Designjet T610: 24 "waterproof or water-resistant paper roll

Similar Questions

• Water-resistant IPhone 6s, hoax?

  "I've heard many blogs of people who say things like ' finally Apple made a waterproof iphone water" and other things. It's about the iphone 6, not 7. It is a hoax, or is it true? They say things like resistant to water up to 1 ft.

  Probably the hoax. Even if I have an iphone 6 I do not trust blog. but Apple, is it true or hoax?

  Probably hoax xD

  The 6s is not classified as resistant to water.

• Water resistant / headphone jack

  Hey,.

  Got my Z2 yesterday, and so far here it goes great. Not had the chance to test the video and even sound.

  Re the waterproof function water - I have no coverage on the headphone - should there be a?

  Thank you

  Its okay, there is none. Decision-making itself is waterproof to the water.

• water resistant

  How much I need to check my xperia z5? because I have to make sure it always supports water resistant.

  1.) make sure that the flaps/port covers are clean. the rubber seals may be compromised if there something stuck in it.
  2.) make sure that you close correctly. apply pressure to the four corners of the cover of port to ensure it does not break out again.

  (3.) to see if your device is damaged by water. You can check a white indicator located inside the port. If it turns red, it means the water inside the unit.

  4.) @quester cited, the device is not more to dive (unlike previous models of z), although they have the same IP certification.
  5.) be sure to dry your device completely before plugging anything. Is there an instruction book in retail for that box.

  6.) sometimes if the device has come into contact with water only warm while. moisture can develop inside the unit (especially in the lens of the camera) so make sure that the appliance is cold enough, before wash you. fog on the lens of the camera will go eventually.

• Designjet T790: Do not recognize paper roll

  I am trying to load a new roll of paper and all of a sudden my T790 does not recognize the paper roll and refuses to do anything when I slip the paper into the slot. Any suggestions?

  Hello

  It's really easy to replace the sensor on paper (OOPS).

  You can see under the printer.

  Here is a picture

  

  2 guess before replaing this sensor

  1 - Turn the printer orr, unplug the cable and plug it in again (follow the cable to the right and you will see a white plug), turn on the printer

  2 during the loading of the paper after paper triguer the paper sensor, keep inserting the paper until it reaches the drive roller. When you hear that beep is because the paper reached the OOPS, but not the drive roll, you keep feeding the paper.

  Best regards

  Mike G

• Page preset with paper roll size

  Hi, I use an Epson 7880 on a PC running Windows 7 64 bit with Photoshop CS5, Lightroom 3.4.1 and no. RIP.

  As I work currently, I install the paper roll. Next, I set a page size in the section defined by the user of the Control Panel printer driver. Now, I can organize my layout within this page and use Lightroom (my first printing interface) to optimize this provision. In other words, I put in a 24 "x 39' paper roll. Can I set a page size of 24 "x 33", and then I play in this page.

  This predefined page is the only way to use the roll paper in other words, can I put the paper and tell Lightroom I want 1-16 x 20, 3 - 8x10s, 10 5x7s, etc., have lightroom just use as well as the role that she has and cut the paper where he ends up printing? This should optimize the paper better than me before setting a page size and then lose some lightroom does not need. Once again, as an example, if I predefine 24 x 33 and print only 2 - 8x10s, I lose a lot of paper by using the predefined page.

  I hope this question makes sense.

  Help

  Mike

  Nope... not the way print drivers work... you need to specify a page size to print.

• IPhone water resistance 7

  IPhone 7 can go under water? or it can simply expose to something like the water spill or raining?

  Waterproof up to 50 m.

• Water-resistant case disturbing As50

  Hello. Ive already posted asking if its safe to use my AS50 underwater ("how tight is my AS50"), and I am very happy to take it on my first ever scuba diving (up to 12 meters). But ive tried just diving into a small fountain, as 10 cm deep and this happened:

  http://imgur.com/JhlBnyI

  When I sqeeze, a little water will extinguish. This scared me, is it supposed to be like that? Is the seal at the rear, or do my still new camera gone faulty?

  Thank you for that - it was really hard to see.

  The important part is the black part, it's where the target is at the door. The gap little where you see beeing trapped water in is not important to the case sealed beeing.

  If you do not always agree with the case, then simply fill it with tissue paper, a towel or a tissue and let stand in deep water.

  If the water, you will notice it immediately.

• Designjet T610: Designjet t610 ink level

  MY Hp Utility not keep track of ink for me more.  It says "not available".  He is not on a network and is connected via the USB port.  I really need this app to work!  I don't want to have to go to the printer every day to check levels.  I want to be notified when the ink level is low.  It happened when I recently got a new computer.  The tech store downloaded drivers current of the internet.   I hope someone can help. Thank you!

  You can continue on your new post

  http://h30434.www3.HP.com/T5/Designjet-large-format-printers-and-digital-press/T610-ink-level-utility/m-p/5571736/highlight/false#M9383

  Yes, I'm sure.

  I believe you than that used to work before, you try to get a computer with the OS sate you used to have to try and mimic the environment?

• waterproof function water after battery replacement

  I use xperia z2 of the last six months. My phone does not work well. But I need to know whether or not water proof feature will be retained after battery replacement. A comment on this topic.

  You replace the battery? If you do this in a sony service, they will keep the waterproof ability to water from the unit.

• Does anyone know of a water-resistant case for the 38mm Apple Watch?

  Hi, I hope someone can help me.  I like to wear my watch while swimming, so that I can continue to follow my activity.  Does anyone know of a waterproof box that fits the 38mm Apple Watch?  I know catalyst pleads for the size of 42mm and I have contact with them, but they don't have any current plans to release a smaller version.  If anyone knows another option, I'd appreciate it.  Thank you!!

  Hello

  I'm not aware of any case that claims to provide waterproofing for the 38 mm Apple Watch features.

• Designjet T610: Designjet T610 of ink

  I bought a T610 24 '' used tracer.  Downloaded the driver from HP.  Installation disc was not included.  Connected with the USB 2.  The printer is out of ink Cyan.  Waiting for a new arrival.  Have not printed anything yet, cause it does not print when I try.

  It's as if the printer is not related to my office.

  Is it because it's out of ink?  There is no message or error code, just cartridge is empty.

  Any help is appreciated.

  The printer does not print anything unless the full set of cartridges are installed. Once you get the new ink, it allows to print without any problems. Just make sure the driver is installed on your computer has USB port selected.

• Z3 = water resistant?

  Hello everyone

  My Xperia Z3 is now 1 month old. I washed today for the first time, and after 5 min, anything more. After 30 minutes, the phone vibrated for 5 min and then died completely.

  I closed all closures!

  And this is not the first time, with my old Xperia Z, I had the same problems. Incopetent tey it can't build a waterproof smartphone is Sony?

  Someone at - it the same problem?

  This is not normal. The device is IP68 and IP65 certified, which means more than waterproof 1 m and 30 minutes. You can leave a sony service check your device:

  http://www.sonymobile.com/global-en/support/contact-us/

• Problem of water resistance

  I just bought my Sony Xperia Z3 yesterday. When I bought it, I checked my phone under water, but after that day, when I took my phone under water again, it wasn't working properly, but after some timea my phone screen started blinking I turned off quickly my and cleaned properly. When I was cleaning I noticed lan yarf and camera shutter that the phone has been filed with the water. I cleaned it properly. When I turn on my phone, the screen was blank. There was nothing but black screen. But under the screen of my phone worked. I gave my phone to customer service.
  I want to know that why this problem occurred. Is it a manufacturing fault or something else?

  @Shuvocasanova

  Only your Local support can answer this question, after reviewing the device.

• Design Jet T610: Designjet T610 noise deaf when printing

  Recently, we had our belt changed and now there's a THUMP from the right side of the printer.  It was printing normally with the noise for several months.  WE do not often use it.  It has become a noise problem.  It's a thud coming clearly from the right side, but it is still printing is not the print head.

  Any ideas?

  I will private message you a link where to find the Service Manual - of the socket replacement procedure starts on page 6-137. the video is wrong in detail on the importance of this piece, but at least gives you an idea of what you would be facing.