Description of the error activation not found

Similar Questions

• I come from components to build a new computer. Try to use the Windows XP Pro computer old version but after BIOS and XP installation I get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. "What should I do?

  New components is a new computer.
  Inserted the XP Pro CD in the drive but get the error "file not found \i386\ntkrnlmp.exe. The error code is 7. »
  Rebooted comp 5 times with the same problem after BIOS.

  Hi Milkshake83,

  Thanks for posting. Proceed as follows for this error.

  Method 1: Restore the default settings of the BIOS WARNING: this procedure may involve changing the semiconductor (CMOS) settings of the computer's complementary metal oxide and by changing the BIOS of the computer. Incorrect changes to the BIOS of your computer can result in serious problems. Change the CMOS settings of the computer at your own risk.

  To resolve this issue, restore the BIOS of the computer to its default settings. For more information about the correct settings of the BIOS of the computer and how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

  In addition, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the last update of the BIOS available for the computer.

  Back to top

  Method 2: Remove the faulty RAM to resolve this issue, remove the memory modules installed in the computer.

  NOTE: you must leave enough RAM for the computer to start and run Windows.

  For more information on the amount of RAM that is required to run Windows, click on the number below to view the article in the Microsoft Knowledge Base:

  304297 configuration (http://support.microsoft.com/kb/304297/) System requirements for Microsoft Windows 2000 operating systems

  If the error message described in the "Symptoms" section of this article appears again after removing the memory module, remove a different memory module. This procedure may ask you to restart your computer several times to identify the specific memory module that is not working properly.

  For more information about how to add and remove RAM to the computer, contact the manufacturer of your computer or see the documentation that came with your computer.

  http://support.Microsoft.com/kb/318729

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• description of the remote DB not found connection

  HII
  I have 2 database in my system (ORDB, ORCL)
  I tried to run under instruction of 'ordb' sql database command
  
  
  SQL > desc scott.emp@orcl
  ERROR:
  ORA-02019: description of the connection to the remote database not found
  
  Thank you
  
  10.2.0
  Win 7 proffesional
  
  Published by: O0O0O0O0O on March 7, 2013 15:08

  I have accepted that I'm going to need a DB link , but my question now is - why above the command doesn't have the DBLINK to gain access to another DB?

  SQLPlus command 'COPY' use connect identifiers, not the db links.

• Try to install the downloaded drivers when comes up with the error "file not found".

  Downloaded the drivers Vista for the HP Photosmart premium C410b and installation of hen comes up with the following error message: file not found

  C:/program files/hp C1164EDO-EF08-4B0B-8085-3BDSEAAEFD8D} \gup\at. Any ideas?

  Hi daddums1958,

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-84595-1&CC=US&DLC=en&LC=en&os=2093&Product=4186830&sw_lang=

  10. run the download to reinstall the printer

• When you use the copy and collect the files to the new location, I get the error file not found...

  I have 24 hours to media manage and send a feature-length documentary online instead. Everything is ready to go and so I'm going in the media project manager manage all this and I get the following error message:

  

  This is meaningless - why he's looking for the file that it is the copy in the destination folder? The file in question is not in offline mode, it is bound to correctly in the project file and reads without problems. I also tried manually copying the file in the destination folder to see if it changes anything, but no luck.

  I would like ideas, that anyone could have!

  Thank you!

  -Michael

  It seems that because the name of the file was a '-' in there. I changed the name of the file and then reconnected and it has been working fine since.

• Error 404 - not found listenerConfigure but not with the apex page

  Hello
  
  I just installed the listener APEX 2.0.1 as a stand-alone installation.
  I don't use EPG.
  
  I get the error 404 - Not Found When I pass in my browser the url:
  
  http:// < My Server >: 7777/apex/listenerConfigure
  
  but I have the correct application page when I get home:
  
  http:// < My Server >: 7777/apex
  
  Does anyone have an idea about goes wrong with that?
  
  Kind regards.

  Hello

  http:// : 7777/apex/listenerConfigure

  This URL does not exist for APEX listener 2.0.1 because the web configuration interface has been removed with 2.0. There was improvements to the command line interface to configure the listener of the APEX and there is a new interface, you can use with SQL Developer since 3.2 (current version 3.2.2 is recommended).

  Always take a glance the documentation that matches the version of software you are using. In your case, it would be the [url http://docs.oracle.com/cd/E37099_01/doc/doc.20/e25066/toc.htm]APEX earphone 2 Installation and Configuration Guide.

  -Udo

• How to fix error: "application not found" for C:\Windows\system32\rundll32.exe _

  I had the virus ' Vista Internet Security 2010 "deleted using McAfee, but now I can't start my programs and browsers because I see the error:"application not found"for C:\Windows\system32\rundll32.exe" ".
  How can I fix this problem? I use Vista SP2

  Your computer is still infected. Only McAfee will take care about that. First run .exe from Doug Knox fix:

  http://www.dougknox.com/XP/file_assoc.htm

  Then follow the instructions here:

  http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010 MS - MVP - Elephant Boy computers - don't panic!

• Error-Application not found

  I had a false alarm microsoft virus/troj or something on the computer.  Scanned with Norton and the virus has been removed, but now whenever I click on most of the applications: itunes, word, excell - it gives me the error-application not found.  I can round about still happen to these applications using recent documents, but when I click on the shortcut on the desktop or the start menu, the error message appears.  What should I do?

  First download and run this tool. Make sure you get the freeware version.

  Malwarebytes Anti-Malware
  http://www.download.com/Malwarebytes-anti-malware/3000-8022_4-10804572.html

  Restart when you remove all infected items.

  Bruce Hagen ~ MS - MVP [Mail]

• Satellite Pro M10 Hibernate - error message "the file is not found.

  I have the Satellite Pro M10. I have problem in the power of Eve v6.00.04. When I want to activate the Hibernate mode it give a massage: * the file is not found. Please confirm the name of the specified file *.

  I can't use the hibernation mode. I tried to uninstall the Toshiba power saver and install again but the massage even come. If anyone has experienced the same problem and have a solution? Please advice

  When you active hibernating the operating system creates a file named hiberfil.sys in the root of your system drive.
  Of course, this file is missing in your installation.
  You can activate and disable hibernation in the system control-> power options.
  Disable hibernation, restart and enable again. Is there an error message? Maybe your C drive has insufficient free space?
  The size of the hibernation file is different from your main memory size.

• "The expected Version of the product is not found on the system" error message during the Installation of Service Pack 1

  I got the error message 'the expected version of the product was not found on the system' when I was installing Microsoft Office Professional 2003 Enterprise Edition (Microsoft Office Outlook 2003 with updated business contact to update Manager) Service Pack 1. I wonder that someone has a solution to resolve this error message. Your help is greatly appreciated.

  Jim

  You cannot install Office 2003 Service Pack 1 when overview of InfoPath 2003 Service Pack 1 is installed

  If which are not related to the situation, suggest it ask you for help by the experts of the Officeinstallation, modernization, and activating Microsoft Office products Forum.

  MowGreen Services update - consumer safety

• ORA-02019: description of the connection to the remote database not found

  Hi all
  
  10.2.0.4 on solaris 10.
  
  I can tnsping and connect to a tnsentry in tnsnames.ora from the server, but when I use the same in dblink, get the error below:
  ORA-02019: description of the connection to the remote database not found. Here's the scenario. any idea?
  

  medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon
  
  TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 09-NOV-2011 23:49:23
  
  Copyright (c) 1997,  2007, Oracle.  All rights reserved.
  
  Used parameter files:
  /medt/oracle/product/102/network/admin/sqlnet.ora
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
  OK (20 msec)
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:49:31 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Wed Nov 9 23:59:54 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> exit
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  medt01:medtora:/medt/oracle/product/102/network/admin$ tnsping medcon
  
  TNS Ping Utility for Solaris: Version 10.2.0.4.0 - Production on 10-NOV-2011 00:00:02
  
  Copyright (c) 1997,  2007, Oracle.  All rights reserved.
  
  Used parameter files:
  /medt/oracle/product/102/network/admin/sqlnet.ora
  
  
  Used TNSNAMES adapter to resolve the alias
  Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))
  OK (0 msec)
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medts_ed/medfcv@medcon
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:07 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> exit
  Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  medt01:medtora:/medt/oracle/product/102/network/admin$ sqlplus medc_pl/medxcdsw3
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Thu Nov 10 00:00:17 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
  With the Partitioning, Real Application Clusters, OLAP, Data Mining
  and Real Application Testing options
  
  SQL> create database link med2con connect to medts_ed identified by medfcv using  'medcon' ;
  
  Database link created.
  
  SQL> select * from medc@med2con;
  select * from medc@med2con
                              *
  ERROR at line 1:
  ORA-02019: connection description for remote database not found

  Try this,

  SQL > create database link med2con connect to medts_ed identified by using medfcv ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.0.102)(PORT = 1523))) (CONNECT_DATA = (SERVICE_NAME = medcon)))';

  SQL > select * from medc@med2con;

• Error 404 - NOT FOUND when you run a form in the form of 11 g

  Hi all
  
  I had this problem when I run the forms using internet explore.
  
  I'm working on forms 11g using weblogic 10.3 for the deployment of web forms.
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  Can someone tell me where it went wrong.
  
  Thank you

  Let's start by clearing up some confusion.

  PORTS
  --------------
  Version 11.1.1.x here are how the common ports are defined by default:

  1 HTTP Server - 8888
  2 WLS_FORMS - 9001
  3 WLS_REPORTS - 9002
  4 WLS Admin Server - 7001

  So, if you understand how ports work in general, you should see that there are two ways to run a form. You can go through the HTTP server or directly call the WLS_FORMS. This means that both of the following might work, although one would be a direct path and the other is route the request through the HTTP server:

• http://ie1fdtfc5zl1s:9001/forms/frmservlet? config = frmdemo
  
• http://ie1fdtfc5zl1s:8888/forms/frmservlet? config = frmdemo

  Port 7001, will always be the port of the default server for the classic domain administrator. By default, the only thing that you can do from here is EM or WLS Console access.

  As for the question of the AMT, by default, the generator and the runtime will wait to find tnsnames.ora in hospitality \config Instance so be sure you add the correct entries to the correct file.

  You can hardcode a path to the file you want to use by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN = C:\Oracle\mytnsdirectory). This will only apply to execution of forms and not the manufacturer.

  Also, here is something that is often a source of confusion for many people... just because you started your form in the constructor does not mean that the form running has nothing to do with the manufacturer at this time. In other words, when you click RunForm button in the constructor all that you do is pass a url in a browser. The browser and the form do not use the constructor parameters except that can be passed in the URL (e.g. name of user and password). Running of all forms are considered to be 'runtime '. This means that all information environment to an active form configuration must be defined in default.env. The manufacturer, on the other hand will be based on the system variable, the Windows registry (or shell if under Unix).

• The name of the tag: "embed" not found in the currently active versions

  How can I remove the error message displayed in it Validation of Dreamweaver:

  The name of the tag: "embed" not found in the currently active versions. [HTML 4.0]

  Extraction of tag reads:

  < embed src = "about.swf" width = "615" height = "262" loop = "false" align = "absmiddle" bgcolor = "#FFFFFF" name = "about" allowscriptaccess = "sameDomain" allowfullscreen = "false" type = "application/x-shockwave-flash" pluginspage ="http://www.adobe.com/go/getflashplayer_fr" wmode = "transparent" quality = "high" >

  Use the modern techniques of the recess.  Here is a link to one of the newest...

  http://code.Google.com/p/SWFObject/

• all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

  all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

  One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • http://KB.mozillazine.org/Error_loading_websites

  You can try to reset (power off / on) of the router.

• I try to start the old T2150CDT - error message "not found reading drive C of the sector.

  Hello

  I came by one of them and trying to fire, but I get the message, "sector not found reading drive C". I get this message just after windows 98 logo appears.

  Problem is that I am limited in what I can do, because I don't have a floppy drive and back does not recognize the CD drive (missing drivers); Although I can hear it when starting upwards.

  So I out the HARD drive and pasted the installation windows 98 inside files. then tried to reinstall, but I still have the message of "sector not found reading drive C". The drive is too large (it's about 2.1 GB.)

  Install the right drivers for the CD Rom would allow me to install from a CD?

  It works usually
  Thank you
  John

  As far as I know the error message; "Sector not found reading drive C" appears because of these three reasons:
  -physical HARD drive failure
  -corrupted HARD drive file system
  -Bad RAM

  In the first case, you should try to format the whole HARD drive and should try to install the new OS.
  If it will not help, chances are that HARD drive is malfunctioning and needs to be replaced.