DeskJet F4580: help! DeskJet F4580 no USB cable wireless configuration!

Similar Questions

• HELP: DSC-HX9V lost USB cable

  Seems we lost the USB cable for our HX9V camera and cannot charge the battery.

  I need to get a new USB cable as soon as POSSIBLE and I was wondering what the correct type of USB to get, because there are darn many of them?

  BTW, Sony is crazy... they charge almost $20 shipped to buy a new.

  What I expect when I'm at Best Buy or similar store? Mini-B? Micro?

  Thanks in advance.

  The original poster questioned another cable - using a single to connect the camera to the PC (for the transfer of the image) and the battery in the camera. This cable is a USB key, from what I can tell, a connector SONY owner (ugh!). You can find these cables on Amazon or eBay, if you do a search for "HX9V USB cable. They should cost less than $ 10.

  The second poster is pointing out another cable, is used to display images on a TV.

• Can I use a deskjet 2545 with usb and wireless

  I have a computer laptop w / wireless and your desktop w/o - How do I use a deskjet 2545 with two computers?

  Hello

  You would add probably twice, a printer each having its own profile.

  This is how works office.

  If in doubt please ask.

• DeskJet 3512 simultaneous usb and wireless?

  I have summer/am hoping to be able to set up so that my wife could print 'Wireless' so that I could maintain the ability to print from my desktop. Now, I see that I must "move" backwards?

  Is there a way that it can be placed on my desktop USB while allowing it to print from the laptop, whenever she needs?

  Hope that makes sense has failed to find anything while I was searching for this problem... ?

  Thank you!

  Connect your via USB, install the printer.  connect wirelessly to the woman, the printer and wireless.  Should work just fine.

• Problems when printing with USB or wireless - offline message

  Hello world

  I use a HP ENVY 4500 with a laptop Acer Aspire laptop and a desktop computer HP Pavilion 500, both with an Intel i7 and Windows 8.1. Initially, I configured the printer to work with both PCs wireless. The wireless network is provided by the modem of my provider (Telenet), so it is not very strong I increased it with Devolo powerline adapters. Print is fine, only when I want to print more pages then 3 print job is stopped in the middle of page 4. I get a message that the printer could not print the document, and the page comes out half print. I connected my printer with a USB cable and configured to work with USB, but also wireless. But that Don t always works, today, I tried to print a document from Mozilla Firefox and it would not start. The printer can be used on both sides without choosing the connection?  Also I get the message that the printer is offline and cannot print the document, even if it's actually printing.

  When I open the doctor print & scanning everything seems to be ok wth the printer, no defects are detected. Wrong me?

  Hello @DenOuwe and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you run into connectivity errors.  I would like to help.

  I would recommend using this thread on missing/partial prints & printer offline on Windows 8/8.1. by @JERENDS

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• HP Deskjet 3515: Connection HP Deskjet 3515 to the network without USB cable

  Nice day

  I just changed networks and the need to install my HP Deskjet 3515 to the new network but I can't find my USB cable.

  Is - it possible configure the printer on my new network without USB cable?

  Thank you

  GatZza

  Hello @GatZza,

  Welcome to the HP support forums.

  I appreciate that you try to put your Deskjet 3515 on your network wireless without router.

  I would like to help.

  I got the following information from the Printers manual.

  To get started with Direct wireless printing

  1. to use live wireless, you must turn on Direct Wireless Control Panel and get the wireless
  Direct name and password if you have directly on wireless security:
  a. on the home screen, tap on wireless and then select settings.
  b. If the display shows that the wireless is turned off, select live wireless, then on (No.
  Security) or we (with security).

  NOTE: HP recommends that you turn on Direct wireless security. If you turn on safety, only
  users with the password will be able to connect wirelessly to the printer. If you disable security,
  anyone with a Wi - Fi device to the printer WiFi range will be able to connect to the printer.

  c. Select the display name to display the name Direct wireless.
  d. Select Show password to display the password Direct wireless if you live wireless
  Security on.

  2 from your computer wireless or mobile device, Wireless Tower, find and connect wirelessly
  Direct name, for example: 3510 HP-Print-XX-Deskjet series. If you have Direct wireless security, enter
  Direct wireless password when you are prompted. Then print as you normally would from your computer or mobile
  device.

  Open the integrated via Direct wireless Web server

  1. from the home screen, press the wireless button, and then select settings.

  2. If the display shows that the wireless is turned off, select live wireless, then on (No Security) or
  On (with security).

  3. from your computer wireless turn wireless on, to search and connect on behalf of live wireless, for
  example: series HP-Print-XX-Deskjet 3510. If you have Direct wireless security, enter in the wireless
  Direct password when you are prompted.

  4. in a browser supported on your computer, type the following address: http://192.168.223.1.

  When you reach the EWS printers, you should see an option to run the Wireless Setup Wizard.

  Run the wizard, and then follow the prompts.

• installation a hp deskjet f4480, when I plug in the usb cable, my computer cannot find the printer.

  I have an hp computer, product number NY545AA #ABA, with windows 7, 64-bit and a hp deskjet F4480 printer. During the installation of the printer, I get to the screen that you can plug USB cord say printers and after about 2 minutes. It says no device found. The USB cord is plugged into the printer and the computer, the printer is on. Finally, I have checked, add a device later. I fight the computer and printer together, about 3 years, the printer never worked. I have downloaded new software and the HP driver for my printer, 1 week ago, it did not help.

  Try to use the other USB cable

• DeskJet 1010: Printer lacks USB cable out of box

  What says the subject; Miss me the printer USB cable right out of the box. I have found nowhere on this site to report such a question, so if someone could send me to where I had to go or be able to directly help me that would be much appreciated!

  For more details, I bought the printer at a local Walmart but have moved since then and am unable to go back there, so I am looking for HP itself.

  Hello

  No, no USB cable in the box, it is clear in the box. You buy you USB cable. He also says

  "USB cables are available from any reputable dealer." that means you have to buy yourself

  http://support.HP.com/us-en/document/c03742903

  Kind regards.

• Cannot install HP Deskjet 3050 a using USB or wireless.

  I tried to install a printer HP Deskjet 3050 a on my computer recently.

  After inserting the CD her usually install page appears. When I choose to install the printer through the USB port, the program continues normally until it beginning to insert the USB cable.

  Having said the computer software does not meet attaching me the USB cable, just on the same window.

  When you try to install the computer over the network, it starts to check the network environment and will then pass the same window as before, indicating that I need to insert the USB cable.

  My USB ports work correctly, but the computer address to find the printer.

  I have a Dell Inspron 530 with Windows Vista Home Premium 32-bit.

  Hi Silvuss,

  I would suspect im a defective USB causes such behavior, such as cable used to direct connect also although it is used to establish the wireless connection.

  Please make sure that the USB port was not plugged launcing before installation, enter the control panel > printers and ensure there is no Deskjet 3050 a icon exists. If there is such a, delete it by clicking on the icon, and restart the PC, then try following the installation again.

  In addition, make sure that the USB port is not longer than 2 - 3 m long, directly plugged on the ports of the PC and not through USB hub or extension that will reduce its power.

  I also suggest that you try another cable and see if that can help you.

  A last suggestion, make sure that the CD and Printers lists the exact model as it must contain eighter HP Deskjet 3050 has or J611, make sure that there is no difference that its previous model have a similar name (Deskjet 3050 J610).

  Hope that helps,

  Shlomi

• Deskjet 3050 a problem change from USB to wireless

  I got a Deskjet 3050 a printer attached via the USB port of my desktop HP Win7 64 bit for a year and a half. Attempts to convert the USB wireless. Instructions lead me the start--> all programs--> HP--> HP Deskjet 3050 J611 series a--> convert USB wireless.

  But when I open--> series HP Deskjet 3050 a J611, my only choice is:

  Connect a new printer or

  Add new software

  Nothing on the conversion of wireless USB. If I click 'connect a new printer' I have the choice of:

  USB connection

  Connection Ethernet / wireless

  Connect again later

  If I select wireless connection, it tells me to connect the USB cable. It is been connected for more than a year. But the button "Next" is gray and I can't move forward.

  If I select USB connection, it tells me to connect the USB cable. It is been connected for a year. The only choices I have are to return to a screen or check a box that says I'll connect it later, not now. I don't have to check but the 'Skip' button is gray and so I'm stuck again. I tried to turn the printer power off and moving the USB cable to the USB port of different desktop and power on printer again. I tried to reset the default printer on the printer control panel. The software does not believe that the USB is connected. This is the case.

  I pressed the button on the control panel of the printer wireless. It flashes blue.

  I'm usually pretty good with the resolution of this kind of thing, but I'm ready to break this piece of scrap on the ground and dance on his grave. .. .any help would be appreciated. Thank you!

  Hi Julie,.

  Thanks for the reply, sorry for the frustration. Here's what to do to uninstall it, in a more detailed form.

  • Click on the link above to access the driver removal tool.
  • Click on download and run.
  • Click 'Yes' when asked if you want to allow the following program to make changes to the computer.
  • A folder opens, look down and you'll see 'uninstall_l3' - select it.
  • The uninstall is running and restarts your computer.

  Now, it is normal to go forward, and then reinstall the printer.

  I hope this helps you, let me know how it goes!

• Help, please. Not detected HP Desktop F4500 wireless printer same w/a usb cable

  My wireless printer has a mind of its own. When I got it, it printed... wireless. My router freaked out & did not work, so I unplugged my router & used my dsl cable to my laptop to connect. I tried to plug the usb cable from my printer to my laptop so I can use it & it didn't work. I brought my printer at the show & restarted my laptop... it worked w / the USB for a day. I got a new router and now my printer is not working yet. RAWR! Help, please. I don't know what to do. It is not work w / or w/o a cable. I've restarted both, but nothing. Thank you all ;-D

  Unplug the USB cable from the laptop, then remove the icons of printer to the printer from your laptop too. Now click on the Menu start > all programs > HP > HP Deskjet F4500 > add a device. Now follow the instructions to reconfigure the printer to connect to your new network. You must connect the USB cable between the laptop and printer ONLY when you are prompted to do so and not before it.

• DeskJet 3511 change from usb to wireless

  I'm moving my printer all-in-one Deskjet 3511 of wireless USB to one. I use on my Mac OS X Mavericks and the access point for my network is an AirPort Express Terminal, if that makes a difference. I tried to use the Setup Wizard, the application of configuration easy wireless, etc and nothing has worked yet. I don't know if I have previously configured something I forgot and need to reset the printer to factory settings or if there is something other that I'm missing (which is not unlikely).

  Hi kitkatkaiti,

  I understand that you cannot set up the printer on the wireless network. I can help you today.

  Print a configuration page to see if it provides the SSID or the IP address of the printer.

  Printing a Network Setup Page.

  You can restore the default settings of network on the printer.

  Go to the configuration, the wireless menu, select restore defaults, Yes.

  First, check the encryption and password for the network.

  To check the encryption type:
  In the Apple menu, click on Go, selection of applications, utilities, Keychain Access, on the left side, click on passwords, double-click the name of the network, check the show the password box, type your Mac password to see.

  To check the network password:
  In the Apple menu, click on Go, selection of applications, utilities, Keychain Access, on the left side, click on passwords, double-click the name of the network, check the show the password box, type your Mac password to see.

  Try the printer configuration using this method:

  Turn it on wireless Direct.

  Go to the configuration menu wireless, direct and turn it on.

  Go to the airport and connect to the network printer.

  Then, type 192.168.223.1 in the address bar of Safari.
  It will load: the printer server Web part, click the network tab, select Setup wireless on the left.

  Fill in all your information. Apply the settings.

  Reconnect your network name.

  Then add the printer on the Mac, because the software is already installed.

  Click on the Apple menu and then click on System Preferences.
  Scanners & printers, then click the plus sign +.

  Select the printer in the list. (Make sure that the printer is listed beside the use: displays the name of the correct printer and not Airprint) Click the Add button. (you may need to click the drop down menu to select your printer)

  Test the printer.

  Let me know how make you out.

  Good day!
  Thank you.

• my iphone 5 c opens more after that I was invited to be updated with itunes. now, the display shows only itunes usb cable and logo. read some tips here, but nothing happened. any help will be much appreciated.

  My iPhone 5 c opens more after that I was invited to be updated with iTunes. now the display shows iTunes logo and the USB cable. I have read and applied some tips here, but nothing happened. Any help will be much appreciated. Thank you.

  https://discussions.Apple.com/message/30014877#30014877http ://

  Read the post from sierrawren . It helped me to fix my phone. Now it works perfectly fine. Hope it can help others too.

• HP ENVY 4500 e - all - in - a principle: HELP! Can I use firewire-USB cable to connect the HP Envy 4500 for MacBook Pro?

  Help, please!

  I just bought a FANCY 4500 e-all-in-one printer for use with my MacBook Pro (OSX 10.7.5) during a trip. I use WiFi in the hotel.

  I tried to connect printer and wireless laptop. It is not the case. Printer connects to the network. Mac connects to the network. The 4500 just want stands as a device when it is time to choose a printer.

  I read all the posts proposed, searched the forum looked at HP printer support. I can't find any solution for when this message appears:

  «ATTENTION more than an access point/router wireless was found which corresponds to your wireless network (SSID) name.» If this is not intended, your HP printer can connect to wireless wrong. To avoid this problem, change the name of your wireless network (SSID) to be unique.

  "If you change the name of your network, you need to configure the SSID on all wireless devices to match your new network SSID".

  I guess I can't rename the network name of the hotel's wireless, so I'm ready to go on the road to cable. Envy has a firewire port. My MacBook has just USB.

  ==> Se connect want 4500 and Mac via a USB-to-Firewire my best cable option to print while I'm in the hotel?

  ==> Or there, does anyone know a work around?

  Thank you very much for your help!

  Thank you very much for your answer.

  Ah, Yes. The old Grasshopper see that it is just another form - Type B - USB port on the printer than on his laptop computer.

  Why would I want to connect via WiFi to the hotel? Obviously because I was not think properly.

  Thank you for your patience and response.

  I click resolved when I print from my laptop.

  First of all, he is out to buy a USB cable.

• Hello, how can I find the best internet connections for my windows seven? I use my cell phone internet phone with a usb cable.is there any software from microsoft to help me?

  Hello, how can I find the best internet connections for my windows seven? I use my cell phone internet phone with a usb cable.is there any software from microsoft to help me?

  Hello

  The fastest internet connection depends on your internet speed provided by her Internet (ISP) Service provider. Therefore, contact them to receive a best speed of the internet.

  For more information:

  How to increase the speed of navigation: 7 ways to work faster on slow connections

  http://www.Microsoft.com/atwork/remotely/connections.aspx#fBid=TN-_TCHYDMB

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=1vrPRuhAhAg

  Internet Explorer is slow? 5 things to try

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  It will be useful.