HP LaserJet M1120n MFP, Win7 64 bit, LAN

Similar Questions

• Horizontal stripes LaserJet M1120n MFP

  When I print with my HP LaserJet M1120n MFP, I get the scratches on my document, sometimes, you can also see a part of the document in the stripes (in this case, text).

  A that someone already had this problem?

  Best regards, Thomas

  

  Hi Thomas,

  Usually the problem you are having is caused by 1 of 2 things.

  1 - a toner cartridge leaking / defective.

  or

  2 - a unit of the wrong fuser.

  What I saw in the past with backgrounded text as it is done for you, is that it is generally a fuser unit.

  A way to test this is a test to halfway. Do it just to send a print job to the printer, wait until the document looks like it is in the middle of the machine (mainly on the toner cartridge) and then open the door. If you notice these lines before he gets to the fuser unit (which is at the back of the machine) then it will be your toner. If your document is always clean after the toner is suppressed, then it will be the fusion Assembly

• Cannot set up XP for Laserjet 4050 of Win7 64 bit

  I have correctly installed and shared my HP Laserjet 4050 (no suffix) on a Win7 Pro 64-bit computer. But on other XP 32 bit on the same local network, I am able to see the printer, but I can't install the drivers no matter what.

  I downloaded the latest drivers PCL5 (I also tried PCL6) and universal drivers. But when I add a printer under XP it says it will automatically install the drivers for the Win7 machine but she then said that the Win7 machine doesn't have the correct drivers and asks me to choose a local directory. When I go into the directory PCL5 and select hpbf001i.inf, I get the error message "Windows cannot locate a suitable printer driver.

  I did it several times without success. \

  Help, please.

  It shouldn't look that I tried on my system and both were working, but I would recommend using the "------" instead of "/ /" to access resources on the local network.  What happens if no anti-virus or firewall do you have on the XP box?

• where can I find a driver for the laserjet m1120n under win 7-64 bit print network?

  HP LaserJet M1120n MFP, CC459A, Windows 7 64 - bi t. No network printing since I have new laptop with Win 7 64 bit. I'm going to change printer too?

  OK, well, maybe there are even more options.  Not sure it will work, but try:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• HP LaserJet M1132 MFP prints not a remote desktop

  Hello

  I have a MFP HP LaserJet M1132 (number of product CE847A) connected to a PC (MS Windows XP Home Edition + SP3) via the USB port. There is no problem with the printer. However, when using Remote Desktop connection (it is set to use the resources and local facilities, or in my case, printers and ports series) on the server (MS Windows Server 2008 R2), I can't even print a test of a remote office page.

  Error message: "print a test page failed. You want to display a tool to solve printing problems to get help? »

  But it does not anywhere as planned is access to the internet, and I've not had a MS Windows Server 2008 R2.
  The same error is for the HP LaserJet M1120n MFP.

  On my PC I installed another printer - old OKI ML321 (needle) connected to a PC using LPT cable and network printer Konica Minolta 1690MF (in another room). In two of these printers can easily print a test of a remote office page.

  Please help me.

  Thank you for your interest.
  The situation is a little different from the image. Windows Server 2008 R2 is available across the WAN. LAN is connected to the PC-1, 2 - PC and printer Konica Minolta. HP LaserJet M1120n MFP is connected through the USB port of the PC-1. OKI ML 3320 printer is connected via LPT also to the PC-1. PC - 1 has access to Konica Minolta printer via the local network. PC - 2 also has access to Konica Minolta printer via the local network. PC - 2 is also available for PC-1 HP and OKI.

  It seems to me that I found the explanation for printing problems - some of 'my' printers are simply not compatible with Windows Server 2008 R2. I found on the net the following information:

  http://www.windowsservercatalog.com/item.aspx?idItem=cdde267a-800D-2d9f-1f0c-225cabd6838e&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=31df9819-ca52-4684-dc3b-8e31b70c77d7&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=6475235d-8DBB-9e95-11dc-3575d569acc2&bCatID=1282
  http://www.windowsservercatalog.com/item.aspx?idItem=59731747-9976-8D51-DCBB-7664cbc17a89&bCatID=1282

  I think I can close the topic.

  (translated from Polish into English using Google translator)

• Cannot install driver for printer HP LJ M1120n MFP HP 6570b laptop with win7 64 bit

  Installation driver Plug & Play doesn't work - it can not find the proper drivers.

  If I try to install the latest HP driver for win7 64 bit (from the HP site), it stops during the instalation (windows program stops due to unknown issues).

  If I try to install the 32-bit version of the driver complete Solution from HP site, it let me to the HP install window. By clicking on the "Install" button, it stops saying "Setup is not supported on this operating system, or the system does not meet the minimum requirements...". »

  printer: HP LJ M1120n MFP

  laptop: HP 6570b

  OS: windows 7 64-bit, selected, automatic driver update drivers on board cooler

  What to do next?

  I found no error in the event viewer, at least not a red icon.

  But I find the solution - in another forum thread. Here.

  1. I have connected the printer to get the error message,

  2. then downloaded and UNPACKED (no) LJM1120-COMPLETE-Solution driver installed (32-bit) here.

  3 went to Device Manager, find the printer,

  4. right click to get the link submenu "Update driver."

  5 choose the unzipped directory driver and let it update driver from there.

  Printer solved.

  Then did the same thing to scan, points 3 to 5.

• HP Color LaserJet CM1015 MFP: LaserJet CM1015 scanner does not work in Windows 10 (64-bit)

  I up graded to Windows (64-bit) 10 now the scanner on my HP Color LaserJet CM1015 MFP does not. I installed HP Universal print drivers, but apparently there is no include scanner drivers. Anyone know where I can get the drivers scanner?

  Thank you

  N ° 7

  Hi Lou,

  Basic scanning drivers built into the operating system only allow scan however a USB key.

  You can follow these steps to install the previous HP software by using compatibility mode:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c03506225

  Vista drivers can be obtained directly from the following link:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=1846081&swItemId=ly_51851_1&swEnvOid=2100

• LaserJet 2055dn guard re - install (and fault) on Win7 32 bit

  Hi there, we have a certain Laserjet 2055dn office configured to print via a USB connection to a docking of the user (and thus their laptops). They also 2055dn at home too, which they plug it into their laptop again via the USB port.

  We recently migrated 3 users of XP to Win7 32-bit as a pilot and as such, we need get their impression also works.

  On the first machine, I used the HP Universal Print Driver PCL6 (5.4.0) version on the HP site - everything went well until when we went from the printer and turn it back on again - he then tried to install the printer all over again and then failed. We then tried the P2050 (61.093.02.77) Series PCL6 driver from the main site and yet once again, everything looked ok until the user called to say when she went home and plugged his 2055 in, he again tried to re - install the printer and a not rather than using the print object existing only.

  I checked and when the printed object is created, it's going to USB001, and as I said, it's all ok until you plug the printer back in?

  If anyone has noticed this problem, or similar? I wonder if force us users to always use the same USB port on the laptop if it would help? I note that when the printer is found, it also seems to show an integrated HP Web server (or along those lines) print USB driver and try to find the drivers for it too much.

  Any advice or suggestions is very welcomed,

  Thanks for looking, Steve S.

  Hi sansini,

  It is a product of the profit margin. For the best answer to your questions, you need to transfer your question at the following links.

  http://h30499.www3.HP.com/T5/business-support-forums/CT-p/business-support

  http://h30499.www3.HP.com/T5/printers-LaserJet/BD-p/BSC-413

• HP Laserjet M1319F MFP is not able to scan under Windows 7 (64-bit at home)

  I have a Windows 7 Home Premium 64 - bit HP Pavilion connected to the HP Laserjet M1319F MFP. All the functions of the printer worked so far.

  The scan function has stopped working. Here are the steps and errors that I see:
  1. I load the sheet from which I scanned in the printer and the printer displays
  2. I start Windows Fax and Scan dialog box and press the button new scanning
  3. New Scan, dialog and I press the Scan button
  4. the printer begins to feed the sheet and displays
  5. immediately after the message that the printer displays the message
  6. a message with the dialog box titled error, and after I press OK another dialog box with Windows Fax and Scan title pop-up.
  I did the following steps to try to fix the scan:
  1 uninstalled the printer and it added. Scan still does not work.
  2. I downloaded the latest driver and firmware on HP site updates and installed on the PC and on the printer firmware. I had success on the driver and firmware of the facilities. Scan still does not work.
  3. I ran PC-Doctor hardware diagnostics on the printing device and got a status of success. The Test page printed successfully.
  4. I am able to print documents, but will not scan. I tried both ways - single and multiple - sheets. Scan still does not work.
  Any suggestion would be appreciated.

  Hi ApolloWZ,

  Thanks for your quick response.

  In the meantime, I found the solution to my problem, so I thought I'd share it here for others.

  I found the answer here:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/can-t-scan-from-M1536dnf-after-reformatting-computers/TD-p/3914820

  I will cut & paste the answer below, in which case the link above doesn't work at some point:

  (1) on the computer target under the normal user account, press Start, in the search box type services.msc. Right click on the program that appears and select "Run as Administrator". Enter your user password or click on next to go to the UAC popup, if necessary.
  (2) locate the service called "Windows Image Acquisition (WIA)" and double-click it.
  3) click the connection tab, and then change this service to log on under a Local System account. Click here to allow the service to interact with desktop. And then click OK.
  (4) reboot (or if you really don't want to restart & know what you're doing, you can just stop & restart the WIA service twice)

  See you soon,.

  Gary.

• HP LaserJet 1320 will not print duplex on Win7 64 bit

  HP LaserJet 1320 is duplex printing is no longer. using Win7 64 bit system. I have used this printer for several years and it has worked flawlessly. Just installed Win 7 64 bit machine, has made the windows update in the choice to install printer, selected the "print on both sides" in the printer preferences. The book is re - feeds like it going to print on the other side, but a new sheet out and 2nd page prints on the 2nd feed and he re - feeds also as if printing on both sides. This used to work fine under Win XP

  Hello

  Please try to install a replacement driver to work around the problem and inform me of any changes:

  1. Run the installation of the following universal print driver:
     http://ftp.HP.com/pub/softlib/software12/COL40842/DS-99374-2/UPD-PCL6-x64-5.4.0.11744.exe
  2. Select the traditional installation mode.
  3. Set the port as LPT1 and follow the steps to complete the install wizard.
  4. Once the compelting the installation, you will notice a new icon of the listed all-in asHP Universal Print driver.
  5. Right click over the icon of LJ 1320 existing, click printer properties, enter in the Ports tab, note the port and close the window.
  6. Right-click on the universal print driver, click printer properties. Enter in the Ports tab and check the same port that you used in the original pilot.
  7. Enter in the device settings tab and verify that the unit of the duplex unit is installed.

  Now try pritner duplex using the universal print driver work.

  Please let me know if this is useful,

  Shlomi

• Cannot install the printer drivers for HP LaserJet m1120 MFP on win7 x 64

  Official and the correct version of the driver is downloaded from the HP suppot.

  Installation starts correctly, but in step 'copy files on the hard drive... ". "it's freezing.

  I use SSD kingston sv300s37a / 60g. Maybe the problem in my DART player?

  Stop the antivirus did not help.

  In the driver installation connects to the directory root, some very interesting things.

  Installation copy the drivers sort of recursively, creating tons of files that inside each with the full package of driver files...

  Here's the part of it.

  [18/01/2014 10:09:57:791] - LOG (1520): CopyFilterFiles (*. *, C:\Program Files (x 86) \HP\HP LaserJet M1120 MFP Series\\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\English, C:\Program Files (x 86) \HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120) MFP LaserJet M1120 MFP Series\English HP\HP Series\)
  [18/01/2014 10:09:57:800] - LOG (1520): copy of the file C:\Program Files (x 86) \HP\HP LaserJet M1120 MFP Series\\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\English\driver.cab to C:\Program Files (x 86) \HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP LaserJet M1120 MFP LaserJet M1120 MFP Series\English\driver.cab Series\HP\HP Series\HP\HP
  [18/01/2014 10:09:57:811] - LOG (1520): CopyFilterFiles (*. *, C:\Program Files (x 86) \HP\HP LaserJet M1120 MFP Series\\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP, C:\Program Files (x 86) \HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120) MFP LaserJet M1120 MFP Series\HP HP\HP Series\)
  [18/01/2014 10:09:57:820] - LOG (1520): CopyFilterFiles (*. *, C:\Program Files (x 86) \HP\HP LaserJet M1120 MFP Series\\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series, C:\Program Files (x 86) \HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP Series\HP\HP LaserJet M1120 MFP) Series\HP\ HP LaserJet M1120 MFP LaserJet M1120 MFP LaserJet M1120 MFP Series\HP\HP Series\HP\HP series)...

  Solved.

  The solution is here.

• HP LaserJet M1132 MFP: HP M1132 multifunction printer could not print from TS Win2008 (Remote Desktop), is that M1132 is based on the host system

  The logged-on user OS Win7 64 bit with M1132 MFP (usb). We have TS server with Win2008 64-bit OS installed. User to connect TS and runing application, then try printing with printer M1132 redirected pages, but nothing happened.

  We found the article below that explain the system based on host could not use remote desktop. M1132 does not appear (he has provied the hots-based driver for the printer).

  http://h20565.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c00605333&lang=en&cc=us#N10078

  is there someone can let me know, this printer can be used for remote desktop or not? Thank you.

  Hello

  The HP Laserjet Pro M1132 is based on host printer indeed and consequences it only is not supported on Citrix / Terminal Services / RDP.

  You can find the specifications below:

  Standard printer languages: host-based

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA0-4644eee.PDF

  Also the following document list the LaserJet Pro M1130/M1210 MFP series ' ' as not supported include:

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=4AA0-8465ENW

  Kind regards

  Shlomi

• Win7 64 bit drivers Satellite U300?

  Have a U300 that was installed with Win7 64-bit, could someone provide me with information about 64-bit audio drivers and other drivers for Win7 64 bit?, or what I need to get down to 32 bit Win7?

  Hello

  No, you don't need to go back to the 32-bit system n.
  The drivers can be researched at your own hand.

  For example the tool as VAP (value added package), utility support of flash memory card are not related to a specific model laptop and can be downloaded from other series of laptop.
  LAN driver, touchpad and similar pilot can be also downloaded from the driver page.

  In addition, here you can find the portal WiFi and BT which contains the drivers:
  http://APS2.toshiba-tro.de/Bluetooth/
  http://APS2.toshiba-tro.de/WLAN/

• Problems with the LaserJet M1217nfw MFP - resolution of the Scanner and ADF feeding issues

  Feature: LaserJet M1217nfw MFP

  Connection: Ethernet

  OS: Windows 7 Pro 64-bit

  1st problem: using the TWAIN software, I am unable to change the resolution of the documents I'm scanning. It displays only the 300 and the menu drop-down does not offer any other parameters. It is having to make each document that I scan a lot more big that it must be, and the company I'm downloading of complained them of the overused storage space.  Device MUST be based on the network for the office.

  2nd problem: the ADF is VERY picky. If the paper is inserted at the stop, it will not pick up and will keep scanning out of the original glass. I usually have 2 or 3 times to find the "sweet spot" where it will actually be a new Pick-up analysis.

  I must say, I was very happy with this product when we got it first, the web interface with the drivers loaded on the printer was a great feature and the installation for each machine went very smooth. However, lately this device became more complicated than a time saver.

  Hi SilentbobSC,

  Follow the steps below.

  1. click on settings

  2. remove the checkmark of "Display the dialogue from TWAIN to allow cropping and low sweep"

  3. click on the drop down arrow to adjust your ppp settings

  

• HP Laserjet M1132 MFP is too slow on the network!

  Hello

  My HP Laserjet M1132 MFP is too slow on the network!

  I connect the printer to the windows XP 32 bits SP3 using UBS port. The printer works fine on the local computer, but when he shared on the network running too slow, for example with the print test page it takes about 45 seconds to print and other documents, it takes much longer.

  I installed the last form HP driver site and update the firmware it the latest version.

  It happens on other Windows XP machines as well.

  I have connected the printer to my laptop (Windows 7 64-bit) and it works very well (no delay on the network) and it seems that this problem have some relationship with the windows XP Driver.

  I used the trick of local port on computers remote (instead of the normal method) like this:

  "add a local printer.
  "new port".
  "localport".
  \\XPcomputer\HPPrinterName port name

  but still nothing!

  There is nothing wrong with the network, allows us to use a Samsung printer on the same machines on the network without problem.

  I really appreciate your HELP!

  It seems that no one on the planet has the answer to this question!

  The only available option is to upgrade your operating system to windows 7 (vista can work, I have no idea!).

  He wat the only solution for me.