DeskJet 3512 simultaneous usb and wireless?

Similar Questions

• Can I use a deskjet 2545 with usb and wireless

  I have a computer laptop w / wireless and your desktop w/o - How do I use a deskjet 2545 with two computers?

  Hello

  You would add probably twice, a printer each having its own profile.

  This is how works office.

  If in doubt please ask.

• m251nw usb and wireless at the same time?

  I'm about to buy a m251nw laser color printer, but I want to make sure that it can print both a wireless connection and a USB on my desk at the same time.  I read the manual, but we didn't on this point.  In other words, I want to be able to print from the desktop via USB while for example my wife prints from the iPad at the same time.  Thank you.

  Hello

  Yes, there is no problem.

  While that wired (ethernet) and wireless network connections do not work simultaneity, USB and Wi - Fi can operate and will not interfere with each other.

  Kind regards

  Shlomi

• HP PhotoSmart 6525 Switching Back-and-Forth between USB and wireless

  Hello

  I set up my HP PhotoSmart 6525 following installation 'wireless with a router' instructions (i.e. No Direct wireless).  I am able to print from my laptop through the wireless network.  I would also like to be able to print from my laptop using the USB connection at the time where my laptop is physically sitting next to the printer.  At times where it is not the case, I want to continue to be able to print wireless.

  Is it possible to install the printer drivers on the laptop so that I can switch easily back and forth between printing USB and wireless printing?  I suspect that it is not possible because of the user's guide has a section describing how do to "Change a USB connection to a wireless network" you click on an item of menu called "convert a connected USB printer wireless.  There are no instructions to know how to convert USB.  In addition, the use of the word "convert" makes no sound as you can maintain the two methods to print simultaneously on a single computer.

  Does anyone know if this is possible and if so, how?

  Thanks in advance,

  Paul2

  Hey Paul2,.

  I see that you have the HP Photosmart 6525 installed for a wireless printing capability and would also like to add a USB driver so that it is available for use by the printer.  Please follow the steps below to add a copy of the printer for USB printing.  The steps below are for Windows 7 and below computers.  If you have Windows 8, then the steps will be slightly different then let me know.  Please let me know if you have a Mac, because I can provide these steps at this point here.

  • Press the start menu of the computer
  • Select all programs
  • Open the HP folder
  • Open the folder for the Photosmart HP 6520 series
  • Select "printer setup and software."
  • Select the option to add a new printer
  • Select the USB option
  • Connect the USB cable when the software asks and proceed through the installation process

  You let driver Jack without wire in place and add a second printer in the devices window and print USB printers.  The USB printer may contain 1 copy in the name as a differentiation, but it must also indicate network in the name of the printer to indicate that it is the wireless option.

  I hope this helps.
  Jason

• USB AND wireless?

  Is it possible to use the USB connection or with a Deskjet F4580 wireless?

  I have a working PC connected to a connection high speed secure via modem and a host on another connection network broadband with a Wireless Modem/Router. I want to use the USB to connect to the PC work and wireless connection to the network home for the family to share. I can not connect work PC to a home network for security reasons.

  Is this possible? If so, how?

  Thank you, Andy

  It is possible. And there is no special measures to do this. Simply follow the Quick Start Guide here you received with the printer to install from USB and wireless connections. Just make sure that you do not print or scan to\from the printer from EVEN of multiple PC TIME! That will cause problems.

• Wireless all-in-one USB and wireless?

  Hey guys, I am looking for a Photosmart 6520, but something I read makes me rethink her... I need the next upward set:

  1 Desktop - connected computer with USB

  1 laptop - connected wireless

  1 iPad - connected wireless

  2 iPhone - connected wireless

  Now that I read if you have a computer hooked up with a USB connection, then the wireless features do not work, is it true? I don't want to connect to my office on my wireless network, I want to stream USB but I need other devices to operate on the wireless network without having to pick up things and re - install the drivers every time. Thank you

  Hello...

  I'm sorry that nobody has answered your inquery about connectivity on the HP Photosmart 6520 options.

  Yes, you can connect to the printer via * two * USB and wireless at the same time.  The situation you describe will work perfectly with your desktop computer connected via USB and other wireless devices (laptop, Tablet, phone, etc.) send print jobs via 802.11n / g.

  Please let me know if you have any other questions...

• Can you have configured USB and wireless printing simultaneously on mono Laser HP 1102w

  Hi guys / HP,.

  I was wondering if you have the configuration of p1102w printer HP mono laser for both cable USB2 cable to laptop and wireless at the same time.

  Try to install the printer with the two configurations via the installation on my HP Pavilion dv6 laptop CD.

  Because when you install the printer CD, he asked for one or the other i.e. USB or wireless.

  Y at - it an easy solution.

  Concerning

  Mike

   

  [Content removed]

  Hello

  You should be able to connect the two, but not Ethernet and wireless at the same time.

• Satellite A100-785 - after the virus the bus USB and wireless do not work

  Hello
  I have a Satellite A100-785 with Vista 32 bit.

  I installed the Windows updates and another program. My antivirus detected a virus and delete files and now the USB bus and wireless do not work.
  I downloaded and installed a new driver for my model, but it does not work.

  Help, please!

  And, I want to recover the factory setting but I don't have a recovery CD now. How can I restore to factory settings? If cannot repair with the method of mormal and kare without recovery CD.
  See:
  [http://i39.tinypic.com/rw4f8p.jpg]

  Hello

  You should try to remove the devices that they are marked with a yellow exclamation point. Start Notepad, and then install the latest drivers from the Toshiba site.

  If the virus has destroyed an important system files that it s is no longer possible to install a driver and you need to reinstall Windows using the Toshiba recovery disc.

  Did you create the Toshiba Recovery disk? You can do this with the Toshiba recovery disc creator, which is preinstalled on your laptop. Maybe you are able to do this at the moment.
  In addition, you reinstall Windows using the recovery of HARD drive option. So go to the advanced boot menu and select Repair my computer. Some Windows files will be loaded and then you can choose the Toshiba Recovery option and follow the instructions on the screen.

  If you can t create the recovery disk, you must order a new Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Want 5540: Connectivity, can I use want 5540 USB and wireless on two nearby PC win 7 and Win10

  Can I connect the envy to one not wireless pc (Win 7) USB and a new PC wireless Win10. A single pc in use at the same time...

  My HP C3100 unit is old and broken, sounds like a cement mixer, but still trying on USB only.

  Hello

  Thank you for using the HP forum.

  The answer is 'YES '.

  Just make sure that you download and install the software (with the correct operating system) on each of the PCs.

  Hope that helps!

• HP 6830 can be configured to print with USB and wireless?

  a provide you with similar instructions to put in place the USB and use wireless to my hp 6830 on an iMAC running on OS X Yosemite 10.10.5?

  Hey @kj6311,

  Welcome to the Forums of HP Support!

  I see that you want to install your HP Officejet Pro 6830 e-all-in-one printer via a USB cable connection and the connection Wireless on your computer Mac OS X 10.10. I want to help you with this today. Can I please you follow the steps below.

  Step 1: Set up the device:

  To begin, we will set up and install the version without wire of your printer.

  1. On the front panel of your printer, swipe, and then select Network Configuration
  2. Select the wireless settings
  3. Make sure that Wireless is enabled
  4. Then choose Wireless Setup Wizard
  5. Select your network name (SSID)
  6. Enter your wireless password. Is case-sensitive.
  7. Once the wireless connection has been configured on your printer successfully, proceed to the next step.

  Step 2: Install the wireless device:

  1. Please click here to download the latest driver for Mac OS X 10.10 for your printer
  2. Run the network installation
  3. Once the wireless installation completed successfully please try wireless printing to confirm that your printer works via the wireless connection. Once tested, please proceed to the next step.

  Step 3: Install the USB device:

  Please connect the USB cable from your printer to the computer.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  5. in the 'name' section, add USB until the end of your name of the printer so that you can make the difference between the two Officejets.

  6. click Add to add the printer to the list.

  Now you should have two copies of your printer showing under Print & Scan. Please let me know if the steps to solve your problem. Good luck!

• Printing via USB and wireless error

  Hi my printer is a HP deskjet 3050 a printer all-in-one.

  He stopped to communicate with the computers in the House when we had questions related to internet. LLA modem has been reset.

  I uninstalled it and reinstalled the printer drivers and I can send the documents to the correct printer from the desktop and the laptop, and then I get a print error message. When I click to see what's printing, the document is listed in the queue, but it shows a document with three circles on it rather than on a Word Document.

  What happens on both computers and connected printing and wireless.

  Any suggestions?

  Thank you

  Hey @soleruler,

  If the printer only displays in the list programs and features on your Windows 8.1 systems indicates that generally your Deskjet 3050 has e-all-in-one printer was probably not installed correctly in the first place. You can certainly use the option "Remove hardware" under "Devices and printers" on these 3 computers to remove old copies of the printer. Just make sure that when you go to remove the unit there is no print jobs stuck in the queue. Print jobs stuck in the queue will cause the printer go into a status of "withdrawal" but the Deskjet printer will not erase until jobs are deleted. To check the queue just right click on the printer under devices and printers, and left click on 'see what's printing. If something is in the box, then just right-click on it and 'Cancel' jobs. Once cancelled, then you can proceed with the option "remove hardware".

  Let me know how these steps go for you. Good luck!

• USB and wireless together?

  Just bought printer Photosmart D110.  It is probably a very simple question, but can it work USB on a computer and wireless on another at the same time?  A computer is a desktop computer with no wireless capability, the other is a laptop that works almost exclusively with wireless.  Both computers allows the D110 without having to change the settings for the printer all the time?

  Yes, but you don't have to.  Your router will give access from a wired device to a cell phone and v/v.  Try it!

• DeskJet F4580: help! DeskJet F4580 no USB cable wireless configuration!

  Hello!

  I recently got an opportunity of HP Deskjet F4580 of my university degree all-in-one wireless printer and I can't understand how to set up for printing. The person who gave it to me had more the USB connector, but they said I should be able to put it up though as it is a wireless printer.

  The problem is that all of the messages that I found on this issue, said either connect manually to Wifi using a USB cord, press the WPS button on the router for a long time until it the printer automatically connects to the router (I tried this and nothing happened), or press the wireless to the printer and then connect to the wireless connection , it emits and then use this method. The question ultimately is that even if I am able to get the flashing blue wireless key none of my devices wireless recognizes the printer as a wireless network (at least not as far as I understand).

  I tried to set up since yesterday and I'm really mixes responses to what I should do. Can someone please help me solve this problem?

  Thanks in advance

  Yes you will need a cable to USB printer like this.

  https://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_1?s=PC&ie=UTF8&QID=1471960536&SR=1-1&keywords=printer+USB+cable

  Then, download and read the Guide here...

  http://support.HP.com/us-en/product/HP-DeskJet-F4500-all-in-one-printer-series/3944755/model/3944756/manuals

  and follow the instructions to connect through the connection of Tradional wireless.  Only insert the cable when the software tells you to do.

• HP USB and wireless Lan update failed to install

  my USB hard drive can not be found and I noticed the Intel USB 3.0 extensible host controller FAILED to install the software update and also the Ralink Wireless network driver update / LAN also failed to install, I tried other USB hard disks, and they can also be seen, whats the fix for this please Thank you

  Well, it's different, I went to the control panel and found find and solve problems and clicked on it and went to the configuration of a device and ran the troubleshooting and it says problem found hardweree changes could not be detected...? which is weird, but Defected said... and it seems to work fine now, I listened to 2 and 1/2 hours of music and watcthed 2 complete movies and it seems to work fine now so there was me but still pretty strange thing that can happen thank you for your help and all who responded ) soon )

• Satellite L40 - loss of usb and wireless

  Hi all.

  New Member here.
  I have a laptop of Satelite L40.
  I hope someone can help?

  All of a sudden I lost all ability to port and wireles usb.
  My usb ports to power my devices, but Duke used everything is in the port.
  I also lost wifi too. device is not listed in Device Manager. its as if it just disappeared?

  According to windows my driver works properly and is up-to-date, but windows is not same regognizing there is even a hardware wifi adapter installed according to Device Manager all the usb ports and the drivers are working properly and are up to date.

  My hardware wireless network adapter comes from the cooperation of Realtek. I really hope someone can help?

  Hello

  > my usb ports to power my devices, but Duke used everything is in the port.

  chipset drivers (driver of the usb controller) is responsible for this function. Update of the [drivers Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  You can also try to remove all the controller driver USB in the device list before installation

  > my hardware wireless network adapter comes from the cooperation of Realtek

  try to update driver wlan too

  http://APS2.toshiba-tro.de/WLAN/?page=downloads