Designjet T610: Designjet T610 of ink
I bought a T610 24 '' used tracer. Downloaded the driver from HP. Installation disc was not included. Connected with the USB 2. The printer is out of ink Cyan. Waiting for a new arrival. Have not printed anything yet, cause it does not print when I try.
It's as if the printer is not related to my office.
Is it because it's out of ink? There is no message or error code, just cartridge is empty.
Any help is appreciated.
The printer does not print anything unless the full set of cartridges are installed. Once you get the new ink, it allows to print without any problems. Just make sure the driver is installed on your computer has USB port selected.
Tags: HP Printers
Similar Questions
-
HP DesignJet Z6200 plotter ink error - ink appearing
I print the cards on a large scale on a plotter HP Designjet Z6200 and ink blots are appearing on the side. While the tasks are not printing itself, it always indicates an error. In addition, on diagnostics test print only, some of them does not appear (it is not on any other impression here yet).
Ink absorber?
Clean print heads?
Any ideas?
Hello
You have a bad printhead.
If they are under warranty, call HP, share these photos and ask for replacements.
If they are not in warranty, you can purchase them directly on any store reseller or HP.
I will recommend you to stop printing until you replace the print heads, because you may damage the maintenance cartridge, the vacuum system, contaminating the milling table, etc., everything about contamination due to a leak of ink.
I hope this helps
Best regards
Mike G
-
Designjet 110 more ink problem
I have a Designjet 110plus, model #C7796D. I use Windows 7 Home Premium.
I'm having a problem with the icons of ink on the display screen.
When I try to print, the magenta icon flashes and empty bed even if there seems to be a lot of ink still in the cartridge. I installed a new magenta cartridge and the complete play icon, but when I tried to print it changed again to blink empty. I changed all the print heads and the test came back spent with a cheque in the lower right.
In searching the Internet, anyone else had this problem posted in 2009 with no resolution of the problem.
All the help online, that I could find, the problem may be with the ink supply station. When I removed all the cartridges, there is some spring loading white tabs at the bottom that appear after removing the cartridge. One for the magenta doesn't appear. I can remove by force the
tab, but it falls right back down. If I change the ink supply station, can I still get the part and it would be a plug-and-play solution that can manage an average handyman?
Thanks again David for advice.
I bought a supply of ink online station. Followed the instructions you provided and replaced the unit with no additional parts or screws left over. And 'Voila' it works!
Sort of.
The screen still shows power of magenta ink as empty. I ran a test print head alignment, all the colors print fine and it passed. At least not flashing so that now the printer prints the whole page without stopping. YES!
I consider the problem solved!
Thank you for your help,
David
-
HP DesignJet T510: HP DesignJet printer cartridge faulty reports T510
Hello HP,.
I have a HP DesignJet t510 giving faulty cartridge error.
I changed all the cartridges but still does not work.
I need help to solve the problem.
Thank you
John
Supplies of Havilah
P. o. Box 185 AM
Amasaman, Accra
Ghana
Te: 00233208433199This is the old method that is still used with some inkjet home printers. Printers Designjet need much ink, so the current design of the print head filled by Assembly of the tube and large ink tanks is common for all designjet printers. You don't like the design, but it is more economical because the printing heads last longer than ink. You will have to pay more for ink cartridges that contain the printhead. Your argument is outdated.
-
Designjet T610: Designjet t610 ink level
MY Hp Utility not keep track of ink for me more. It says "not available". He is not on a network and is connected via the USB port. I really need this app to work! I don't want to have to go to the printer every day to check levels. I want to be notified when the ink level is low. It happened when I recently got a new computer. The tech store downloaded drivers current of the internet. I hope someone can help. Thank you!
You can continue on your new post
Yes, I'm sure.
I believe you than that used to work before, you try to get a computer with the OS sate you used to have to try and mimic the environment?
-
DesignJet plotter: ink cartridges T610
For the T610 ink cartridges can be used after the expiry date on the packaging or expired cartridges will damage the print or machine heads? Thank you.
Mysef using inks expired for more than 12 years and never have a problem. I mainly photos, posters, giclée print
print... Currently, I have DJ500, DJ800, Z2100, Z3100, Z3200...
Use only inks from HP, even expired...
never use these so-called remanufactured or refilled inks... but if you can print something not important or simple
color... maybe ok...
-
Designjet T610: 24 "waterproof or water-resistant paper roll
Does anyone know if waterproof or water resistant paper is sold in rolls 24 "wide with a 2" base for my Designjet plotter? Had no luck finding one. I just bought this used tracer.
Thank you
Check the following two on Ebay & around $60 with shipping.
Premium Glossy Photo Paper Roll inkjet canon hp epson photo RC
I also tried the photo paper glossy HP pigment daily & water launched on it. Pass.
After printing, wait longer and better.
-
Design Jet T610: Designjet T610 noise deaf when printing
Recently, we had our belt changed and now there's a THUMP from the right side of the printer. It was printing normally with the noise for several months. WE do not often use it. It has become a noise problem. It's a thud coming clearly from the right side, but it is still printing is not the print head.
Any ideas?
I will private message you a link where to find the Service Manual - of the socket replacement procedure starts on page 6-137. the video is wrong in detail on the importance of this piece, but at least gives you an idea of what you would be facing.
-
We recently purchased a printer large format, the Z6600 and it came with a Cyan ink cartridge. I'm having a hard time finding a replacement of the cyan cartridge. I don't see Light Cyan for the purchase of supplies.
Hello Advertisingblue,
I referenced the user for the printer HP Designjet Z6600 Production guide and found the following list of cartridges:
HP 773 has 775 ml black matte of Designjet cartridge C1Q21A ink
HP 773 has 775 ml of ink Designjet Magenta cartridge C1Q23A
HP 773 has 775 ml of ink Designjet yellow cartridge C1Q24A
HP 773 has 775 ml of ink Designjet Cyan cartridge C1Q26A
HP 773 has 775 ml Photo C1Q27A Designjet black ink cartridge
HP 773 has 775 ml of ink Designjet gray cartridge C1Q28A
For the cartridge Cyan (C1Q26A), I found the following reference to the command:
I hope this helps.
Kind regards
Lynn_B -
Designjet Z2600: Questions about head of ink and printer maintenance
We have recently acquired a printer, Designjet Z2600 24 "large format. A few questions so we can know what to expect:
- Dry ink: A colleague suggested that dried ink can be a problem if the printer is not used frequently. We plan on it using every two weeks, but there may be times when a month or two will pass between uses. Is this a problem?
- Print heads: will be the printer alert us when they need to be replaced or should we look for quality defects?
- Management of ink: before printing, the printer will be well estimate ink necessary for work and alert us if we need to insert the new cartridges before employment passes by?
Thank you!
Hello
The recommendation is to keep it at any time.
If you use the printer turns off completely the power button.
When not in use, it will go in standby mode, wake up maintenance and sleep.
-
DesignJet 130: what should look like a NEW Assembly of ink for DesignJet 130 tube to
I ordered a new Assembly of tube of ink for DesignJet 130 from an online source. The item is marked refurbished. Frankly, it seems not yet to have been refurbushied but just pulled an old printer (but that didn't matter that I was expecting again), but it did lead me to ask a slightly silly question.
The tubes in a new assembly have preloaded ink in them? I guess not, but when I locate a set of 'new' I don't want to jump to a false conclusion so filled beforehand with ink. I guess they must be clean, dry, seems to have never been filled, and not overflow but I thought I would check.
I'll get my money back and try again. I guess there are some spare parts new surplus stock for this printer floating around. I was wrong in my assumption?
Concerning
New tubes of ink are empty, I installed came with setup printheads.
If my post is solved your problem and click the accepted as button solution under him.
In order to thank a Tech for a post click the thumbs up button under the post.
You can even click on the two keys... -
DesignJet 5500: Where can I download the media for ink UV #83 profiles?
The links below allow you to download media for DesignJet 5500 profiles. First you must choose your computer operating system. If you select Windows 7, you won't see listed media profiles. If you select Windows XP, you will see 10 types of listed environments. If you click on one of the listed media types, then look at the file name to download, all file names have "dye" in the name of the file. Where can I download profiles of supports for UV #83 inks?
HP download page for media for inks Dye #81 profiles
For 5500 HP media profiles page
http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=82231 & swLangOid = 8 & swEnvOid = 228
-
Ink tube leaking Designjet 1050c
My Designjet 1050c is leaking yellow ink coming out of tube under the prinheads jets. I took the whole hose out of the printer (per instruction manual). My question is, these nozzles can be replaced at the end of the tubes verses buying a whole new tube Assembly? $300 + est a lot of money for a full game when you need only 1 nozzle or 4 new ones.
Here, any help would be greatly appreciated.
I think I'll be in good shape now... I figured out how to get the fixing of nozzle apart without destroying it,
AND... NOZZLES, I FOUND ON EBAY FOR $18.00... !!!!!!
-
HP designjet 130nr: CARTRIDGE of black INK HP 130 NR
Does anyone know how to get cardidges of ink for the HP designjet 130nr printer? It seems that any working on the market! All links will be very wellcome. Thank you.
PROBLEM SOLVED! I found a supplier for Europe. Thanks a lot everyone.
-
How to obtain warranty support - ink cartridges for DesignJet z3200
I have a HP DesignJet z3200 only two colors of ink (MK / LM) stopped printing. The diagnostics say there are still a lot of ink in the cartridges and they are still under warranty, but when I try to get a warranty support via the Web site it does not get additional information (email or phone number). Does anyone know how to obtain warranty support for ink cartridges?
Thank you
Support for your product number is 800-334-5144. I am also including a link to the support page Hp that list of e-mail and telephone contact information.
Maybe you are looking for
-
I keep getting FF or error that responded to the questionnaire. When I close it I get "your FF profile cannot be loaded. I read about the removal of the parent.lock. When I try to delete told me "can not delete the file because it is being used. So w
-
I have land in Facebook when I try to go to Google. How can I stop this?
While, not more of the time, my Firefox version 18.0.1 takes me to Facebook when I try to go to Google, or try to refresh when I'm already on a Google page. When this happens, it does not matter if I enter the URL, Google Google Google and click on t
-
Monitor turns on every morning at 6, how to stop this?
My monitor on my desktop goes on every morning at 06:00 how can I turn this off, because it is an unwanted wake-up!
-
Don't know if this is the right place, but here goes: I've shot a few videos using my Canon digital camera and downloaded on my computer. Is there a way to combine the four short files into one and then maybe make a few changes, such as the removal
-
My Xperia Z3 Compact reset factory default in my pocket... "The screen is locked and the Strip option" twice on the screen to wake up "disable. There is a drop-down list of the button to reset the phone?