DACL would also change among other things.  If this is the case, create a new VM ISE in the new environment in evaluation license using the and recreate the old environment deployment by using the address of the new environment scheme.  Then a new secondary node set rotation and enter it on the primary.  Once this is done, you can re - host license from your old environment on your new environment.  You can use this tool to re - host:

  https://Tools.Cisco.com/swift/LicensingUI/loadDemoLicensee?formid=3999

  If IP addressing is to stay the same, it becomes simpler.

  First and always, perform an operational backup and configuration.

  If the downtime is not a problem, or if you have a window of maintenance of an hour or so: just to close the two nodes.  Transfer to the new environment and light them, head node first, of course.

  If the downtime is a problem, stop the secondary node and transfer it to the new environment.  Start the secondary node and when he comes back, stop the main node.  Once that stopped services on the head node, promote the secondary node to the primary node.

  Transfer of the FORMER primary node to the new environment and turn it on.  She should play the role of secondary node.  If it is not the case, assign this role through the GUI.

  Remember, the proper way to shut down a node of ISE is:

  request stop ise

  Halt

  By using these commands, the risk of database corruption decreases by 90% (remember to always backup).

  Please rate useful messages and mark this question as answered if, in fact, does that answer your question.  Otherwise, feel free to post additional questions.

  Charles Moreton

• 1.2 of the ISE and iPEP required certificates

  Hello

  For version 1.1.x of ISE, there are a few constraints on the certificates used for iPEP and Admin:

  Both EKU attributes must be disabled, if the two attributes, EKU are disabled in the certificate of Inline Posture, or the two attributes, EKU must be activated, if the server attribute is enabled in the certificate Postur Inline.

  • [http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bea904.shtml]
  • The same applies for iPEP ISE 1.2? For ISE 1.2 User Guide and Setup Guide material does not mention anything about EKU and the attributes of specific certificate...
  • Any thoughts?
  • Thank you
  • Octavian

  Validation of EKU has been removed in version 1.2

  "If you configure ISE for services like Inline Policy Enforcement Point (iPEP), the model used to generate the ISE server identity certificate must contain attributes to authenticate client and server if you use ISE Version 1.1.x or earlier." This allows the admin and inline nodes to mutually authenticate each other. The validation of the EKU for iPEP was removed in ISE Version 1.2, which makes this less relevant requirement. »

  Source:

  http://www.Cisco.com/en/us/products/ps11640/products_tech_note09186a0080bff108.shtml

• Posture of the ISE - check a specific MS KB

  Hello

  I ISE 1.2.1 works well with configured posture and now I´d like to check if a particular KB Microsoft is installed.

  How can I do this with the Posture of the ISE? Someone did he do already have?

  Kind regards.

  The Ko probably creates a specific registry key or add some file, you can check that. Most of the construction in Cisco KB checks, use the registry key to see if Ko is installed.

  Ex. KB2758694

  SOFTWARE\Microsoft\Updates\MSXML4SP3\Q2758694\

• Upgrade of the ISE

  Greetings. I'm doing an eval with the demo version of the ISE. Demo image is 1.0 and I'm trying to upgrade to 1.1.  I have the file appbundle on the box but I can't find this "repository" I should make reference to perform the upgrade.  It is not directly referenced in any of the documents that I have watched.

  application upgrading ise-appbundle - 1.1.1.268.i386.tar.gz?

  Thank you.

  If you put on localdisk on the box you can then create a repository on the CLI as follows:

  host / admin # conf t
  Enter configuration commands, one per line.  End with CNTL/Z.
  Host/admin (config) # local repository
  Host/admin(config-Repository) # disc url:
  output Host/admin(config-Repository) #.
  output Host/admin (config) #.

  can then make

  show the local repository

  or see the file

  then

  upgrading local ise-appbundle - 1.1.1.268.i386.tar.gz application

• CLI admin for nodes of the ise

  How CLI admins can be created for node ISE cisco?

  Is not documented, but do not see there is a limit. However you can point the admin access to AD now in the latest version of the ise. You can map ad groups to a specific role within the configuration preset of the ISE.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• COA and Clarification of the ISE

  Can someone clarify exactly what COA (change permission) is?

  From my understanding, ISE can make an initial authentication and using the configured authorization policy but it is not considered COSTS.

  If subsequently a posture or profiling check is performed for this authenticated, authorized session and a new policy applies to this existing session then this would be considered in COST.

  This is why COA is feasible with advanced license because of the posture and profiling.

  Thank you very much.

  Graham

  Hello

  CoA is a feature that allows two-way communication in the radius Protocol. Before the scenario you had when the clients connect to the network, the n intiates a radius authentication session, and then you have received either an accept or reject.

  With this agreement, after you receive reject it or accept. You can now put an end to an existing session, authenticate a user if their session information change and correspond to a different access policy (must as in the example if a customer makes inconsistent to consistent).

  CoA, which is not entirely used for the advanced features of license. There are a few scenarios where cost can be committed, for example, if an administrator removes any end point of the database of the ISE. ISE will then interview the internal session cache to see if there is an active session and then will issue a certificate of authenticity.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Question commissioning of the ISE NAC agent

  I downloaded the NAC agents and modules of conformity to the ISE and configured the client provisioning rules. The user guide is not really explain very good next steps.

  I guess because the identity of the user groups are used in politics, commissioning is used with webauth, is that correct?

  Jeppe,

  The commissioning customer is done with any authentication method. Whether via dot1x or webauth, it is the authorization policy that starts this process. You redirect your customers customer provisioning portal using the authorization policy. Then, you determine which agent (web agent, agent nac or no agent) through the client provisioning policy.

  Hope that helps,

  Tarik Admani
  * Please note the useful messages *.

• Update Windows 7 updated the guard and does not configure updates

  Original title: 2 Windows updates daily for the last 10 days

  I get 2 updates every time that I stopped for the night. The updates take anything between 3 and 5 minutes to install and the pc is turned off automatically. When I restart the pc it starts immediately configure updates and it can take anything up to ten minutes. I don't know how to access the updates of teas to see if they are fresh updates or if they the same two updates recurring constantly! This 'problem' started ten days ago.

  Click Start, type: Windows Update

  Press enter on your keyboard

  Click on the link to check updates

  A list of all the updates is downloaded

  You will be able to view the updates that must be installed, along with a description and the number of KB.

  You can then choose to go to http://www.microsoft.com/downloads and download these updates manually and install them.

  You can also click on change settings in Windows Update and click the option to download updates, but choose when to install them.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• When the computer starts, it reads configuration updates 1 3-0%; not updated since 12.8.09, showing 8070002 error

  When the computer starts, it reads configuration updates 1 3-0%, but it continues
  Latest Windows Update 12.8.09; do not update since 12.8.09
  Display of error code 8070002.
  Mechanic charged and removed the registry and advanced system care3

  Hello

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  ------------------------------------------------

  Check the above and you may need to use these methods to interrupt the cycle.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.