DeskJet 3050 wireless printing

Similar Questions

• hp deskjet 3050 wireless printer will not work

  I configured my printer with a router and it shows that it is online but he used to ' show on my laptop

  Hello

  1. you receive an error message when you try to print?

  I suggest that you try the steps of troubleshooting provided in the link below to troubleshoot issues with the network printer.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  See also:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

• Example: Deskjet 3050 - J610: printer removes items in the print queue

  Please see problem posted on June 9, 2016 and thread support. Sorry, I don't know how to go on this subject but the problem that I've marked as being solved is no longer is. It it is possible to mark as resolved and to reopen the thread please let me know how and I would be glade to do. Essentially sent items to the queue printing are deleted until they can print. They show in the print queue and then are marked "delete." I ran Print ahd doctor Scan of my desktop PC, and he says that everything is OK with the printer. I can see what the ink levels in the printer, and it printed on the printer succcessfully diagnostic information when asked to do so. I can see all of the information on the model of the printer, the serial number etc. so it seems that the PC can see the printer. But it will not print emails or Word documents - while he has done it before. Problem seems to have started when I tried to scan a document in and it would not. Printer is connected wireless and has an IP address, it doesn't seem to be the firewall attached - I disabled the Anti Virus software and it will not print. It runs the Windows firewall good that cause issues? I disabled that too, but it did not help. I followed the intstructions given by Gemini02 a HP Support Agent and it seemed to solve the problem but it only did it once and then continued to remove items from the print queue. I also tried to turn off the printer and then the PC, left for a while and then restarted them and that seemed to work. He already showed the printer as offline and printing and scanning doctor fixed that but when I ran it but still it only printed once and then returned to the deletion of items in the print queue. Grateful for any advice anyone can offer please.

  Hi @Moonfire24,

  Welcome to the HP Forums!

  I saw your posts on how your HP Deskjet 3050 - J610 printer keeps deleting items in the queue in Windows Vista. And I'm happy to help you!

  Please try the steps in this guide, Print Jobs stuck in the queue (Windows), let me know what happens! (Even if the title of the guide may not correspond to your question, I think that the solutions will help.)

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  Hope this guide helps!

• Can't scan with a Deskjet 3050 wireless

  PC system: MB Pro 10.7 running

  Printers: Deskjet 3050 J610 HP inkjet driver 1.3.1

  IP address: 192.168.1.45

  Problem: Deskjet 3050 wireless more prints fine however when I want to scan it just happens to expire with the beachball o ' dead just spinning and spinning.

  I tried "Reset Printing System" remove and reinstall but same situation persists...

  Thanks in advance for any help you may be able to provide.

  OK, let's reset the printing system once more, restart the printer, the Mac and the router.

  If this does not work, there is no likey a software bug.  Let me know how it goes.

• Does anyone know how to use the HP Deskjet F4580 wireless printer

  Does anyone know how to use the HP Deskjet F4580 wireless printer

  Do you have a specific question or just general knowledge?

  The manual is available online here.

• DeskJet 3050 a: Deskjet 3050 a prints blur sometimes, new drivers, alignments, no cleaning, no joy.

  If I print a test page for the printer it comes out perfect.

  If I print a test page for Windows7 it comes out perfect.

  If I right click and highlight text when it is on the internet and press print it comes out blurry.

  Print an e-mail comes out blurry, even as wordpad.

  Basically, but no test pages come out blurry, unless I do a google search and find a random test page not associated with Win7 or HP which will be blurred.

  I tried new drivers, ink cartridges are fairly new, but they were good job and forwards the problem.

  I did several cleanings, alignments, not troubleshooting, no joy.

  He has been connected to the same USB port, worked many years.

  No updates of windows 7 or changes.

  No matter whether this printer is default, I also have a Canon iP2600 and it works perfectly, it was also in the years of system, once again no change, I can't see that would not cause this problem.  There is probably a change, but it is over my head as to what.

  Thank you

  Hi @bobscloud,

  Welcome to the Forums of HP Support!

  I see you are having problems printing with HP Deskjet 3050 a printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand how frustrating, it would be for you. You mentioned that you uninstall and reinstall the HP software. Looks like the drivers are corrupt, it is necessary to clean your system and try to reinstall again.

  Is the Canon iP2600 that printer as plugged in USB?

  You say that ' no updates Windows 7 or changes ", you have automatic updates is turned off? Please make sure that your Windows updates are up-to-date.

  When you install a USB printer, it is recommended that you disconnect the other USB printers during installation. In this way, the computer does not confuse the two and installs the correct driver.

  You unplug the Canon before reinstalling the HP Deskjet printer?

  I suggest to try the following steps in the following order for best results.

  • Utility of Microsoft Ms difficulty, diagnose and automatically fix the problems of the printer and printing.
  • How to troubleshoot Windows Installer errors.
  • Use the File Checker system to repair missing or corrupted system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  If the problem persists, I will try this solution.

  This problem occurs if there is printer drivers are corrupt.
  I suggest that you remove all installed printers and reinstall Windows 7 printer drivers if available.
    
  Remove a printer
  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.
  2 find the printers installed icons, then delete them.
  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".
  4. on the tab drivers, select them printers list and click Remove. Please, select Remove driver and driver package.
  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".
  6. try to remove all related printer software.
   
  If the problem is not resolved, I suggest that you clear the money printing system.
  Step 1
  ======
  Start Windows Explorer, and then rename all the files and folders in the following two folders:
   
  c:\windows\system32\spool\drivers\w32X86
   
  To rename a file, we can click with the right button on the file and select Rename.
   
  Step 2
  ======
  1. Click Start, type REGEDIT in the start search bar and then press ENTER.
  2. navigate to and then click the following registry key:
   
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86
   
  View the list of subkeys. There should be only the following subkeys:
   
  Drivers
  Print processors
   
  If there are any keys other than those listed above, follow these steps:
   
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type WindowsNTx86regkey - and then click Save to save it to your local office.
   
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environment\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.
   
  c. delete all keys other than drivers and print processors.
   
  Step 3
  ======
  Find and click the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key. View the list of subkeys. There should be only the following subkeys:
   
  BJ language monitor
  The local port
  Microsoft Document Imaging writer monitor
  Microsoft Shared Fax Monitor
  Standard TCP/IP port
  USB Monitor
  WSD port
   
  If there are any keys other than those listed above, follow these steps to remove them:
   
  a. on the file menu, click Export.
  (b) in the file name box, type a descriptive name for this key--for example, type Monitorsregkey - and then click Save to save it to your local office.
   
  We can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.
   
  c. delete all keys other than the above 5.
   
  Step 4. Disconnect the printer from the computer and restart the computer.
   
  Step 5. Reconnect the cable from the printer to the computer, install the printer according to the manufacturer's installation instructions and then check if the problem persists.
   
  You can also use these two articles for this problem:
  http://support.Microsoft.com/kb/2000007
  http://support.Microsoft.com/kb/933454

  If all else fails, I create a new administrator account and try again, difficulty of a user profile is corrupted.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Deskjet 3050 wireless but don't scan prints

  DeskJet 3050 will be printed laptop Asus but not scan. Previosly worked well. Still works fine for printing and scanning from Acer and Apple laptop to laptop. Running HP print and Scan doctor but still does not.

  Hello bigbird1961and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems with scanning.  I would like to help!

  I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• DeskJet 3050 wireless problems

  I have a Deskjet 3050. It worked just find with my old router. My new router, a Linksys E1550, not connect to the printer. I get a message that it connects, but the progress bar freezes at 20%. I tried the WPS automatic and incoming method in the PIN printer in the router. Any ideas I could try? What is the security settings?

  Thank you

  Ned

  Your router to use WPA or WPA2, WEP NO security!

  If this does not work, install your printer by getting the latest software for your printer from the "Support & drivers" link at the top of this page.  When you start the software, make sure that there is no USB cable connected to the printer.

  Choose "wireless" as installation type and follow the instructions.

• How fax on my HP Deskjet 3050 wireless has

  I have a PAVILION G7-1167DX LAPTOP, OPERATING SYSTEM WINDOWS 7, MY PRINTER, SCAN IS WORKING wireless, HOW DO MAKE MY FAX WORK wireless.

  I see that you two are having need help with the portion of the printer Deskjet 3050 a sweeping.

  Here is a link that will guide you on how to scan the front of the printer.

  http://support.HP.com/us-en/document/c02744417

  You can also search for the software on the computer. Click on the Solution Center.

  Choose scan a Document.

• Can I connect to the Deskjet 3050 wireless and LAN?

  I have connected to a new deskjet 3050 by WiFi. My laptop and iPhone worked well. I have an old desk top that has no WiFi. Can I also connect it to the 3050 by LAN? The office is connected to the router by LAN so it mails to my hpeprint but I would like to connect it directly to the 3050.

  Hello

  The HP Deskjet 3050 include wireless connectivity options and USB, the printer does not include any LAN interface...

  The printer connected to your wireless router, connection from the desktop to the same router via an Ethernet connection is sufficient, the type of conntaction used network is not serious as long as both devices connected to the same router.

  Make sure that ethernet cable connected to your router with a desktop computer and run the installation by selecting the wireless connection, the device should be detected on the network...

  If you wanted to can use a USB for PC connection, you can do the same. the wireless and USB connection can be used simultanly.

  Shlomi

• Series Deskjet 3050: test printing sheet but only blank sheets come out otherwise, also can not copy to printer.

  Has made no recent changes outside the update for Windws 10.

  OK, thanks for that.

  Here is the link for the drivers and software for your printer page: http://support.hp.com/us-en/drivers/selfservice/hp-deskjet-3050-all-in-one-printer-series-j610/4066450/model/4066451#Z7_3054ICK0K8UDA0AQC11TA930C7

  If that doesn't show Windows 10 when you open it, and then click change and select Windows 10 in the menu drop-down.

  The drivers, you need to download are full feature software and drivers.

  Remove all the existing drivers and the software of the printer.

  Install the new software of HP but have the printer unplugged and it do not connect until the installation program invited to do so.

  After the installation is done and you reboot, you should be able to use your printer without problem.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• DeskJet 1112: wireless printing

  I bought HP DeskJet 1112, which is advertised as a wireless printer. I don't know how to do wireless. I installed it as it is written, but the software in the CD provided and that in the HP site is 1110 series.  Whwn I unplug the cable USB of the PC does not see the printer. Maybe I am not doing correctly.  Is it really wireless?

  Thank you

  The specification for 1112 Deskjet says that it is * not * capable wireless, see here.

  HP ePrint connectivity capacity

  • NO.

  Mobile printing capability

  • NO.

  WiFi functionality

  • NO.

  Connectivity, standard

  • 1 USB 2.0 PORT

• DeskJet 3050 J611n print quality project to save ink

  DeskJet 3050 J611n.

  seems to have a very simple choice for the print settings in the printer properties. How do I change print quality of presetting of the premium for quality project that uses less ink per page?

  I don't need the full quality print every time and it is a waste of ink.

  Ditto paper waste: there is no setting for duplex printing automatic option?

  appreciate any thoughts on this

  Thank you

  I don't have a Vista machine handy to check, but in general settings don't 'stick' in Windows if done from an application but do when made from the Printers folder.  Try to go into the printers, right click on the Deskjet 3050, folder select Printing Options, choose what you like draft mode, apply, OK.

• DeskJet 3050 j610a - printing problems

  I have a Deskjet 3050 j610a, who is about to throw in the trash. Print quality has deteriorated so that color printing is catastrophic and I tried everything suggested in the documents on this forum and HP assistance. The ink levels are OK. The paper is OK.

  When you browse the suggested fixes, when I get to the "page" to print and scan alignment, the alignment page is not detected.

  I completely deleted the software and drivers and re-installed the ' software HP Deskjet full feature driver and "of here.

  I am running Windows 7 and now when I go to start > all programs > HP > HP Deskjet 3050 J610 series > HP Deskjet 3050 J610 series, nothing happens.  Same thing when I double-click on the desktop shortcut pointing to 'C:\Program HP HP Deskjet 3050 J610 series\Bin\HP Deskjet 3050 J610 series.exe' - UDCDevicePage begin. Small swirling icon indicating the program trying to start and then nothing.

  I can't reach the 'printer' Actions / areas 'Tasks of Maintenance', etc..

  It takes too long to fix for a printer under $100.

  Should I persist or throw him out?

  Problem solved.

  I threw and bought an Epson.

  My time is worth more that it took to solve these problems.

• DeskJet 3050: HP Deskjet 3050 not printing MAC

  I just bought a new iMac and I plugged my old Deskjet 3050. The drivers are installed and I can choose the printer but when I click on print nothing happens.

  The printer works on my old Surface RT.

  Hi @F45 ,

  I understand you are having problems printing of Yosemite. I'd love to help you.

  The drivers are installed by the Apple updates. Install a printer driver Mac using Apple Software Update.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Deskjet 3050)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver, you may need to click the drop-down list to select the printer name to add it in.

  

  

  Try to print again.

  If you're still having problems, try the following steps:

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Test the printer.

  Please let me know the results.

  Good day!
  Thank you.