DeskJet 3054a - problem with printing a cover unwanted page

Similar Questions

• HP Deskjet 3050: Problems with printing in color?

  Hi all, I have problems printing in color. No idea what to do. Here's the problem: I'm trying to print in color and the colors look darker on one page, my colors are fine then saw green to halfway through until its finished. On another page, the colors are ok, but some colors are missing.  I tried the cleaning test, the colors seem to come out ok! Tried to see the ink and the remaining portion. It seems to be more left black and yellow, cyan and magenta. No idea what do then, never had this problem with the printer before. Thanks for any help!

  Looks like you have a cartridge that is short of magenta or default.  This can happen to cartridges that are very old, even if they still have ink or third party cartridges that were not filled out properly.  The steps of troubleshooting in the paper here may help, but I suspect that you need a cool color cartridge.

• DeskJet D2360 - problem with printer, printer light flashes will not respond to print requests

  My printer has stopped printing during a print job and now the power light is flashing continuously and does not not to print requests.  I tried to delete the print jobs in queue but still without success... any suggestions gratefully received.

  Do well the things easy first, so yes, put everything in a new HP cartridge.   I would like to install the software to help.

• Connected HP OfficeJet Pro 8600 Plus status reads "problem with printer."

  I could just ePrint on an OfficeJet Pro 8600 Plus replacement and them have not used for printing yet. I was in the devices page to manage the settings and change an address for one of my devices. The newly added column 8600 State reads 'Online', but also 'problem with printer '. Instructions I was referring to the display panel of the unit for Outlook2003 on the given problem. A check of the display surface showed no information, just a typical home screen. I checked through the display print and found no problems-all functionality is enabled and fully functioning. I checked then the functions of printer in the window 'Printers and devices' of all computers (all running Windows 7 Professional) on the office network. The 8600 are active and full functionality works correctly between the printer and all the computers.

  I then close the printer 8600, left for several minutes, and then lit it back and reconnected. The State says 'Problem with printer' remains in the device window HP.

  I am at a loss as to what this supposed problem can be and don't know what should be a next step. Does anyone have any advice or information that could help in this situation? It would be appreciated. Thanks in advance to those who could help

  HP support responded to my question by e-mail. I was told that the message 'Problem with the printer' is due to a bug in their system. Also said that as long as the status column indicates the printer is "Online" and everything else is fnctioning correctly, don't worry about this.

  I consider that a resolution of the post!

• I have a problem with printing on Windows Vista.

  I have HP desktop with Microsoft Vista operating system.  The printer I have is HP Laser Jet P1006.  1 months ago about the computer wouldn't print or download an attachment to an email.  I uninstalled the printer and re-installed, but the problem persists.

  What happened, it was this.  With an email (from gmail.com or hotmail.com) once I clicked 'print', the normal menu for printing that should go up.  Then I clicked 'print', the monitor would show a display of the menu "save under" and showed the formulations of XPS as 1 line and XPS Documents like the following line.  When I chose the option search for a printer and typed in the name of the HP Laser Jet P1006 printer and click "select", the system responded to that file name is not valid.

  Please explain what was wrong and how to fix these problems with printing and download of attached file.

  Hello

  Please contact the Microsoft Community.

  Have you tried to print using a different printer?

  I would have you try the steps of troubleshooting in these articles.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/troubleshootResults/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_e97ce00a6f76436cc859bfdeb053ce01=wsrp-navigationalState%3Daction%253Ddoclist%257Ccontentid%253DK.01.05.02&javax.portlet.tpst=e97ce00a6f76436cc859bfdeb053ce01&sp4ts.oid=3435682&ac.admitted=1402468218790.876444892.492883150

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&CC=UK&DLC=en&LC=en&product=3435684

  Note: I would first try to 'doctor HP Print '.

  If this problem is limited to the HP printer, so I'd like you to contact the respective support]-

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3435684

  We know if you need help.

• Problem with printing in format Adobe acrobat, DC

  Help

  I have can´t open the Printmenu and print my documents in format Adobe Acrobat, DC

  Since some day´s a can´t print my documents in Adobe DC.

  What I did:

  0 reinstall new driver for my printer

  1. New Installation of Adobe Acrobat DC

  2. Installation of the New Apple OS X el Capitan software.

  3. what once again deleting the installation of Acrobat and the installation of new Adobe acrobat DC.

  4. all other software can use the printer on my system.

  Important: before that I had problems with printing works I didn t have had problems.

  What can I do?

  Thank you

  Neugebauer, Germany

  Hi frankn30090339 ,

  Sorry for the inconvenience.

  You can download the latest patch that contains the resolution of this problem.

  Please see this link: failed to print in Adobe Acrobat format

  Let us know if you need additional assistance.

  Concerning

  Sarojini

• Problem with printing pdf from Adobe Acrobat Pro

  Hello

  I have Adobe Acrobat Pro 9.4.3.

  PDF-print has always worked a lot, but all of a sudden, there is some kind of problem.

  After you print a "Print to PDF" built-in excel document in MacOS or Adobes printer I have PDFs corruptet when showing them in Adobe Reader/Acrobat, but MacOS software preview shows them correct.

  So there can't be any problem with printing, but the local preview on my computer using Acrobat or Reader. I don't even use the Myriad in document police, I use Verdana.

  

  You say you use Verdana, but you're not. The error message clearly indicates that you use MyriadPro "BOLD".

  You probably recently installed Mac OS X 10.6.7 update that has a bug with OpenType PostScript as "BOLD" MyriadPro fonts. Use the Verdana or another font TrueType or PostScript, or come back to Mac OS X 10.6.6.

  Discover the problem here: http://www.tidbits.com/article/12078

• I'm having a problem with the pictures on some pagies partially of fully duplacating other tiles nearby. Only occurs with Firefox.

  I'm having a problem with the photos on some pages partially to duplicate completely other tiles nearby. Only occurs with Firefox. The thumbnails are refreshed when I move the cursor over them, but again distort when you scroll the page. I have a few images, but cannot up-load them on this page of support for some reason any. Maybe I can email you if you need?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check the preferences of network.http. * on the topic: config page and make sure that they have the default value.
  You can restore the default user set prefs ("BOLD") via the context menu.

  • http://KB.mozillazine.org/about:config

• Problems with access to the web pages, email, video, etc. even when I have 4-5 bars.

  I installed a Dell Wireless 1505 low-profile carrier 1.2 antenna dim/insp in desktop. Its a PCIe wireless lan card. But since last Tuesday patches have been installed I had problems with access to the web pages, email, video, etc., even when I have 4-5 bars.  Someone at - it an idea of what's going on.

  Hi William e. Swann

  1. what web browser do you use?

  Method 1:

  You can read the following article and check.

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  Method 2:

  You can also read the following article.

  How to troubleshoot network connectivity problems in Internet Explorer

  Hope this information is useful.

• Problem with the HP drivers Download Page

  Don't know where best to post this topic.

  I have problems with the HP driver download Page. Using the Chrome browser, I installed the HP product detection utility. Once installed, I admitted that it runs, and it correctly detected my HP computer and the details about this poster. A detail that he displayed was the guarantee being exceeded.

  Since I had hardware problems and had to replace the hard drive and reinstall Windows, I wanted to make sure that my computer has all the HP drivers and software required. This information would not be displayed. At first I thought it was because I had an active browser add-on. I've disabled and reloaded the page. This is where I'm having the problem.

  The product has been detected once more, but nothing happened when I clicked on the button search solutions for the detection of the product page.

  You have found the difficulty that has the utility.

  I never had a large measure of success with the utility unless I use Internet Explorer. I rarely use Internet Explorer.

• Problem with script on the master page

  So I have my build script of the unique number bit that I have posted here before... it's on the Initialize event of the field.

  
  

  If (this.rawValue == null) {}
  var d = new Date();
  this.rawValue = parseInt(d / 1000);
  }
  else {}
  this.rawValue = rawValue;
  }

  Which works very well if on the body of the form, but if I put it on the master page it re - initializes (and changes the number) whenever a subform gets shown/hidden. No idea how to stop it from doing this? I tried it on a few other events without a bit of luck.

  I came across another problem with this script, a field called 'Date' was interfering with the script - throw an error "the Date is not a constructor. Is - this normal (function/field collision)?

  Hi Jono,

  I had problems with script within the Master pages before. What I've done in the past, it is a textfield hidden in the main pages of script with overall binding (which featured many here today); then same name textfield in the master page picks it up.

  Good luck

  N.

  Post edited by: Niall O'Donovan

• Problem with printer HP Deskjet Ink Advantage 3515

  Hello. First of all, I would like to wish all a happy new year!

  I recently bought a printer HP Deskjet Ink Advantage 3515. The printer works fine (prints, scans, and copies). There is only one problem with it. It returns me an error when I l ' turn off. This happens very often, but not always, it is a little annoying. The error appears as: ERROR CODE SM_MODULE C 0X02B7C2ED (the error is also shown on the image). I tried to Google the problem but without effects. I don't know what could be the problem. Can someone help me please, because I have no idea what could be the problem. Thanks for the replays.

  

  This problem has been resolved. It was my router D - Link DIR-615 which was causing the problem all the time. When I changed the router to another at the beginning of the printer stop normally.

• HP AIO 1515: problem with printing photo 13 x 18

  Hi I have a problem with the print photo (13 x 18) size she cut in the end of photo I use hp photo creations but if choose 100% size or fullscreen, same result please what can I do;  I am disappoint bought this printer if photo print well

  Please help me

  Hi @nik1,

  I see by your post that the printer cuts off the image when printing on paper 13 x 18. I want to help you.

  According to the specifications of the printer, it does not support this paper size. You will need to use a supported paper size. The largest size is US legal 8.5 x 14 inches.

  Specifications of printer for printer HP Deskjet 1510 and Deskjet Ink Advantage 1510 All - in - One Printer Series.

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• Problem with printer or ink system failure

  I have a HP Officejet 6600, and I get this message:

  "There is a problem with the printer or ink system.  Turn the printer off, then on.  If the problem persists, contact HP. »

  Well, I did it.  I have also run the hardware diagnostic tool, which had me unplug the printer and turn it back on, and I did it a couple of times.  I always get the error message.  I also took printhead of the printer and put back them in.  Does anyone have a solution that might be able to share with me for this problem?

  Thank you

  Melinda

  My problem was solved by the link in the first reaction after my post. I tried power downs and plug the tire, but following this post EXACTLY... worked. The method of pulling on the power cord of the printer with it cleared the error message and everything has worked perfectly since

• OfficeJet Pro 8500 has Premium - problem with printing PDF documents

  My boss has the printer/HP Officejet Pro 8500 Premium has in his office. He had problems with the printing of PDF documents. As a general rule, what print is either unintelligible or will have a black line at the top of many pages, even if it's just a 1 page document. No problems printing on other types of documents, only the PDF files. Is it possible to fix this? Thank you!

  Try the following setting and let me know any changes:

  Adobe Reader, launch the dialogue of the printer.

  Click on Advanced Options at the bottom of the dialog box.

  Check the Print as Image checkmart.

  Click OK to approve and try to print