Design Jet T610: Designjet T610 noise deaf when printing

Similar Questions

• 6110 all-in-one office Jet - Chronicle whirring, clicking noise. Cannot print.

  Error message: failed to scan; Turn off the power, then new.

  • Following a power failure, when our printer came back, she began to make a persistent hum, clicking noise after initialization. I followed the instructions in the error message to put under off, then on again. I did it several times, with the switch and power cord; but the problem persists.
  • When I lift the gateway of ink cartridge, the cartridges align perfectly and are secure in their compartments.
  • There is no jam.
  • When I try to print, a piece of paper is partially pulled up, then stops; the display will show "warm up", and then after it happening for a few minutes, I once more the message "failure of scan, stop the power, then on again."

  Thanks for your suggestion. I followed your instructions, but I'm right back where I started, so I think I just buy a new printer.

• HP Design Jet T920/T2500 Pages can be printed with the new HP 727 130 ml.

  Hi guys,.

  I want to ask you how many Pages can be printed in the new HP 727 130 Ml of INK CARTRIDGES. Normal, black and white printing on Hp Design Jet T920/T2500. One of my customers asking me this way, I'm looking for and read about the manual but this is not to mention the approximate number. pages can be printed. I appreciate who can help me and share their experience with this concern.

  He mentions on the manual which:

  Can be printed 120 Page A1 and A0 60 per hour, but HP 727 130 ml (returns/Pages)?

  Thank you and advance...

  I doubt that there is no information for this because inkjet printers work differently then laser where they use a percentage of coverage for compiles the approximate pages toner. With Designjet printers there are many variables outside coverage that would be very difficult calculations. You will be dealing with page sizes and even with normal printing or graphic images line densities will have much to different amounts of ink laid according to the original plot, type of paper used, etc.

• a cartridge 26 replace a cartridge 82 a design jet 510 does

  a cartridge 26 replace a cartridge 82 a design jet 510 does

  Hello

  Please check the packaging, the is a cof list compatible printers. In addition, depending on where you are, all I can see here is that they are not the same shape and size:

  26: http://www.cartridgesale.com.au/compatible-HP-26-51626aa-black-ink-cartridge-p-841.html#.UTT011eSmo8

  82: http://www.hottoner.com.au/82-Designjet-500-800-yellow-ink-62317.html

  Kind regards.

• faulty internal drive, make noise, even when empty

  My internal DVD drive is faulty and continues to make noise as if a disc is stuck in there. The noise stops when the computer goes into mode "Eve". It is an iMac 2007 and probably not worth the cost of a repair. Is it possible to stop the noise by turning off the player or eject it somehow from the hardware list. The computer works perfectly in all other aspects. I guess I could learn to live with the noise, but would rather not if someone out there has a solution. Thank you

  You can always buy an optical drive of the correct specification of several sellers &

  have one put in, or use an online guide to replace the component yourself.

  Identify the exact model of guidance to see what is involved in the restoration of the iMac.

  • iMac repair guide intel - iFixit:

  https://www.iFixit.com/device/iMac_Intel

  One of the online sellers whose inventory likely includes an optical replacement

  Reader SuperDrive equivalent for the iMac (intel) would be OWC macsales. They also have

  some DIY video guides to see how to make various repairs. Generally a little

  additional tools would be needed. While the iMac is open for the replacement of this

  part, is an opportunity for the battery of the clock to be replaced as well. Maybe even

  drive hard replace; hard disk rotation is probably rather worn.

  So, it could be a great DIY project, if you went into it knowingly, with the right parts,

  tools and patience. Lets have a second machine to check details

  the online repair process; guides and video to help.

  In any case...

  Good luck & happy computing!

• Example: office jet 4652: I'm getting an incompatibility when printing

  I get an incompatibility message when trying to print envelopes #10 with windows 7 AllPro address Manager software with HP 4652 office jet

  Hey @warbamn,

  I understand that you have some problems with printing envelopes from your Windows 7 PC to your Officejet 4652 e-all-in-one printer. I can help you with that, but I'll need some information first. Please let me know if you see the incompatibility error when printing envelopes from another program first. Once I know that I will be better able to help you.

• Photosmart 6520 clicking noise when printing

  When printing I hear a rattling noise, as if the gears are not mesh correctly when the carriage moves.

  Thanks for the info. The noise started just after I had replaced the cartridges, but it seems to have stopped now.

• printing for design jet 430 cable

  DESIGN JET 430 (BLACK, NO COLOR PRINTING) ALLOWS YOU TO PRINT WITH A PRINTER ADAPTER USB FROM THE PARALLEL CABLE?

  I SEE ON AMAZON DIFFERENT SOLUTIONS:

  (1) USB 2.0 - IEEE 25 POLES DB25 PARALLEL ADAPTER

  (2) USB 2.0 - PARALLEL IEEE 1284 36 LPT ADAPTER PIN DB36

  What is the current connecvity to the device & what operating system.  The current setup works well?

  The adapter cables may or may not work, you may need to take a risk if you think it is better to buy.

• I am trying to retrieve a serial number of the CS6 Adobe Design Standard product, that I bought, but when I fill the order fulfillment form in the 'Adobe Support Customer Portal', one of two things will happen. Either my proof of eligibility isn't uploa

  I am trying to retrieve a serial number of the CS6 Adobe Design Standard product, that I bought, but when I fill the order fulfillment form in the 'Adobe Support Customer Portal', one of two things will happen. Either my proof of eligibility will not be downloaded and then sometimes the 413 error indicating "header length too large." How to do this?

  remove the cookies from the adobe.com site or use another browser.

• Office jet pro 8600 how default to black ink only when printing from my ipad

  Is it possible to set an option to print the black ink only when printing from my Ipad 2?
  When I use the print icon the only option that shows is double page. I would like to be able to print in black only.
  I can set this option when you print from my pc...

  Hello

  AirPrint does not support black ink only printing, however the HP ePrint app allows it.

  Note that the option is available only for documents (for example Office, PDF, Web pages and emails files), but not for the Photo files.

  You can find the steps to obtain and use the application in the document below:

  http://support.HP.com/us-en/document/c01616126

• . Printer - printing of brilliant photos, coating melts when printing

  My laser printer samsung 3185, when printing photos in color using lazer color paper, glossy coating is melting (, printer is again 4 weeks old) impression is ok on plain paper.

  This is the wrong place to ask this question. This forum is for discussion, compliments, complaints or suggestions about the Microsoft Answers experience.

  In addition, it is not a Windows problem.  It's not even a printer problem.  It's a problem buying.

  All that being said...

  All laser printers use high heat to merge the particles of toner on paper.  This is how works a laser printer.  And that's why you should not use ordinary coated photo paper in a laser printer.  If you want to use the paper, you can buy paper that is specially designed for laser printers.  For example: http://www.shopping.hp.com/product/Q6608A?landing=supplies&category=paper&family_name=

• While idle and when printing, display screen becomes blue with 0xb900103d messages

  Printer is HP PSC 2355 (ink jet)

  Windows 7

  Moved Office HP laptop Toshshiba

  Problem: While idle and when printing, the screen turns blue with one or two 0xb900103d or 0x8823cd1e messages.  Restart the printer corrrects the problem, but he finds himself in anywhere from 2 to 12 pages.

  Thanks for your help!

  There is a document using address type codes 0 x in the PSC 2355. This document can be found here.

  If this error appears when printing and idling, then I would say that this is probably an internal hardware issue with this printer.

  I hope this helps.

• Line bottom of texts and borders are cut off when printing using HP Deskjet 2060 on Windows 7

  I kept getting a cut of text to the bottom line of the borders, notes and even pictures when printing using HP Deskjet 2060 K110a on Windows 7. I tried the solutions on the web and it does not work for me. Can someone help me with this problem please? I bought it just yesterday and I'm surprised with one such problem occurred, as it is always new. Thank you.

  It is usually only for a problem in Windows Vista, but it comes up in window 7 at any time.  The document below the link is designed to solve the problem in Windows Vista, but it should work on Windows 7 as well. Let me know what happens.

  http://support.HP.com/us-en/document/c01672454

• Problem: Shadow of light color on black background when printing

  Using InDesign CS3, PC.

  I have a book cover design that looks perfect on screen. There is a section with a black background and the letters of color above it. Also on top of this black background is a picture of a dinosaur (made in illustrator CS3). The image was placed in the InDesign file and has no color to the background. But when printed (Xerox Phaser), there is a colored shadow where the image superimposed on the black background section.

  There are also colored boxes on the other black background sections where shadows (35%) occur on black background.

  Could someone tell me what I am doing wrong? I've never dealt with 100% black in my drawings before and I have to do something wrong.

  Again, on the screen, you don't see none of these colored areas on the black top. It's only when I print as they appear.

  Thank you

  Cathy

  InDesignSecrets"Blog Archive" eliminating the YDB (yucky discolored box) Syndrome

• How to get Firefox to ignore the status of liaison visits when printing?

  How to get Firefox to ignore the status of liaison visits when printing?

  When I print something, visited links are a different color than unvisited links.
  Is there a way to make the color even when printing?
  (without changing the story, or how things look on the screen)

  If there isn't a way to do that, how about this by adding as a feature?

  One way to do would be to create style rules customized for the printed output that hardcode the link colors for all of the printed output. Firefox supports two ways to proceed: a file userContent.css that you create in the folder settings, and a custom stylesheet applied using the Stylish extension.

  However, 'one size fits all' could lead to unreadable results or ugly on some pages. If an add-on that can do adaptive way would be better. I do not know if someone has created a.

  For sites that do not require a login and that are not personalized, you could launch the page in a private window (right click on the link > open in a new private window or copy the URL and then Ctrl + Shift + p, then paste it in the address bar and enter). Because private windows have their own history, the print should not reflect the history of your regular windows.