Derive COA key used in VMware

Similar Questions

• COA Key does not.

  I have a laptop that I just have to re - install windows on without the original CD as it is second hand. I installed using a SP3 CD and the key on the bottom of the laptop, on the certificate of authenticity does not work when you try to activate. Any ideas?

  "PhobiaB13" wrote in message News: 401cab47-52fa-49 c 8-b632-973bb2db3cae...

  I have a laptop that I just have to re - install windows on without the original CD as it is second hand. I installed using a SP3 CD and the key on the bottom of the laptop, on the certificate of authenticity does not work when you try to activate. Any ideas?

  Try to use the tool to update product key for re - enter your COA key
   
  http://www.Microsoft.com/genuine/selfhelp/xppkuinst.aspx
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Copy (cloning) a key USB of VMware ESXi

  Hi all

  I have a question about the copy of a key USB VMware (a USBkey VMware is an IBM option (in fact, any major brand for that matter) supported). Lack of VMware ESXi 5 from a USB key using the UEFI. Recently the USB has renounced us, so we reinstalled VMware ESXi5, installed updates and set up the latter again and everything works again fine, but to save time to stop in the future we would like to keep a copy of the USB on the tablet. Is there an easy way to easily copy this USB?

  The following would work? :

  1. stop the server

  2 boot from a Linux live DVD

  3. Insert the USB source

  4. Insert the USB of destination

  5 open a terminal

  6. start: If dd \u003d/dev/sda of = / dev/sdb (after checking admesg | grep like command course)

  7. shut down the pc when done

  8. replace the USB source on the server

  9. starting the server

  Is there anyone who has any experience with this?

  Yep - that should do it

• HP workspace: can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Hey everybody,

  Can users save files directly on their Elite x 3 HP or on a USB key using the workspace?

  Thank you

  Bill

  Yes. Users can save files between workspace of HP and the HP Elite x 3 device or on a USB key.

• After reinstall of Windows 7 Home premium, said non-genuine or product key used

  Original title: problems of activation windows 7

  I have a disc of Home premium windows 7, which has been installed on an old computer, I updated my computer, but when I reinstalled the drive, it says its does not authentic, or product key used.  You cannot reinstall windows?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Convert physical SLES of use via VMware Player

  Hello!

  At last VMware vCenter Converter Standalone Client. Any way to convert an area of SLES 11 physical to virtual for use via VMware Player? Tried with converter, but the only way I see is the VMware Infrastructure Server destination, do not. No option to choose a location of files etc.

  Have a few boxes and have to shoot down these, but want to have one... a personal access for the future.

  Any ideas?

  Thank you more, Alar.

  ... when the machine is already converted into ESX you conver it even once, when it is turned off, from ESX to WS format.

• How to check what database is used by VMware Virtual Center?

  Hello

  I recently inherited a small environment and I was asked to upgrade ESX 3.5 to ESX 4.0. I'm not a person from the database, but how can I check what database is used by VMware Virtual Center? According to the guide to upgrade the MSDE database is not supported in ESX 4.0.

  I want to just make sure that we did not use this database. I looked in the ODBC Data Source Administrator. Thanks to the system DSN, I saw that the drivers for Vmware Update Manager and Vmware Virtual Center are "SQL Native Client". Also registry editor, I watched HKEY_LOCAL_MACHINE-> SOFTWARE-> VMWARE, INC.-> VMware Virtual Center-> DB. Data on 'Vmware VirtualCenter' next to '1' and '4' is set to "SQL Native Client".

  So, how can I determine if the database used is not MSDE?

  Sorry for the stupid question, but I'm not so much with the databases...

  Thank you.

  Den...

  > So, how can I determine if the database used is not MSDE?

  MSDE does not remote databases.  ODBC Open, click System DSN, click Configure.  The listed database is that it uses, and if that is the name used for virtual center, this is the database in use.

• Best Linux o/s to be used for VMWare Server 2

  Hi guys,.

  What would be the best Linux o/s to be used for VMWare Server 2 and why?

  Are there known traps or other questions that you may have experienced with some operating systems.

  Thanks for the comments.

  I don't know about the 'best' that I only use openSUSE x 64 but I find it incredibly stable and reliable, especially when compared to a lot of Vista (out of production). Image single with 8 GB disks and non - RAID SATA with usually about 10 virtual machines running constantly. CentOS and Ubuntu seem to appear a lot here, but that could be wrong, since people in general do not post when things are working very well. Fedora seems to have arisen recently with more than its share of problems.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• A product key from an old computer can be used for vmware fusion on a new mac?

  We used to own a Dell computer with windows XP Professional OS. Lately, we have switched all of our Mac computers and no longer use the old windows computer. I have the product key for this OS and I was hoping to use the CD of windows XP on VMware fusion and relocation (in order to play video games). So far, the installation was almost a success until it would not accept the old operating system product key. Is there a way to get a new product key?
  PS The only purpose is for the PC games we have.

  can I get another free product key? I still have the old computer

  you need to know if the old pc had an O E M version of windows, because

  windows OEM versions are locked to the motherboard of the PC they where first installed at.

  If the product key you have is from a version marketed Windows (non oem) you can install the version on another pc if you take away the first pc.

  in other words, a version on a pc at the same time.

  You should check with the microsoft Web site dealing with pirated software and product keys.

• WIN a key problem in vmware workstation, using a linux machine and a windows XP guest.

  Hello

  I'm using vmware workstation 6.5 on a linux kernel 2.6.27 host and I installed a windows XP as a guest, when I press the down arrow key, think the comments is a SUPER (WIN) key, how can I solve this problem?

  but when I use rdesktop to connect at this prompt, key perform normally.

  Without more information, it is probably related to the known bug xkeymap.keycode in my computer at the moment.

  You can find a solution: HERE

  Or in the Sub-forum of the workstation, just do a search for "xkeymap.keycode" or something...

  I hope this helps!

• Reinstall Windows Edition Millennium, said COA key invalid

  PC of a friend... Original SONY VAIO with Windows ME installed... error Kernel32.dll machine crashes and makes it unusable. Owner GB midi file loaded to the top and won't lose them. SONY restore cd erases the entire disc when it reloads. Trying to recharge using the Windows 98 Startup disk and reinstall help CAB of WInME installed on hard disk for a nondestructive WInME. When loading reinstall, invalid CD key which will load on the configuration screen. Tried CD key located on the COA MS sticker on the machine, but happens too as not valid. Machine has never been worked away and 83, former owner, bought new. Ideas? Help?

  Hello

  I suggest you remove the hard drive of the machine and then connect the hard drive to another computer. In doing so, we could save the files together to the other computer or on an external drive.

  After you back up essential files, you can go ahead and run the Sony restore to restore the computer. The backup files can be restored to the original computer.

  I hope this helps.

• Update license key OEM for vmware fusion

  I'm moving from a windows7 (64-bit Home Premium) to a Mac Book. I want to import my old PC as a virtual machine using VMware fusion.

  I am trying to determine what is necessary from the point of view license.

  The original license is OEM so I think that it may have an update - is just a case of getting a new license key?

  I tried the update by using the update at any time of mechanism, but this no longer works

  How can I get the appropriate license change to allow me to get the installed virtual machine?

  Thank you!

  Hello

  Thank you for your reply and sorry for the late reply.

  You can follow the procedure referred to in article of VMware Fusion below to migrate your system of operating existing for Windows 7 to your new MacBook.

  Migrate a physical PC existing to a Virtual Machine.

  http://pubs.VMware.com/Fusion-4/index.jsp?topic=/com.VMware.fusion.help.doc/GUID-51A50557-6473-4053-81EC-9ACB40300FBD.html

  After that, get Windows 7 successfully migrated you will need to purchase a new license Windows 7 key (rightly underlined André Da Costa, OEM licenses are linked to all first computer, you install and activate Windows on).

  You need to activate your migration to Windows 7 operating system with the new license key.

  You don't need to reinstall Windows 7 when you migrate your operating system on a new computer through VMware.

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful. Please answer for any further assistance.

• Vocals and guitars/keys using multiple output

  Hello

  I intend to play a CONCERT with MainStage 3 this weekend, and I'm trying to find a way to make it work. I sing and play on the keys or on guitars. I add a few effects on channel strips in the. I know I could put just outputs of the channels output material, but this will not cause me not to hear anything.

  If question 1.
  Is it possible to send a string to two independent outputs? for example 1-2 (as my monitor) output and 3-4 for the console?

  If not, question 2
  The other way, I'd do is just send it to THE then set out ancillary differently. Then the question would be - how to send it to the pre fader? So change me the volume will not affect what I'm doing on front

  If you like my so that you got through questions, there is another question asking why my voice sounds like the choir in my ears (as if there are two entrances with a latency, when there is one) I posted it yesterday, but nobody answered yet

  Hello

  "I know I could put just outputs of the channels output material, but this will not cause me not to hear anything."

  Why you say that? Who should produce sound...

  But let´s okay focus on your question.

  Use option 2 - create a channel at concert level and name such as keyboard and output than your 1/2 material on and do as well send you want.

  To choose the post pan, fader pre or post fader, just wait click in the shipment, and the options displayed.

  

  Hope this has helped you.

• USB key used in iMac unrecognized by any other device

  Hi all, I recently encountered a problem using USB keys with my iMac 2010 10.11.3 running OSx.

  My iMac will recognize UBS sticks and allow me to save documents and files for them, but when I insert into any other device (e.g. a few friend PC and Macs, professional printers to Officeworks etc.) the USB stick is not recognized and does not see the same on their system.   Then when I insert the USB in my iMac, it is recognized immediately as well as its content.

  Before that, I was able to share files and documents with family, friends and clients on USB with no problems at all.

  I tried a variety of different USB keys (old and new) and what is happening to all of them, whatever the brand, age, size, etc.   Is produced only for a few months and at first I was in denial and thought that it was my friend PC, but now I see that it is certainly a problem with my iMac.  He may have started happening around the same time that when I upgraded to IE Captain earlier this year.

  Any ideas please?

  Thank you.

  eccydee

  The fact that this happens with different computers suggests that the problem could be the configuration.

  Go to Applications/Utilities/Disk utility. Insert your flash key and look at the settings. It may look like this:

  

  Everything on this list must be verified. While you're there, see if your USB is correctly configured:

  http://www.PCAdvisor.co.UK/how-to/storage/how-format-USB-stick-on-Mac-3434423/

• Can't hear any sound, volume keys use, etc.

  Using a retina 5 k 27 "iMac late 2015, 3.3 GHz Core i5 with Radeon R9 M395, El Capitan running. End of partitioned and installed Boot Camp with an iso of Windows 8.1 without any problem on OS X.

  When Windows 8.1 Boot Camp:

  • keys of volume and numeric keypad do not work on the Apple USB keyboard
  • No sound coming out of loudspeakers
  • cannot adjust the brightness with keyboard

  Used a free update for Windows 10 in Windows 8.1, hoping that would fix the drivers and compatibility. There can be no. Questions persist.

  I tried to download the drivers of the BCA separately, but will not yet in any download. The progress bar just sits there, about an inch long, and the estimated download time is approximately 10 minutes all the way up to 65 minutes and then again down, repeatedly. It lies over and over again with no progress. I let it sit for an hour doing it, and does not. When I tried to download page Apple support zip files and goes in this direction, the Windows operating system says that I can't use these drivers with this machine or something to that effect.

  Followed instructions from Apple to make the partition and all this BCA so I don't know what happened. After selecting the drive of the partition (I think it was number 5) during the installation of Windows 8.1, it seemed that it went well. But the context menu to reboot into OS X option was not found and when I boot in OS X, the hard drive icon to boot camp on my desk under Macintosh HD is the title of "Untitled" instead of Boot Camp? I don't know if this helps to indicate what could be the issue. I tried searching both within these boards and other places that Google provides and does not. Almost all of the results were the Apple laptops or no - 5 k iMacs.

  Help, please. And I would like to know if there is any other information, I can provide that would help.

  Certain categories of Installation and storage and USB/mouse/keyboard/Trackpad because it is both a bit.

  1. you use a wired connection to download the drivers from BC to help Wizard of BC?

  2. What is your current version of Windows OS - 8.1 or 10?

  3. What are the listed drivers Apple and keyboard and Interface devices?

  4 do you have yellow triangle with an exclamation point in Device Manager?