Printer Epson stylus CX 6600 print perfectly all colors except black who is hitting and missing

Similar Questions

• Only Word documents will print in all colors except black, even if I just bought a black ink cartridge

  I have the screen things different impressions on the internet and all the colors showed up... even black.  Any ideas on what could be the problem

  Hello

  I would like to know the out come of the steps in my previous post. You can also follow the steps in the link below.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Given that the problem is related to Microsoft Office Word, I suggest you to post the question on Community Support in Microsoft Office Word.

  Community office

  http://answers.Microsoft.com/en-us/Office/Forum/Word?tab=all

  Write us with the State of the question.

• Canon MG5200 printer prints all colors except black in pink. So I can get black and pink print

  My printer is all colors except black in pink.  So I can get black and pink print

  Hello

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, their books online and
  drivers and ask in their forums (if any).

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Blue print in all colors

  Good evening, everyone.

  I have a printer J4680 AIO that I had for a while. Last night, I installed the new ink and ran a test page and it looked ok, but when I went to print a chart, I noticed that the colors were COMPLETELY shut down.

  I went online and print a test page which includes all colors including shade and hue of these colors.

  The result is... interesting...

  The yellow is a lime.

  Red is a deep blood red

  Magenta is magenta, but deeper... almost purple in hue

  Black is fine

  The Green is very good.

  Blue is fine

  Cyan is fine

  What it boils down to, is that cyan is printing in all colors.

  Anyone had this happen and have any idea of a resolution for this? I do a lot of graphic design and when I am doing a project that does not require my printer super high resolution (aka REALLY expensive of ink), I need it to be precise.

  EDIT:
  I should mention that I use ink official HP (901) so I know it is not the question (or shouldn't be).

  Be troubleshooting steps described here can help, it seems that you have in the mixture of the color cartridge.  It is unlikely that running a cleaning cycle will solve this problem, you will probably need a new cartridge.  You can check the warranty on the cartridge (valid even if the printer is no longer guaranteed) as indicated in the paper here.

  A new cartridge will almost certainly fix the problem.

• printer Lexmark Pro 200. Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Printer Lexmark Pro 200.  Does not print the correct colors. I restarted my computer and the printer is off but get the same result.

  Hello

  • What were the changes made before the problem occurred?

  You try to run this fix and check.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  If above does not work, try contacting Lexmark support for assistance.

  http://www1.Lexmark.com/en_US/global-services/customer-support-services/index.shtml

• printer is, BUT only with black and blue, all other diagnoses print with all colors

  Initially, the installation of the printer REFUSED to align, took 7 attempts (OK, I've heard of Einstein quote!). Whenever I used the printer to ALIGNER PRINTER screen - the process has failed. So I looked on the web, and:

  Clean the cartridges,

  Erased the vents

  Removed and cleaned the print head

  Prayed

  Tried again

  To nothing not done, so I tried to make the diagnosis via PC software and here deepened the mystery.

  When the HP Photosmart B210 series Toolbox running I got three different results between the three print options

  A Diagnostics Page of print quality gave me five Ba's maximum color printing

  Align the print heads gave me the black and blue boxes/lies/grids and the message alignment successful

  The print Diagnostic information gave me all four colors with a lot of useful info, including the print head 73 calibration trust level: 0

  Ideas anyone, before I bin it and buy a Kodak or disgusted Epson

  What exactly is the problem?  Alignment aligns the print head color to the black print head, and black and one color (cyan for your printer) are required for this.  (There is probably an extra set of blocks that prints gray blocks fade to white.  This section is used to calibrate the energy for the colors).  The other test pages that you printed will be print various diagnoses or test pages that will use all colors.

  A successful alignment page requires the page be printed on white paper not used and requires that the cyan and black sections print correctly.

• How can I get my Canon i550 printer to print with all colors. Cleaned and aligned and there are a lot of ink, but do not print correctly.

  Print all colors with the exception of cyan, so blue and green print under rose.  I have cleaned the nozzles according to the instructions, there is a lot of ink in each cartridge and it worked a few days ago.

  Hello

  Check with Canon support, their documentation and online drivers. As Canon OEM is responsible for
  for the proper functioning of the printer and drivers provided.

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  I hope this helps. Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• All colors but black yellow print

  I'm printing to a QuadCore intel mac running 10.6.8 an HP2600n from a few days ago, each doc print from my mac for this printer that has all colors other than yellow what looks black. It happens with all programs and MS Word documents, Preview & Acrobat. They look fine on the screen, but don't not when printing. If I send a doc to my colleague, it can print from their computer very well.

  I installed the drivers for the printer, but it did not help. Any suggestions?

  Thank you!

  Ok

  what you can try is to remove the old driver software print and then replace HP driver by using the Apple software updates.

  Open preferences system, print, and fax - and command, then click the name of the printer queue.  System should ask if you want to reset the printing system.  I do not know if you have any other connected printers, but be aware that if you say yes, it will remove all your queues from the printer and the driver files.

  If you deleted files (reset) the printer driver, then you can "Add printer" and the system should prompt you to download driver from Apple

  the process above it seems you reasonable?

• LaserJet M750dn: LaserJet M750 light print in all colors

  I printed the print quality troubleshooting pages and all the colors are uniformly low (no streaks or lines). I checked to make sure that the printer was connected to the wall and not a surge protector. I have cleaned the inside, checked the contacts of high voltage and ran the Windows Laser cleaning procedure. I also ran a full calibration. None of this has worked. Then I went in pre-launch and cleaned the disc then updated the firmware to the last 2305090_000473.

  The client uses the brand HP toners. The transfer Kit is 90% and in good shape, so it is hard to imagine that it is defective. Should I try one or both power supplies high voltage? There a PCA HV of imagery and a secondary transfer HV ACP? Who would try? Or both?

  I replaced the secondary transfer HVPS to solve the problem. So happy that the repair has been resolved.

• OfficeJet 6500 new black cartridge installed, but print Brown (all colors) instead

  Hello

  I replaced the black cartridge in my OfficeJet 6500, and clicking on it.  (I triple checked it.)  However, when I try to print a document that is supposed to be any black ink, it prints in a Brown shade as if it is mix inks instead of using black-colored.   I printed a diagnostic page, cleaned and alignment of the heads of print and even restarted the computer and the printer.  Nothing helps!  I am still at work and I have documents that need to be printed!

  Do you have any suggestions?

  Thank you!

  What operating system do you have?  For Windows 7, you would go to start, devices and Printerss, right-click on the Officejet 6500 and then select Printing Preferences.  You can change the setting 'document Type' in the tab 'Features', then click on apply.

  The above will change the default value.  You can also change the print to a particular print job by selecting the print properties when you go to print.

  

• Do not print in all colors

  I have an OfficeJet Pro L7590

  I tried to print something with a clip, but the colors were incorrect. I then used the align printing functionality and it printed yellow, magenta and black but not cyan. I changed the cyan cartridge (even if she did not show empty on the Panel), but even once it does not print on the cyan. I don't know what steps I can take to fix this problem. Your help would be very appreciated.

  Thank you.

  Looks like you have a dead cyan printhead.  I'm sorry.

• Cannot print anything in color, except for the ink-jet printer test page

  All prints black and white with the exception of when I print a test page for the printer itself (Dell v313).  Had no problems with it.  I called Dell and they want $129 to 'fix' my Windows problem.  No errors.  Have full ink cartridges.  Also recently installed drivers and firmware for the printer, thinking that might solve the problem.

  Hi Monte,

  Did you recent hardware or changes to the software of the system?

  Method 1:

  You can view the following items from Dell support and check if help.

  Printer does not recognize the ink cartridge

  Troubleshooting of printhead Dell V313w AIO, V515w, V715w, P513w and printers P713W

  Method 2:

  Alternatively, you can try to uninstall and reinstall the printer drivers and check.

  a. Click Start. In the start search box type "devmgmt.msc", and then press ENTER.

  b. expand the "Printer", double-click the entry for the device.

  c. click on the "Driver" tab, click "Uninstall".

  d. Click Start. In the start search box type "appwiz.cpl", and then press ENTER.

  e. remove all entries related to the network card.

  You can check the Dell support to address following link and install the latest version of the drivers.

  Dell V313 AIO inkjet printer

  Hope this information is useful.

• The printer Epson Stylus 630 and Vista error

  Just purchashed Epson Stylus 630 wireless all in one printer, added to the WiFi network successfully and can print from all accesoriess except the laptop computer with Vista 64-bit. Drivers are correct, I can scan using this computer, but when the print queue shows "error printing" no additional error information. Everything seems correct still cannot print.  Help!

  Hello

  Download and run the tool of diagnosis from the link below and check if this solves the problem.

  Problems printing and printing errors:
  http://support.Microsoft.com/mats/printing_problems

  Also check out this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print all programs except

  I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print to all programs except the HP Image Zone. It shows the right default printer. When I print a photo 4 x 6 prints only part, and it is slightly enlarged. My operating system is Windows XP. Do you need any other information? Thank you. Peggy

  Hi PeggyOlson,

  It is an older program used with your 2570. Try to download and install the new photo software from the link below.

  HP Photo Creations

  HP Photo creation FAQ

• (Redirected) Print color/non-black on series 5200N

  Win7, series B & W printer, IE11, Gmail and AOL 5200N, Vista Driver (I think).

  I tried 10 or more different solutions suggested to obtaining by series 5200N convert all colors / non-black (gray, cyan re.g.) in pure black and white for printing readable (too many diagrams). None of them work or have settings that I have not yet. TIS includes checking the box "black a white only" in the menu printing.

  Often I am forced to print to a color printer, a whole, but that is expensive, slow and useless for large documents. I'm reluctant to get rid of the series 5200N as it is a workhorse ready without problem and most of my work can shoot with B & W output as long as it is readable.

  Can anyone help? (No fonts, no color settings change please for prints of the internet (cannot be) or are usually cut/paste/Word/print solutions, one screw up in shape or lose the photos.) Thanks in advance.

  Tery [name deleted by policy TOU, Admin note] TD

  Hi tcritchley07,

  Please repost this in the printers for the most expert forum.

  http://en.community.Dell.com/support-forums/peripherals/f/3528