Error message when you try to print

Similar Questions

• error message when you try to print from the windows photo gallery

  I can't print the Windows Photo Gallery photos: failure of the Document to print - load plain paper.  I reloaded paper, updated printer drivers and called Dell technical support, who said it was a software isue since I can print other documents as well as photos from Photoshop Elements. I get the same message when I try to print from painting and the image viewer. Looks like a problem of microsoft.
  My printer is Dell V515w and is 4 months old.
  Even if I can use Photoshop Elements, it is easier to use the Windows Photo Gallery.  Any ideas?
  Thank you
  Richn13

  Hello
  See this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-print-only-one-page-in-a-multiple-page/737b4afc-0D0E-4cb8-8374-f6de218720b2

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/trouble-printing-from-Windows-Photo-Gallery/456cc8bf-9791-4619-82e2-de121deec9d3

  Let us know if it helps.

• Re: Error Message When you try to print to a network printer

  I just bought the new laptop, and when I try to print to a network printer (one that I always printed at front), I get a message: "The Active Directory Domain Services is currently unavailable" - I can't add a network printer at all! Help!

  Is there a setting I need to change to be able to add network printers?

  I think you should contact your local administrator and let him install this network printer. He knows how to install the correct driver and how to find the location of the printer.

• Print the error message when you try to print from a Vista network printer

  I have 2 computers and 1 printer. Usually, when I wanted to print computers I unplug the cable to a computer printer and plug it into the other computer. Now, I use a USB switch with computers and a printer plugged into it so I won't have to unplug the cable from a computer and move it to another. The problem is that I get the constant pop-up message that says "Windows - writeback failed. Window could not save all the data for the E:\$mft. The data has been lost.

  What should I do to fix this?

  Thanks in advance,

  Hi Hydnah45,

  ·         When exactly do you get this error?

  ·         You have windows XP INSTALLED on your computer?

  Try these steps if you have windows XP INSTALLED on your computer.

  Step 1

  To resolve this problem, first check whether the feature 'Turn on disk write caching' is lit. If it is enabled, disable it. To do this, follow these steps.

  To disableActivate the disk write cache, follow these steps:

  1. click onStartand then click my computer.

  2. right click on the hard drive, and then clickProperties.

  3. click on thehardware tab.

  4. Click to select the hard drive, and then clickProperties.

  5. click on thepolicies tab.

  6 clear the boxenable the disk write cache , and then click OK.

  7. clickOK to close the disk Local (c) properties dialog box.

  8. Repeat steps 3 through 5 for each hard disk that is installed on your computer

  Step 2

  Make changes in the registry

  1. start the registry editor.

  2. Locate and then click theenablesecuritysignature under the following key value in the registry:

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Lanmanserver\Parameters

  3. on theEdit menu, click modify.

  4. in thedata value: box, type 0, and then click OK.

  5. exit the registry editor.

  6. stop and restart the service server,or restart the computer

  Important: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows

  If you have windows 7 installed on your computer try running printer utility.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  I hope this works.

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message when you try to print a P.C. LR 2.5. . .

  I don't really know why I get this error message - it reads like this:

  
  

  There is a (or however many there are) image in this print job that is not valid.  She may have been saved in an unsupported file format.  You will not be able to print this image.

  
  

  
  

  But the images were saved in LIGHTROOM!

  
  

  Here's what I did:
  (1) I shoot in RAW - download my photos on LR

  (2) change them accordingly

  (3) export and create a jpg file - they are now re-numbered sequentially.

  (4) I will then import the newly exported jpg back in to LR so that when I create a piece of evidence for my clients names/numbers... that's when I get the above mentioned error message!

  
  

  Help!

  
  

  What I did and how can I fix?

  
  

  Thank you!!

  Could you post one of the offending files? Which could give us some tips. Certainly, you should really have no problem any reimport the jpg file exported from Lightroom and print, even if you have to really make sure that you have enabled "treat files next to raw as a separate photo files jpeg" in the Panel preferences to import, otherwise you could get in the disorders strange if you reimport the jpeg file with the same filename exactly as your RAW files.

  Finally, the last version of the LR is 2.6.1 update at that.

• color laserjet MFP M177: error message when you try to print

  Hello

  I have a HP Color laserjet MFP M177.  I can't print I get an error message on my computer screen. No messeage shows up on the printer.  I have recently upgraded to windows 10 (I do not know what version) If this could have something to do with it?

  Help, please

  Thank you

  Hi @Daisy001,

  Welcome to the Forums of HP Support! I see by your post that you can't print, since the upgrade to Windows 10. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  If you have not completely uninstall and reinstall the driver, I would say to start it there first. Here is the link to the latest drivers: Color_LJPro_MFP_M177_full - solution_15188.exe

  If the problem persists, you can download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Why I get these error messages when you try to print a pdf file?

  'This document could not be printed' and then, 'he is have not chosen to print pages.

  I've already printed these backup files.

  EDIT: now, I'm getting "the plugin cannot start the broker.

  What the hell is happening?

  Post edited by: Buckawicki

  All what I can say is that you try to upgrade to the latest version of Reader X with http://ardownload.adobe.com/pub/adobe/reader/win/10.x/10.1.5/misc/AdbeRdrUpd1015.msp

• Spooler subsystem app error message when you try to print. then my computer launches the printer offline

  I tried to delete all software, including drivers and then reinstall but have had absolutely no success. I should mention that I use a Lexmark printer and supposedly there are hidden drivers files that cannot be deleted. Any help would be appreciated

  Hello

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------

  Check with Lexmark Support and drivers

  Lexmark - Support
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US

  Lexmark - drivers
  http://support.Lexmark.com/index?page=home&locale=en&UserLocale=en_US&segment=download

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Get ink system failure-code-Oxc18a0201 error message when you try to print from C7180 printer

  Original title: C7180 printer all in one

  I'm unable to print I receive ink system failure-code-Oxc18a0201.

  HELP IF YOU CAN

  THANK YOU FOR YOUR TIME.

  Hello

  1. what operating system is installed on the computer?

  2. you use all-in-one printer, HP Photosmart C7180?

  3. were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link mentioned below if you have HP printers and see if it helps.

  Error Oxc18a0201 INK system failure C7180

  Hope this information helps.

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

  After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

  It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

  The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

• Error message when you try to download files - WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.

  Original title: C:\windows\system32\icacls.exe
  For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection.  Whenever I do; try to download something or download something, I get the following error:

  WINDOWS SECURITY, these files cannot be opened.  Your internet security settings prevented one or more files being opened.
  C:\windows\system32\icacls\exe

  I have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.

  Any suggestions?  I really need to download Trend Micro.

  Thank you
  Amy

  See the article below:

  ID of the KB Article: 2588679.

  Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened." http://support.Microsoft.com/kb/2588679

  Check the following settings:

  Right-click on the downloaded file. Select Properties.
  Click the Unlock button.

  Check the suggestions the following threads:
  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/these-files-cant-be-opened-your-Internet-Security/7bbe6bc9-d89f-4407-81fa-ea4c24b39aaf

  Let us know if that helps.

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO