Deskjet 6540 print missing some colors

Similar Questions

• DeskJet 6540 prints slowly

  Since a computer desktop and laptop, each running Windows 7 at home, the printer suddenly became very slow.  As a passage of the head every 15 to 30 seconds.  Follow-up of all the guides, I have found, through a complete reboot and try different USB ports.  Print test page, it says error code: 05F37C2B.

  This is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• PDF Editor, missing some color

  I am trying to create a PDF using MS Publisher 2007 and Acrobat plug-ins, X.  The resulting image has no color, MOST but not all.  In addition, some black lines disappear.  What would cause this? I did my color printer is selected, before the creation of pdf. I can give an example if necessary.

  Don't know what to suggest other than to play with the color settings in the parameters of work (possibly save in a new settings file). I don't deal with color a lot, but if you go back and forth between RGB and CMYK, that sort of thing can happen as I understand it.

• HP Deskjet 6540 prints pink

  pictures of pink print

  Please try the below document and check if this may help resolve the issue

  http://support.HP.com/us-en/document/c00219782

• HP 6540: HP Deskjet 6540 driver needed

  https://support.HP.com/us-en/contact-HP/product/HP-DeskJet-6540-Printer-series/357210/model/357212?s...

  Printer still very good condition.  Windows 7 repair facility now can not get printer to work.

  Installation CD is obsolete.

  Cannot get Windows 7 Home Premium CD to install the driver.

  Sometimes I can get HP Deskjet 6500 Series to appear in the Device Manager, then it disappears.

  Also where is the HP printer drivers on the Windows 7 Home Premium disc?

  This printer has worked without problem for years, worked on this years Dell desktop computer.

  Just need a little help.

  Thank you

  TxTrapper

  South of Texas

  @TxTrapper

  Good news.

  Thanks for the post:

  I fixed (and tested) the link to the driver in my original post.

  If you decide to install the software of full functionality (from link), create a Restore Point first!

  Help, suggestions and examples:

  Install the full features software - printer

  NOTE: If the computer has been recently migrated to Windows 10 or if you need to re - install the printer software:

  1. Create a Restore Point >
  2. Download a new copy of the Full Feature software >
  3. Remove any printer software existed for programs and features / applications and features / all Apps >
  4. Restart computer and log in >
  5. Install Full software functionality (found in your downloads folder > double-click the file) >
  6. Restart computer and log in to complete the installation

  Article (s) of interest include:

  • Preparation
  • Extras and optional > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printer software
  • Download and Installation
  • ...

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Deskjet 6540 Vista

  My HP Deskjet 6540 printer will not print, under 'status' error is displayed.   Help

  You are able to print a self-test of the printer page?

  Is - this error message on the printer or the computer?

  You can run the doctor print and scan and check the results.

  http://support.HP.com/us-en/document/c03275041

  Let me know the results.

• DeskJet D2360: Deskjet 2360 - prints wrong colors, even if the test page seems well

  In 10 (64-bit) Windows, Deskjet D2360 prints the well test page, but the colors aren't any application (documents, photos...). Cyan looks like dark blue. Green also appears dark blue. I just updated the drivers from the HP website, but the behavior remains the same.

  The problem appeared after Windows 10 updates (January 2016 and later versions).

  Print and Scan Doctor couldn't fix it. Help!

  (Suggestion: If your printer prints the test page, why not propose an image file with what the test is supposed to look like.) This is useful especially to confirm colors. If I have a print test and see a few squares of color, how could I know if they are the correct colors?)

  After a long period of frustration, I found the non-professional magic solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/printer-prints-wrong-colors-after-Windows-10-update/TD-p/5242565/highlight/false/page/3

  Print a test page with HP print and Scan doctor. Once the problem is resolved.

• DeskJet F4140: Printer prints wrong colors after updating windows 10

  Hi all

  This is my first post here on the forums and it's a doozy.

  I've updated my laptop last night from 8.1 to win to win 10.  Power seems to work well except my Deskjet F4140 printer. It prints, but the colors are false.  bruises are red, red green, green are "purple", made for an interestng very a first impression. I did all the usual stuff, troubleshooting, test the page clean and align the heads. Uninstall and reinstall to make sure it was getting the windows 10 driver, but alas my problem remains. I tried to find a way to change the mode of compataibility and can't find my file .exe for the printer. I know it's and older printer, but it works like a top and I'd hate to have to replace it because of this problem.

  TLR

  update to win 10 and colors are off like hell.

  Thank you

  Robbie

  Finally fixed my printer not through HP. What I had to do is access the so-called Godmode on windows 10. It allows to access all the parameters of the user as well hidden and non-hidden in one place. I went down to my printer and changed its functioning as windows 8.1 and it works as it should. You should be able to learn more about the Google's God mode command line script. Thank you and good night.

• Deskjet 6540 Fast print quality loses chutes

  I am running Windows 8.1 64-bit. I've owned this printer HP Deskjet 6540 for a long time now, so part of me wondered if I should just buy a new printer. However, it works great except for this last issue. In the last few weeks, I started to notice that when I print in draft mode, normal, or fast, the text at the bottom of paragraphs or the end of a page is cut off, wasting the descenders on letters on this line. All retired with hp print and scan doctor. Pilots seem to, etc. If I print in "best" mode, it works fine, with no clipping. He is a recent problem. Any ideas?

  The issue you describe could be caused by an electrical problem between the printer and the cartridge.   I suggest you clean the contacts of the cartridge and printer as shown in the document here.

• Deskjet 1000 printer - J110a: printer prints a blank Page - HP anthentic color and black ink cartridges are full

  Used this printer for months without problem until he ran out of color ink. Buy genuine HP color ink on amazon and replaced the empty color ink.  Installed the latest driver. Printer seems to work fine except the rest blank page. HP Print and Scan Doctor 4.9 finds no errors, no problem.  Cleaning print head. Aligned printhead printed normal test result on the page. Results of tests on white page. Yet performance printer continues to give green checkmarks on all issues. No error found.  I followed the video instructions from HP customer support, but the problem persists.  http://support.HP.com/us-en/product/HP-DeskJet-1000-Printer-series---J110/4066042/model/4066376/docu...

  Given that you've tried the HP web site, try these videos Youtube here.

  https://www.YouTube.com/results?search_query=DeskJet+1000+print+head

  Find out more if necessary.  If no joy, your printer is toast.

• DeskJet F2280: Printer prints wrong color

  Hello

  I have a DeskJet F2280, when my laptop Lenova with Win 10 printing all colors are OK, but when I plug the printer on my laptop HP with Win10 it prints blue colors in red, in all programs.

  I tried to reinstall the driver but it back no help.

  Can anyone help?

  Arne

  Hi @Arne2,

  Welcome to the Forums of HP Support! I see that you are having problems, print the correct colors, just the computer Windows 10. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Try another application, to see if you have the same results.

  I wasn't sure if you meant that you have downloaded and installed the full feature software, or if you use the preinstalled Windows drivers. Here is the link to the full feature software: DJ_AIO_03_F2200_NonNet_Full_Win_WW_140_404 - 4.exe

  If you haven't already done so.

  You can check the settings of the print using this paper driver, HP printers - change the print settings (Windows 8).

  Do not take into account the title.

  You can also download and run the print and Scan doctor, he will diagnose the problem and could solve it automatically.

  What were the results when you ran the Print and Scan Doctor?

  Please let me know the results and if there is anything else I can help you. Thank you.

• HP Deskjet 3050 printer color printing is disabled

  Original title: help, please!

  I have a HP Deskjet 3050 printer.  When I try to print colored ephemera that I bought and downloaded from Etsy, the color is off and the image lost its detail.  The downloaded images are in JPEG format.  When I consult the in file folder they are in, they look beautiful, but when I print, they are terrible and useless.  I installed new color and black cartridges and tried the digital paper.  Nothing helps.  Any suggestions?

  Hello

  What version of the windows operating system is installed in the computer?

  Method 1:

  If you are using windows 7, I suggest you to see link and check.

  Choose printing options

  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

  Method 2:

  I suggest you to see link and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02206095&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=4066450&prodTypeId=18972

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=130&prodSeriesId=4066450&prodTypeId=18972&ObjectID=c02109592

  See also:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• DeskJet 4645: I have Deskjet 4645. When HP650 color is finished, I get annoying messages & can't print, you I on

  I have Deskjet 4645. When HP650 color is finished, I get messages annoying & cannot print, you print only in black & white. Why?

  The printer should be printing single cartridge - remove the color cartridge and set it aside, then print with just the black cartrdige.  There are warnings that the printer is in mode single cartridge, you may need to press OK on the front panel or driver to proceed

  See page 77 here user guide for more information on the mode of single cartridge.

• Printer Epson stylus CX 6600 print perfectly all colors except black who is hitting and missing

  Printer Epson stylus CX 6600 print perfectly all colors except black who is hitting and missing

  This looks like a printhead clogged for me.
  It's more of an Epson problem than a problem of Windows.
  Check the Web site of the Epsom for utilities seeking to lead the printheads.

  Here is a link to the CX6600 troubleshooting page:
  <>http://www.Epson.com/cgi-bin/store/support/erscripts/start_er.jsp?BV_UseBVCookie=Yes&OID=41664 >

  HTH,
  JW

• Printer Deskjet 6540 - no light showing

  Printer does not work.  All the LIGHTS are OFF but the power cord is connected.  Printer was working fine but do not turn on in the morning when we turned on eveything.

  Hello happycycler,

  I'm sorry to hear that your Deskjet 6540 will power not on.

  I suggest to reset your printerplug directly into the wall, avoiding bars, surge protectors, etc.

  You can also try a different wall jack and another power cord if you have another one that is available.

  I hope this helps.

  Kind regards