Can't scan with a Deskjet 3050 wireless

Similar Questions

• Scan with HP Deskjet 3050 a problem - analysis only about a quarter of the page

  My HP Deskjet 3050 a wireless print fine with my Mac OS Lion 10.7.3. But whenever I scan something, catches sweep that results from only about a quarter of the page, which swells in size to take to the top of the entire page. (And I am regular sweeping 8 "x 11" documents. ") And I can't zoom in to get the entire page. When I try to change the setting in jpg to PDF utility, to see if that will solve the problem, the utility closes 'unexpectedly' every time.

  Hello
  First, install the critical update below:
  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg

  Now change the settings of the device as follows:
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.

  Kind regards
  Shlomi

• Can I connect to the Deskjet 3050 wireless and LAN?

  I have connected to a new deskjet 3050 by WiFi. My laptop and iPhone worked well. I have an old desk top that has no WiFi. Can I also connect it to the 3050 by LAN? The office is connected to the router by LAN so it mails to my hpeprint but I would like to connect it directly to the 3050.

  Hello

  The HP Deskjet 3050 include wireless connectivity options and USB, the printer does not include any LAN interface...

  The printer connected to your wireless router, connection from the desktop to the same router via an Ethernet connection is sufficient, the type of conntaction used network is not serious as long as both devices connected to the same router.

  Make sure that ethernet cable connected to your router with a desktop computer and run the installation by selecting the wireless connection, the device should be detected on the network...

  If you wanted to can use a USB for PC connection, you can do the same. the wireless and USB connection can be used simultanly.

  Shlomi

• Scan with HP Deskjet 3050 a problem - analysis only about a quarter of a page

  I use Mac OS x 10.5.8. My new HP Deskjet 3050 a scan only about a quarter of the page - which swells and then take to the top of the entire page.

  I posted a problem as a response, on 16/06/2012 but no response.

  Ask for help please.

  Please follow these steps on Mac computer.

  1. in the Mac menu bar, click Go (if you do not see 'Go', click on an empty area of the screen, then look at the menu in the bar at the top of the page)

  2. click on "Utilities" > click on HP utility > click scanning settings > click on "Scan to Computer".
  3. click on the tab "scan tasks.

  4. here you have to select the option that you use when the printer Panel analysis before for example 'Photo file' or 'Document to the file' > then click on the button "Edit".
  5. in a row option will appear:

  Analysis of device HP

  Change the file Type scan

  Move the items from the Finder

  Reveal the Finder

  6. Select "Device HP Scan" and now the next option will appear:

  Presets (combo)

  ************************************

  Choose the presets on 'Standard' and click OK, and then try to scan from the printer.

  .

• My iPad 2 can't find my printer deskjet 3050 J610 series wireless

  Hello. My iPad 2 can't find my printer deskjet 3050 J610 series wireless. Can I do anything to make it work?

  According to the list of compatible wireless Apple printers, support is the deskjet 3050 a. j611a is there something I can do? Some driver?

  Thanks for your help

  The Deskjet 3050 isn't compatible Airprint as mentioned above.

  In order to print wireless from your iPad, you need to use the HP ePrint home & Biz application:

  http://support.HP.com/us-en/document/c02775166

  Kind regards

  Shlomi

• DeskJet 3050 wireless printing

  I am using windows

  Is it possible to print to Deskjet 3050 wireless? No router?

  I wonder if it is possible to print wireless and have the printer to connect wirellessly to the laptop without going through a network (router).

  Currently I can fine prnt using the USB cable, but as for not using USB cable and wireless directly on the printer.

  I downloaded the manual and read it here...

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&ContentType=SupportManual&prodTypeId=18972&prodSeriesId=4066450

  It supports no special printing, so not, you must use a router or a cable.

• Why can't I make my Deskjet 3050 to the default printer

  Why can't I make my Deskjet 3050 to the default printer?

  OS windows 7 home 64 bit.

  Repeat the previous printer is default but I uninstalled

  Hi lions99 just to update your printer sorted now something to do with the connection to the router / laptop and printer, all a bit above my head when he was explaining to me, he needed all the info from router to set up because he did not find it automatically.
  Kind of sorted now thank you again for your much appreciated efforts.

• HP Deskjet 3050 wireless but don't scan prints

  DeskJet 3050 will be printed laptop Asus but not scan. Previosly worked well. Still works fine for printing and scanning from Acer and Apple laptop to laptop. Running HP print and Scan doctor but still does not.

  Hello bigbird1961and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems with scanning.  I would like to help!

  I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Can now print :-), but still can not scan with USB or wireless

  Hello

  Like many of us, I just upgraded to Windows 8 Pro (64-bit) and discovered during my first attempt to analyze the printer can't find my printer.  I uninstalled the HP software and re-installed using the installer on the HP website. Printing but scanning doesn't always work, fade via the USB cable or wifi.

  I'm quite a common scanner and need someones help with this.

  My printer is a Deskjet 3050 a - all in one.

  Thank you

  Eddie

  Hello, Eddie.

  The software for your Deskjet 3050 a is available:

  • 32-bit: DJ3050A_J611_1315.exe
  • 64-bit: DJ3050A_J611_1315.exe

  Before installing the new software, unplug your all-in-one to your pc.

  If you still have problems, try uninstalling/reinstalling the new software.  The OS upgrades are sometimes tricky.

• How fax on my HP Deskjet 3050 wireless has

  I have a PAVILION G7-1167DX LAPTOP, OPERATING SYSTEM WINDOWS 7, MY PRINTER, SCAN IS WORKING wireless, HOW DO MAKE MY FAX WORK wireless.

  I see that you two are having need help with the portion of the printer Deskjet 3050 a sweeping.

  Here is a link that will guide you on how to scan the front of the printer.

  http://support.HP.com/us-en/document/c02744417

  You can also search for the software on the computer. Click on the Solution Center.

  Choose scan a Document.

• DeskJet 3050 wireless problems

  I have a Deskjet 3050. It worked just find with my old router. My new router, a Linksys E1550, not connect to the printer. I get a message that it connects, but the progress bar freezes at 20%. I tried the WPS automatic and incoming method in the PIN printer in the router. Any ideas I could try? What is the security settings?

  Thank you

  Ned

  Your router to use WPA or WPA2, WEP NO security!

  If this does not work, install your printer by getting the latest software for your printer from the "Support & drivers" link at the top of this page.  When you start the software, make sure that there is no USB cable connected to the printer.

  Choose "wireless" as installation type and follow the instructions.

• problem printing with HP deskjet 3050 all in one J610 series

  I have a printer HP deskjet 3050 all-in-one series J610 which I use with Windows Vista Version 6.0 (Build 6006: Service pack 2).  The connection is by USB port.  I have not used the printer for a while, but did all the maintence checks & it's good to go.  When I want to print a letter the only thing that is printed is the e-mail address that is blue in color.  I think the problem is in the settings of the features of the printer.  I can print the letter in gray scale, but it is not easy to read and is not suitable for business relationships.

  I would appreciate help with this problem.  A definition of the terms used in the features of the printer can help me to solve it in myself.

  Thank you

  I had a computer guy watch the printer for me.  It was broken & he just buy a new, he said.  I did it.

  So thanks for trying to help.

• HP Photosmart B110: I can not scan with my photosmart B110

  I CAN'T PRINT WITH MY PHOTOSMART B110 PRINTER COPY SCANNER. EROR MESSAGE IS

  "TRY TO SCAN FROM THE COMPUTER DOCUMENTATION OR SEE"

  I HAVE MISPLACED THE INSTALLATION CD

  PLEASE LET ME KNOW WHAT TO DO

  Best student

  Emeka

  Hello
  
  Thank you for using the HP Forums. You can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926 & h_lang = on & h_client = s-h-E016-1 & h_keyword = DG - PDU

  If this does not work, remember to uninstall and reinstall the software COMPLETE features, follow these steps:
  
  1 uninstall the software from your computer
  2. download and save the software COMPLETE features (do not install online)

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe

  3. install the FULL feature software "saved".
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps!

• I can't scan with my kodak all in one soft ware, but I can with the windows Wizard can help you .kodak's struggle to solve the problem for me

  I have windows xp 32-bit 11gigs of free space on the hard drive.kodak said that the software is not installed properly.they tried repeatedly by SANDRINE remote access

  Hi georgeey,

  Please report the problem to the Microsoft Community Forum.
  If we understand it, you cannot scan with the kodak camera.
  We will help you solve the problem.
  1. What is the model number?
  2. have you made changes on the computer recently?
  3. do you get an error message when you try to scan?
   
  It is possible that Kodak may have an older version of its software that works.

  http://support.en.kodak.com/app/answers/detail/A_ID/23858/related/1/selected/true

   

  Method 1:

  Try to install the software to clean boot, and then try to scan

  Reference:

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: Reset the computer to start as usual after a repair.

   

  Method 2:

  If this does not help, please uninstall and reinstall the device driver.

  a. go to control panel and select the device of scaning

  b. right-click on the device and select Uninstall tab drivers.

  to reinstall the driver to see the link given above manufacturer Web site.

   

  Hope above links help you. If the problem persists, you can write back to us and we will be happy to help you more

• HP ENVY 5530: Can't scan with HP ENVY 5530 more...

  Hello

  I could scan it with the printer. All of a sudden, I can't not andy. If I click on the icon, I get an installation guide...

  I want to put serveral photo in this post, but I note here insert/edit image tool not working anymore

  Hi @dbj5577,

  Welcome to the Forums of HP's Support. I understand that you are no longer able to scan with the HP software. I would like to help.

  Try to run printing HP and doctor Scan.

  HP printers - help print and scan the doctor for Windows to solve printer problems

  The last time I had a problem like this a simple uninstall and reinstall fixed.

  Additional troubleshooting issues are from the following link.

  HP printers - printer problems after upgrade to Windows 10

  Let me know how things work.