DeskJet 3050 has J611: printer interrupts the headers and footers

Similar Questions

• HP Deskjet 3050 has J611 printer without a driver.

  What happens to my driver for my printer HP 3050 has J611 it saids no driver?

  [Moved from comments]

  Hello

  Uninstall and reinstall your printer by using the drivers and information on the HP website.

  Equip your model number of the printer for this information and troubleshooting for her.

  http://WWW8.HP.com/us/en/support-drivers.html

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• DeskJet 3050 has J611 printing project

  So I have a 3050 a J611.  I want to adjust the print quality settings and it won't let me.  I'vegot best, Normal, project and custom, but only Normal and custom are selectable.  I want to be able to select one of them, why can't I?

  I was looking just at things once again, and it's sort of silly system.  Quality is selectable in the tray press selection section.  I think they have just forgot to remove the redundant part for quality selection.   v

• DeskJet 3050 has J611 printer, windows 7 64, sony vaio F series with router netgear seem incompatible

  I was able to connect successfully the printer to my computer sony vaio notebook, as much as I first disconnect internet router, after that the installation I can connect internet once again, then it works for a few hours. However, when I turn off and restart the computer, the computer does not find the printer. Meanwhile, the printer is connected and has the correct network and are accessible from my Ipad or eprint, but not of my sony vaio. I tried all the solutions proposed in the various forums without success. Can anyone help? I also checked that my computer is on the same network. The printer appears "shadow" under devices and printers. Thanks in advance.

  What router are you using?

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.

  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for the second.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Incorrect impression of the characters in the headers and footers

  Recently, the headers and footers in Firefox started the incorrect impression, with the characters sometimes crushed together, sometimes with long spaces between them. This happens on both of my PC, when you print to a printer or pdf and appears in the preview before printing and print. Any idea what went wrong?

  It is a known issue in Firefox 4 beta 12. You can expect ' the RC comes out, or you might catch one of the latest compilations nocturnes availible here that solve this problem: ftp://ftp.mozilla.org/pub/firefox/nightly/latest-mozilla-central/ take the version that is compatible with your system.
  Direct links:
  (Windows)

  32-bit: ftp://ftp.mozilla.org/pub/firefox/nightly/latest-mozilla-central/firefox-4.0b13pre.en-US.win32.installer.exe

  64-bit: ftp://ftp.mozilla.org/pub/firefox/nightly/latest-mozilla-central/firefox-4.0b13pre.en-US.win64-x86_64.installer.exe

  P.S. Nocturnal compilations may be unstable. I would recommend waiting for the CR.

• Adobe Muse play up with the headers and footers

  My Adobe seems to play up. I have set up the headers and footers on the muse and then since I updated to this new version of response - on the homepage web - header moves on one side and when I go to other pages header moves to the other side. Goes the same for the slider I - when its on my macbook pro, it's fine, but when I move to a bigger mac or on a computer it all goes funny and appears as the image resizes in response to the size of the screen. Also my objects on the screen just light up either so big or smaller on different pages. I'm not really happy and this must be given Monday.,.

  I have problems with my fonts in the headers and footers, if it is the catalyst for the company, the elasticity this a go... it solved my problem

  Last update March 1, 2016 Masterpage display correctly on Businesscatalyst

• Ftting the headers and footers to a pdf page

  Hi all, I would like to add headers and footers to pdf pages, but the problem is the content spans page anywhere in the page because of which headers will no longer write the content of the pdf page. Is it possible to compress the contents of the page so that I can ride in the headers and footers correctly?

  Acrobat Pro, you can increase the size of the page with the crop tool.

• DeskJet 3050 has J611 all-in-one: Mac cannot connect to the printer using the wireless configuration

  My printer is connected to the same network as my Mac. When you complete the Setup wireless using a USB in system (HP Utility) preferences, a message says: "wireless network settings have been successfully downloaded to your device. However your Mac could not locate the device on the network. »

  I did everything I could: restart the printer. Unplug the printer and reconnected on the network and configuration of try again several times.

  Help?

  Hey @benjaminllim,

  Welcome to the Forums of HP Support!

  I understand that you have some problems with the connection of your Deskjet 3050 has e-all-in-one printer to your computer Mac OSX 10.11. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

  1. Turn the printer off:
  2. While the printer is turned off, disconnect the power cable from the back of the router for a minute.
  3. When the lights come back on the router, turn on the printer.
  4. Disable any antivirus, firewall or security of your Mac software.
  5. Try to run the installer.

  Please let me know the results after following the above. If you are able to print to the printer, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet 3050 has J611 CN1684C location on ipad for the readmission of the wireless printer code

  do not understand the request

  Hello armeson,

  You must go to www.eprintcenter.com and set up a user account. Once you have an ePrintCenter account you can add your printer to the account with the code for the printer that you were on the list in the subject line... After you have entered the code, you will be prompted to name your printer and this name will be part of the e-mail address of your printer.

  BTW, I got the code printer removed from the subject line of this thread to protect your privacy.

• HP Deskjet 3050 has J611 series watch in trouble with wireless printing

  Hey there,

  I have just a series of combat a HP Deskjet 3050 printer a J611 and wireless printing to work perfectly. However, for the last week or so is no more.

  The printer is connected to the network, as the result of the wireless network test is proven and it is the same network that the laptop is connected to. I have already uninstalled and reinstalled the software. The wireless light is on and I can see the signal strength and the IP address. However, it still works.

  I also I sent an email to the printer to see if it worked. Initially, I received an automated email saying my printer is not connected to the internet and then printing will be delayed. I didn't touch the printer after that, but about 6 hours later it started to print.
  I also tried to connect the printer with a USB key and configure settings wireless via USB does not work either. The computer cannot find a printer connected to the network. There is no firewall blocking the application or the printer.

  My settings:

  Router broadband wireless ADSL2 + -.
  Huawei EchoLife HG521
  TalkTalk
  Laptop - Medion Akoya E7214
  32-bit operating system
  Windows 7 Home Premium

  Help with this would be much appreciated! Thank you!

  Larissa

  I doubt disturbed the other printer.  Kaspersky can be a problem, but we're going to explore other things first.

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• DeskJet 3050 has: updated printer driver for Windows 10

  I can't update my driver for Windows 10 (don't know if its 32 or 64 bit).  HP support to download drivers updated seems unable to detect my printer even if bluetooth is turned on for both. Any thoughts?

  Hello

  First your printer doesn't have Bluetooth? How do you connect your printer now? Please download the software and the following driver and install on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL37193/al-109013-3/DJ3050A_J611_1315-1.exe

  (Select Wireless when install.) Yet once it doesn't have Bluetooth).

  Kind regards.

• How can I remove all or part of the information in the headers and footers? For example, date and time of printing.

  I can't find where I can remove the print the date and time of printing or if I want a header or footer at all.

  If you use the traditional menus, on the file menu, select Page layout

  If using the orange Firefox button, click it and then select print and then Page Setup

  Once the dialog Setup page, click on the tab "margins & header/footer". You need to change all the options in the header and footer "- empty -"

• How to disable the headers and footers of first fage

  Another question for experts! How do you keep the headers, footers and page numbers on the first page of each chapter?

  It is Ctrl + Shift + click with the selection tool to substitute. Bob has type faster than his brain this afternoon.

• HP deskjet 3050 has J611 series and Mac Osx 10.7.1

  I am trying to install the printer hp desk jet 3050 a (series j611) and I have the mac os x 10.7. 1 operating system and it does not install. Can you help me?

  No, this is not true.  This printer is compatible to the current OS X 10.8.  Your CD may not be compatible, but...

  Download and install the latest version of the software for your printer from Driver link request at the top of this page

• HP DESKJET 3050 HAS J611 PROBS JPG SCAN

  Why this device scan all my documents in a JPG format and not a Word Doc or plain text?  Also is this device of rock?

  DOC7777 wrote: why this device scan all my documents in a JPG format and not a Word Doc or plain text?  Also is this device of rock?

  Hello DOC7777, I think that the default format for your printer is in jpg format. You can download and install the latest version of the software for your printer, if you have not already.

  There may be an option to save the scanned in a different format. Most of the scanned jpg images can be inserted into a Word document.

  Here is the link for the package full feature software/driver for your printer.