Designate the VLAN for the clones linked on a network interface

Similar Questions

• Best design for the use of 8 physical network interface cards on a 5.1 ESXi host

  I have 8 physical network cards to work with on and 5.1 ESXi host using Enterprise Plus license.  I need to repair the following traffic:

  Management traffic

  vMotion traffic

  Virtual machine traffic (probably 2 natachasery will suffice for this)

  NFS traffic

  Won't fault tolerance.  Natachasery-how much should I dedicate to NFS, vMotion, and traffic management?  What failover policy I should use (active / active) (active / standby) for each?

  It is business more licensing and vSphere distributed switches are used.

  Thank you

  Yes, I would put the backup in the switch as well as management traffic and vMotion is they use vSS or vDS. The other option would be to reduce your vDS for NFS traffic of 4 natachasery 2 natachasery and then or to add to the existing vDS that contains management and vMotion VM traffic to add it extra bandwidth or create a new vDS with these 2 natachasery. But at the point of my original thought around creating a vDS is based on all of my bandwidth throwing together and then cut it but I want it and do not have to trade around natachasery after the fact. But there are so many different ways to achieve that is the fun part.

• How to configure the VLAN for Cisco SG500 - switch 28

  Hello

  First of all, it's my first post here, I hope that someone can help me and please be patient because I am very little known.

  OK, so let me explain to you the scénarion I face and I hope someone can help me.

  We have a Cisco SG500 - 28 port gigabit switch in our workplace.

  Our goal is to create 3 VLANs and separate networks between the various departments.

  Vlan1 (which is the default VLAN in the switch)-will be used for the COMPUTER service and management.

  VLAN100 - will be used for business.

  VLAN200 - will be used for clients who need to connect to internet via WiFi.

  I created VLAN100 and VLAN200, and VLAN1 is there by default.

  I want to use port 13 for VLAN200 and to connect the-Wifi access point there.

  The uplink is in port 25.

  I would be happy if you could explain things first to a more general, abstract level, and then we can look at the specific scenario that we have.

  SG500 Cisco - 28 Gets a Sophos UTM 9 router internet.

  I need to take care of the inter - VLAN routing so, subnet and DHCP

  Thanks in advance,

  Sincere greetings,

  D

  Hi Desmond, looking at this DHCP pool it looks correct.

  For the second part, you waant VLAN 200 only work on VLAN 200, that's fine. So if you have an access point, and everything on the VLAN 200 connects to the access point, you can make an access to this list. The access list is entered only, which means the inbound interface.

  So if you have a gateway connecting to #1 port. You'll need to build the access list and apply it to port number 1. That's assuming you make a list of access 'decline' subnet source IP of VLAN 200 destined for the other subnet, that you do not want access.

  The image on another post to fill out your reference numbers, then for the ACL link, it should be placed on the interface VLAN 200 first comes to the switch (IE, the port the access point connects, make sure that you choose to bind by port instead of per VLAN)

  -Tom
  Please mark replied messages useful
  http://blogs.Cisco.com/smallbusiness/

• Wait for the operator on the Clones Script related.

  I have a script to create linked clones (credit goes to the members of this forum to help me to do things), but I have problems with customizing the script tries to apply the customization until the clone is complete and I get the following:

  Script:

  to connect-viserver 'vCenter.

  
  

  $strtemplate = Read-Host "Please provide a model to create Clones related to:

  $strVMName = Read-Host "Please provide a Naming Convention, (Ex: CTX #).

  $strStart = Read-Host "Please provide a Naming Convention number from (EX: 1 = CTX1)"»

  $strEnd = Read-Host "Please provide a Convention assignment of names ending number (EX: 3, will create CTX1, CTX2, CTX3)".

  
  

  $intStart = [System.Convert]: ToInt32 ($strStart)

  $intEnd = [System.Convert]: ToInt32 ($strEnd) + 1

  
  

  for ($i = $intStart; $i - lt $intEnd; $i ++) {}

  $sourceVM = get - VM $strtemplate | Get-View

  $cloneName = "$strVMNAME$ I".

  $cloneFolder = $sourceVM.parent

  $cloneSpec = new-object Vmware.Vim.VirtualMachineCloneSpec

  $cloneSpec.Snapshot = $sourceVM.Snapshot.CurrentSnapshot

  $cloneSpec.Location = new-object Vmware.Vim.VirtualMachineRelocateSpec

  $cloneSpec.Location.DiskMoveType = [Vmware.Vim.VirtualMachineRelocateDiskMoveOptions]: createNewChildDiskBacking

  $sourceVM.CloneVM_Task ($cloneFolder, $cloneName, $cloneSpec)

  Sleep 10

  Set-VM "$strVMNAME$ I"-OSCustomizationSpec "" CTX-customization-confirm: $false

  Start-VM "$strVMNAME$ I '-RunAsync-confirm: $false

  }

  The error:

  Set-VM: 25/01/2012 17:13:24 Set - VM, the object has already been dele

  Ted, or not completely created

  To C:\Users\lpalacio\Documents\Scripts\VMware PowerCLI\Create-link - Ask.ps1:21

  character: 12

  + Set - VM < < < < ' $strVMNAME$ I "-OSCustomizationSpec" "CTX-customization - co

  nfirm: $false

  + CategoryInfo: NotSpecified: (:)) [game - VM], VimException)

  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomatio

  n.ViCore.Cmdlets.Commands.SetVM

  Is there a way to tell the script to wait until the clone is finished? I know I can use a sleep command but not all clones will take as much time to complete.
  Thank you.

  You can try to wait here it is finished

  ...

  $taskMoRef = $sourceVM.CloneVM_Task ($cloneFolder, $cloneName, $cloneSpec)

  $task = get-views $taskMoRef

  While ("running", "pending" - contains $task.Info.State) {}

  $task. UpdateViewData ("Info")

  sleep 5

  }

  ....

• Please give me the download link for md313 training camp.

  Please give me the download link for md313 training camp

  
  

  Unfortunately, I can not find this file.

  Please help me.

  Hello alireza2003,

  Thank you for using communities of Apple Support.

  I don't know what exactly you are trying to accomplish, but if you download Bootcamp for Windows 8.1 support software, and then follow the steps below.

  Download the software supported for Windows 8.1 or later

  1. Make sure that your Mac is connected to the Internet.
  2. Open Boot Camp Assistant, located in the Utilities folder of the Applications folder.
  3. Uncheck all options in the Boot Camp Assistant window, except the ability to download the latest version of Windows software Apple support. Then click on continue.
     If you don't see this option, choose Action > download the Windows Support software in the menu bar.
  4. Make sure that your USB flash drive is displayed as the destination drive. Click on continue, and then enter an administrator name and password, if prompted. Boot Camp Assistant then downloads Windows supported software for this drive:
     

  Problems?

  • If the wizard does not see your USB flash drive, click Go Back and make sure that the drive is connected directly to the USB port on your Mac, not to a screen, keyboard or hub. Disconnect and reconnect the drive, then click on continue.
  • If the wizard says that your USB key cannot be used, ensure that it is properly formatted.
  • If the wizard says that it cannot download the software due to a network problem, make sure that your Mac is connected to the Internet.
  • If the wizard says that the Windows support software could not be saved on the selected disk, make sure that your USB has a capacity of storage to the last 8 GB.

  If you do not see some Mac functionality if you are using Windows on your Mac

  Take care.

• Unable to find find the Canvio link App in the app store for Google

  I had to update my android phone, but can't find the Canvio link App on the app store for Google. If it has changed?

  I searched in Google Play Store app CanvioLink too and I could not find this app.
  It seems that this application is no longer available and it has been removed from the PlayStore.

• Phone numbers contained in the e-mails and the web links will appear for several seconds and then disappear. I use Yahoo mail, however, if I use IE 8, the problem does not occur. Help!

  Phone numbers contained in the e-mails and the web links will appear for a few seconds and then disappear. I use Yahoo mail, however, if I use IE 8, with Yahoo mail, the problem does not occur. Help!

  This has happened

  Each time Firefox opened

  Is whenever I use Firefox

  Tools > Addons > > Extensions

  You have the Skype for Firefox extension?
  If so, disable it. Known to cause this problem for many users.

• I need the download link for windows XP home Edition ULCPC royaltek.

  I need the download link for windows XP home Edition ULCPC royaltek.

  I have this windows with my laptop, and I have the key

  There is no download link. You must contact the manufacturer of the computer.

• Quick start for T420s - where is the download link?

  Hello

  As the title suggests the download link was fired for RapidBoot - why?

  I can't find anywhere?

  Can you tell me a direct link for the 64 bit version of Windows 7 or tell me why they just pulled on it?

  Thank you

  Hi DangerMouse,

  He's been fired from download sites. Please see this thread in the ThinkVantage Board.

  Sorry, it's probably not what you wanted to know

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• Could not find the download link for windows media playe 11

  Hello

  I visited the following web pages to download windows media player 11 for windows XP, but I am unable to do:

  1) http://windows.microsoft.com/en-US/windows/downloads/windows-media-player

  2) http://windows.microsoft.com/en-US/windows-xp/help/windows-media-player/11

  Please can someone help me find the download link.

  Thank you

  Assem

  You are in the search not very hard... Here is the link: http://www.microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=1d224714-e238-4e45-8668-5166114010ca

• Please give me the download link for windows VISTA oem

  Please give me the download link for windows VISTA Home premium 64 & 32 BIT please, are the links for oem? I need OEM. I got the license but no installed operating system and therefore cannot know which of the vista is. You know a way to find the license of numbers/letters, please. Thank you for your valuable contribution

  Best regards

  Gerry

  Hello

  If Vista is preinstalled and is not bootable, contact the computer manufacturer and ask them.

  You should have a SN (serial number) on the case.

  There is no Windows Vista downloads available from Microsoft.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• The download link for the update of the bios dv2745se (sp52272.exe) died

  Where can I find an alternative link so I can update my bios?

  I searched for the last 3 hours.  Any link that I find towards me the dead link.

  Help, please!

  Hello

  See if this link works.

  http://ftp.HP.com/pub/SoftPaq/sp52001-52500/sp52272.exe

  Kind regards

  DP - K

• Where to find the download link for msert.exe (Win7 home 64 bit)?

  I would like to know on where to find the download link for msert.exe (Win7 home 64 bit).

  Does anyone have any suggestions?

  Thanks in advance for your suggestions :>

  Hello

  There is no direct link to download the Microsoft Safety Scanner. You will need to download it according to the type of operating system you are using. You will need to download the Microsoft Safety Scanner from the link provided by George.

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Change of ISE of the VLAN for wireless settings

  Hello

  I configured on ISE posture strategy for posture compliant and noncompliant to endpoints, such that endpoints compliant posture will fall in VLAN clean and not conform will fall in others.

  Now, my question is, even if an end point is consistent, it is not in VLAN own posture. To get the ip address of VLAN, it requires enough ipconfig and ipconfig / renew to do manually.

  How to solve the problem...

  Kind regards

  Aditya

  If you assign a VLAN, the final step for the PC client to renew its IP address. This step is performed by the portal of reviews for Windows clients. If you have not defined a VLAN for the 2nd AUTH rule earlier, you can skip this step.

  If you have assigned a VLAN, complete the following steps to enable the renewal of the IP:

  1. Click Administration, and then click comments.
  2. Click settings.
  3. Expand comments, and then expand Configuration multi-portail.
  4. Click DefaultGuestPortal or the name of a custom portal that you created.
  5. Click the DHCP Release VLAN check box.