DeskJet 3632: unable to set the printer for the moment of ink

Similar Questions

• HP Envy 7640: Unable to set the scanning resolution

  Have been unable to set the resolution of scan during the scanning of the glass in a computer file (pdf, jpg). Guide the user to the HP page 47 7640 said: "● If you want to adjust the size of the scan, output type, scan resolution, or file type and so on, start scan from the software of the printer."
  ● To avoid all scanned text wrong or missing, make sure that the brightness is set properly the
  software.
  ● If you want to scan a document with several pages in a single file instead of several files, run it
  Scanner with the software of the printer instead of the sweep of the screen of the printer".

  First of all, where is the "printer software" to start the scan?

  Have tried all this. When I opened the series HP Envy 7640 (network): Assistant of HP printer, I click on "Scan the Document or Photo a" place in the scanning area. No scan dialog box never opens. Actually I tried to reinstall the printer driver. No change. Always impossible to get a scan dialog box. In addition, when I go in the start menu and the title of the series 7600 HP: HP envy, I click on the HP Scan icon. After a long wait, a dialog box appears that says: "Cannot communicate with Scanner", and it offers a few options. The first is to activate the device (printer), and then on; the second, control cables (its wireless operation); the third: try the software "fix." Happy to report that after stopping then on and running assistant printer again, this time by pressing the "scan a Photo Document' results in the appearance of a dialog box to make the changes that I've been looking for.

• Unable to set the transparency of the taskbar to laptop with windows 7.

  Original title: Please read my problem and give a solution as soon as possible.

  HII all... I'm unable to set the transparency of a taskbar for laptop with windows7 operating system? He demonstrated a tab to find out "trouble shoot problem and sero effects transparency" and shortly after clicking the laptop turns on the screen several times...

  Hi Mary,

  We need additional information to help you with the problem of transparency, please answer the following.

  1. which antivirus app do you use?

  2. do you use wired or wireless Internet?

  3. What is the brand and model of the computer?

  If the graphics card and driver were installed after that Windows 7 was first set up, depending on the manufacturer, you may need to update the computer performance index, which will automatically enable Aero. I suggest update you the display update driver and check the status of the issue.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem still exists; Keep the computer in a clean boot, run the Aero Troubleshooter and check the status of the issue.

  Guided Help: the problems of Aero in Windows 7.

  http://support.Microsoft.com/kb/976170?WA=wsignin1.0

  I hope this helps.

• Unable to set the ip address of network client hosted after the creation of WIFI hotspot.

  Original title: PROBLEM CONNECTING WITH MY LAPTOP WIFI HOTSPOT INTERNET

  Hi all

  I am able to use the Internet to my hotspot of the Tower, when the source of the internet is Public or private wifi.

  so I know the cmd commands of window for hotspot and the client settings (sharing of customer hosted network, address assignment IP etc.,)

  but the problem I am facing is slightly different

  I use my datacard to cdma wireless broadband as my source internet connection(Reliance netconnect +)

  When I try to create for this hotspot, as usual I am able to create the hotspot and be able to share the internet for hostednework customer.

  but I am unable to set the ip address for the network hosted client, if I try to put 192.169.137.1 and 255.255.255.0 ip

  as soon as I close the window, the IP also disappears

  When connect my android phone to this hotspot, it is able to connect, but there is no internet connectivity.

  When I check the client for transmission of package hostednetwork every two envoys and received packet is past, I mean transmitting

  So what caused the rupture in internet connectivity but success hotspot connectivity?

  check the screenshots...

  can u help me...

  It's a bit complicated

  

  

  

  

  Hi Daniel,.

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet community.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope this information helps.

• ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)

  I checked archivelog dest everything ok, power logs archived bit time, everything ok, I wondered what could cause this and how to solve this problem permanently.
  
  
  Log queue alerts
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Arc0: Error 19510 closing log file archive ' / archive/gdwp/gdwp_1_18207_654896926.arc'
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:08 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:08 2009
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:11 2009
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:11 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:11 2009
  ORA-16014: log 1 sequence # 18207 not archived, no available destinations

  DBA2008 wrote:
  Notes 560204.1 suggest that to get rid of the generation of the trace file, is - it safe?

  I won't read the note at the moment but would surely say they told you to check the destination where the files are current. Did you do that? Raise a SR with OSS, to get their approval before doing something like what you try. Its you only who would face consequences, good or bad, no one else so better take a safe approach and the first approval of OSS.

  HTH
  Aman...

• HP DeskJet 3632: Printer HP DeskJet 3632 in 'State of the error.

  I bought a printer HP DeskJet 3632 it not so long ago and had some problems setting up, but managed to set up in the end. Now, whenever I try to print something I get the message that his into a 'State of the error' and I can't print. I tried unplugging several times, but I always get the same emssage. Also when it does not print, it's very slow.

  My operating system is also 8.1 but I'm not sure if its 64-bit or 32.

  Hello

  Thank you for using the forum. You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• Unable to set the Alias for the current directory (ACD)

  I am creating an alias of CDA who is also required to define the command ' * DBGOUTFILE *'
  "file" argument
  
  I am running following commands
  
  -& gt; DBGOUTFILE "abc.txt".
  ERROR: The current directory (ORA-36780) Alias is not defined. Cannot complete abc.txt.
  I went ahead and tried to set the ADC using the command
  
  -& gt; CDA ' / slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace'
  ERROR: Slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace (ORA-36784) is a directory name or filename not valid.
  
  In which *'/slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace'* track of directory
  
  No idea how to define CDA (which should be the given alias?)
  
  Thanks in advance for the help
  
  Thank you
  
  Joseph George
  
  
  
  

  Hi Joseph,.

  You must first create a directory.
  SQL > create directory

  as '';
  SQL > grant all the Directory public /;

  Now, you must run the command ADB but make sure that the patch has permission 777 for all folders.

  Thank you
  Brijesh

• HP Deskjet 3632: Specifications on paper Photo Compatible for Deskjet 3632

  I am in digital art and wanted to do something special for my grummum using Photoshop. I want to buy the photo paper to print my work and mentor for her.

  This is the first time I buy photo paper for my Deskjet 3632. Money is tight at the moment and I would like to look at the prices for other brands of photo outside the HP brand paper. The problem is, I don't know what to look for.

  QUESTIONS RELATING TO THE:

  1. what weight of the paper on photo paper is compatible with my printer?

  2. do I need to get some finished paper as not bright, shiny, glossy, soft bright or are they all compatible?

  3. in addition, what is the largest size of paper, I can print on my printer?

  Thank you.

  p.s. It's 3 questions, I ask you to answer.

  @MANDEEx88,

  My apologies for the confusion.

  The section in the specification which provides the weight of the paper is paper tray capacity.

  64 to 90 g/m2 (16 to 24 pounds bond paper) up to 60 sheets of plain paper in the paper
  Envelopes 75 to 90 g/m2 (20 to 24 lb bond envelope) up to 5 envelopes
  Up to 200 g/m2 (110 lb index maximum) up to 20 cards cards
  Up to 280 g/m2 (75 lb bond) up to 20 sheets of photo paper

  Your printing preferences is the source for that glossy surfaces - or not - are appropriate for your printer.  The User Guide provides the recommended list of HP papers.

  When you see a post that will help you,
  Who inspires you, gives a cool idea,
  Or you learn something new.
  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Unable to set the paper size at all when using Firefox built-in PDF Viewer

  I use the built-in Firefox pdf viewer and it's fab.

  But if I try to print, I go to the preview before print and go through the layout and it is useless, because it assumes that my book is almost SQUARE, and the only options I have are portrait and landscape. I use A4 paper, like most of the British and European.

  Of course, I can't work around the preview before printing or that it ends up in the wrong settings by default.

  Adjust (default), it is only based on the width (if I set the margins to zero - it's okay), but lacks the lower half of the page because Firefox think my paper is the PLACE for a reason any.

  The only thing that works is to set the zoom to print at 60% and have tiny everthing, which is ridiculous.

  Any ideas? Is it possible to manually set the width and height of the paper?

  Thanks if anyone can help with this - my alternative is to use the Toshiba reader of PDF files, and it prints terribly to be unreadable. The print quality on Firefox is fine, if I could get to fit on paper...

  Hmm, in your screenshots, why mention the title bar of the window Yahoo mail? Is it an attachment that is somehow embedded in the message? If so, can you find a way to see it in its own tab? Sometimes with the right button > setting > Open Frame in a new tab will do, but I did not open Yahoo Mail to experiment.

• Unable to set the anchor points of the path when the keyframes turned on...

  I have a layer of irregular shape who I am deformation over time (from smallest to largest). I am able to set the anchor points of the path to the forms I want, but once I put two keyframes for the path I'm interpolating a slide, I'm more able to set the anchor points for minor changes, for example, I am unable to draw the Bézier handles. If I disable keyframes, then I am allowed to adjust the anchor again, but that means I have to start whenever I need to make an adjustment. I have run successfully the concept but need to change several layers of form in this way, and not having is not access to the Bézier handles point of anchorage slows productivity.

  Any ideas?

  Thanks in advance,

  Chris

  12.2.1.5 AE

  Mac 10.9.4

  Sorry, I missed the rather obscure reference to an expression in the first post you. Had, I had to pay more attention I'd say disable the expression to change the path, and then select. Not being able to select a top with the marks of perfectly logical on expression because it is turned on with the full path is selected by the expression of all time. This is how work expressions. This seems to be a lot of trouble to go just to change the "timing" of a couple of keyframes.

• Tecra M7: Unable to set the screen resolution to 1680 x 1050 on external screen

  I have a M7 and a 1680 x 1050 VX2025 viewsonic monitor.
  I can't set the resolution for external display in clone mode or dual mode.
  Infact I can not get any resolution of the screen to exit the M7.

  I tried this in Windows XP and Vista with drivers from the toshiba Web site.

  Any ideas on how to force this resolution?

  Thank you

  Hello

  Are you sure that the graphics card supports this high resolution!
  If all goes well it s not a material limitation

  But especially if the display resolution is not available the graphics card driver does not support this resolution of the screen.
  In this case only the new driver installation and usage help

  What graphics card is installed on your laptop? Graphic chip Intel?
  If you use an Intel graphics card, then I recommend to visit the Intel page and search for a compatible driver on this page. Some users here in the forum said that the Intel drivers could help choose the preferred resolution.

• Unable to set the display resolution, Intel HD 4600 in Device Manager displays ' generic non-pnp monitor low resolution.

  I am slot as Windows 7 Pro on a Dell Intel 64 bit pc with a screen HD Dell I5 and Intel HD graphics 4600 driver.  PC woke up a few hours of inactivity, after no updates known to windows or other programs, with icons and pages double size beyond the limits of the monitor, setting the low resolution and Device Manager showing ' no generic pnp monitor low resolution ' instead of 'Monitor Dell HD' and no option to increase the resolution.  No help with reset, not restoration, disconnection and reconnection monitor auto plug n Play, 'Search new device', 'add a device', update of the graphics driver, reinstall the drivers from the Dell monitor.  Troubleshooting peripheral reported to date and working correctly.  After I finally uninstalled driver restarted, and graphic displays "default monitor" Device Manager (no longer "generic low resolution"), no graphics driver identified, but don't allow me to change to a higher resolution.  New windows had to be individually size / expanded to fill the screen.  This can be corrected?  I want to optimize my display settings for this monitor.  I have reinstall my graphics driver or just be happy that I can use my computer?  Thank you.

  Call Dell.  Your monitor should have a 3-year warranty.  Your matching OptiPlex with a warranty of one year more.

  Also, check all the hidden and invisible buttons on the monitor.  Someone may have inadvertently changed one of these.

• Unable to set the icon of my application

  Hello everyone, I tried to create my icon of the application according to this link with Blackberry Java plug-in for Eclipse. But I can't find "use as the Application icon" when I right click my picture file. Can someone help me put the icon for my application? Thank you.

  the article refers to the JDE, which is the old environment.
  in eclipse, you set the icon in your application descriptor file.

• Unable to set the photo as a screensaver

  Title: photo screensaver does not

  When my screensaver is due to kick in that I get a message (I assume this is related to the screensaver) who says that there is no disc in the drive.  This happens intermittently.  Any ideas please?

  Hello

  Welcome to the Microsoft community.

  I understand from the description of the issue that you are having problems with the introduction of screen saver. I will definitely help you with this problem.

  (1) what is the error message exactly are now you?

  (2) Wht what you mean by "screensaver is due to kick? '

  (3) you try to set a screensaver to all photos in the CD/DVD drive?

  (4) what is the exact location of the file on the computer?

  (5) is the issue limited only with the specific screen saver?

  (6) do you have this problem when you set the default screen saver?

  I suggest you follow the steps from the link to the photos as screensaver and check if it helps.

  Fixed problems with Windows Live Photo Gallery that does not

  http://Windows.Microsoft.com/en-us/Windows7/use-pictures-as-a-screen-saver

  For reference:

  Change your screen saver

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-saver

  Response with more information to help you further.

• Unable to set the Current Row key

  Dear all,
  
  I thought this for awhile. Kindly help me please on what is the problem with this code.
  
  I can access my required iterator in my managed bean and I wanted to programmatically set the
  current line with this pseudo-code.

  Row[] rowDatas = someBindings.getAllRowsInRange();
  for (int index = 0; index < rowDatas.length; index++) {
       Row rowTemp = rowDatas[index];
       if (someCondition == true) {
            someBindings.setCurrentRowWithKeyValue(rowTemp.getKey().toStringFormat(true));
            break;
       }
  }

  I wanted to find all the rows in my iterator, that's why I call getAllRowsInRange()
  Loop through all the lines, then find a row that matches a condition. The value of this line as the key of the current line.
  
  My problem is that it doesn't define the current row to the row that matches my criteria.
  One reason behind this?
  
  I'm stuck with this for a while...

  Hello

  Just check wat this line is back: rowTemp.getKey () .toStringFormat (true)

  It returns the value of the current key (i.e. 100) or something like long number 271367896897890709890.

  setCurrentRowWithKeyValue(); will only the exact value.