DeskJet 3050 reports falsely "open tray".

Similar Questions

• New Deskjet 3050 J611 has no scan on iMac OS x 10.6.8 + utility HP do not open

  Hello - until I posted this I spend some time looking around and follows that some advice given here. It did not solve my problem. I bought a new Deskjet 3050 a yesterday.  Installation and wireless, the installation program has worked well.  I can print.  I can't scan - not with my iMac scan programs, nor with the HP scanning program.  I used the latest drivers I think. I first installed from the CD and then downloaded the drivers iMac OS X 10.6 from this site and re-installed.  I restarted iMac. Printer power switch.  I can't even scan.  Scanner programs don't seem to be able to establish a connection with the printer.  When I press on the analysis on the printer menu screen I get a msg saying there is no connected computer.

  More I can not open the HP program utility - "certain elements are missing," said the error message (even afetr two ire - install).

  All tips & tricks to fix this I would be grateful.  Thank you in advance.

  Joel

  Hello

  In reading your comments, you did not updated the latest driver by Apple Software Update, it could strongly affect the digitization of the Mac:

  Click the Apple icon, and then click software update.

  Make sure to install any update HP available, then check any change during the scan or at the launch of the HP utility.

  If the same question is not change, follow the steps below to completely remove and reinstall the software.

  Step 1: Uninstall the HP software by using the functionality of the scrubber:

  * Please note that the following steps will delete all HP software installed.
  
  1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
  2. Select Applications
  3 select the Hewlett-Packard folder
  4. double-click on uninstall HP application
  5 follow the uninstall to prompt to select a device to uninstall
  6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
  7 approve any prompt to uninstall all HP software.

  Second step: reset the printing system:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.
  
  Click on the Apple menu and then click on System Preferences.
  Select print & fax.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Step 3: Repair disk permissions:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.

  Step 4: reinstall the latest version of the software below:

  http://FTP.HP.com/pub/softlib/software12/COL37730/Al-93167-1/DeskJet-3050A-J611-series_v12.7.0.dmg

  Step 5: install the latest update of HP:

  Click the Apple icon, and then click software update.

  Make sure to install any update HP available

  Please let me know of any changes,

  Shlomi

• I can not open HP Deskjet 3050 a scanning software

  I have a HP Deskjet 3050 has. It has a software build-in for analysis. It is very useful, but I can't open it now. I don't know why. I also have an error message shows "cannot find module HPstatusBL.dll, RunDllEntry"(something like that) when I start my lap - top. "." Could someone help me?

  I reinstall the whole software of HP Deskjet 3050 has and the problem is solved.

• DeskJet 3050 all-in-in-one J610a: Deskjet 3050 J610a cannot install scanner

  1. I tried to install the printer software for the Deskjet 3050 all-in-in-one J610a on a Dell E6530 with Microsoft Windows 7 Professional computer.

  2. but everything he tried guard fails with the message "installation Failed - the software for your printer cannot be installed."

  3. When you click on the ' details button it shows
  "Setup error. Install the Windows service could not be accessed. This can occur if you are running Windows in safe mode or if Windows install is not properly installed. Contact your support team.

  4. you will then have a solution. He then puts a document "default installation HP - 1601 MSI' on your desktop."
  a. He then opened Windows services to check if the Windows service install is running? Yes it's on my system.
  If I reinstall the same mistakes, as shown in the 2. and 3.

  5. I tried to replace the Windows Installer by running the commands ' msiexec.exe / uninstall ' and "msiexec.exe/regserver" (also tried in safe mode) for both 32-bit and 64-bit versions. Then by restarting. But making the same mistakes as in 2. and 3.

  6. I tried the installation CD and the last Installer downloaded DJ3050_J610_1315 - 1.exe from the Hewlett-Packard Web site. But making the same mistakes as in 2. and 3.

  7. I tried to run Microsoft Fix - it version 50809 who had another option to try. If you run it, it says 'creation creating a restore point, please wait... '. ». After a wait, he says "this Microsoft Fix - it impossible to deal with".

  I tried another more recent version of Microsoft Fix - it (downloaded from the Internet):
  MicrosoftFixit.ProgramInstallUninstall.Run.exe
  Running to check installation problems showed a list of programs to check installation problems.
  But it did not show the installation of HP DJ3050_J610_1315 - 1.exe file or similar in the list it could
  not be fixed.
  If you choose "not listed" then it shows "we have not identified any problems and that's why no fixes have been applied.

  8. If I run the files D3050x64.msi and D3050x32.msi from the CD (using Microsoft Windows install) it also fails with the error, as in 2. and 3.

  9. If I install ' HPSupportSolutionsFramework - 12.3.11.29.exe' it installs, but does nothing. It's probably not running and no instructions on how to do work.
  Update: it is actually a service running in the Microsoft Windows services such as 'HPSupportSolutionsFrameworkService '.
  The executable file is located in C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\HPSupportSolutionsFrameworkService.exe
  This service runs, but does not seem to be enabled.
  It adds a controller service background that adjusts automatically to
  run. Delay the start of this service is possible thanks to the function
  Manager. A scheduled task is added to the Windows Task Scheduler in order
  to start the program at various times demand (variable hours of work
  Depending on the version). The software is designed to connect to the
  Internet and adds exceptions to Windows Firewall to do this
  undisturbed.
  Scheduled task
  hpsupportsolutionsframeworkservice.exe is intended as a task with the class '{98FA553D-D703-4E16-9884-F328AC21770F}' (works on registration).
  Service
  hpsupportsolutionsframeworkservice.exe runs as a service named "HP Support Solutions Framework Service" (HPSupportSolutionsFrameworkService) "this service allows the detection of HP products and allows the identification of support solutions for detected products.".
  Boot file (user run once)
  hpdia.exe is loaded only once in the registry of user (HKCU) current as a name of boot file "HP download and install wizard" that charge as "C:\Program Files (x 86) \Hewlett-Packard\HP Support Solutions\Modules\HPDIA.exe" / reboot.
  Windows Firewall enabled program
  hpdevicedetection3.exe is added as a firewall exception for "C:\Program Files (x 86) \Hewlett-Packard\HP.
  Check "Windows Task Manager" for example by running the command line
  Schtasks.exe
  or to run GUI
  Start taskschd.msc
  did not show anything about this service I can say.

  10. by using a troubleshooting earlier, I managed to install * only the printer *. But the * scan * can not be installed.

  See:
  https://community.Spiceworks.com/topic/443342-Windows-7-PC-keeps-trying-to-install-WSD-print-device?...

  1 - run
  rundll32 printui.dll/s/T2
  (this from the cmd.exe command line)
  2 - I couldn't find the 3050 in the list of default constructors (for example, "HP")
  3. - click on the button ' Add... »
  4 - click on the button "next".
  5 - automatically activated for example is 'x 64' '.
  6 - click the button "next".
  7 - click on the 'Have Disk' button... »
  8 - fill the printer Hewlett-Packard CD-ROM drive letter that
  should be in your computer
  For example
  D:
  9 - who will install the printer driver 3050 J610 and display it in the list
  10. - click on the 'Start' button of Microsoft Windows
  11. - Select from the list of "devices and printers".
  12 - if the printer 3050 J610 appears, right-click on it and select
  "Troubleshoot", if not right click, "Add a printer", make sure that
  your printer is on, and then select the printer 3050 and let
  It installs.
  13 - run the first fix to get the printer driver
  14 - run the second fix to make the printer the default printer
  15. - successful on Microsoft Windows 7 Professional execution

  (11 for example if I run the program "HP print and scan doctor program" to troubelshoot (= HPPSdr.exe) it is said that the ' HP445411 (HP Deskjet 3050 J610 series - network 192.168.1.49) - installed). It is said that the full product is not installed, then begins to download. But the executable that it downloads the same DJ3050_610_1315 - 1.exe as downloaded on HP website. So to make the same mistakes as in 2. and 3.

  12 Note: I basically never have no problem with installation on this computer. Only this printer HP 3050 J610a software does not always install.

  13 - tried to run pnutil.exe

  Because I managed to install the * printer driver (but not the * scanner driver) using the command
  rundll32 printui.dll/s/T2
  I was looking for a similar solution method for the scanner.
  So tried for example
  RUNDLL32. EXE, SETUPAPI. DLL, InstallHinfSection DefaultInstall 132 HPScanMiniDrv_DJ3050_J610. INF
  but which failed with the error "failed to install".
  Also tried to navigate this HPScanMiniDrv_DJ3050_J610 file in Windows Explorer. INF
  then right click on the file name and select 'install' in the list, but that showed a dialog box
  "Install error - the INF file selected does not support this method of installation".
  Then I found this link:
  https://social.msdn.Microsoft.com/forums/Windowsdesktop/en-us/60f4b917-93c9-400A-B91A-15375a8793bf/i...
  who suggested using the Microsoft «pnputil.exe» program
  After inserting the installation CD original HP located in D:
  and it points to the file ' HPScanMiniDrv_DJ3050_J610. INF'
  which is present by default on this HP CD,
  and by running this command:
  --- cut here: begin --------------------------------------------------
  d:\ Tuesday, May 30, 16 16:32:33 > pnputil
  Microsoft PnP utility
  Use:
  ------
  PnPUtil.exe [f |-i] [-? |-| d |-e]
  Examples:
  PnPUtil.exe - an a:\usbcam\USBCAM. INF-> Add package specified by INF USBCAM.INF.
  PnPUtil.exe - a:\drivers\*.inf-> c add all packages in c:\drivers\
  PnPUtil.exe-i - one a:\usbcam\USBCAM. INF-> Add and install the driver package
  PnPUtil.exe EI-> list all packages 3rd party
  PnPUtil.exe d oem0.inf-> delete package oem0.inf
  PnPUtil.exe f d oem0.inf-> Force delete package oem0.inf
  PnPUtil.exe -? -> This form to use

  So I ran this command:

  d:\ Tuesday, May 30, 16 16:33:39 > pnputil-i - one HPScanMiniDrv_DJ3050_J610. INF
  Microsoft PnP utility
  Processing inf: HPScanMiniDrv_DJ3050_J610. INF
  The driver installed on a device on the system.
  Successfully added driver package.
  Published name: oem115.inf
  Total attempted: 1
  Number was imported successfully: 1
  --- cut here: end ----------------------------------------------------

  The disk check showed the file "oem115.inf" was indeed installed in the directory "c:\windows\inf\".

  During troubleshooting earlier, I already copied the file
  HPScanMiniDrv_DJ3050_J610.dll
  Located on the HP installation CD
  in the folder
  c:\Windows\System32\
  and also to
  C:\Windows\SysWOW64\

  I then run the steps here:
  http://Windows.Microsoft.com/en-us/Windows/working-with-Scanner-Camera-Installation-Wizard#1TC=Windo...
  Before using the wizard, connect your scanner or camera and turn it on.
  If Windows detects the device and installs the correct driver, you're all set. There is no need to run the wizard.
  To start the scanner and Camera Installation Wizard
  Open the wizard scanners and cameras by clicking on the
  Start button, then click Control Panel.
  In the search box, type scanners and cameras and then click Scanners and cameras.
  Leave administrator needed if you are prompted for an administrator password or a confirmation,
  type the password or provide confirmation.
  I can't find that on Microsoft Windows 7, but clicked on the button 'add a device '.
  This shows the scanners currently present on the system.
  If it is present, double-click it.
  Microsoft Windows will be found the driver for you.

  But he could not find a scanner or install the scanner driver.
  So not solved.

  14 - Note: If a successful installation: for example, you should be able to see the
  device scanner in 'Start' > 'Control panel' > 'System' > ' Imaging
  devices

  15 - I then tried to run Windows fax and scan program
  (you need to install first)
  WFS.exe
  But not find scanner.

  16 - I then connected the printer with a USB cable to the computer.
  He began the installation of the driver and reported a successful installation
  and analysis successfully.
  I guess that somewhere in the previous steps, that the pilots were in the right
  place.
  But it works with my attached USB cable.
  If I try to remove the USB cable it says
  "Cannot find the scanner." No scanner or other source TWAIN found on the system'

  17. I also tried to run the Installation Wizard of HP printer
  http://support.HP.com/in-en/document/c03521864
  but that no longer works.
  It has detected now:

  "HP Deskjet 3050 J 610 series" - network
  But for the network one he noted a problem:
  "The wizard has reported a problem with the software driver for the selected printer."

  "HP Deskjet 3050 J 610 series" - USB
  For this version of the USB what he reported:
  "Basic features drivers seem to be installed for the selected printer." We recommend you to install the complete HP software to get all the features of the printer"

  If you click 'next' again it downloads the usual HP software that you
  can not install. With the same mistakes as in step 2. and 3. here.
  So no solution.

  18 - of the current workarounds:

  a. - possibly try some of the steps above which may take for example, the printer and scanner driver to the right place.
  Then connect a USB, Microsoft Windows should detect the printer / scanner
  and install the drivers.

  But printing should work wireless.

  Disadvantage:

  To analyze you will need to connect using a USB cable and the scanning doesn't work so not wireless.

  b. - buy or use Hamrick VueScan. It installs its own drivers to scan.
  But it is not free software. But it works by scanning wireless also.

  Question: If you have the best solution or workaround solutions, for example to activate
  scan wireless too, please let me know.

  Hello @knudvaneeden,

  It is a great place to get help! I read your post and see that you receive an error when trying to install the software to print, but you have finally managed to install the printer by a USB connection. When you use the printer as a wireless connection, you are not able to scan. Please provide all the detailed steps that you have already tried. I want to help you solve this problem.

  Make sure that you disable the Antivirus software and scan in real time if your software Antivirus has this feature. It can affect the entire software installer.

  Follow this document to see if you can install all drivers: HP monofunctional and printers multifunctional - installing software Fatal Error "fatal error 1601' (MSI error 1601) displays for HP. »

  Try the scan of the painting to see if you have the same problem.

  Run the Print and the doctor Scan and let me know the error codes or if everything is checked. You can attach a screenshot.

  Scanning ports is not open on the router to the origin of this problem. You can contact the router company to verify and to open these ports 9220/9500/427 on the router.

  You can click the 'Thumbs Up' to thank me for my efforts! If this helps you resolve the problem you are experiencing, please click the "accept as Solution. Keep me posted. Good luck!

• Drivers HP DeskJet 3050

  Dear HP,

  Today, I bought a HP DeskJet 3050 all-in-one printer. Configuration and installation is extremely easy and went smoothly (including getting it connected to my wireless network). However, when you go into Printer preferences I have barely any options. Rather, I assumed that all HP printers come with a driver who had advanced options like eco/project, double-sided and booklet printing. Is there a way to get the options available in the preferences of the printer or the printer has only a very basic driver available?

  Kind regards

  Marijn.

  Hello

  sunmar83 wrote:

  I just did a clean install on my laptop of girlfriends (Vista 32-bit) and it has the same limited options. I think it's just the driver that is only a single driver of base. Apparently HP does not provide features pilot advanced for its low end budget printers. Seems a bit odd for me as I assume that the software should not depend on the printer driver (only from specific features like duplexing perhaps).

  HP Deskjet 3050 doesn't support automatic duplex two, however, it supports two-sided manually. Here's how it's done:

  (1) open the application, click File ==> Print

  (2) select printer icon ==> properties-click ==> click the Advance button

  3) click on 'Pages to print' in the menu drop down select "Print even pages" and click OK. This example displays the pages even first.

  (4) now turn the pages and insert page in the paper tray

  (5) in the application, click File ==> Print ==> printer icon select ==> Properties ==> Advance button

  (6) this time select 'Print the odd pages' in the menu for "Pages to print", and then click OK to print the odd pages.

  In the Advanced tab you can see other options like "Print in Gray Scale ' etc. To print in "Draft" mode, click the Layout tab. In the last drop-down menu, you will find options such as 'Fast draft mode', 'Normal', 'best' etc.

  It is a redesigned s/w and more options can be added with future updates or new versions of s/w

• Series Deskjet 3050: test printing sheet but only blank sheets come out otherwise, also can not copy to printer.

  Has made no recent changes outside the update for Windws 10.

  OK, thanks for that.

  Here is the link for the drivers and software for your printer page: http://support.hp.com/us-en/drivers/selfservice/hp-deskjet-3050-all-in-one-printer-series-j610/4066450/model/4066451#Z7_3054ICK0K8UDA0AQC11TA930C7

  If that doesn't show Windows 10 when you open it, and then click change and select Windows 10 in the menu drop-down.

  The drivers, you need to download are full feature software and drivers.

  Remove all the existing drivers and the software of the printer.

  Install the new software of HP but have the printer unplugged and it do not connect until the installation program invited to do so.

  After the installation is done and you reboot, you should be able to use your printer without problem.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• HPJ610a Deskjet 3050: Join the network wifi through router new Deskjet 3050 HPJ610a

  I moved into an area of network connected to fiber (NBN Australia) and installed a new router D-Link DIR - 850L.  I was unable to connect to the router using WPS.  I had to buy a HP Envy, which connected wtihout difficulty.  I just upgraded my router to a TP - Link Archer C9, with a richer control interface, so I tried again to connect my Deskjet 3050.  Once again, no luck.

  I read a number of posts about this, and they all back down to the re-use of your installation of the printer software.  The problem is that the software driver for OS X El Capitan comes from Apple and is already up-to-date. I am able to run the printer when it is connected by a USB cable, so if I could work out how to emulate an installation, I might be able to get connected.  Is it possible to do this?

  Hello

  Sorry for jumping in, but the steps in Mac OS X are in fact incorrect.

  In System Preferences, select Printers and scanners.

  Double-click the listed USB printer, and then select the printer settings / Options.

  Open the Utilitiy tab, and then click Open Utility.

  In the screen, select Convert to wireless and follow the on-screen instructions to connect the pritner to your wireless network.

  Note: If no option appears, click the top phone menu and select Connect a new printer, and then follow the steps by choosing a wireless connection.

  Kind regards

  Shlomi

• HP deskjet 3050 a cannot connect

  has printers HP deskjet 3050.

  Can't connect wirelessly to... tried all the hp helps but still not working when I enter the ip address in the configuration of the printer

  print report say nothing but good things. Firewall disconnected... gunna lob it out of the window very soon...

  Someone at - it ideas

  See you soon

  Shaun

  Hi shaunuk,

  Follow the instructions in the document below.

  http://support.HP.com/us-en/document/c02722113

• HP deskjet 3050 j610a: hp deskjet 3050 j610a

  I have a hp laptop flow and a hp deskjet 3050 j610 while a printer/scanner/copier. It was working fine, I have it set to work wireless. I can print wireless without problem, but all of a sudden when I scan a document it appears on my laptop as a page with nothing but the black lines. You cannot say that there is a document at all. When you try to make a copy, it does the same thing, it prints nothing else than to the thick black lines.

  I already followed the instructions on the hp Web site. I tried unplugging everything and reconnect it when it is 'static', nothing helps.

  I cleaned the glass and scanner cover that has absolutely nothing.

  I used the printer doctor thing they ask you to download and it conducted tests on everything. It is said there is nothing wrong with it, when I do the scan test it always shows me a document of the black line.

  I tried to uninstall the software and printer and did a fresh install, it still does the same thing. I tried to wipe my laptop to the factory settings and resinstalling a new copy of the software of the printer, nothing happens.

  I entered the function within the software, I downloaded from hp and performed maintenance tasks. clean the cartridges, aligned the cartridges and a printed report but it is written an essay on the glass of the scanner has not been made.

  He told me to put a blank page on the screen and press black copy and it prints the same black lines.

  It was not dropped or damaged. It is in the same place all day, every day. NEVER, it moves its location. I clean the area regularly, so there is rarely any dust or debris on or around him.

  nothing has worked. I tried to look it up if he was still guaranteed, I knew I didn't... but I wanted to see if there is an option if I could send it even if they charged me to fix it, but the only option I found was to come here on this forum.

  someone please tell me that they have had the same problem and they know how to solve this problem, im at the end of the line of patience and I can't move forward more. any help would be greatly appreciated. just don't tell me to go buy a new one, I love it and want to do what I can to address them.

  Please please help? someone... anyone... Thanks in advance.

  Hi there @jessicaortiz39,

  That the Forums are with you!  It's a good place to find the help you need, other users, HP experts and other support staff.  I understand that you are looking to learn how to get a repair done on your printer. I'm happy to help you with this.

  Please see the following: Printers HP-HP Support Options, which give some details about the support available both in and out of warranty.  You will use the link under technical assistance, contact the helpline, but read the section to the right on "Pay by assistance telephone question" when out of warranty. Of course as indicated that fees are removed once the repair is implemented.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• DeskJet 3050 a: hp deskjet 3050 has not not red print

  I recently replaced both my cartridges on my Deskjet 3050 has. He had already printed perfectly for the past 2 years.  I checked that they are correct cartridges of real HP purchased from HP.

  I'm on Macbook Pro with OS X Yosemite 10.10.5 version and wireless connection.

  Please can anyone help because it's so frustrating?

  Thanks in advance.

  Martin

  Hi Martin,

  Try to print a self-test report by selecting settings > reports > Self Test.

  You see the magenta color printed correctly by the equipment?

• HP Deskjet 3050 a: font size

  My printer prints my very large documents with fonts, so half of the document does not print.  How can I fix?

  Welcome to the HP community @Johanned,

  I saw your post on the police really print grand of your Deskjet 3050 from your Windows 8.1 system, and I hope to help.

  The issue could be in one program you print from if you only see the question comes in one program. If that's what's happening, check the size of the font and preview before printing to see if it also shows the large font size.

  If the font is large for any program you print from, there could be a driver conflict. Try to run the print and scan doctor and choose difficulty Printing. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results.

  Try to print again, and I would like to know the results. I'll be there to help!

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  I hope this helps you!

• DeskJet 3050 a 1611 series to print wirelessly on Mac 10.10 yosemite

  How can I get my deskjet 3050 a 1611 printer to print wireless on my Mac 10.10 Yosemite WIRELESS?

  Agustin-Pinales Hello,
  There are two ways that we could get this to work, depending on your configuration. I would ask that you close the other post on the installation that you made so that others can find what was the solution, simply click "accept as a Solution.

  Now on your desktop with the way to wireless configuration. If you have a router that allows the WPS to be pushed, follow these steps.

  Option 1 - connect the printer to the network via the WPS button:
  On the police of the printer control panel
  1. press on the icon Setup - looks like a key
  2. Press 'OK' for 'Wireless '.
  3 use it up or down buttons on the right to select "Wireless Configuration".
  4. Press 'OK' for "Wireless Configuration".
  5 use up or down buttons on the right to select "Wi - Fi Protected Setup.
  6. Press 'OK' for "Wi - Fi Protected Setup.
  7. it will say you have two options, simply press the OK"" button.
  8. Select the 'Push' button for Setup WPS promotion
  9. follow the prompt on the printer press the WPS button on your router
  10. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  You can follow the same steps above to enter a PIN, just change step 8 for "PIN" and follow the steps.

  At this point, when the printer is connected to your network, you should be able to follow the steps to add new printer

  Option 2 - Connect using the utility (printer installed and connected via USB)

  1. click on the Apple in the left menu bar
  2. click on "System Preferences."
  3. click on «Printers & Scanners»
  4. click on the "HP Deskjet 3050 has" on the left to highlight
  5. click on the button «Options & supplies»
  6. click the button of "Utility" in the upper right
  7. click on the button "Open Printer Utility.
  8. double-click on the icon "Wireless Configuration".
  9. If your Mac is connected wireless, choose Yes, 'keep these settings', then press the continue"" button.
  10. Select 'Allow' If a confirmation is requested
  11. click on 'done '.
  12. close the 'utility '.
  13. click on "OK".
  14. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  Delete the print queue of the printer HP printer (unplug the USB cable to the printer)
  1. click on System Preferences
  2. click on Printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm

  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  You can also click on the link below for the other steps, if you need assistance. Or post here your results.

  Mac OS 10.10 Yosemite and HP printer supports

   

• Printer HP Deskjet 3050 a hesitate because long after command to print

  Printer HP Deskjet 3050 a hesitate because long after command to print.  How to fix this?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to add my hp HP Deskjet 3050 series has J611 to my hp windows 7 lap top taskbar

  How can I add my hp HP Deskjet 3050 J611 a series in my windows system tray 7 hp laptop?

  I'm on a 64 bit computer OS laptop windows 7, HP, and I need to be able to see the system tray icon that isn't there, even if I tried to use customize functionality, but the printer is not listed in the icon list and the option to choose the area.

  Please advise and thanks in advance.

  Hello

  Please try:

  Click Start > all programs > HP

  Right-click your printer, and then select "Pin to the taskbar.

  Kind regards.

• HP DeskJet 3050 J610 will not scan.

  OS: Vista 32-bit

  Error message: "error analysis. try to scan from the computer:

  No changes made to the system.  Was analysis correctly.

  When I try to scan from computer, trying to open HP DeskJet 3050 J610 series scanner icon on the desktop, does not open.

  Hello kkina6bz

  I have a few questions to help troubleshooting:

  • How your printer is connected?
  • The icon on the Desktop gives / error message or is it opens at all?
  • You have another computer, you can try scanning from? It would be one of the easiest ways to identify the problem.
  • Have you tried reinstalling the printer software?
  • Have you tried to run printing HP and doctor Scan? If this isn't the case, it is a diagnostic utility that can sometimes find the problems of scanning. HP Print and Scan Doctor

  I suggest following the procedure described in the article below. The article contains several possible solutions to correct the mistakes of scan from the control panel of the printer.

  A "connection error" or "No computer has detected" Error Message appears when you try to Scan from the printer control panel