Can I use a deskjet 2545 with usb and wireless

Similar Questions

• HP 6830 can be configured to print with USB and wireless?

  a provide you with similar instructions to put in place the USB and use wireless to my hp 6830 on an iMAC running on OS X Yosemite 10.10.5?

  Hey @kj6311,

  Welcome to the Forums of HP Support!

  I see that you want to install your HP Officejet Pro 6830 e-all-in-one printer via a USB cable connection and the connection Wireless on your computer Mac OS X 10.10. I want to help you with this today. Can I please you follow the steps below.

  Step 1: Set up the device:

  To begin, we will set up and install the version without wire of your printer.

  1. On the front panel of your printer, swipe, and then select Network Configuration
  2. Select the wireless settings
  3. Make sure that Wireless is enabled
  4. Then choose Wireless Setup Wizard
  5. Select your network name (SSID)
  6. Enter your wireless password. Is case-sensitive.
  7. Once the wireless connection has been configured on your printer successfully, proceed to the next step.

  Step 2: Install the wireless device:

  1. Please click here to download the latest driver for Mac OS X 10.10 for your printer
  2. Run the network installation
  3. Once the wireless installation completed successfully please try wireless printing to confirm that your printer works via the wireless connection. Once tested, please proceed to the next step.

  Step 3: Install the USB device:

  Please connect the USB cable from your printer to the computer.

  1. click on the menu of Apple , then Preferences System.

  2. click on Print & Scan and then check if the name of your printer appears in the printer list.

  3. click on the plus sign (), click Add a printer or a Scanner, click the name of your printer.

  4. click on the area of use or with the help of Print and then select the name of your printer on the shortcut menu. Ensure that the Officejet driver is selected.

  

  5. in the 'name' section, add USB until the end of your name of the printer so that you can make the difference between the two Officejets.

  6. click Add to add the printer to the list.

  Now you should have two copies of your printer showing under Print & Scan. Please let me know if the steps to solve your problem. Good luck!

• DeskJet 3512 simultaneous usb and wireless?

  I have summer/am hoping to be able to set up so that my wife could print 'Wireless' so that I could maintain the ability to print from my desktop. Now, I see that I must "move" backwards?

  Is there a way that it can be placed on my desktop USB while allowing it to print from the laptop, whenever she needs?

  Hope that makes sense has failed to find anything while I was searching for this problem... ?

  Thank you!

  Connect your via USB, install the printer.  connect wirelessly to the woman, the printer and wireless.  Should work just fine.

• Wireless all-in-one USB and wireless?

  Hey guys, I am looking for a Photosmart 6520, but something I read makes me rethink her... I need the next upward set:

  1 Desktop - connected computer with USB

  1 laptop - connected wireless

  1 iPad - connected wireless

  2 iPhone - connected wireless

  Now that I read if you have a computer hooked up with a USB connection, then the wireless features do not work, is it true? I don't want to connect to my office on my wireless network, I want to stream USB but I need other devices to operate on the wireless network without having to pick up things and re - install the drivers every time. Thank you

  Hello...

  I'm sorry that nobody has answered your inquery about connectivity on the HP Photosmart 6520 options.

  Yes, you can connect to the printer via * two * USB and wireless at the same time.  The situation you describe will work perfectly with your desktop computer connected via USB and other wireless devices (laptop, Tablet, phone, etc.) send print jobs via 802.11n / g.

  Please let me know if you have any other questions...

• Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  Got a 27 "monitor from Apple, with thunderbolt (error). My MacPro can't love at first sight. Apple won't bring back the monitor. Will using a USB 3 map and then using a hard drive with USB 3 and Thunderbolt works?

  N ° you need a computer logic board which has built in Thunderbolt.

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• can you use a deskjet 970cse in black only mode when the color cartridge dries up

  can you use a deskjet 970cse in black only mode when the color cartridge dries up? Thank you, Jerry

  banhien information is very accurate. I would just add a bit of it. Because this printer uses a tricolor cartridge and a black, it should be one of the printers that will print with just the black cartridge installed. It is called print in backup mode. I should happen automatically when you remove the color cartridge and try printing. A message will arrive on the printer or the computer and ask you if you want to print in backup mode. Say yes, and it should let you print. Hope that helps.

• Can I use your Apple TV with MacBook Air

  I use a MacBook Air, 13-inch, mid 2013, OS X El Capitan 10.11.6. I am interested in Apple TV. With this product I was able to connect my Epson EB - S18 projector to my Mac in order to project movies that I bought on iTunes on my wall of the apartment? Would be there is always a problem to play these movies 'protected' outside the computer itself? Must they be downloaded in SD and not HD? Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port? Can I use a patch to connect the VGA cable to the port on the computer to the projector? Please notify.

  Thank you very much.

  Can I use your Apple TV with MacBook Air

  Yes! AirPlay with an AppleTV is the easiest to use and less complicated solution.

  SD / HD makes no difference.

  You will only be able to enjoy the full quality of an HD movie with a better projector however. This model projector is not really intended for presentation of home theater. It will work well. As you can imagine that there is no upper limit on the amount, you can overlook these things, but $2000 is going to buy a nice home theater projector these days. A few years ago, you would need to spend $ 50,000 or more.

  Would be there is always a problem to play these movies 'protected' outside the computer itself?

  No, not if you bought (or leased) from iTunes. They have to play on any device compatible iTunes. You can even use AirPlay to distribute it to your AppleTV from an iPhone.

  Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port?

  Yes.

  Can I use a patch to connect the VGA cable to the port on the computer to the projector?

  Not without a converter. Avoid using the VGA if possible. It's a terribly outdated and generally horrible alternative to any digital standard. Since your MBA has a port Thunderbolt, and if your projector has a HDMI input, buy a cheap (± $10) Thunderbolt to HDMI adapter cable. But AirPlay is preferable to a wired connection.

• A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

  Yes.

  http://www.Apple.com/Mac-mini/specs/

  the voltage may vary from 100-240 V AC.

• can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

  can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

  Yes. The only problem that I see if Macs were different countries. The method of payment in the account/ID must be associated with the country where the unit is located and you can only buy Apps from the store of the country where the computers are located

• Can I use data value references with a functional overall?

  Can I use data value references with a functional global?  I am trying, but it causes problems:  I run the attached VI with "new DVR" selected.  Then I run it again with "return array" and I get the error 1556: "The reference is invalid. This error might occur because the reference has been deleted."  It seems to have forgotten the DVR, but I thought it should be stored in the shift register.
  
  Another odd thing:  In my VI, if I try to connect the wire shown in "something strange", then the type changes (from U16 array to DBL), i.e. it doesn't recognize the type referenced by the DVR.
  
  I want to pass a very large 4-dimensional array between parallel loops with a functional global.  To avoid memory problems, I want to use a DVR and in-place element structures.  If that's not allowed in Labview, I will try passing it through a user event or notifier.  Any problems with those alternatives?
  
  Thanks.
  

  I received a response from an engineer applications OR on this subject, and it seems that it is perhaps a problem with Labview.  They are working on it, so I'll go ahead and close this discussion.

  Thanks for the help,

  Allan

• Can I use internet in Holland with a rt surface that I bought at the Portugal?

  Can I use internet in Holland with a rt surface that I bought at the Portugal?

  From Internet Explorer

  Original title: rt of surface

  Hi pmeulendijks,
  The answer is Yes. It depends on your networks.

  Thank you

• Can I use photoshop elements on my desktop and my laptop with a license?

  Can I use photoshop elements on my desktop and my laptop with a license?

  Yes, as long as you don't use it on one at a time.

• can I used pc deskjet as pc home network

  can I used pc deskjet as pc home network

  In the future, if it please read this post and then provide details.  What printer model? What operating systems? Have you implemented an existing network?

  In what follows I'll assume that you have the Deskjet 1000 j110a and you currently have a home network set in place.  I'll assume that the computer is connected to an XP machine and you have configured and enabled for sharing. (Search for 'Printer Sharing', in respect of assistance on XP to see how to proceed if it is not installed).  Suppose to not the XP machine has a network name of ComputerName and the printer is shared as printername.  In the following discussion, change the names to match your computer and printer share names.

  Now, on the other machine to install printer drivers, as if the printer is connected directly.  When it gets to the part asking you to connect the printer say you'll do it later.  (For the following that I will assume, the second computer is Windows 7.) On the Windows 7 computer, go devices and printers folder, add a printer, the local printer, creating a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update and then select Hewlett-Packard for the manufacturer then the Deskjet 1000 j110a for the printer.

• Can I use VMware vSphere Hypervisor™ with vSphere Client?

  It's the question next poped upward.

  -Can I freely use for my business need VMware vSphere Hypervisor™, and what will be the difference with VMware vSphere Starter Kit?

  and

  -Can I use VMware vSphere Hypervisor™ with vSphere Client software for free?

  Yes - it is freely permitted, but he he has limits and lack of features compared to the vSphere Essentials kits. Another thing to note is the absence of vCenter Server to manage multiple ESXi hypervisors with the free version. The backup API are, in my opinion, one of the main obstacles to the use of this.