Designjet T1100: Print multi-passages

Similar Questions

• ERROR MESSAGE 86:01 PLOTTER HP DESIGNJET T1100

  Hello

  I have a hp designjet T1100 plotter, I almost never use it, and when I use it, it's a problem for me! Last week I was printing of plans when he started to give problems... To start, it took a long time to print a map and it prints wrong. I tried to restart, but the plotter decided not print others. So, I decided to turn off the machine for that day here. All of a sudden, the next day, when I tried to print other plans; the plotter print plan the previous day correctly, but it didn t feel more...

  When the plotter was printing of plans, it makes a strange noise, which I had never heard. Finally, it showed the following error message: "86:01 probably paper jam. But I checked it and the book has been authorized. I tried to replace the roll paper again and I rebooted again, but the plotter still shows the same message, and I couldn t continue plotting. In addition, when I was checking the paper jam I found a "strap" (I m do not know if this word is okay) that looked as if it was broken. Perhaps, it may be the cause of the problem, I don't know Don t. I feel fed up with my eyeliner! I am attaching the picture of the "strap."

  Sorry for my English, but for me, being able to talk about this topic in another language different to mine it s very difficult!

  Thanks in advance.

  That "strap" is the timing belt. It should be replaced because he is the cause of the error 86:01. The link is for the belt of 44 ". Do a google search if you have the model 24 ".
  
  http://www.Amazon.com/carriage-drive-Designjet-T1100-44inch/DP/B00HNTOCJQ

• Designjet 111 - printing problem

  My Designjet 111 printed 6843 pages. Almost all were 24 "x 36" CAD. Changes of cartridge & usual ink print head.

  Two days ago the plotter has stopped printing. It was a pdf CAD and got about 1/2 ", then stopped.

  Maintenance of the 532 system error codes:

  # 0, 86.11 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0794)] 10/04/2014 Page # 6844
  # 1 S.06.04 SM 02.01: 01 [isp_mech (MechCommand.c: 0789)] 10/04/2014 Page # 6844
  # 2 S.06.04 SM 86.11: 01 [isp_mech (MechCommand.c: 0794)] 10/04/2014 Page # 6844
  # 3 02.01 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0789)] 10/04/2014 Page # 6844
  # 4 86.11 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0794)] 10/04/2014 Page # 6844
  # 5 02.01 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0789)] 10/04/2014 Page # 6844
  # 6, 86.11 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0794)] 10/04/2014 Page # 6844
  # 7 02.01 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0789)] 10/04/2014 Page # 6844
  # 8 86.11 S.06.04 SM: 01 [isp_mech (MechCommand.c: 0794)] 10/04/2014 Page # 6844
  # 9 S.06.04 SM 02.01: 01 [isp_mech (MechCommand.c: 0789)] 10/04/2014 Page # 6844

  Code of error starting Track = 167 = init PrintHeadControl

  I put in four new print heads with the same result

  Changed the ink also.

  Not sure whatelse to do to get the tracer is going?

  Any help would be greatly appreciated

  Roger

  SOLVED

  You have a printer independent guy tech $80, which has stripped the DJ11 and cleaned, inspected all parts.

  Nothing broken just a lot of cleaning.

  Head of transport that reads the MICR band was dirty.

  HP support (Vijay in India) was useless

  Hope this helps some other users DJ11

  Roger

• impression of Pro to Z5400 Designjet HP printing problem

  Last October, I bought a Postscript Designjet Z5400 printer. On both CD and software down loaded from the Web site called "HP printing Pro" produces an error on the screen of the printer "Incorrect, impossible to print file Format". This happens with. JPG. PDF and. TIF (any graphic file) files.

  The printer precisely will not respond to the controls of Photoshop CC either. Try to compose a set of 5 "x 7" photos in the upper part of a 36"wide roll of results of paper in the images printed on one side of the paper with massive losses." The problem seems to be that the printer will not allow a page size to create what is shorter than the width of the paper.

  I have been in touch with HP about this and offered a refund, even if I sent my own to the printer, not me Bank evidence. Answers like "It's a HP offer for you, not the finance co" suggests HP trying to me to commit larceny as a custodian... A criminal offence.

  I did not buy this printer for a refund, I bought it for a living with. Twice now, I tried to access the part "next day guarantee support" of the Pack in customer care, I paid an extra $1200 for and not received a response.

  I am able to print to this printer, but not using the software from either HP or Photoshop CC. Any help here as to who speak for the "next day" service, I bought or the highest level of management, I can access complaint with all the terrible service, I was making would be apreciated. I have a video broadcast quality of the mess that occurs when you try to use this printer, but I hesitated to post publicly until a person at HP has actually been and looked at the problem. It's either the printer or the HP software cause.

  Thank you

  Ryadia.

  Hello ryadia,

  I just sent you a private message.  If you are unsure how to check your messages from the forum, this post has instructions.

• Designjet 500 prints on usb but not ethernet

  I inherited a DesignJet 500 printer 24 in. I can print so that I am related to him by a USB cable but when I try to set up on my network, I can't print to it across the network.  I can ping the JetDirect card and can telnet in as well so I know that I have the correct IP address and it the card itself can communicate with my network.  I use the same driver via the USB port and the network port but still unable to print over the network.  Any ideas why I can connect to the printer on my network, but I can't print on it unless I connected locally with a USB cable?  I tried with a laptop running XP32bit and Win7 64 bit with the same results.

  Thanks for the help.

  Thanks to the entrance to the Forum of commercial products.  BTW, I discover to my problem.  It looks like the problem was the cable used to connect to my network.  One of the things that I should have checked first, but don't have.  After replacing the cable, I was able to print from the network to it.

• I use a PDF file extensively on my computer and assumes that the PDF is more native to Evernote, it apparently really is. I just installed Adobe Acrobat DC and its Virtual PDF printer. But, when I went to print multi-page documents, the printer would be o

  I realize that it is a forum for Adobe, but I imagine there are many people here who use PDFs on Evernote. Unless there is something I don't really understand, it seems that you can copy a PDF of several page on Evernote, but you can retrieve only the first page on a virtual printer Adobe for Windows. Can anyone suggest something I should do?

  I have a neurological disease and an accumulation of documents on Evernote. Most of the documents have been given to me by a doctor, I have them scanned in PDF files and read these files in Evernote. I just assumed that when it came time to take the documents to a new doctor, I could print them. But, when I went to print multi-page documents, the printer would only print the first page and ignore the rest.

  Sounds like you have a problem with EverNote, not Acrobat. Acrobat prints being told to print, it does not stop after the first page.

• DesignJet 5500: print head print test very good page, but I still get the error message to replace the printhead

  On my DesignJet 5500, I rswitched the ink tubes, printheads and printhead cleaners dyeing anti-UV, 81 to 83.

  I got an error message saying that the black print head needed to be replaced so I bought another head black printing and after that, I was able to print a test page that shows all the colors (image quality page?).

  Magenta not give not any code of error before, but now I get an error message saying that the printhead magenta must be replaced, even if magenta print well on the printed test page.

  Hello

  The printer give you a warning when the health of the print head is low, but it will continue to print.

  If the problem has been solved after all print head replacement can be that a print head cause others to fail

  Or, just a few bad print heads

• HP Designjet T2500: How can I scan documents without using the main table with the HP Designjet T2500 printer?

  Hello, in my office we recently bought printer HP Designjet T2500 and, so far, works great but I have a doubt with the procedure of the Analyzer in the case where the main panel is malfunctioning. How can I scan a document without the help of the main panel or a plan?

  I know the printing can be done with the supplied software, but he made no reference to the case where we need to scan a document.

  Any help will be great, thank you.

  Hello

  Analysis cannot be done froom the front panel of the printer.

  If you have a problem with the Panel, you will need to repair the device because you won't be only able to scan, as you will not be able to load paper or calibrations.

• DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10

  Several problems to the upgrade of WINDOWS 7 for WIN 10.

  The HP DesignJet is 'offline' and can't figure out how to change the setting of "online."

  The definition "print directly to the printer" is not.

  Yellow flashing on the printer dashboard - magenta ink cartridge shows empty, but it is full.

  Computer HP printer installed - poster is in the Device Manager - watch "this device is functioning."

  Printer is listed in devices and printers.

  HP Support Assistant doesn't recognize - printer in the list, can not find device during an attempt of "add design.

  Printer turns off or recycle off on after turning on.

  Hello

  If you have a driver problem:

  Remove the driver completely from the computer, then download and install the lates driver.

  Here is the link incase you need

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4123145 & swLangOid = 8 & swEnvOid = 4192

  Now, the yellow light flashes on the Panel means that the printer needs attention, like:

  -Close coverage which is open

  -Of paper

  -Paper tilt

  -Jam

  -An error code

  If you have 6 columns on the levels of ink instead of 4 is because you have an error code.

  On the following link, you can find more information on how to prepare the error codes

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=352387 & docid = emr_na-bpp03841

  If you have an error code, the printer appears offline on your computer.

  On this other link, you will find how to check other messages on the printer

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01669949

• Request for help with my HP Designjet 130 printer

  Greetings,

  I have owned, loved and used my printer Deskjet HP130 for sixteen years now. I do not use and would like to know if you are able to exchange for another product of your company (HP - printer, laptop or other digital material).

  My contact (deleted content)

  Kind regards

  Paul then

  You must search the HP of the trade program in and then see if there is an another DesignJet you would like to have.

  HP generally offers commercialized ins on upgrades in the same line of equipment.

• print multi page emails

  I often get e-mails from family and friends page multi and now I can print only the first page... Its a terrible bind as we work on a family tree! I hope someone can help.
  Thank you!

  You didn't mention what email program you use. Whatever it is, ask in this forum.
  He is not related to the hardware and drivers.

• Windows 7 printing with the HP DesignJet 4000ps printer. PLT files

  I have a bit of an interesting problem. Our HP Designjet 4000ps is connected to the network and available via a windows print server or directly via the IP address.  To print our files .plt CAD, for years, I simply added an action to the. PLT file type association to run a batch file by default so that when I double-clicked on a .plt file, it could be copied by the script for batch processing on behalf of the plotter print queue. It worked great until upgraded to Windows 7.  Now when I copy a .plt file to the print queue, the name of the document in the queue of work just appears as a work #xy and has a date unknown and no username listed. The same thing happens if I used the FTP for the tracer to place the file, however to track down an old XP machine and verification of my batch script as well as the method of FTP, the name of the document, date and user name all appear incorrectly in the work queue.

  If anyone else has experienced this? Is this something the way that Windows 7 print spooler works? Is there a way to fix this? If I use the interface for Server Web Designjet 4000ps to send files, everything is correctly listed. This happens only when I'm attemping to copy the file directly to the queue or using FTP on Windows 7.

  David

  Hi KroBaar,

  The Designjet is a commercial product.  I you a link towards the Designjet forums try to repost your question here for better coverage.

  Designjet Forums

• HP DesignJet T120 prints blank Pages with software of CAD DraftSight

  Hello

  I grew up this question with the DraftSight support as well.  They are currently studying the issue, but I doubt very much they can do about so I wanted to get feedback from the HP support as well.  Basically, the problem is that I can't print using the HP DesignJet T120 and CAD software free DraftSight.  The job is sent to the printer, but the pages come out blank.  I was hoping that if someone can also confirm this behavior or help me solve the problem.  Here is some information on my situation:

  1. I can print other software for the T120

  2. I can print draftsight on another printer (Toshiba e-Studio 281)

  3. my system configuration:

  -Windows 7 x 64

  -Printer connected via usb

  -Use the latest printer drivers for T120 (61.124.1518.100)

  -DraftSight V1R3.1 x 64 http://www.3ds.com/products/draftsight/download-draftsight/

  4. I tried the method of pilot alternative described in http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/How-to-Assign-Alterna...

  but it is not really one another driver I can choose.

  I appreciate all the help and feedback!

  Thank you!

  I'm linking you the Designjet forums below. Please just transfer your question on the forums of Designjet.

  Designjet forum

• Designjet T520 printing with ink cartridge empty

  can a t520 print (black) even if a color cartridge is empty or the printer stops all functions until the replacement of the cartridge?

  We intend to replace a hp not by a T520 tracer (go maybe later us to the 2500 series) and especially question is a "decision point" for "buy or not.

  Thanks for any official information on the subject.

  Best regards / WAG_Frutigen

  This forum focuses on the level of consumer products.  For the Designjet that you can have better results, post in the forum HP DesignJet here, this is where the DesignJet experts.

• HP Designjet 500PS: printer HP Designjet 500PS memory

  Whenever I try to print large documents to my tracker I get 'out of memory' error, I have 128 MB installed

  Right away. Anyone know if I can install more than the stick memory 128 MB?

  Hi karabith,

  According to the specs, it seems that 128 MB of memory is the maximum that you can install.  Designjet 500 series memory

  Here is more information about the memory usage and run out of memory:

  Memory problems

  I hope this information helps!