DesignJet plotter: ink cartridges T610

Similar Questions

• How to obtain warranty support - ink cartridges for DesignJet z3200

  I have a HP DesignJet z3200 only two colors of ink (MK / LM) stopped printing.  The diagnostics say there are still a lot of ink in the cartridges and they are still under warranty, but when I try to get a warranty support via the Web site it does not get additional information (email or phone number).  Does anyone know how to obtain warranty support for ink cartridges?

  Thank you

  Support for your product number is 800-334-5144. I am also including a link to the support page Hp that list of e-mail and telephone contact information.

  HP support

• My off brand ink cartridges are not recognized by my HP L25500

  I bought this ink cartridge: [changed to rules of Participation]

  but my HP L25500 does not recognize. It is completely useless.

  I went on many ink cartridges HP brand, who has always work without a single problem.

  But now, when you try less expensive off-brand of ink, I can't have my HP L25500 to recognize the cartridges.

  They are branded as G & G.

  The cartridges look the same as the genuine HP cartridges, but they covered all the logo with their stickers.

  Is there something I can do to get my HP L25500 to recognize cartridges?

  The page you gave indicates that the products have a 90 day warranty, I suggest to contact the vendor for a replacement.  HP does not guarantee the quality of third party products.

  This forum focuses on the level of consumer products.  For the Designjet that you can have better results, post in the forum HP DesignJet here, this is where the DesignJet experts.

• HP OfficeJet 4650: Ink cartridges HP Instant

  Hello

  I recently bought this printer to take with me to the University. I've set up ink cartridges HP instant around September 16, for a while, I was unable to connect my printer to the internet, so I brought a home router. My laptop, printer and telephone are all connected to the same wi - fi and they will print stop no problem but when I go my instantaneous count of ink HP he always tells me that the printer is offline and cannot update to tell me how many page I used. I don't understand why it won't refresh and says that it is offline when it allows to print from my laptop and wireless phone. I wonder if you can give me advice.

  Thanks Grace

  At least two times a month should work.  Please mark my post as solution accepted while others can find it.

• HP ENVY 4500: Ink cartridges HP Instant

  I just bought a map of the HP Instank ink. I'm about to use the first black cartridge, but I still have another cartridge new color I need to use. I start support fully if I use only one cartridge?

  Hey @EMJ-00.

  Welcome to the Forums of HP Support!

  I understand that you have some questions about the instant the ink program. I can help you with that.

  When you print, the system determines if an instant ink page is printed according to it there a moment cartridge in the printer. If you insert the black cartridge, your only color pages into account. My suggestion is to insert two instant ink cartridges and save the color cartridge for emergencies.

  Please let me know if that solves your problems. If so, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Black ink cartridge will not print

  Putting in a new black ink cartridge the printer says it's there and full of new ink but when printing it don't use it. It happened the last time that I put in the black cartridge and I managed to do it finally work but don't remember what I did. Why is this happening?

  With printing black ink is not like that, there are only a few things you can try, and it looks like you did most of them. If the steps described in the following paper the link did not help, then you might make a physical print head cleaning. Bob_Headrick gave the steps to do this in the post below. If none of this does not work, you can either replace the printhead by contacting the support of HP, or you will need to replace the printer. If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.
  
  HP Technical Support call case form:
  http://goo.GL/w7Hgh
  
  Troubleshooting print quality problems:
  http://goo.GL/FHypA
  
  Physical cleaning print head:
  http://goo.GL/DfroJ

• Problem - has ink cartridge but no printing appears on the paper

  I have a printer of HP Deskjet 4200 all-in-one with a relatively new ink cartridge.  The printer prints white - nothing appears on my paper.  The last time I used the printer (with the same cartridges) was four months ago, and he was fine.  To my knowledge, nothing has changed (parameters, etc.).  I can't figure out how to get the printer to print anything.  I could go out and buy new cartridges, but ones I have is barely used, although only around the age of 6 months.  And the problem seems to be both color and black print (printer has two cartridges) - so I made me think that it would not be a cartridge problem.  Any suggestions on what I might try?  Thank you.

  It is possible that the print heads have become clogged due to sitting for so long unused.  Try to run the three cycles of cleaning of the Toolbox.  If it does not recover the printhead, then place 1 "of very hot water in a cup and watch the nozzles of cartridge in hot water for about five minutes.  When it comes gently dry the printhead on a wet cloth dry contacts of the cartridge, then reinstall the cartridges in the printer, and try another cleaning cycle.

• do I have to buy color ink cartridges? HP Officejet Pro 8600 more Windows XP

  HP Officejet Pro 8600 more

  Windows XP

  The printer will not print anything (including black and white which is my default setting), at least that I have installed a new yellow ink cartridge.  He says that the cartridge is exhausted and must be replaced before printing.    I have black and white printing color cartridges? Is there a solution? Thank you very much.

  DavidDavid salvation,

  Yes, you will need to replace the yellow cartridge to continue printing. Here's a good explanation of the design of the print mechanism, and what is needed to keep them in good working condition. Your printer is user replaceable print head. With this printer's ink lines that need to be filled in ink in this way that the print head should not be clogged jets in turn cause poor print quality problems.

  Written by Bob_Headrick on the wire note: http://h30434.www3.hp.com/t5/Other-Printing-Questions/Officejet-8500-won-t-print-Black-ink-only-if-other-colors-are/m-p/1706581#M67899

  HP, as other printer manufacturers, offers you with permanent print heads printers requiring ink for all colors, avoid the print heads.  HP, like some other manufacturers, also offers printers with user replaceable print heads.  These may of may not require ink in all colors in print, even though damage may occur if the print from the cartridge empty.  Finally, HP as some other manufacturers also offers printers with the printhead into the ink supply.  He is replaced at each change of cartridge.  These printers will happily print with a diet low, empty or many deleted completely same models.

  When you buy your next printer (from HP or from another manufacturer) be sure that you understand what is the type of printer and choose one that fits your needs.

• In the printer ink cartridge does not print in black on paper data

  The product name and number: e-all-in-one printer, HP Photosmart 5514 - B111h

  Operating system: Windows 7 64-bit

  Error message: no

  Changes made to your system until the problem occurred: no

  I went to copy the data on my printer and noticed the empty ink was passed out.  Changed the black print cartridge
  and now I can't print anything that has a black colour.  Replaced by a new black ink cartridge and

  Unable to copy or print everything about the color white.  Do you have all the guests on troubleshooting

  with no luck.

  Y at - it something else that can be done?  Would appreciate the help.

  Thank you

  Hello Alex,.

  You can try the following troubleshooting link:

  http://support.HP.com/us-en/document/c02914910

  In particular, solution 6 can be useful in your situation - print diagnostic print quality / check that the supplies are properly ventilated / print head cleaning.

  Hope this helps.

• My ink carriage does not move to the way to replace the ink cartridges. I think I put the ink in the wrong office

  My ink carriage does not move to the way to replace the ink cartridges. I think I put ink in bad officejet 3830

  Hello! Welcome to the community @Tammy111 HP

  I read your post about the ink carriage being stuck in your Officejet 3830, and I wanted to respond to troubleshoot. Try these steps and if the transport is not yet move to order so that you can access the ink, then your best bet would be to call phone support to see if they can replace the unit for you. I'll leave their details below.

  HP OfficeJet 3830, DeskJet 3830, 5730 printers - an error 'Transport Jam'

  Click on the thumb to below testify my help!

  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number appear

• 7520 new stuck in the installation phase. Print head move load ink cartridges

  I'm stuck in the new phase of printer configuration. After running through the commissioning of questions and I opened the cover to charge the ink cartridges and the print head did not move. I ran across several reset process... Unplug the printer. Wait 60 seconds and plug it in again. Browse the configuration... Unplug the printer... more.

  This printer does not seem to be any cartriages.

  Hey JohnTT,

  Sometimes, these printers come with packaging that holds the printhead completely to the right at the gas station.  This avoids damage to the product during shipping.  You see all plastic parts orange that it may contain in place or Blue Ribbon?

  So, have you tried the carriage to the right hand?  Can it be moved or is it blocked?

  If the printer still will not release the print carriage after the power cycles and move it by hand, then I suggest you return the product and return to the retailer of purchase or by calling the HP Technical Support to see about a replacement.  The phone number for the USA / Canada residents is 1-800-474-6836.  If you are not in this region, click here.

  I hope this helps.

• HP Photosmart Plus B209A does not print black ink despite trying two separate NEW ink cartridges black

  HP Photosmart B209A more

  MAC

  No error messages but trying to align or check colors - black doesn't print at all

  No change - knew ink was low so I tried to install a new black ink cartridge - then one day later tried an another new black ink cartridge

  I tried all the techniques of "Troubleshooting" listed on the page Web - align, clean the print heads, install the new cartridges, looking for trouble with the vents, etc.  I have only used HP ink cartridges.

  Hi abruce,.

  Usually, it is a result of dried/clogged ink nozzles in the printer or the print head.

  According to some other users on the forums, you can remove the print head (use this guide if you are unsure how: http://support.hp.com/us-en/document/c01944580)

  Make sure the cartridges are removed from the print head

  Dive head in hot water, nozzles downwards. (about 1 in. of water) and leave any residue of ink to flow. This process should take about 15 minutes. Ensure that the print head is completely dried out and there is no moisture in the electrical contacts or the rest of the part.

  I hope this helps!

• HP Photosmart more B210A: black ink cartridge will not print.

  The black ink will print on my printer.  I installed new ink and cleaned the print heads.  I did a review of the printer and the ink of color appeared only.  The printer is recognizing the cartridge when I check the ink levels.  The first page after cleaning came out very faint then anything.  At first, I thought that the new black ink cartridge was defective.  So I replaced it with another new - no difference.

  The only change is that I have installed all new cartridges when all printing has become very low.

  Help, please.  Thank you.

  Fushing did not work, however, we used a demo on Utube and has not used the distlled water.  That could be the problem. The printer is about 8 years old, we decided to get a new one.  Thank you very much for your help.

• HP Designjet Z6200: HP Designjet Z6200 Maintenance cartridge

  Almost complete - CH664A

  HP Designjet Z6200 maintenance cartridge

  Above is the HP part number why can I not find it and order this cartiridge maintence?

  Please someone form HP please give me a link.

  I would buy now before the end of the year.

  Thank you

  Hello

  http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=4228306#! tab = compatible_hosts

  This link indicates it takes to find a dealer. Click on it and use the tool to search for a dealer in your region

  I searched "Maintenance cartridge HP 771 DesignJet" on google and found a few sellers, try and look for your best option

  or

  The HP Small & Medium Business Store

  Here is the link with the phone number, loo at the top of the http://h71016.www7.hp.com/dstore/html/sa.asp page

• computer still displays the empty ink cartridges

  Every time I print, this dialog box appears. (I replaced the cartridges)

  

  It happened for a while now.  I continue to click Black only and it prints, as everthing I was need to print is strictly black.  However, now I am trying to print photos and I need color. I need to erase this message... but have no idea how.  The computer shows the levels correct as being complete... but still, I get this message ink and only on this computer.  On the macbook, it is not pop up and prints fine.

  Someone knows how to fix this?

  I have a HP all in one Photosmart C7280 running on Windows 7.

  Thank you.

  Hi gvchick03,

  Welcome to the Forums of HP Support! I see you amirouche get a print in black ink only error or to replace the Cyan and Magenta cartridges, but the ink cartridges are filled according to the ink levels. Have you ever set printing preferences to use black ink only or print in grayscale? Even if you select only one scale or gray black it still requires all the colors and all ink cartridges pull.

  Please take a look here and make sure that the preference is not affected in black ink only or grayscale. Refer to step 1:

  Impressions of color in black and white images

  Now, I would like that you remove all the cartridges and do a hard reset on your HP Photosmart C7280, see here: reset of the printer

  Once the printer is full initialized, please replace each cartridge one by one. Now, check the ink levels are they accuse even more complete? Try printing a test page, you still see the error message come?

  Now go ahead and run HP print and Scan Doctor- it has been designed to provide users with HP and features troubleshooting fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Let me know the results, I can't wait to hear from you.

  Thank you